This patch fixes multiple coding style issues in file,
InterfaceDld.c, found by checkpatch.pl.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the Analog Devices AD5360, AD5361, AD5362, AD5363,
AD5370, AD5371, AD5372, AD5373 multi-channel digital-to-analog converters.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There were no range checks in the original code so the user could
write past the end of the array.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The indents didn't line up at all in the original code.  I also fixed
a bunch of other white issues as I went along.  I changed the comment
style and removed some commented out code.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We need to verify that we're not writing past the end of the array.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The indents on this file didn't line up so it was hard to work with.
I changed other white space issues as I came across them.  I also
deleted or changed some couple comments and the comment style.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some defines are no longer referenced in the code, so removed them.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replaced pci map/unmap and set_mask calls with their dma equivalents.
Also updated comments to reflect this.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* Currently the tx queue is only stopped when the current packet fails.
Check if the next packet will fail, and stop the queue if so.

* Removed associated item from TODO list in the README.

* Also minor fixup as adapter was being declared as null and immediately set
to a value.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Used the convenience macros DEFINE_PCI_DEVICE_TABLE and PCI_VDEVICE to
tidy up the device table definition.

Also remove the corresponding TODO item from the README.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Previous update was to replace pci_alloc with dma_alloc calls. I missed
replacing the corresponding pci_free_ calls with the dma versions. Now
done. Thanks to Denis Kirjanov <kirjanov@gmail.com> for pointing this
out.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use dma_allocs instead of pci_allocs, so we can use GFP_KERNEL
allocations.

Also removed this item from the TODO list
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* Following on from making rx_ring.fbr use a common structure - reversed
the fbr[] array indicies so that index 1 = FBR0 and index 0 = FBR1,
which allows USE_FBR0 define to work.

* Also fixed up minor issues where indexes into the array were out of
bounds in some places.

* Removed rx_ring.fbr common stuct TODO item from README
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Sharing a common structure by moving common structure items into
fbr_lookup.

TODO - Currently will not work if USE_FBR0 = 0 as FBR1 uses fbr[1]
which is removed in this case
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Two helper functions for adding 10bit/12bit umbers with wrapping are
defined in the header. Moved them to the driver .c file.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver now resides in a single file with a separate header with
registers, updated the README TODO list.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move et1310_tx.h contents into et131x.c and delete et1310_tx.h
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move et1310_rx.h contents into et131x.c and delete et1310_rx.h
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move et131x_defs.h contents into et131x.c and delete et131x_defs.h
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move et131x_adapter.h contents into et131x.c and delete et131x_adapter.h
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move et1310_phy.h register defines into et131x.h and delete
et1310_phy.h
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move et1310_address_map.h register defines into et131x.h and delete
et1310_address_map.h
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Header file should only have register defines, moved non-register
defines to et131x.c
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function declarations in et131x.h are no longer used now all
functions are in one file. Removed declarations from et131x.h and
added any required forward declarations to et131x.c.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Created one big .c file for the driver, moving the contents of all
driver .c files into it.
Signed-off-by: NMark Einon <mark.einon@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently it is possible to write negative values to the ad5686's raw attribute.
This will cause undefined behaviour, so reject negative values.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Scale is currently reported in volts instead of millivolts. This patch fixes it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add the missing "voltage" chan_type to the powerdown attributes.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The ad5791 currently assumes that the negative and positive supply have the
same absolute value, which is not necessarily true. This patch introduces a
offset attribute which will contain the negative supply voltage scaled
according to the iio spec. The raw attribute now accepts values in the range
of 0 to max instead of -max/2 to max/2.

While we are at it also fix the vref span calculation. Since both positive and
negative reference voltages are specificed as absolute values we need to add
them and not subtract them to get the reference voltage span.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit c5b99396 ("staging:iio:dac:ad5791 chan spec conversion.") introduced a
small bug, using storagebits instead of realbits throughout the driver, which
causes the driver to work incorrectly. This patch fixes it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No functional changes.
Fix Kconfig description.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the Analog Devices AD6064, AD6064-1, AD6044, AD6024
quad channel digital-to-analog converter devices.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

According to OMAP3 TRM access to MMU registers shall be strictly 32-bit
aligned.
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Acked-by: NOmar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The original code left it up to the user to decide how much data to
copy, but that doesn't work with a fixed size array.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There's a lot of unused and unneeded things in this makefile, so delete
it all.
Reported-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There's a lot of unused and unneeded things in this makefile, so delete
it all.
Reported-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There's a lot of unused and unneeded things in this makefile, so delete
it all.
Reported-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>