提交 797b4f76 编写于 作者: J Jiri Benc 提交者: Jeff Garzik

ipw2100: remove custom debug-print macros

From: Pavel Machek <pavel@ucw.cz>

ipw2100 uses custom debug prints that are sometimes longer and always
harder to read than normal printk. They also introduced some bugs where
prefix is printed twice.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NJiri Benc <jbenc@suse.cz>
上级 19f7f742
......@@ -484,7 +484,7 @@ int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
u32 total_length;
if (ordinals->table1_addr == 0) {
IPW_DEBUG_WARNING(DRV_NAME ": attempt to use fw ordinals "
printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
"before they have been loaded.\n");
return -EINVAL;
}
......@@ -493,7 +493,7 @@ int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
*len = IPW_ORD_TAB_1_ENTRY_SIZE;
IPW_DEBUG_WARNING(DRV_NAME
printk(KERN_WARNING DRV_NAME
": ordinal buffer length too small, need %zd\n",
IPW_ORD_TAB_1_ENTRY_SIZE);
......@@ -546,7 +546,7 @@ int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
return 0;
}
IPW_DEBUG_WARNING(DRV_NAME ": ordinal %d neither in table 1 nor "
printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
"in table 2\n", ord);
return -EINVAL;
......@@ -761,7 +761,7 @@ static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
}
if (priv->fatal_error) {
IPW_DEBUG_WARNING("%s: firmware fatal error\n",
printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
priv->net_dev->name);
return -EIO;
}
......@@ -999,7 +999,7 @@ static int ipw2100_download_firmware(struct ipw2100_priv *priv)
/* load microcode */
err = ipw2100_ucode_download(priv, &ipw2100_firmware);
if (err) {
IPW_DEBUG_ERROR("%s: Error loading microcode: %d\n",
printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
priv->net_dev->name, err);
goto fail;
}
......@@ -1012,7 +1012,7 @@ static int ipw2100_download_firmware(struct ipw2100_priv *priv)
/* s/w reset and clock stabilization (again!!!) */
err = sw_reset_and_clock(priv);
if (err) {
IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
printk(KERN_ERR DRV_NAME ": %s: sw_reset_and_clock failed: %d\n",
priv->net_dev->name, err);
goto fail;
}
......@@ -1206,7 +1206,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv)
* fw & dino ucode
*/
if (ipw2100_download_firmware(priv)) {
IPW_DEBUG_ERROR("%s: Failed to power on the adapter.\n",
printk(KERN_ERR DRV_NAME ": %s: Failed to power on the adapter.\n",
priv->net_dev->name);
return -EIO;
}
......@@ -1266,7 +1266,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv)
i ? "SUCCESS" : "FAILED");
if (!i) {
IPW_DEBUG_WARNING("%s: Firmware did not initialize.\n",
printk(KERN_WARNING DRV_NAME ": %s: Firmware did not initialize.\n",
priv->net_dev->name);
return -EIO;
}
......@@ -1462,7 +1462,7 @@ static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
err = ipw2100_hw_phy_off(priv);
if (err)
IPW_DEBUG_WARNING("Error disabling radio %d\n", err);
printk(KERN_WARNING DRV_NAME ": Error disabling radio %d\n", err);
/*
* If in D0-standby mode going directly to D3 may cause a
......@@ -1488,7 +1488,7 @@ static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
err = ipw2100_hw_send_command(priv, &cmd);
if (err)
IPW_DEBUG_WARNING(
printk(KERN_WARNING DRV_NAME ": "
"%s: Power down command failed: Error %d\n",
priv->net_dev->name, err);
else {
......@@ -1529,7 +1529,7 @@ static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
}
if (i == 0)
IPW_DEBUG_WARNING(DRV_NAME
printk(KERN_WARNING DRV_NAME
": %s: Could now power down adapter.\n",
priv->net_dev->name);
......@@ -1569,13 +1569,13 @@ static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
err = ipw2100_hw_send_command(priv, &cmd);
if (err) {
IPW_DEBUG_WARNING("exit - failed to send CARD_DISABLE command\n");
printk(KERN_WARNING DRV_NAME ": exit - failed to send CARD_DISABLE command\n");
goto fail_up;
}
err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
if (err) {
IPW_DEBUG_WARNING("exit - card failed to change to DISABLED\n");
printk(KERN_WARNING DRV_NAME ": exit - card failed to change to DISABLED\n");
goto fail_up;
}
......@@ -1685,7 +1685,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
(priv->status & STATUS_RESET_PENDING)) {
/* Power cycle the card ... */
if (ipw2100_power_cycle_adapter(priv)) {
IPW_DEBUG_WARNING("%s: Could not cycle adapter.\n",
printk(KERN_WARNING DRV_NAME ": %s: Could not cycle adapter.\n",
priv->net_dev->name);
rc = 1;
goto exit;
......@@ -1695,7 +1695,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
/* Load the firmware, start the clocks, etc. */
if (ipw2100_start_adapter(priv)) {
