Split a reusable function ip6gre_tnl_copy_tnl_parm() from
ip6gre_tnl_change(). This will allow ERSPAN-specific code to
reuse the common parts while customizing the behavior for ERSPAN.

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function ip6gre_tnl_link_config() is used for setting up
configuration of both ip6gretap and ip6erspan tunnels. Split the
function into the common part and the route-lookup part. The latter then
takes the calculated header length as an argument. This split will allow
the patches down the line to sneak in a custom header length computation
for the ERSPAN tunnel.

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev->needed_headroom is not primed until ip6_tnl_xmit(), so it starts
out zero. Thus the call to skb_cow_head() fails to actually make sure
there's enough headroom to push the ERSPAN headers to. That can lead to
the panic cited below. (Reproducer below that).

Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.

[  190.703567] kernel BUG at net/core/skbuff.c:104!
[  190.708384] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  190.714007] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[  190.728975] CPU: 1 PID: 959 Comm: kworker/1:2 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[  190.737647] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[  190.747006] Workqueue: ipv6_addrconf addrconf_dad_work
[  190.752222] RIP: 0010:skb_panic+0xc3/0x100
[  190.756358] RSP: 0018:ffff8801d54072f0 EFLAGS: 00010282
[  190.761629] RAX: 0000000000000085 RBX: ffff8801c1a8ecc0 RCX: 0000000000000000
[  190.768830] RDX: 0000000000000085 RSI: dffffc0000000000 RDI: ffffed003aa80e54
[  190.776025] RBP: ffff8801bd1ec5a0 R08: ffffed003aabce19 R09: ffffed003aabce19
[  190.783226] R10: 0000000000000001 R11: ffffed003aabce18 R12: ffff8801bf695dbe
[  190.790418] R13: 0000000000000084 R14: 00000000000006c0 R15: ffff8801bf695dc8
[  190.797621] FS:  0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[  190.805786] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  190.811582] CR2: 000055fa929aced0 CR3: 0000000003228004 CR4: 00000000001606e0
[  190.818790] Call Trace:
[  190.821264]  <IRQ>
[  190.823314]  ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.828940]  ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.834562]  skb_push+0x78/0x90
[  190.837749]  ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[  190.843219]  ? ip6gre_tunnel_ioctl+0xd90/0xd90 [ip6_gre]
[  190.848577]  ? debug_check_no_locks_freed+0x210/0x210
[  190.853679]  ? debug_check_no_locks_freed+0x210/0x210
[  190.858783]  ? print_irqtrace_events+0x120/0x120
[  190.863451]  ? sched_clock_cpu+0x18/0x210
[  190.867496]  ? cyc2ns_read_end+0x10/0x10
[  190.871474]  ? skb_network_protocol+0x76/0x200
[  190.875977]  dev_hard_start_xmit+0x137/0x770
[  190.880317]  ? do_raw_spin_trylock+0x6d/0xa0
[  190.884624]  sch_direct_xmit+0x2ef/0x5d0
[  190.888589]  ? pfifo_fast_dequeue+0x3fa/0x670
[  190.892994]  ? pfifo_fast_change_tx_queue_len+0x810/0x810
[  190.898455]  ? __lock_is_held+0xa0/0x160
[  190.902422]  __qdisc_run+0x39e/0xfc0
[  190.906041]  ? _raw_spin_unlock+0x29/0x40
[  190.910090]  ? pfifo_fast_enqueue+0x24b/0x3e0
[  190.914501]  ? sch_direct_xmit+0x5d0/0x5d0
[  190.918658]  ? pfifo_fast_dequeue+0x670/0x670
[  190.923047]  ? __dev_queue_xmit+0x172/0x1770
[  190.927365]  ? preempt_count_sub+0xf/0xd0
[  190.931421]  __dev_queue_xmit+0x410/0x1770
[  190.935553]  ? ___slab_alloc+0x605/0x930
[  190.939524]  ? print_irqtrace_events+0x120/0x120
[  190.944186]  ? memcpy+0x34/0x50
[  190.947364]  ? netdev_pick_tx+0x1c0/0x1c0
[  190.951428]  ? __skb_clone+0x2fd/0x3d0
[  190.955218]  ? __copy_skb_header+0x270/0x270
