提交 a75a8efa 编写于 作者: Y Yunsheng Lin 提交者: David S. Miller

net: hns3: Fix tc setup when netdev is first up

Currently, tc related configuration is not setup when the
netdev is first up, which cause the stack only using tc 0
problem.

This patch fixes it by setting the tc related configuration
using the info from NCL_CONFIG when netdev is first up.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 4fed38cf
......@@ -239,7 +239,28 @@ static int hns3_nic_set_real_num_queue(struct net_device *netdev)
struct hnae3_handle *h = hns3_get_handle(netdev);
struct hnae3_knic_private_info *kinfo = &h->kinfo;
unsigned int queue_size = kinfo->rss_size * kinfo->num_tc;
int ret;
int i, ret;
if (kinfo->num_tc <= 1) {
netdev_reset_tc(netdev);
} else {
ret = netdev_set_num_tc(netdev, kinfo->num_tc);
if (ret) {
netdev_err(netdev,
"netdev_set_num_tc fail, ret=%d!\n", ret);
return ret;
}
for (i = 0; i < HNAE3_MAX_TC; i++) {
if (!kinfo->tc_info[i].enable)
continue;
netdev_set_tc_queue(netdev,
kinfo->tc_info[i].tc,
kinfo->tc_info[i].tqp_count,
kinfo->tc_info[i].tqp_offset);
}
}
ret = netif_set_real_num_tx_queues(netdev, queue_size);
if (ret) {
......@@ -312,7 +333,9 @@ static int hns3_nic_net_up(struct net_device *netdev)
static int hns3_nic_net_open(struct net_device *netdev)
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
int ret;
struct hnae3_handle *h = hns3_get_handle(netdev);
struct hnae3_knic_private_info *kinfo;
int i, ret;
netif_carrier_off(netdev);
......@@ -327,6 +350,12 @@ static int hns3_nic_net_open(struct net_device *netdev)
return ret;
}
kinfo = &h->kinfo;
for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) {
netdev_set_prio_tc_map(netdev, i,
kinfo->prio_tc[i]);
}
priv->ae_handle->last_reset_time = jiffies;
return 0;
}
......@@ -1307,7 +1336,6 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
u16 mode = mqprio_qopt->mode;
u8 hw = mqprio_qopt->qopt.hw;
bool if_running;
unsigned int i;
int ret;
if (!((hw == TC_MQPRIO_HW_OFFLOAD_TCS &&
......@@ -1331,24 +1359,6 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
if (ret)
goto out;
if (tc <= 1) {
netdev_reset_tc(netdev);
} else {
ret = netdev_set_num_tc(netdev, tc);
if (ret)
goto out;
for (i = 0; i < HNAE3_MAX_TC; i++) {
if (!kinfo->tc_info[i].enable)
continue;
netdev_set_tc_queue(netdev,
kinfo->tc_info[i].tc,
kinfo->tc_info[i].tqp_count,
kinfo->tc_info[i].tqp_offset);
}
}
ret = hns3_nic_set_real_num_queue(netdev);
out:
......@@ -3202,7 +3212,6 @@ static int hns3_client_setup_tc(struct hnae3_handle *handle, u8 tc)
struct net_device *ndev = kinfo->netdev;
bool if_running;
int ret;
u8 i;
if (tc > HNAE3_MAX_TC)
return -EINVAL;
......@@ -3212,10 +3221,6 @@ static int hns3_client_setup_tc(struct hnae3_handle *handle, u8 tc)
if_running = netif_running(ndev);
ret = netdev_set_num_tc(ndev, tc);
if (ret)
return ret;
if (if_running) {
(void)hns3_nic_net_stop(ndev);
msleep(100);
......@@ -3226,27 +3231,6 @@ static int hns3_client_setup_tc(struct hnae3_handle *handle, u8 tc)
if (ret)
goto err_out;
if (tc <= 1) {
netdev_reset_tc(ndev);
goto out;
}
for (i = 0; i < HNAE3_MAX_TC; i++) {
struct hnae3_tc_info *tc_info = &kinfo->tc_info[i];
if (tc_info->enable)
netdev_set_tc_queue(ndev,
tc_info->tc,
tc_info->tqp_count,
tc_info->tqp_offset);
}
for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) {
netdev_set_prio_tc_map(ndev, i,
kinfo->prio_tc[i]);
}
out:
ret = hns3_nic_set_real_num_queue(ndev);
err_out:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册