提交 · a5f7949570dc7262d3239739b0cdaa001f935d4b · openeuler / Kernel

24 8月, 2020 1 次提交

regulator: mp886x: use "mps,switch-frequency-hz" · a5f79495

由 Jisheng Zhang 提交于 8月 24, 2020

As Rob suggested, use the "mps,switch-frequency-hz" instead of the
"mps,switch-frequency" for switch frequency. Fortunately, the switch
frequency support isn't released, so we can modify it now without
any concern.
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200824102402.4047fa5f@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

a5f79495

22 8月, 2020 17 次提交

Merge series "regulator: Fix W=1 build warning when CONFIG_OF=n" from Jisheng... · 23ce1e5c

由 Mark Brown 提交于 8月 21, 2020

Merge series "regulator: Fix W=1 build warning when CONFIG_OF=n" from Jisheng Zhang <Jisheng.Zhang@synaptics.com>:

Fixing W=1 build warning when no support for device tree is there.

Since v1:
  - fix the warning with __maybe_unused instead of CONFIG_OF macro
  - add 3 more patches to fix the same issue

Jisheng Zhang (15):
  regulator: 88pg86x: Fix W=1 build warning when CONFIG_OF=n
  regulator: da9210: Fix W=1 build warning when CONFIG_OF=n
  regulator: fan53555: Fix W=1 build warning when CONFIG_OF=n
  regulator: fixed: Fix W=1 build warnings when CONFIG_OF=n
  regulator: ltc3589: Fix W=1 build warning when CONFIG_OF=n
  regulator: ltc3676: Fix W=1 build warning when CONFIG_OF=n
  regulator: max1586: Fix W=1 build warning when CONFIG_OF=n
  regulator: max77826: Fix W=1 build warning when CONFIG_OF=n
  regulator: pwm: Fix W=1 build warning when CONFIG_OF=n
  regulator: stm32-pwr: Fix W=1 build warning when CONFIG_OF=n
  regulator: stm32-vrefbuf: Fix W=1 build warning when CONFIG_OF=n
  regulator: sy8106a: Fix W=1 build warning when CONFIG_OF=n
  regulator: qcom-rpmh: Fix W=1 build warning when CONFIG_OF=n
  regulator: stm32-booster: Fix W=1 build warning when CONFIG_OF=n
  regulator: tps65023: Fix W=1 build warning when CONFIG_OF=n

 drivers/regulator/88pg86x.c             |  2 +-
 drivers/regulator/da9210-regulator.c    |  2 +-
 drivers/regulator/fan53555.c            |  2 +-
 drivers/regulator/fixed.c               | 16 ++++++++--------
 drivers/regulator/ltc3589.c             |  2 +-
 drivers/regulator/ltc3676.c             |  2 +-
 drivers/regulator/max1586.c             |  2 +-
 drivers/regulator/max77826-regulator.c  |  2 +-
 drivers/regulator/pwm-regulator.c       |  2 +-
 drivers/regulator/qcom-rpmh-regulator.c |  2 +-
 drivers/regulator/stm32-booster.c       |  2 +-
 drivers/regulator/stm32-pwr.c           |  2 +-
 drivers/regulator/stm32-vrefbuf.c       |  2 +-
 drivers/regulator/sy8106a-regulator.c   |  2 +-
 drivers/regulator/tps65023-regulator.c  |  2 +-
 15 files changed, 22 insertions(+), 22 deletions(-)

--
2.28.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

23ce1e5c

regulator: dbx500: Remove unused debugfs goto label · c0e53a44

由 Fabio Estevam 提交于 8月 21, 2020

The following build warning is seen after commit 8bdaa438 ("regulator:
dbx500: no need to check return value of debugfs_create functions"):

drivers/regulator/dbx500-prcmu.c:144:1: warning: label 'exit_no_debugfs' defined but not used [-Wunused-label]

Remove the unused label and its associated error message.