[  190.959537]  ? rcu_read_lock_sched_held+0x93/0xa0
[  190.964282]  ? kmem_cache_alloc+0x344/0x4d0
[  190.968520]  ? cyc2ns_read_end+0x10/0x10
[  190.972495]  ? skb_clone+0x123/0x230
[  190.976112]  ? skb_split+0x820/0x820
[  190.979747]  ? tcf_mirred+0x554/0x930 [act_mirred]
[  190.984582]  tcf_mirred+0x554/0x930 [act_mirred]
[  190.989252]  ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[  190.996109]  ? __lock_acquire+0x706/0x26e0
[  191.000239]  ? sched_clock_cpu+0x18/0x210
[  191.004294]  tcf_action_exec+0xcf/0x2a0
[  191.008179]  tcf_classify+0xfa/0x340
[  191.011794]  __netif_receive_skb_core+0x8e1/0x1c60
[  191.016630]  ? debug_check_no_locks_freed+0x210/0x210
[  191.021732]  ? nf_ingress+0x500/0x500
[  191.025458]  ? process_backlog+0x347/0x4b0
[  191.029619]  ? print_irqtrace_events+0x120/0x120
[  191.034302]  ? lock_acquire+0xd8/0x320
[  191.038089]  ? process_backlog+0x1b6/0x4b0
[  191.042246]  ? process_backlog+0xc2/0x4b0
[  191.046303]  process_backlog+0xc2/0x4b0
[  191.050189]  net_rx_action+0x5cc/0x980
[  191.053991]  ? napi_complete_done+0x2c0/0x2c0
[  191.058386]  ? mark_lock+0x13d/0xb40
[  191.062001]  ? clockevents_program_event+0x6b/0x1d0
[  191.066922]  ? print_irqtrace_events+0x120/0x120
[  191.071593]  ? __lock_is_held+0xa0/0x160
[  191.075566]  __do_softirq+0x1d4/0x9d2
[  191.079282]  ? ip6_finish_output2+0x524/0x1460
[  191.083771]  do_softirq_own_stack+0x2a/0x40
[  191.087994]  </IRQ>
[  191.090130]  do_softirq.part.13+0x38/0x40
[  191.094178]  __local_bh_enable_ip+0x135/0x190
[  191.098591]  ip6_finish_output2+0x54d/0x1460
[  191.102916]  ? ip6_forward_finish+0x2f0/0x2f0
[  191.107314]  ? ip6_mtu+0x3c/0x2c0
[  191.110674]  ? ip6_finish_output+0x2f8/0x650
[  191.114992]  ? ip6_output+0x12a/0x500
[  191.118696]  ip6_output+0x12a/0x500
[  191.122223]  ? ip6_route_dev_notify+0x5b0/0x5b0
[  191.126807]  ? ip6_finish_output+0x650/0x650
[  191.131120]  ? ip6_fragment+0x1a60/0x1a60
[  191.135182]  ? icmp6_dst_alloc+0x26e/0x470
[  191.139317]  mld_sendpack+0x672/0x830
[  191.143021]  ? igmp6_mcf_seq_next+0x2f0/0x2f0
[  191.147429]  ? __local_bh_enable_ip+0x77/0x190
[  191.151913]  ipv6_mc_dad_complete+0x47/0x90
[  191.156144]  addrconf_dad_completed+0x561/0x720
[  191.160731]  ? addrconf_rs_timer+0x3a0/0x3a0
[  191.165036]  ? mark_held_locks+0xc9/0x140
[  191.169095]  ? __local_bh_enable_ip+0x77/0x190
[  191.173570]  ? addrconf_dad_work+0x50d/0xa20
[  191.177886]  ? addrconf_dad_work+0x529/0xa20
[  191.182194]  addrconf_dad_work+0x529/0xa20
[  191.186342]  ? addrconf_dad_completed+0x720/0x720
[  191.191088]  ? __lock_is_held+0xa0/0x160
[  191.195059]  ? process_one_work+0x45d/0xe20
[  191.199302]  ? process_one_work+0x51e/0xe20
[  191.203531]  ? rcu_read_lock_sched_held+0x93/0xa0
[  191.208279]  process_one_work+0x51e/0xe20
[  191.212340]  ? pwq_dec_nr_in_flight+0x200/0x200
[  191.216912]  ? get_lock_stats+0x4b/0xf0
[  191.220788]  ? preempt_count_sub+0xf/0xd0
[  191.224844]  ? worker_thread+0x219/0x860
[  191.228823]  ? do_raw_spin_trylock+0x6d/0xa0
[  191.233142]  worker_thread+0xeb/0x860
[  191.236848]  ? process_one_work+0xe20/0xe20
[  191.241095]  kthread+0x206/0x300
[  191.244352]  ? process_one_work+0xe20/0xe20
[  191.248587]  ? kthread_stop+0x570/0x570
[  191.252459]  ret_from_fork+0x3a/0x50
[  191.256082] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[  191.275327] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d54072f0
[  191.281024] ---[ end trace 7ea51094e099e006 ]---
[  191.285724] Kernel panic - not syncing: Fatal exception in interrupt
[  191.292168] Kernel Offset: disabled
[  191.295697] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reproducer:

