- 29 8月, 2005 7 次提交
-
-
由 Kalle Valo 提交于
With my Buffalo WLI-CF-S11G PC Card kernel oopses every time in prism2_interrupt() when I try load the hostap module. local->hw_priv is null during the first call to prism2_interrupt(). It feels like interrupts are enabled too early, or something. This patch fixes the symptom, but not the cause. Signed-off-by: NKalle Valo <Kalle.Valo@iki.fi> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jouni Malinen 提交于
hostap_cs: 0.4.1-kernel (Jouni Malinen <jkmaline@cc.hut.fi>) pcmcia: hostap_cs: invalid hash for product string "BUFFALO": is 0x1b01a57b, should be 0x2decece3 pcmcia: see Documentation/pcmcia/devicetable.txt for details pcmcia: hostap_cs: invalid hash for product string "WLI-CF-S11G": is 0xefd5102a, should be 0x82067c18 pcmcia: see Documentation/pcmcia/devicetable.txt for details This patch fixes them. Signed-off-by: NKalle Valo <Kalle.Valo@iki.fi> Signed-off-by: NJouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jouni Malinen 提交于
Version 0.4.4 of Host AP driver was released, so let's sync the version number in netdev-2.6 tree. Signed-off-by: NJouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jeff Garzik 提交于
-
由 Jouni Malinen 提交于
Debug variables and procfs dir should be "ieee80211", not "ipw". Signed-off-by: NJouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jouni Malinen 提交于
IEEE 802.11 code has no business touching payloads of EAPOL frames. There are some EAPOL structures defined for debugging and these were confusingly called EAP types which they are not. Let's just remove these before someone else starts using them in the kernel. Signed-off-by: NJouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jouni Malinen 提交于
No need to maintain support for WIRELESS_EXT < 17 since this kernel tree is already using WIRELESS_EXT 18. Signed-off-by: NJouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 26 8月, 2005 13 次提交
-
-
由 Jeff Garzik 提交于
-
由 Jeff Garzik 提交于
-
由 Jiri Benc 提交于
From: Michael Wu <flamingice@sourmilk.net> This patch: - fixes misc. whitespace/comments - replaces u16 with __le16/__be16 where appropriate Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
From: Gertjan van Wingerde <gwingerde@home.nl> Attached patch cleans up the long lists of #defines for status codes, reason codes, and information elements. Signed-off-by: NGertjan van Wingerde <gwingerde@home.nl> Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
From: Gertjan van Wingerde <gwingerde@home.nl> Attached patch updates the definitions of the generic ieee80211 stack to the latest versions of the published 802.11x specification suite. Signed-off-by: NGertjan van Wingerde <gwingerde@home.nl> Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
This removes one trap for a programmer, few unused macros, and one unused struct. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
From: Imre Deak <imre.deak@nokia.com> I had a problem where doing an open after a close left the device unusable. netif_carrier_on should be called whenever we go to the associated state, but this is not so in case of a close->open sequence. Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
Signed-off-by: NJiri Benc <jbenc@suse.cz> Signed-off-by: NJirka Bohac <jbohac@suse.cz>
-
由 Jiri Benc 提交于
From: Adrian Bunk <bunk@stusta.de> This patch contains the following possible cleanups: - make needlessly global code static - remove the unused IPW_DEBUG_ENABLED Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
From: Pavel Machek <pavel@ucw.cz> ipw2100 uses custom debug prints that are sometimes longer and always harder to read than normal printk. They also introduced some bugs where prefix is printed twice. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
From: Pavel Machek <pavel@ucw.cz> ipw2100 uses strange X__ prefixes even for symbols already prefixed by ipw2100. Fixed. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NJiri Benc <jbenc@suse.cz>
-
由 Jiri Benc 提交于
Signed-off-by: NJiri Benc <jbenc@suse.cz> Signed-off-by: NJirka Bohac <jbohac@suse.cz>
-
- 24 8月, 2005 20 次提交
-
-
由 Jeff Garzik 提交于
-
由 Jeff Garzik 提交于
Hand-fix merge conflict in drivers/usb/net/zd1201.c.
-
由 Linus Torvalds 提交于
Too many changes to release a final 2.6.13.
-
由 Deepak Saxena 提交于
As pointed out in the following thread, the CLOCK_TICK_RATE setting for IXP4xx is incorrect b/c the HW ignores the lowest 2 bits of the LATCH value. http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2005-August/030950.html Tnx to George Anziger and Egil Hjelmeland for finding the issue. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
This keeps the kernel/cpuset.c routine update_cpu_domains() from invoking the sched.c routine partition_sched_domains() if the cpuset in question doesn't fall on node boundaries. I have boot tested this on an SN2, and with the help of a couple of ad hoc printk's, determined that it does indeed avoid calling the partition_sched_domains() routine on partial nodes. I did not directly verify that this avoids setting up bogus sched domains or avoids the oops that Hawkes saw. This patch imposes a silent artificial constraint on which cpusets can be used to define dynamic sched domains. This patch should allow proceeding with this new feature in 2.6.13 for the configurations in which it is useful (node alligned sched domains) while avoiding trying to setup sched domains in the less useful cases that can cause the kernel corruption and oops. Signed-off-by: NPaul Jackson <pj@sgi.com> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDinakar Guniguntala <dino@in.ibm.com> Acked-by: NJohn Hawkes <hawkes@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Andi Kleen 提交于
The code to detect IO links on Opteron would not check if the node had actually memory. This could lead to pci_bus_to_node returning an invalid node, which might cause crashes later when dma_alloc_coherent passes it to page_alloc_node(). The bug has been there forever but for some reason it is causing now crashes. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 lepton 提交于
There's a "return the wrong SKB" error in the GL620A cable minidriver (for "usbnet") which can oops. This would not appear when talking Linux-to-Linux, only Linux-to-Windows (for recent Linuxes). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
i386 floating-point exception handling has a bug that can cause error code 0 to be sent instead of the proper code during signal delivery. This is caused by unconditionally checking the IS and c1 bits from the FPU status word when they are not always relevant. The IS bit tells whether an exception is a stack fault and is only relevant when the exception is IE (invalid operation.) The C1 bit determines whether a stack fault is overflow or underflow and is only relevant when IS and IE are set. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Al Viro 提交于
remove the bogus games with explicit ifdefs on __CHECKER__ Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
handling of %t... (ptrdiff_t) in vsnprintf Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
ac97_plugin_ad1980 should trigger build of ac97_codec Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
non-modular scsi drivers depend on built-in scsi Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
a bunch of PCI-only drivers didn't have the right dependency Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
missing exports on m32r Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
a bunch of functions switched from volatile to __attribute__((noreturn)) and from const to __attribute_pure__ Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
dumb typo: u32 volatile * mistyped as u32 * volatile Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
netpoll is void(struct net_device *), not int(struct net_device *) Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-