Fixes: 8bdaa438 ("regulator: dbx500: no need to check return value of debugfs_create functions")
Reported-by: NOlof's autobuilder <build@lixom.net>
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200821144823.13404-1-festevam@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

c0e53a44

regulator: tps65023: Fix W=1 build warning when CONFIG_OF=n · 8536bf81

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/tps65023-regulator.c:319:34: warning: ‘tps65023_of_match’ defined but not used [-Wunused-const-variable=]
  319 | static const struct of_device_id tps65023_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821112009.58ee8511@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

8536bf81

regulator: stm32-booster: Fix W=1 build warning when CONFIG_OF=n · b461ac1c

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/stm32-booster.c:104:34: warning: ‘stm32_booster_of_match’ defined but not used [-Wunused-const-variable=]
  104 | static const struct of_device_id stm32_booster_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Link: https://lore.kernel.org/r/20200821111943.29b2b4ca@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

b461ac1c

regulator: qcom-rpmh: Fix W=1 build warning when CONFIG_OF=n · a2508eeb

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/qcom-rpmh-regulator.c:970:34: warning: ‘rpmh_regulator_match_table’ defined but not used [-Wunused-const-variable=]
  970 | static const struct of_device_id rpmh_regulator_match_table[] = {
      |                                  ^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111913.1096f7cc@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

a2508eeb

regulator: sy8106a: Fix W=1 build warning when CONFIG_OF=n · bbe26107

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/sy8106a-regulator.c:126:34: warning: ‘sy8106a_i2c_of_match’ defined but not used [-Wunused-const-variable=]
  126 | static const struct of_device_id sy8106a_i2c_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111820.5c6ddb04@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

bbe26107

regulator: stm32-vrefbuf: Fix W=1 build warning when CONFIG_OF=n · d5579e7a

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/stm32-vrefbuf.c:287:34: warning: ‘stm32_vrefbuf_of_match’ defined but not used [-Wunused-const-variable=]
  287 | static const struct of_device_id stm32_vrefbuf_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Link: https://lore.kernel.org/r/20200821111755.4c461039@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

d5579e7a

regulator: stm32-pwr: Fix W=1 build warning when CONFIG_OF=n · a94a11ce

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/stm32-pwr.c:169:34: warning: ‘stm32_pwr_of_match’ defined but not used [-Wunused-const-variable=]
  169 | static const struct of_device_id stm32_pwr_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111726.38e0e746@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

a94a11ce

regulator: pwm: Fix W=1 build warning when CONFIG_OF=n · dc8c5ea3

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/pwm-regulator.c:393:34: warning: ‘pwm_of_match’ defined but not used [-Wunused-const-variable=]
  393 | static const struct of_device_id pwm_of_match[] = {
      |                                  ^~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111658.59a7218b@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

dc8c5ea3

regulator: max77826: Fix W=1 build warning when CONFIG_OF=n · 7bf0a29c

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/max77826-regulator.c:277:34: warning: ‘max77826_of_match’ defined but not used [-Wunused-const-variable=]
  277 | static const struct of_device_id max77826_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111631.4e799c86@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

7bf0a29c

regulator: max1586: Fix W=1 build warning when CONFIG_OF=n · 44bc5d16

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/max1586.c:204:34: warning: ‘max1586_of_match’ defined but not used [-Wunused-const-variable=]
  204 | static const struct of_device_id max1586_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111601.26243417@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

44bc5d16

regulator: ltc3676: Fix W=1 build warning when CONFIG_OF=n · 1d4c1e02

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/ltc3676.c:371:34: warning: ‘ltc3676_of_match’ defined but not used [-Wunused-const-variable=]
  371 | static const struct of_device_id ltc3676_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111517.59d7b8c8@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

1d4c1e02

regulator: ltc3589: Fix W=1 build warning when CONFIG_OF=n · 8ece3156

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/ltc3589.c:460:34: warning: ‘ltc3589_of_match’ defined but not used [-Wunused-const-variable=]
  460 | static const struct of_device_id ltc3589_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111449.7cf580f2@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

8ece3156

regulator: fixed: Fix W=1 build warnings when CONFIG_OF=n · 0f037255

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warnings when CONFIG_OF=n:

drivers/regulator/fixed.c:48:36: warning: ‘fixed_clkenable_data’ defined but not used [-Wunused-const-variable=]
   48 | static const struct fixed_dev_type fixed_clkenable_data = {
      |                                    ^~~~~~~~~~~~~~~~~~~~
drivers/regulator/fixed.c:44:36: warning: ‘fixed_voltage_data’ defined but not used [-Wunused-const-variable=]
   44 | static const struct fixed_dev_type fixed_voltage_data = {
      |                                    ^~~~~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111403.3e8b58a3@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