	ip link add h1 type veth peer name swp1
	ip link add h3 type veth peer name swp3

	ip link set dev h1 up
	ip address add 192.0.2.1/28 dev h1

	ip link add dev vh3 type vrf table 20
	ip link set dev h3 master vh3
	ip link set dev vh3 up
	ip link set dev h3 up

	ip link set dev swp3 up
	ip address add dev swp3 2001:db8:2::1/64

	ip link set dev swp1 up
	tc qdisc add dev swp1 clsact

	ip link add name gt6 type ip6erspan \
		local 2001:db8:2::1 remote 2001:db8:2::2 oseq okey 123
	ip link set dev gt6 up

	sleep 1

	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
		action mirred egress mirror dev gt6
	ping -I h1 192.0.2.2

Fixes: e41c7c68 ("ip6erspan: make sure enough headroom at xmit.")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__gre6_xmit() pushes GRE headers before handing over to ip6_tnl_xmit()
for generic IP-in-IP processing. However it doesn't make sure that there
is enough headroom to push the header to. That can lead to the panic
cited below. (Reproducer below that).

Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.

[  158.576725] kernel BUG at net/core/skbuff.c:104!
[  158.581510] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[  158.587174] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[  158.602268] CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[  158.610938] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[  158.620426] RIP: 0010:skb_panic+0xc3/0x100
[  158.624586] RSP: 0018:ffff8801d3f27110 EFLAGS: 00010286
[  158.629882] RAX: 0000000000000082 RBX: ffff8801c02cc040 RCX: 0000000000000000
[  158.637127] RDX: 0000000000000082 RSI: dffffc0000000000 RDI: ffffed003a7e4e18
[  158.644366] RBP: ffff8801bfec8020 R08: ffffed003aabce19 R09: ffffed003aabce19
[  158.651574] R10: 000000000000000b R11: ffffed003aabce18 R12: ffff8801c364de66
[  158.658786] R13: 000000000000002c R14: 00000000000000c0 R15: ffff8801c364de68
[  158.666007] FS:  0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[  158.674212] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.680036] CR2: 00007f4b3702dcd0 CR3: 0000000003228002 CR4: 00000000001606e0
[  158.687228] Call Trace:
[  158.689752]  ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.694475]  ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.699141]  skb_push+0x78/0x90
[  158.702344]  __gre6_xmit+0x246/0xd80 [ip6_gre]
[  158.706872]  ip6gre_tunnel_xmit+0x3bc/0x610 [ip6_gre]
[  158.711992]  ? __gre6_xmit+0xd80/0xd80 [ip6_gre]
[  158.716668]  ? debug_check_no_locks_freed+0x210/0x210
[  158.721761]  ? print_irqtrace_events+0x120/0x120
[  158.726461]  ? sched_clock_cpu+0x18/0x210
[  158.730572]  ? sched_clock_cpu+0x18/0x210
[  158.734692]  ? cyc2ns_read_end+0x10/0x10
[  158.738705]  ? skb_network_protocol+0x76/0x200
[  158.743216]  ? netif_skb_features+0x1b2/0x550
[  158.747648]  dev_hard_start_xmit+0x137/0x770
[  158.752010]  sch_direct_xmit+0x2ef/0x5d0
[  158.755992]  ? pfifo_fast_dequeue+0x3fa/0x670
[  158.760460]  ? pfifo_fast_change_tx_queue_len+0x810/0x810
[  158.765975]  ? __lock_is_held+0xa0/0x160
[  158.770002]  __qdisc_run+0x39e/0xfc0
[  158.773673]  ? _raw_spin_unlock+0x29/0x40
[  158.777781]  ? pfifo_fast_enqueue+0x24b/0x3e0
[  158.782191]  ? sch_direct_xmit+0x5d0/0x5d0
[  158.786372]  ? pfifo_fast_dequeue+0x670/0x670
[  158.790818]  ? __dev_queue_xmit+0x172/0x1770
[  158.795195]  ? preempt_count_sub+0xf/0xd0
[  158.799313]  __dev_queue_xmit+0x410/0x1770
[  158.803512]  ? ___slab_alloc+0x605/0x930
[  158.807525]  ? ___slab_alloc+0x605/0x930
[  158.811540]  ? memcpy+0x34/0x50
[  158.814768]  ? netdev_pick_tx+0x1c0/0x1c0
[  158.818895]  ? __skb_clone+0x2fd/0x3d0
[  158.822712]  ? __copy_skb_header+0x270/0x270
[  158.827079]  ? rcu_read_lock_sched_held+0x93/0xa0
[  158.831903]  ? kmem_cache_alloc+0x344/0x4d0
[  158.836199]  ? skb_clone+0x123/0x230
[  158.839869]  ? skb_split+0x820/0x820
[  158.843521]  ? tcf_mirred+0x554/0x930 [act_mirred]
[  158.848407]  tcf_mirred+0x554/0x930 [act_mirred]
[  158.853104]  ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[  158.860005]  ? __lock_acquire+0x706/0x26e0
[  158.864162]  ? mark_lock+0x13d/0xb40
[  158.867832]  tcf_action_exec+0xcf/0x2a0
[  158.871736]  tcf_classify+0xfa/0x340
[  158.875402]  __netif_receive_skb_core+0x8e1/0x1c60
[  158.880334]  ? nf_ingress+0x500/0x500
[  158.884059]  ? process_backlog+0x347/0x4b0
[  158.888241]  ? lock_acquire+0xd8/0x320
[  158.892050]  ? process_backlog+0x1b6/0x4b0
[  158.896228]  ? process_backlog+0xc2/0x4b0
[  158.900291]  process_backlog+0xc2/0x4b0
[  158.904210]  net_rx_action+0x5cc/0x980
[  158.908047]  ? napi_complete_done+0x2c0/0x2c0
[  158.912525]  ? rcu_read_unlock+0x80/0x80
[  158.916534]  ? __lock_is_held+0x34/0x160
[  158.920541]  __do_softirq+0x1d4/0x9d2
[  158.924308]  ? trace_event_raw_event_irq_handler_exit+0x140/0x140
[  158.930515]  run_ksoftirqd+0x1d/0x40
[  158.934152]  smpboot_thread_fn+0x32b/0x690
[  158.938299]  ? sort_range+0x20/0x20
[  158.941842]  ? preempt_count_sub+0xf/0xd0
[  158.945940]  ? schedule+0x5b/0x140
[  158.949412]  kthread+0x206/0x300
[  158.952689]  ? sort_range+0x20/0x20
[  158.956249]  ? kthread_stop+0x570/0x570
[  158.960164]  ret_from_fork+0x3a/0x50
[  158.963823] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[  158.983235] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d3f27110
[  158.988935] ---[ end trace 5af56ee845aa6cc8 ]---
[  158.993641] Kernel panic - not syncing: Fatal exception in interrupt
[  159.000176] Kernel Offset: disabled
[  159.003767] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Reproducer:

