- 07 7月, 2018 10 次提交
-
-
由 Peng Li 提交于
Only the core/global/IMP reset need clear cause, other type does not need do it. The warning may be treated as error as it is normal. This patch removes the warning. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
The hclgevf_free_vector function expects the caller to pass the vector_id to it, and hclgevf_put_vector pass vector to it now, which will cause vector allocation problem. This patch fixes it by converting vector into vector_id before calling hclgevf_free_vector. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
The napi_alloc_skb is excepted to be called under the non-preemptible code path when it is called by hns3_clean_rx_ring during loopback selftest, otherwise the below warning will be logged: [ 92.420780] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/1873 <SNIP> [ 92.463202] check_preemption_disabled+0xf8/0x100 [ 92.467893] debug_smp_processor_id+0x1c/0x28 [ 92.472239] __napi_alloc_skb+0x30/0x130 [ 92.476158] hns3_clean_rx_ring+0x118/0x5f0 [hns3] [ 92.480941] hns3_self_test+0x32c/0x4d0 [hns3] [ 92.485375] ethtool_self_test+0xdc/0x1e8 [ 92.489372] dev_ethtool+0x1020/0x1da8 [ 92.493109] dev_ioctl+0x188/0x3a0 [ 92.496499] sock_do_ioctl+0xf4/0x208 [ 92.500148] sock_ioctl+0x228/0x3e8 [ 92.503626] do_vfs_ioctl+0xc4/0x880 [ 92.507189] SyS_ioctl+0x94/0xa8 [ 92.510404] el0_svc_naked+0x30/0x34 This patch fix it by disabling preemption when calling hns3_clean_rx_ring during loopback selftest. Fixes: c39c4d98 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
When change the mtu, the minimal frame size of mac will be set to zero, it is incorrect. This patch fixes it by set it to the default value. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fuyun Liang 提交于
The payload of mailbox message is 16 byte and the value of HCLGE_MBX_MAX_ARQ_MSG_SIZE is 8. A message truncated problem will happen when mailbox message is converted to ARQ message. This patch replaces HCLGE_MBX_MAX_ARQ_MSG_SIZE with the size of ARQ message in hclgevf_mbx_handler to fix this problem. Fixes: b11a0bb2 ("net: hns3: Add mailbox support to VF driver") Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
Hardware only support tcp/udp/sctp l4 checksum offload, but the driver currently tell hardware to do l4 checksum offlad when l3 is IPv4 or IPv6, which may cause checksumm error. This patch fixes it by only enabling the l4 offload when l4 is tcp/udp/sctp. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
The HCLGE_RX_PRIV_EN_B is used to tell the firmware whether to update the specific waterline value, if the is not set, the firmware will ignore the value. This patch fixes by setting the HCLGE_RX_PRIV_EN_B even if the updated value is zero. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
When pfc pause mode is enable, the mac pause mode need to be disabled, otherwise the pfc pause packet will not be sent when congestion happens. This patch fixes by disabling the mac pause when pfc pause is enabled. Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
Currently, tc related configuration is not setup when the netdev is first up, which cause the stack only using tc 0 problem. This patch fixes it by setting the tc related configuration using the info from NCL_CONFIG when netdev is first up. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rick Farrington 提交于
Pre-1.7.2 NIC firmware does not support (and does not respond to) the "get speed" command which is sent by the 1.7.2 driver (for CN23XX-225 cards only) during modprobe. Due to a bug in older firmware (with respect to unknown commands), this unsupported command causes a cascade of errors that ends in a kernel panic. Fix it by making the sending of the "get speed" command conditional on the firmware version. Signed-off-by: NRick Farrington <ricardo.farrington@cavium.com> Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2018 18 次提交
-
-
由 Ganesh Goudar 提交于
Use 'chip_ver' rather than 'chip' to check if the card is T5. Fixes: e8d45292 ("cxgb4: clean up init_one") Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variables adv and lpa are being assigned but are never used hence they are redundant and can be removed. Also remove the unncessary mii_reads too. Cleans up clang warnings: warning: variable 'lpa' set but not used [-Wunused-but-set-variable] warning: variable 'adv' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
Both SFC and SFC_FALCON depend on NET_VENDOR_SOLARFLARE, hence use the latter to decide whether to descend into the sfc subdirectory. Move the rule to descend into sfc/falcon to the sfc subdirectory. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NMartin Habets <mhabets@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
The vendor guard Kconfig symbols for Cadence and Packet Engines use a "NET_" prefix, while all other vendor guards use a "NET_VENDOR_" prefix. Hence make them consistent with the rest, and add the missing trailing "S" for Packet Engines while at it. As these options don't directly affect the kernel build, and default to "y", this change has no impact on kernels built with existing (def)configs. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
Enabling NET_VENDOR_* Kconfig options does not directly affect the kernel build. Hence NET_VENDOR_AURORA should default to yes, like other NET_VENDOR_* options. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variables consumer, cmd_desc, end_cnt and no_of_desc are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'consumer' set but not used [-Wunused-but-set-variable] warning: variable 'cmd_desc' set but not used [-Wunused-but-set-variable] warning: variable 'end_cnt' set but not used [-Wunused-but-set-variable] warning: variable 'no_of_desc' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Create initial devlink parameters table for bnxt_en. Table consists of a permanent generic parameter. enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Moshe Shemesh 提交于
