Convert sleep_on() to wait_event_timeout().  Probably safe with the BKL but
could be racy once BKL use in NFS-client is gone.
Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 Clean up: Every ULP that uses the in-kernel RPC client, except the NLM
 client, sets cl_chatty.  There's no reason why NLM shouldn't set it, so
 just get rid of cl_chatty and always be verbose.

 Test-plan:
 Compile with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 We'd like to hide fields in rpc_xprt and rpc_clnt from upper layer protocols.
 Start by creating an API to force RPC rebind, replacing logic that simply
 sets cl_port to zero.

 Test-plan:
 Destructive testing (unplugging the network temporarily).  Connectathon
 with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
 Probably need to rig a server where certain services aren't running, or
 that returns an error for some typical operation.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Add RPC client transport switch support for replacing buffer management
 on a per-transport basis.

 In the current IPv4 socket transport implementation, RPC buffers are
 allocated as needed for each RPC message that is sent.  Some transport
 implementations may choose to use pre-allocated buffers for encoding,
 sending, receiving, and unmarshalling RPC messages, however.  For
 transports capable of direct data placement, the buffers can be carved
 out of a pre-registered area of memory rather than from a slab cache.

 Test-plan:
 Millions of fsx operations.  Performance characterization with "sio" and
 "iozone".  Use oprofile and other tools to look for significant regression
 in CPU utilization.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ...and make sure that the "intr" flag also enables SIGHUP and SIGTERM to
 interrupt RPC calls too (as per the Solaris implementation).
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Shrink the RPC task structure. Instead of storing separate pointers
 for task->tk_exit and task->tk_release, put them in a structure.

 Also pass the user data pointer as a parameter instead of passing it via
 task->tk_calldata. This enables us to nest callbacks.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the call to xprt_transmit() fails due to socket buffer space
exhaustion, we do not need to re-encode the RPC message when we
loop back through call_transmit.

Re-encoding can actually end up triggering the WARN_ON() in
call_decode() if we re-encode something like a read() request and
auth->au_rslack has changed.
It can also cause us to increment the RPCSEC_GSS sequence number
beyond the limits of the allowed window.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 For privacy we need to allocate extra pages to hold encrypted page data when
 wrapping requests.  This allocation may fail, and we handle that case by
 waiting and retrying.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Currently, call_encode will cause the entire RPC call to abort if it returns
 an error. This is unnecessarily rigid, and gets in the way of attempts
 to allow the NFSv4 layer to order RPC calls that carry sequence ids.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 After a server crash/reboot, rebinding should always retry, otherwise
 requests on "hard" mounts will fail when they shouldn't.

 Test plan:
 Run a lock-intensive workload against a server while rebooting the server
 repeatedly.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This reverts 17f4e6febca160a9f9dd4bdece9784577a2f4524 commit.

 Currently rpc_mkdir/rpc_rmdir and rpc_mkpipe/mk_unlink have an API that's
 a little unfortunate.  They take a path relative to the rpc_pipefs root and
 thus need to perform a full lookup.  If you look at debugfs or usbfs they
 always store the dentry for directories they created and thus can pass in
 a dentry + single pathname component pair into their equivalents of the
 above functions.

 And in fact rpc_pipefs actually stores a dentry for all but one component so
 this change not only simplifies the core rpc_pipe code but also the callers.

 Unfortuntately this code path is only used by the NFS4 idmapper and
 AUTH_GSSAPI for which I don't have a test enviroment.  Could someone give
 it a spin?  It's the last bit needed before we can rework the
 lookup_hash API
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 In fact, ->set_buffer_size should be completely functionless for non-UDP.

 Test-plan:
 Check socket buffer size on UDP sockets over time.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Each transport implementation can now set unique bind, connect,
 reestablishment, and idle timeout values.  These are variables,
 allowing the values to be modified dynamically.  This permits
 exponential backoff of any of these values, for instance.

 As an example, we implement exponential backoff for the connection
 reestablishment timeout.

 Test-plan:
 Destructive testing (unplugging the network temporarily).  Connectathon
 with UDP and TCP.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Add a generic mechanism for skipping over transport-specific headers
 when constructing an RPC request.  This removes another "xprt->stream"
 dependency.

 Test-plan:
 Write-intensive workload on a single mount point (try both UDP and
 TCP).
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Clean-up: change some comments to reflect the realities of the new RPC
 transport switch mechanism.  Get rid of unused xprt_receive() prototype.

 Also, organize function prototypes in xprt.h by usage and scope.

 Test-plan:
 Compile kernel with CONFIG_NFS enabled.

 Version: Thu, 11 Aug 2005 16:07:21 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Clean-up: get rid of unnecessary socket.h and in.h includes in the generic
 parts of the RPC client.

 Test-plan:
 Compile kernel with CONFIG_NFS enabled.

 Version: Thu, 11 Aug 2005 16:06:23 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Move the bulk of client-side socket-specific code into a separate source
 file, net/sunrpc/xprtsock.c.

 Test-plan:
 Millions of fsx operations.  Performance characterization such as "sio" or
 "iozone".  Destructive testing (unplugging the network temporarily, server
 reboots).  Connectathon with v2, v3, and v4.

 Version: Thu, 11 Aug 2005 16:03:38 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Implement a best practice:  for soft mounts, an rpcbind timeout should
 cause an RPC request to fail.

 This also provides an FSM hook for retrying an rpcbind with a different
 rpcbind protocol version.  We'll use this later to try multiple rpcbind
 protocol versions when binding.  To enable this, expose the RPC error
 code returned during a portmap request to the FSM so it can make some
 decision about how to report, retry, or fail the request.

 Test-plan:
 Hundreds of passes with connectathon NFSv3 locking suite, on the client
 and server.

 Version: Thu, 11 Aug 2005 16:01:53 -0400
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 For internal purposes, the rpc_clnt_sigmask() call is replaced by
 a call to rpc_task_sigmask(), which ensures that the current task
 sigmask respects both the client cl_intr flag and the per-task NOINTR flag.

 Problem noted by Jiaying Zhang.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Acked-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Currently we return -ENOMEM for every single failure to create a new auth.
 This is actually accurate for auth_null and auth_unix, but for auth_gss it's a
 bit confusing.

 Allow rpcauth_create (and the ->create methods) to return errors.  With this
 patch, the user may sometimes see an EINVAL instead.  Whee.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Ensure that we don't create an RPC client without checking that the server
 does indeed support the RPC program + version that we are trying to set up.

 This enables us to immediately return an error to "mount" if it turns out
 that the server is only supporting NFSv2, when we requested NFSv3 or NFSv4.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 This saves us a couple of lines of cleanup code for each call.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Fix up call_header() so that it calls xdr_adjust_iovec().
 Fix calculation of the scratch buffer length in xdr_init_encode().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!