	ip link add h1 type veth peer name swp1
	ip link add h3 type veth peer name swp3

	ip link set dev h1 up
	ip address add 192.0.2.1/28 dev h1

	ip link add dev vh3 type vrf table 20
	ip link set dev h3 master vh3
	ip link set dev vh3 up
	ip link set dev h3 up

	ip link set dev swp3 up
	ip address add dev swp3 2001:db8:2::1/64

	ip link set dev swp1 up
	tc qdisc add dev swp1 clsact

	ip link add name gt6 type ip6gretap \
		local 2001:db8:2::1 remote 2001:db8:2::2
	ip link set dev gt6 up

	sleep 1

	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
		action mirred egress mirror dev gt6
	ping -I h1 192.0.2.2

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ERSPAN only support version 1 and 2.  When packets send to an
erspan device which does not have proper version number set,
drop the packet.  In real case, we observe multicast packets
sent to the erspan pernet device, erspan0, which does not have
erspan version configured.
Reported-by: NGreg Rose <gvrose8192@gmail.com>
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thomas Falcon says:

====================
ibmvnic: Fix bugs and memory leaks

This is a small patch series fixing up some bugs and memory leaks
in the ibmvnic driver. The first fix frees up previously allocated
memory that should be freed in case of an error. The second fixes
a reset case that was failing due to TX/RX queue IRQ's being
erroneously disabled without being enabled again. The final patch
fixes incorrect reallocated of statistics buffers during a device
reset, resulting in loss of statistics information and a memory leak.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move initialization of statistics buffers from ibmvnic_init function
into ibmvnic_probe. In the current state, ibmvnic_init will be called
again during a device reset, resulting in the allocation of new
buffers without freeing the old ones.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is not necessary to disable interrupt lines here during a reset
to handle a non-fatal firmware error. Move that call within the code
block that handles the other cases that do require interrupts to be
disabled and re-enabled.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the firmware map fails for whatever reason, remember to free
up the memory after.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Updating the FIB tracepoint for the recent change to allow rules using
the protocol and ports exposed a few places where the entries in the flow
struct are not initialized.