Add mlx4_devlink_reload() to support devlink reload operation. Add mlx4_devlink_param_load_driverinit_values() to load values which were set using driverinit configuration mode. Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Moshe Shemesh 提交于
Create initial parameters table for mlx4. The table consists of two generic parameters and two driver-specific parameters. Generic: internal_err_reset - Enable reset device on internal errors. This parameter can be configured on mlx4 either on runtime or during driver initialization. max_macs - Max number of MACs per ETH port. For mlx4 this parameter value range is between 1 and 128. This parameter can be configured on mlx4 only during driver initialization. Driver specific: enable_64b_cqe_eqe - Enable 64 byte CQEs/EQEs when the FW supports it. This parameter can be configured on mlx4 only during driver initialization. enable_4k_uar - Enable using 4K UAR. This parameter can be configured on mlx4 only during driver initialization. Register the parameters table on mlx4_init_one() and unregister on mlx4_remove_one(). Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variable channel is being assigned but is never used hence it is redundant and can be removed. Cleans up two clang warnings: warning: variable 'channel' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variables my_epid and max_epid are currently assigned and not being used - however, I suspect they were intended to be used in the for-loops to reduce the dereferencing of hw. Replace hw->my_epid and hw->max_epid with these variables. Cleans up clang warnings: warning: variable 'my_epid' set but not used [-Wunused-but-set-variable] variable 'max_epid' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Pointer skb is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'skb' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Pointer ndev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'ndev' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fixes the following sparse warnings: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:525:5: warning: symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:536:5: warning: symbol 'hw_atl_utils_mpi_set_state' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fixes the following sparse warnings: drivers/net/dsa/vitesse-vsc73xx.c:1054:6: warning: symbol 'vsc73xx_get_strings' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1113:5: warning: symbol 'vsc73xx_get_sset_count' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1122:6: warning: symbol 'vsc73xx_get_ethtool_stats' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in dev_err error message. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
When runtime-suspending we configure WoL w/o touching saved_wolopts. If saved_wolopts == 0 we would power down the PHY in this case what's wrong. Therefore we have to check the actual chip WoL settings here. Fixes: 433f9d0d ("r8169: improve saved_wolopts handling") Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
In highly constrained resources environments (like the 124VF T5 and 248VF T6 configurations), PF4 may not have very many resources at all and we need to adapt to whatever we've been allocated, this patch adds support to get the provisioned resources. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2018 12 次提交
-
-
由 Colin Ian King 提交于
Variable 'irq' is being assigned but is never used hence it is and can be removed. Cleans up clang warning: warning: variable 'irq' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variable old_vlan is being assigned but is never used hence it is and can be removed. Cleans up clang warning: warning: variable 'old_vlan' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Pointer 'name' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'name' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Pointer 'info' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'info' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Pointer pfhwdev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'pfhwdev' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variable 'protocol' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'protocol' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variable last_rule_idx is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'last_rule_idx' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variable 'inc' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'inc' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NFugang Duan <fugang.duan@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Pointer req and variable func are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'req' set but not used [-Wunused-but-set-variable] warning: variable 'func' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variable 'freed' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'freed' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Pointer rxd is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'rxb' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Variable old_duplex is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'old_duplex' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-