0f037255

regulator: fan53555: Fix W=1 build warning when CONFIG_OF=n · 5e97d7e8

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/fan53555.c:439:34: warning: ‘fan53555_dt_ids’ defined but not used [-Wunused-const-variable=]
  439 | static const struct of_device_id fan53555_dt_ids[] = {
      |                                  ^~~~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111324.430fe1da@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

5e97d7e8

regulator: da9210: Fix W=1 build warning when CONFIG_OF=n · 2d2a84ae

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/da9210-regulator.c:128:34: warning: ‘da9210_dt_ids’ defined but not used [-Wunused-const-variable=]
  128 | static const struct of_device_id da9210_dt_ids[] = {
      |                                  ^~~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200821111235.14473a88@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

2d2a84ae

regulator: 88pg86x: Fix W=1 build warning when CONFIG_OF=n · e11e068c

由 Jisheng Zhang 提交于 8月 21, 2020

Fix below warning when CONFIG_OF=n:

drivers/regulator/88pg86x.c:87:34: warning: ‘pg86x_dt_ids’ defined but not used [-Wunused-const-variable=]
87 | static const struct of_device_id pg86x_dt_ids [] = {
   |                                  ^~~~~~~~~~~~
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200821111210.0a0bed94@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

e11e068c

19 8月, 2020 18 次提交

regulator: rt4801: Select REGMAP_I2C to fix build error · 02532cb8

由 Axel Lin 提交于 8月 19, 2020

Fix build error when CONFIG_REGMAP_I2C is not set.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20200819085959.1914471-1-axel.lin@ingics.comSigned-off-by: NMark Brown <broonie@kernel.org>

02532cb8

regulator: dbx500: no need to check return value of debugfs_create functions · 8bdaa438

由 Greg Kroah-Hartman 提交于 8月 18, 2020

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200818133701.462958-1-gregkh@linuxfoundation.orgSigned-off-by: NMark Brown <broonie@kernel.org>

8bdaa438

regulator: set of_node for qcom vbus regulator · 66c3b96a

由 Jonathan Marek 提交于 8月 18, 2020

This allows the regulator to be found by devm_regulator_get().

Fixes: 4fe66d5a ("regulator: Add support for QCOM PMIC VBUS booster")
Signed-off-by: NJonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200818162508.5246-1-jonathan@marek.caSigned-off-by: NMark Brown <broonie@kernel.org>

66c3b96a

Merge series "regulator: mp886x: two features and dt json convert" from... · 20638181

由 Mark Brown 提交于 8月 18, 2020

Merge series "regulator: mp886x: two features and dt json convert" from Jisheng Zhang <jszhang3@mail.ustc.edu.cn>
Jisheng Zhang <Jisheng.Zhang@synaptics.com>:

From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

This is to improve the mp886x regulator driver support.
patch1 implments .set_ramp_delay
patch2 and patch3 support the switch freq setting
patch4 converts dt binding to json-schema

Since v2:
  - put any schema conversions at the end of the series as Mark
    suggested.

Jisheng Zhang (4):
  regulator: mp886x: implement set_ramp_delay
  dt-bindings: regulator: mp886x: support mps,switch-frequency
  regulator: mp886x: support setting switch freq
  dt-bindings: regulator: Convert mp886x to json-schema

 .../devicetree/bindings/regulator/mp886x.txt  |  27 -----
 .../bindings/regulator/mps,mp886x.yaml        |  58 ++++++++++
 drivers/regulator/mp886x.c                    | 109 +++++++++++++++++-
 3 files changed, 164 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/mp886x.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/mps,mp886x.yaml

--
2.28.0.rc1

20638181

Merge series "regulator: fix deadlock vs memory reclaim" from Michał Mirosław... · 4c13f934

由 Mark Brown 提交于 8月 18, 2020

Merge series "regulator: fix deadlock vs memory reclaim" from Michał Mirosław <mirq-linux@rere.qmqm.pl>:

For systems that have eg. eMMC storage using voltage regulator, memory
reclaim path might call back into regulator subsystem. This means we
have to make sure no allocations happen with a regulator or regulator
list locked.

After this series I see no more lockdep complaints on my test system,
but please review and test further.

First four patches move allocations out of locked regions, next three
came as a drive-by cleanups.