For __fib_validate_source add the call to fib4_rules_early_flow_dissect
since it is invoked for the input path. For netfilter, add the memset on
the flow struct to avoid future problems like this. In ip_route_input_slow
need to set the fields if the skb dissection does not happen.

Fixes: bfff4862 ("net: fib_rules: support for match on ip_proto, sport and dport")
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

scatterlist code expects virt_to_page() to work, which fails with
CONFIG_VMAP_STACK=y.

Fixes: c46234eb ("tls: RX path for ktls")
Signed-off-by: NMatt Mullins <mmullins@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit b196d88a ("tun: fix use after free for ptr_ring") we
need clean up tx ring during release(). But unfortunately, it tries to
do the cleanup blindly after socket were destroyed which will lead
another use-after-free. Fix this by doing the cleanup before dropping
the last reference of the socket in __tun_detach().
Reported-by: NAndrei Vagin <avagin@virtuozzo.com>
Acked-by: NAndrei Vagin <avagin@virtuozzo.com>
Fixes: b196d88a ("tun: fix use after free for ptr_ring")
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michal Kalderon says:

====================
qed: LL2 fixes

This series fixes some issues in ll2 related to synchronization
and resource freeing
====================
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stress on qedi/qedr load unload lead to list_del corruption.
This is due to ll2 connection terminate freeing resources without
verifying that no more ll2 processing will occur.

This patch unregisters the ll2 status block before terminating
the connection to assure this race does not occur.

Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling")
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ll2 flows of flushing the txq/rxq need to be synchronized with the
regular fp processing. Caused list corruption during load/unload stress
tests.

Fixes: 0a7fb11c ("qed: Add Light L2 support")
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver should free all pending isles once it gets a FLUSH cqe from FW.
Part of iSCSI out of order flow.

Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling")
Signed-off-by: NAriel Elior <Ariel.Elior@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly to what was done with commit a52956df ("net sched actions:
fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid
refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given.

Fixes: 5026c9b1 ("net sched: vlan action fix late binding")
CC: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The configuration settings for RBTX4927 were accidentally removed,
leading to a silently broken network interface.

Re-add the missing settings to fix this.

Fixes: 8eb97ff5 ("net: 8390: remove m32r specific bits")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: bcm_sf2: CFP fixes

This patch series fixes a number of usability issues with the SF2 Compact Field
Processor code:

- we would not be properly bound checking the location when we let the kernel
  automatically place rules with RX_CLS_LOC_ANY

- when using IPv6 rules and user space specifies a location identifier we
  would be off by one in what the chain ID (within the Broadcom tag) indicates

- it would be possible to delete one of the two slices of an IPv6 while leaving
  the other one programming leading to various problems
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was possible to delete only one half of an IPv6, which would leave
the second half still programmed and possibly in use. Instead of
checking for the unused bitmap, we need to check the unique bitmap, and
refuse any deletion that does not match that criteria. We also need to
move that check from bcm_sf2_cfp_rule_del_one() into its caller:
bcm_sf2_cfp_rule_del() otherwise we would not be able to delete second
halves anymore that would not pass the first test.

Fixes: ba0696c2 ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We had several issues that would make the programming of IPv6 rules both
inconsistent and error prone:

- the chain ID that we would be asking the hardware to put in the
  packet's Broadcom tag would be off by one, it would return one of the
  two indexes, but not the one user-space specified

- when an user specified a particular location to insert a CFP rule at,
  we would not be returning the same index, which would be confusing if
  nothing else

- finally, like IPv4, it would be possible to overflow the last entry by
  re-programming it

Fix this by swapping the usage of rule_index[0] and rule_index[1] where
relevant in order to return a consistent and correct user-space
experience.

Fixes: ba0696c2 ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we let the kernel pick up a rule location with RX_CLS_LOC_ANY, we
would be able to overwrite the last rules because of a number of issues.

The IPv4 code path would not be checking that rule_index is within
bounds, and it would also only be allowed to pick up rules from range
0..126 instead of the full 0..127 range. This would lead us to allow
overwriting the last rule when we let the kernel pick-up the location.

Fixes: 33061458 ("net: dsa: bcm_sf2: Move IPv4 CFP processing to specific functions")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be
used as reference clock for the MAC unit. The clock signal must meet the
RGMII requirements to ensure the correct data transmission between the
MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle
requirement if the phy is configured as slave. For a complete
describtion look at the errata sheets: DS80000691D or DS80000692D.