IPW_DEBUG_ERROR("%s: Failed to start the firmware.\n",
printk(KERN_ERR DRV_NAME ": %s: Failed to start the firmware.\n",
priv->net_dev->name);
rc = 1;
goto exit;
......@@ -1705,7 +1705,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
/* Determine capabilities of this particular HW configuration */
if (ipw2100_get_hw_features(priv)) {
IPW_DEBUG_ERROR("%s: Failed to determine HW features.\n",
printk(KERN_ERR DRV_NAME ": %s: Failed to determine HW features.\n",
priv->net_dev->name);
rc = 1;
goto exit;
......@@ -1713,7 +1713,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
lock = LOCK_NONE;
if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
IPW_DEBUG_ERROR("%s: Failed to clear ordinal lock.\n",
printk(KERN_ERR DRV_NAME ": %s: Failed to clear ordinal lock.\n",
priv->net_dev->name);
rc = 1;
goto exit;
......@@ -1739,7 +1739,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
/* Send all of the commands that must be sent prior to
* HOST_COMPLETE */
if (ipw2100_adapter_setup(priv)) {
IPW_DEBUG_ERROR("%s: Failed to start the card.\n",
printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
priv->net_dev->name);
rc = 1;
goto exit;
......@@ -1748,7 +1748,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
if (!deferred) {
/* Enable the adapter - sends HOST_COMPLETE */
if (ipw2100_enable_adapter(priv)) {
IPW_DEBUG_ERROR(
printk(KERN_ERR DRV_NAME ": "
"%s: failed in call to enable adapter.\n",
priv->net_dev->name);
ipw2100_hw_stop_adapter(priv);
......@@ -1806,7 +1806,7 @@ static void ipw2100_down(struct ipw2100_priv *priv)
spin_unlock_irqrestore(&priv->low_lock, flags);
if (ipw2100_hw_stop_adapter(priv))
IPW_DEBUG_ERROR("%s: Error stopping adapter.\n",
printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
priv->net_dev->name);
/* Do not disable the interrupt until _after_ we disable
......@@ -2413,7 +2413,7 @@ static inline void isr_rx(struct ipw2100_priv *priv, int i,
/* We need to allocate a new SKB and attach it to the RDB. */
if (unlikely(ipw2100_alloc_skb(priv, packet))) {
IPW_DEBUG_WARNING(
printk(KERN_WARNING DRV_NAME ": "
"%s: Unable to allocate SKB onto RBD ring - disabling "
"adapter.\n", priv->net_dev->name);
/* TODO: schedule adapter shutdown */
......@@ -2675,7 +2675,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
break;
default:
IPW_DEBUG_WARNING("%s: Bad fw_pend_list entry!\n",
printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
priv->net_dev->name);
return 0;
}
......@@ -2689,7 +2689,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
&w);
if (w != txq->next)
IPW_DEBUG_WARNING("%s: write index mismatch\n",
printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
priv->net_dev->name);
/*
......@@ -2750,7 +2750,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
switch (packet->type) {
case DATA:
if (txq->drv[txq->oldest].status.info.fields.txType != 0)
IPW_DEBUG_WARNING("%s: Queue mismatch. "
printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
"Expecting DATA TBD but pulled "
"something else: ids %d=%d.\n",
priv->net_dev->name, txq->oldest, packet->index);
......@@ -2797,7 +2797,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
case COMMAND:
if (txq->drv[txq->oldest].status.info.fields.txType != 1)
IPW_DEBUG_WARNING("%s: Queue mismatch. "
printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
"Expecting COMMAND TBD but pulled "
"something else: ids %d=%d.\n",
priv->net_dev->name, txq->oldest, packet->index);
......@@ -3081,7 +3081,7 @@ static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
(unsigned long)inta & IPW_INTERRUPT_MASK);
if (inta & IPW2100_INTA_FATAL_ERROR) {
IPW_DEBUG_WARNING(DRV_NAME
printk(KERN_WARNING DRV_NAME
": Fatal interrupt. Scheduling firmware restart.\n");
priv->inta_other++;
write_register(
......@@ -3101,7 +3101,7 @@ static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
}
if (inta & IPW2100_INTA_PARITY_ERROR) {
IPW_DEBUG_ERROR("***** PARITY ERROR INTERRUPT !!!! \n");
printk(KERN_ERR DRV_NAME ": ***** PARITY ERROR INTERRUPT !!!! \n");
priv->inta_other++;
write_register(
dev, IPW_REG_INTA,
......@@ -3219,7 +3219,7 @@ static irqreturn_t ipw2100_interrupt(int irq, void *data,
if (inta == 0xFFFFFFFF) {
/* Hardware disappeared */
IPW_DEBUG_WARNING("IRQ INTA == 0xFFFFFFFF\n");
printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
goto none;
}
......@@ -3304,7 +3304,7 @@ static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet),
GFP_KERNEL);
if (!priv->msg_buffers) {
IPW_DEBUG_ERROR("%s: PCI alloc failed for msg "
printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg "
"buffers.\n", priv->net_dev->name);