---
v2: fix bug in patch #4 spotted by kernel test robot
    reworded commit #7 description

Michał Mirosław (7):
  regulator: push allocation in regulator_init_coupling() outside of
    lock
  regulator: push allocation in regulator_ena_gpio_request() out of lock
  regulator: push allocations in create_regulator() outside of lock
  regulator: push allocation in set_consumer_device_supply() out of lock
  regulator: plug of_node leak in regulator_register()'s error path
  regulator: cleanup regulator_ena_gpio_free()
  regulator: remove superfluous lock in regulator_resolve_coupling()

 drivers/regulator/core.c | 164 +++++++++++++++++++++------------------
 1 file changed, 87 insertions(+), 77 deletions(-)

--
2.20.1

4c13f934

regulator: qcom_spmi: Improve readability for setting up enable/mode pin control · 6a1fe83b

由 Axel Lin 提交于 8月 01, 2020

By checking data->pin_ctrl_enable / data->pin_ctrl_hpm flags first, then
use switch-case to improve readability.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200801054820.134859-1-axel.lin@ingics.comSigned-off-by: NMark Brown <broonie@kernel.org>

6a1fe83b

regulator: Remove pointer table overallocation · 7d819664

由 Michał Mirosław 提交于 8月 09, 2020

The code allocates sizeof(regulator_dev) for a pointer. Make it less
generous. Let kcalloc() calculate the size, while at it.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: NDmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/407fbd06a02caf038a9ba3baa51c7d6d47cd6517.1597000795.git.mirq-linux@rere.qmqm.plSigned-off-by: NMark Brown <broonie@kernel.org>

7d819664

regulator: Convert sy8824x to json-schema · aedf7451

由 Jisheng Zhang 提交于 8月 03, 2020

Convert the sy8824x binding to DT schema format using json-schema.
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200803144436.5d2b7e54@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

aedf7451

regulator: Add DT bindings for RaspberryPi 7" display ATTINY88-based regulator/backlight controller · 9c535960

由 Marek Vasut 提交于 8月 09, 2020

Add DT bindings for RaspberryPi 7" display ATTINY88-based
regulator/backlight controller, this one is used in the
Raspberry Pi 7" touchscreen display unit.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20200809105938.6388-1-marex@denx.deSigned-off-by: NMark Brown <broonie@kernel.org>

9c535960

regulator: rpi-panel: Add regulator/backlight driver for RPi panel · 38573472

由 Marek Vasut 提交于 8月 09, 2020

This regulator/backlight driver handles the ATTINY88 present on the
RPi 7" touchscreen panel and exposes the power/backlight interfaces.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20200809105938.6388-2-marex@denx.deSigned-off-by: NMark Brown <broonie@kernel.org>

38573472

regulator: Avoid grabbing regulator lock during suspend/resume · 0955f5be

由 Stephen Boyd 提交于 8月 04, 2020

I see it takes about 5us per regulator to grab the lock, check that this
regulator isn't going to do anything for suspend, and then release the
lock. When that is combined with PMICs that have dozens of regulators we
get into a state where we spend a few miliseconds doing a bunch of
locking operations synchronously to figure out that there's nothing to
do. Let's reorganize the code here a bit so that we don't grab the lock
until we're actually going to do something so that suspend is a little
faster.
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200804070837.1084024-1-swboyd@chromium.orgSigned-off-by: NMark Brown <broonie@kernel.org>

0955f5be

regulator: sy8827n: Fix W=1 build warning when CONFIG_OF=n · a16138a3

由 Jisheng Zhang 提交于 8月 10, 2020

Fixing W=1 build warning when no support for device tree is there.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20200810095753.59ce9f75@xhacker.debianSigned-off-by: NMark Brown <broonie@kernel.org>

a16138a3

regulator: da9211: add cache_type · 989e08c3

由 Hsin-Yi Wang 提交于 8月 12, 2020

Add regmap_cache to reduce wakeups events of interrupt if regulator is
accessed frequently. This results in saving more power.
Suggested-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHsin-Yi Wang <hsinyi@chromium.org>
Acked-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200812133101.2513317-1-hsinyi@chromium.orgSigned-off-by: NMark Brown <broonie@kernel.org>

989e08c3

regulator: lp8755: Get rid of lp8755_read/lp8755_write/lp8755_update_bits · 4cf12735

由 Axel Lin 提交于 8月 02, 2020

Just use regmap_read/regmap_write/regmap_update_bits instead.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20200802090638.380589-1-axel.lin@ingics.comSigned-off-by: NMark Brown <broonie@kernel.org>

4cf12735

regulator: rt4801: Fix the dt-binding document for dtc check. · 6f4ac284

由 ChiYuan Huang 提交于 8月 15, 2020

Fix the dt-binding document for dtc check.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1597461262-25878-3-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