The errata sheet recommends to force the phy into master mode whenever
there is a 1000Base-T link-up as work around. Only set the
"micrel,force-master" property if you use the phy reference clock provided
by CLK125_NDO pin as MAC reference clock in your application.

Attenation, this workaround is only usable if the link partner can
be configured to slave mode for 1000Base-T.
Signed-off-by: NMarkus Niebel <Markus.Niebel@tqs.de>
[m.felsch@pengutronix.de: fix dt-binding documentation]
[m.felsch@pengutronix.de: use already existing result var for read/write]
[m.felsch@pengutronix.de: add error handling]
[m.felsch@pengutronix.de: add more comments]
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzkaller found a reliable way to crash the host, hitting a BUG()
in __tcp_retransmit_skb()

Malicous MSG_FASTOPEN is the root cause. We need to purge write queue
in tcp_connect_init() at the point we init snd_una/write_seq.

This patch also replaces the BUG() by a less intrusive WARN_ON_ONCE()

kernel BUG at net/ipv4/tcp_output.c:2837!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 5276 Comm: syz-executor0 Not tainted 4.17.0-rc3+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__tcp_retransmit_skb+0x2992/0x2eb0 net/ipv4/tcp_output.c:2837
RSP: 0000:ffff8801dae06ff8 EFLAGS: 00010206
RAX: ffff8801b9fe61c0 RBX: 00000000ffc18a16 RCX: ffffffff864e1a49
RDX: 0000000000000100 RSI: ffffffff864e2e12 RDI: 0000000000000005
RBP: ffff8801dae073a0 R08: ffff8801b9fe61c0 R09: ffffed0039c40dd2
R10: ffffed0039c40dd2 R11: ffff8801ce206e93 R12: 00000000421eeaad
R13: ffff8801ce206d4e R14: ffff8801ce206cc0 R15: ffff8801cd4f4a80
FS:  0000000000000000(0000) GS:ffff8801dae00000(0063) knlGS:00000000096bc900
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000020000000 CR3: 00000001c47b6000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tcp_retransmit_skb+0x2e/0x250 net/ipv4/tcp_output.c:2923
 tcp_retransmit_timer+0xc50/0x3060 net/ipv4/tcp_timer.c:488
 tcp_write_timer_handler+0x339/0x960 net/ipv4/tcp_timer.c:573
 tcp_write_timer+0x111/0x1d0 net/ipv4/tcp_timer.c:593
 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1d1/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:525 [inline]
 smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863

Fixes: cf60af03 ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid using the kernel's irq_descriptor and return IRQ vector affinity
directly from the driver.

This fixes the following build break when CONFIG_SMP=n

include/linux/mlx5/driver.h: In function ‘mlx5_get_vector_affinity_hint’:
include/linux/mlx5/driver.h:1299:13: error:
        ‘struct irq_desc’ has no member named ‘affinity_hint’

Fixes: 6082d9c9 ("net/mlx5: Fix mlx5_get_vector_affinity function")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Guenter Roeck <linux@roeck-us.net>
CC: Thomas Gleixner <tglx@linutronix.de>
Tested-by: NIsrael Rukshin <israelr@mellanox.com>
Reported-by: Nkbuild test robot <lkp@intel.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When master device's mac has been changed, the commit
32c10bbf ("ipvlan: always use the current L2 addr of the
master") makes the IPVlan devices's mac changed also, but it
doesn't do related works such as flush the IPVlan devices's
arp table.
Signed-off-by: NKeefe Liu <liuqifa@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The gen bits must be read first from (resp. written last to) DMA memory.
The proper way to enforce this on Linux is to call dma_rmb() (resp.
dma_wmb()).
Signed-off-by: NRegis Duchesne <hpreg@vmware.com>
Acked-by: NRonak Doshi <doshir@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DMA mask must be set before, not after, the first DMA map operation, or
the first DMA map operation could in theory fail on some systems.

Fixes: b0eb57cb ("VMXNET3: Add support for virtual IOMMU")
Signed-off-by: NRegis Duchesne <hpreg@vmware.com>
Acked-by: NRonak Doshi <doshir@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Earlier code of doing bitwise AND with field width bits was wrong.
Instead, simplify code to calculate ntuple_mask based on supplied
fields and then compare with mask configured in hw - which is the
correct and simpler way to validate ntuple mask.