return -ENOMEM;
}
......@@ -3315,7 +3315,7 @@ static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
sizeof(struct ipw2100_cmd_header),
&p);
if (!v) {
IPW_DEBUG_ERROR(
printk(KERN_ERR DRV_NAME ": "
"%s: PCI alloc failed for msg "
"buffers.\n",
priv->net_dev->name);
......@@ -3822,7 +3822,7 @@ int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
err = ipw2100_disable_adapter(priv);
if (err) {
IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
priv->net_dev->name, err);
return err;
}
......@@ -4268,7 +4268,7 @@ static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet),
GFP_ATOMIC);
if (!priv->tx_buffers) {
IPW_DEBUG_ERROR("%s: alloc failed form tx buffers.\n",
printk(KERN_ERR DRV_NAME ": %s: alloc failed form tx buffers.\n",
priv->net_dev->name);
bd_queue_free(priv, &priv->tx_queue);
return -ENOMEM;
......@@ -4278,7 +4278,7 @@ static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
v = pci_alloc_consistent(
priv->pci_dev, sizeof(struct ipw2100_data_header), &p);
if (!v) {
IPW_DEBUG_ERROR("%s: PCI alloc failed for tx "
printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for tx "
"buffers.\n", priv->net_dev->name);
err = -ENOMEM;
break;
......@@ -4589,7 +4589,7 @@ int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
if (!batch_mode) {
err = ipw2100_disable_adapter(priv);
if (err) {
IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
priv->net_dev->name, err);
return err;
}
......@@ -5208,7 +5208,7 @@ static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
if (!batch_mode) {
err = ipw2100_disable_adapter(priv);
if (err) {
IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
priv->net_dev->name, err);
return err;
}
......@@ -5296,7 +5296,7 @@ static int ipw2100_set_key(struct ipw2100_priv *priv,
err = ipw2100_disable_adapter(priv);
/* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
if (err) {
IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
priv->net_dev->name, err);
return err;
}
......@@ -5332,7 +5332,7 @@ static int ipw2100_set_key_index(struct ipw2100_priv *priv,
if (!batch_mode) {
err = ipw2100_disable_adapter(priv);
if (err) {
IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
priv->net_dev->name, err);
return err;
}
......@@ -5880,7 +5880,7 @@ static int ipw2100_wpa_set_param(struct net_device *dev, u8 name, u32 value){
break;
default:
IPW_DEBUG_ERROR("%s: Unknown WPA param: %d\n",
printk(KERN_ERR DRV_NAME ": %s: Unknown WPA param: %d\n",
dev->name, name);
ret = -EOPNOTSUPP;
}
......@@ -5903,7 +5903,7 @@ static int ipw2100_wpa_mlme(struct net_device *dev, int command, int reason){
break;
default:
IPW_DEBUG_ERROR("%s: Unknown MLME request: %d\n",
printk(KERN_ERR DRV_NAME ": %s: Unknown MLME request: %d\n",
dev->name, command);
ret = -EOPNOTSUPP;
}
......@@ -6153,7 +6153,7 @@ static int ipw2100_wpa_supplicant(struct net_device *dev, struct iw_point *p){
break;
default:
IPW_DEBUG_ERROR("%s: Unknown WPA supplicant request: %d\n",
printk(KERN_ERR DRV_NAME ": %s: Unknown WPA supplicant request: %d\n",
dev->name, param->cmd);
ret = -EOPNOTSUPP;
......@@ -8375,7 +8375,7 @@ static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
(struct ipw2100_fw_header *)fw->fw_entry->data;
if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
IPW_DEBUG_WARNING("Firmware image not compatible "
printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
"(detected version id of %u). "
"See Documentation/networking/README.ipw2100\n",
h->version);
......@@ -8418,7 +8418,7 @@ int ipw2100_get_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
if (rc < 0) {
IPW_DEBUG_ERROR(
printk(KERN_ERR DRV_NAME ": "
"%s: Firmware '%s' not available or load failed.\n",
priv->net_dev->name, fw_name);
return rc;
......@@ -8500,7 +8500,7 @@ int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
firmware_data_left -= 2;
if (len > 32) {
IPW_DEBUG_ERROR(
printk(KERN_ERR DRV_NAME ": "
"Invalid firmware run-length of %d bytes\n",
len);
return -EINVAL;
......@@ -8610,7 +8610,7 @@ int ipw2100_ucode_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
}
if (i == 10) {
IPW_DEBUG_ERROR("%s: Error initializing Symbol\n",
printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
dev->name);
return -EIO;
}
......@@ -8631,7 +8631,7 @@ int ipw2100_ucode_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
}
if (i == 30) {
IPW_DEBUG_ERROR("%s: No response from Symbol - hw not alive\n",
printk(KERN_ERR DRV_NAME ": %s: No response from Symbol - hw not alive\n",
dev->name);
printk_buf(IPW_DL_ERROR, (u8*)&response, sizeof(response));
return -EIO;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册