6f4ac284

regulator: rt4801: Add DT binding documentation · fd6b928d

由 ChiYuan Huang 提交于 8月 15, 2020

Add a devicetree binding documentation for the rt4801 regulator driver.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1597461262-25878-2-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

fd6b928d

regulator: rt4801: Add support for RT4801 Display Bias regulator driver · 5bbbfc7f

由 ChiYuan Huang 提交于 8月 15, 2020

Adds support for the RT4801 DSV. It has two regulators (DSVP/DSVN) with
an I2C interface. DSVP/DSVN can provide the display panel module for the
positive/negative voltage range from (+/-)4V to (+/-)6V.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1597461262-25878-1-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

5bbbfc7f

regulator: Convert pfuze100 to json-schema · b2ad0be5

由 Anson Huang 提交于 8月 03, 2020

Convert the pfuze100 regulator binding to DT schema format using
json-schema.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1596421439-19591-1-git-send-email-Anson.Huang@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

b2ad0be5

17 8月, 2020 4 次提交

regulator: cleanup regulator_ena_gpio_free() · 2dbf0855

由 Michał Mirosław 提交于 8月 12, 2020

Since only regulator_ena_gpio_request() allocates rdev->ena_pin, and it
guarantees that same gpiod gets same pin structure, it is enough to
compare just the pointers. Also we know there can be only one matching
entry on the list. Rework the code take advantage of the facts.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/3ff002c7aa3bd774491af4291a9df23541fcf892.1597195321.git.mirq-linux@rere.qmqm.plSigned-off-by: NMark Brown <broonie@kernel.org>

2dbf0855

regulator: plug of_node leak in regulator_register()'s error path · d3c73156

由 Michał Mirosław 提交于 8月 12, 2020

By calling device_initialize() earlier and noting that kfree(NULL) is
ok, we can save a bit of code in error handling and plug of_node leak.
Fixed commit already did part of the work.

Fixes: 9177514c ("regulator: fix memory leak on error path of regulator_register()")
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Acked-by: NVladimir Zapolskiy <vz@mleia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/f5035b1b4d40745e66bacd571bbbb5e4644d21a1.1597195321.git.mirq-linux@rere.qmqm.plSigned-off-by: NMark Brown <broonie@kernel.org>

d3c73156

regulator: push allocation in set_consumer_device_supply() out of lock · 5c065401

由 Michał Mirosław 提交于 8月 12, 2020

Pull regulator_list_mutex into set_consumer_device_supply() and keep
allocations outside of it. Fourth of the fs_reclaim deadlock case.

Fixes: 45389c47 ("regulator: core: Add early supply resolution for regulators")
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/f0380bdb3d60aeefa9693c4e234d2dcda7e56747.1597195321.git.mirq-linux@rere.qmqm.plSigned-off-by: NMark Brown <broonie@kernel.org>

5c065401

regulator: push allocations in create_regulator() outside of lock · 87fe29b6

由 Michał Mirosław 提交于 8月 12, 2020

Move all allocations outside of the regulator_lock()ed section.

======================================================
WARNING: possible circular locking dependency detected
5.7.13+ #535 Not tainted
------------------------------------------------------
f2fs_discard-179:7/702 is trying to acquire lock:
c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0

but task is already holding lock:
cb95b080 (&dcc->cmd_lock){+.+.}-{3:3}, at: __issue_discard_cmd+0xec/0x5f8

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

[...]

-> #3 (fs_reclaim){+.+.}-{0:0}:
       fs_reclaim_acquire.part.11+0x40/0x50
       fs_reclaim_acquire+0x24/0x28
       __kmalloc_track_caller+0x54/0x218
       kstrdup+0x40/0x5c
       create_regulator+0xf4/0x368
       regulator_resolve_supply+0x1a0/0x200
       regulator_register+0x9c8/0x163c

[...]

other info that might help us debug this:

Chain exists of:
  regulator_list_mutex --> &sit_i->sentry_lock --> &dcc->cmd_lock

[...]

Fixes: f8702f9e ("regulator: core: Use ww_mutex for regulators locking")
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/6eebc99b2474f4ffaa0405b15178ece0e7e4f608.1597195321.git.mirq-linux@rere.qmqm.plSigned-off-by: NMark Brown <broonie@kernel.org>

87fe29b6

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功