Fixes: 3eb8b62d ("cxgb4: add support to create hash-filters via tc-flower offload")
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's possible to crash the kernel in several different ways by sending
messages to the SMC_PNETID generic netlink family that are missing the
expected attributes:

- Missing SMC_PNETID_NAME => null pointer dereference when comparing
  names.
- Missing SMC_PNETID_ETHNAME => null pointer dereference accessing
  smc_pnetentry::ndev.
- Missing SMC_PNETID_IBNAME => null pointer dereference accessing
  smc_pnetentry::smcibdev.
- Missing SMC_PNETID_IBPORT => out of bounds array access to
  smc_ib_device::pattr[-1].

Fix it by validating that all expected attributes are present and that
SMC_PNETID_IBPORT is nonzero.

Reported-by: syzbot+5cd61039dc9b8bfa6e47@syzkaller.appspotmail.com
Fixes: 6812baab ("smc: establish pnet table management")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid exiting the function with a lingering sysfs file (if the first
call to device_create_file() fails while the second succeeds), and avoid
calling devlink_port_unregister() twice.

In other words, either mlx4_init_port_info() succeeds and returns zero, or
it fails, returns non-zero, and requires no cleanup.

Fixes: 096335b3 ("mlx4_core: Allow dynamic MTU configuration for IB ports")
Signed-off-by: NTarick Bedeir <tarick@google.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We used to initialize ptr_ring during TUNSETIFF, this is because its
size depends on the tx_queue_len of netdevice. And we try to clean it
up when socket were detached from netdevice. A race were spotted when
trying to do uninit during a read which will lead a use after free for
pointer ring. Solving this by always initialize a zero size ptr_ring
in open() and do resizing during TUNSETIFF, and then we can safely do
cleanup during close(). With this, there's no need for the workaround
that was introduced by commit 4df0bfc7 ("tun: fix a memory leak
for tfile->tx_array").

Reported-by: syzbot+e8b902c3c3fadf0a9dba@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Fixes: 1576d986 ("tun: switch to use skb array for tx")
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-05-14

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix nfp to allow zero-length BPF capabilities, meaning the nfp
   capability parsing loop will otherwise exit early if the last
   capability is zero length and therefore driver will fail to probe
   with an error such as:

     nfp: BPF capabilities left after parsing, parsed:92 total length:100
     nfp: invalid BPF capabilities at offset:92

   Fix from Jakub.

2) libbpf's bpf_object__open() may return IS_ERR_OR_NULL() and not
   just an error. Fix libbpf's bpf_prog_load_xattr() to handle that
   case as well, also from Jakub.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:

1) Fix handling of simultaneous open TCP connection in conntrack,
   from Jozsef Kadlecsik.

2) Insufficient sanitify check of xtables extension names, from
   Florian Westphal.

3) Skip unnecessary synchronize_rcu() call when transaction log
   is already empty, from Florian Westphal.

4) Incorrect destination mac validation in ebt_stp, from Stephen
   Hemminger.

5) xtables module reference counter leak in nft_compat, from
   Florian Westphal.

6) Incorrect connection reference counting logic in IPVS
   one-packet scheduler, from Julian Anastasov.

7) Wrong stats for 32-bits CPU in IPVS, also from Julian.

8) Calm down sparse error in netfilter core, also from Florian.

9) Use nla_strlcpy to fix compilation warning in nfnetlink_acct
   and nfnetlink_cthelper, again from Florian.

10) Missing module alias in icmp and icmp6 xtables extensions,
    from Florian Westphal.

11) Base chain statistics in nf_tables may be unset/null, from Florian.

12) Fix handling of large matchinfo size in nft_compat, this includes
    one preparation for before this fix. From Florian.

13) Fix bogus EBUSY error when deleting chains due to incorrect reference
    counting from the preparation phase of the two-phase commit protocol.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rebooting while qedr is loaded with a VLAN interface present
results in unregister_netdevice waiting for the usage count
to become free.
The fix is that rdma devices should be removed before unregistering
the netdevice, to assure all references to ndev are decreased.

Fixes: cee9fbd8 ("qede: Add qedr framework")
Signed-off-by: NAriel Elior <ariel.elior@cavium.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver supports EISA devices in addition to PCI devices, and relied
on the legacy behavior of the pci_dma* shims to pass on a NULL pointer
to the DMA API, and the DMA API being able to handle that.  When the
NULL forwarding broke the EISA support got broken.  Fix this by converting
to the DMA API instead of the legacy PCI shims.

Fixes: 4167b2ad ("PCI: Remove NULL device handling from PCI DMA API")
Reported-by: Ntedheadster <tedheadster@gmail.com>
Tested-by: Ntedheadster <tedheadster@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packet sockets allow construction of packets shorter than
dev->hard_header_len to accommodate protocols with variable length
link layer headers. These packets are padded to dev->hard_header_len,
because some device drivers interpret that as a minimum packet size.

packet_snd reserves dev->hard_header_len bytes on allocation.
SOCK_DGRAM sockets call skb_push in dev_hard_header() to ensure that
link layer headers are stored in the reserved range. SOCK_RAW sockets
do the same in tpacket_snd, but not in packet_snd.

Syzbot was able to send a zero byte packet to a device with massive
116B link layer header, causing padding to cross over into skb_shinfo.
Fix this by writing from the start of the llheader reserved range also
in the case of packet_snd/SOCK_RAW.

Update skb_set_network_header to the new offset. This also corrects
it for SOCK_DGRAM, where it incorrectly double counted reserve due to
the skb_push in dev_hard_header.

Fixes: 9ed988cd ("packet: validate variable length ll headers")
Reported-by: syzbot+71d74a5406d02057d559@syzkaller.appspotmail.com
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the -EBUSY error return path is not free'ing resources
allocated earlier, leaving a memory leak. Fix this by exiting via the
error exit label err5 that performs the necessary resource clean
up.

Detected by CoverityScan, CID#1432975 ("Resource leak")

Fixes: 9744a6fc ("netfilter: nf_tables: check if same extensions are set when adding elements")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Pull networking fixes from David Miller:

 1) Verify lengths of keys provided by the user is AF_KEY, from Kevin
    Easton.

 2) Add device ID for BCM89610 PHY. Thanks to Bhadram Varka.

 3) Add Spectre guards to some ATM code, courtesy of Gustavo A. R.
    Silva.

 4) Fix infinite loop in NSH protocol code. To Eric Dumazet we are most
    grateful for this fix.

 5) Line up /proc/net/netlink headers properly. This fix from YU Bo, we
    do appreciate.

 6) Use after free in TLS code. Once again we are blessed by the
    honorable Eric Dumazet with this fix.

 7) Fix regression in TLS code causing stalls on partial TLS records.
    This fix is bestowed upon us by Andrew Tomt.

 8) Deal with too small MTUs properly in LLC code, another great gift
    from Eric Dumazet.

 9) Handle cached route flushing properly wrt. MTU locking in ipv4, to
    Hangbin Liu we give thanks for this.

10) Fix regression in SO_BINDTODEVIC handling wrt. UDP socket demux.
    Paolo Abeni, he gave us this.

11) Range check coalescing parameters in mlx4 driver, thank you Moshe
    Shemesh.

12) Some ipv6 ICMP error handling fixes in rxrpc, from our good brother
    David Howells.

13) Fix kexec on mlx5 by freeing IRQs in shutdown path. Daniel Juergens,
    you're the best!

14) Don't send bonding RLB updates to invalid MAC addresses. Debabrata
    Benerjee saved us!

15) Uh oh, we were leaking in udp_sendmsg and ping_v4_sendmsg. The ship
    is now water tight, thanks to Andrey Ignatov.

16) IPSEC memory leak in ixgbe from Colin Ian King, man we've got holes
    everywhere!

17) Fix error path in tcf_proto_create, Jiri Pirko what would we do
    without you!

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits)
  net sched actions: fix refcnt leak in skbmod
  net: sched: fix error path in tcf_proto_create() when modules are not configured
  net sched actions: fix invalid pointer dereferencing if skbedit flags missing
  ixgbe: fix memory leak on ipsec allocation
  ixgbevf: fix ixgbevf_xmit_frame()'s return type
  ixgbe: return error on unsupported SFP module when resetting
  ice: Set rq_last_status when cleaning rq
  ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
  mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'
  bonding: send learning packets for vlans on slave
  bonding: do not allow rlb updates to invalid mac
  net/mlx5e: Err if asked to offload TC match on frag being first
  net/mlx5: E-Switch, Include VF RDMA stats in vport statistics
  net/mlx5: Free IRQs in shutdown path
  rxrpc: Trace UDP transmission failure
  rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages
  rxrpc: Fix the min security level for kernel calls
  rxrpc: Fix error reception on AF_INET6 sockets
  rxrpc: Fix missing start of call timeout
  qed: fix spelling mistake: "taskelt" -> "tasklet"
  ...

Pull NFS client fixes from Anna Schumaker:
 "These patches fix both a possible corruption during NFSoRDMA MR
  recovery, and a sunrpc tracepoint crash.

  Additionally, Trond has a new email address to put in the MAINTAINERS
  file"

* tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  Change Trond's email address in MAINTAINERS
  sunrpc: Fix latency trace point crashes
  xprtrdma: Fix list corruption / DMAR errors during MR recovery