- 09 6月, 2016 2 次提交
-
-
由 Guillaume Nault 提交于
Unused fields of udp_cfg must be all zeros. Otherwise setup_udp_tunnel_sock() fills ->gro_receive and ->gro_complete callbacks with garbage, eventually resulting in panic when used by udp_gro_receive(). [ 72.694123] BUG: unable to handle kernel paging request at ffff880033f87d78 [ 72.695518] IP: [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] PGD 26e2067 PUD 26e3067 PMD 342ed063 PTE 8000000033f87163 [ 72.696530] Oops: 0011 [#1] SMP KASAN [ 72.696530] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pptp gre pppox ppp_generic slhc crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel evdev aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper serio_raw acpi_cpufreq button proc\ essor ext4 crc16 jbd2 mbcache virtio_blk virtio_net virtio_pci virtio_ring virtio [ 72.696530] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.7.0-rc1 #1 [ 72.696530] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 72.696530] task: ffff880035b59700 ti: ffff880035b70000 task.ti: ffff880035b70000 [ 72.696530] RIP: 0010:[<ffff880033f87d78>] [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP: 0018:ffff880035f87bc0 EFLAGS: 00010246 [ 72.696530] RAX: ffffed000698f996 RBX: ffff88003326b840 RCX: ffffffff814cc823 [ 72.696530] RDX: ffff88003326b840 RSI: ffff880033e48038 RDI: ffff880034c7c780 [ 72.696530] RBP: ffff880035f87c18 R08: 000000000000a506 R09: 0000000000000000 [ 72.696530] R10: ffff880035f87b38 R11: ffff880034b9344d R12: 00000000ebfea715 [ 72.696530] R13: 0000000000000000 R14: ffff880034c7c780 R15: 0000000000000000 [ 72.696530] FS: 0000000000000000(0000) GS:ffff880035f80000(0000) knlGS:0000000000000000 [ 72.696530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.696530] CR2: ffff880033f87d78 CR3: 0000000033c98000 CR4: 00000000000406a0 [ 72.696530] Stack: [ 72.696530] ffffffff814cc834 ffff880034b93468 0000001481416818 ffff88003326b874 [ 72.696530] ffff880034c7ccb0 ffff880033e48038 ffff88003326b840 ffff880034b93462 [ 72.696530] ffff88003326b88a ffff88003326b88c ffff880034b93468 ffff880035f87c70 [ 72.696530] Call Trace: [ 72.696530] <IRQ> [ 72.696530] [<ffffffff814cc834>] ? udp_gro_receive+0x1c6/0x1f9 [ 72.696530] [<ffffffff814ccb1c>] udp4_gro_receive+0x2b5/0x310 [ 72.696530] [<ffffffff814d989b>] inet_gro_receive+0x4a3/0x4cd [ 72.696530] [<ffffffff81431b32>] dev_gro_receive+0x584/0x7a3 [ 72.696530] [<ffffffff810adf7a>] ? __lock_is_held+0x29/0x64 [ 72.696530] [<ffffffff814321f7>] napi_gro_receive+0x124/0x21d [ 72.696530] [<ffffffffa000b145>] virtnet_receive+0x8df/0x8f6 [virtio_net] [ 72.696530] [<ffffffffa000b27e>] virtnet_poll+0x1d/0x8d [virtio_net] [ 72.696530] [<ffffffff81431350>] net_rx_action+0x15b/0x3b9 [ 72.696530] [<ffffffff815893d6>] __do_softirq+0x216/0x546 [ 72.696530] [<ffffffff81062392>] irq_exit+0x49/0xb6 [ 72.696530] [<ffffffff81588e9a>] do_IRQ+0xe2/0xfa [ 72.696530] [<ffffffff81587a49>] common_interrupt+0x89/0x89 [ 72.696530] <EOI> [ 72.696530] [<ffffffff810b05df>] ? trace_hardirqs_on_caller+0x229/0x270 [ 72.696530] [<ffffffff8102b3c7>] ? default_idle+0x1c/0x2d [ 72.696530] [<ffffffff8102b3c5>] ? default_idle+0x1a/0x2d [ 72.696530] [<ffffffff8102bb8c>] arch_cpu_idle+0xa/0xc [ 72.696530] [<ffffffff810a6c39>] default_idle_call+0x1a/0x1c [ 72.696530] [<ffffffff810a6d96>] cpu_startup_entry+0x15b/0x20f [ 72.696530] [<ffffffff81039a81>] start_secondary+0x12c/0x133 [ 72.696530] Code: ff ff ff ff ff ff ff ff ff ff 7f ff ff ff ff ff ff ff 7f 00 7e f8 33 00 88 ff ff 6d 61 58 81 ff ff ff ff 5e de 0a 81 ff ff ff ff <00> 5c e2 34 00 88 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 72.696530] RIP [<ffff880033f87d78>] 0xffff880033f87d78 [ 72.696530] RSP <ffff880035f87bc0> [ 72.696530] CR2: ffff880033f87d78 [ 72.696530] ---[ end trace ad7758b9a1dccf99 ]--- [ 72.696530] Kernel panic - not syncing: Fatal exception in interrupt [ 72.696530] Kernel Offset: disabled [ 72.696530] ---[ end Kernel panic - not syncing: Fatal exception in interrupt v2: use empty initialiser instead of "{ NULL }" to avoid relying on first field's type. Fixes: 38fd2af2 ("udp: Add socket based GRO and config") Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2016 23 次提交
-
-
由 Ben Dooks 提交于
The of_find_net_device_by_node() function is defined in <linux/of_net.h> but not included in the .c file that implements it. Fix the following warning by including the header: net/core/net-sysfs.c:1494:19: warning: symbol 'of_find_net_device_by_node' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Toshiaki Makita 提交于
The missing br_vlan_should_use() test caused creation of an unneeded local fdb entry on changing mac address of a bridge device when there is a vlan which is configured on a bridge port but not on the bridge device. Fixes: 2594e906 ("bridge: vlan: add per-vlan struct and move to rhashtables") Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains two Netfilter/IPVS fixes for your net tree, they are: 1) Fix missing alignment in next offset calculation for standard targets, introduced in the previous merge window, patch from Florian Westphal. 2) Fix to correct the handling of outgoing connections which use the SIP-pe such that the binding of a real-server is updated when needed. This was an omission from changes introduced by Marco Angaroni in the previous merge window too, to allow handling of outgoing connections by the SIP-pe. Patch and report came via Simon Horman. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
The v6 tcp stats scan do not provide TLP and ER timer information correctly like the v4 version . This patch fixes that. Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)") Fixes: eed530b6 ("tcp: early retransmit") Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
When offloading classifiers such as u32 or flower to hardware, and the qdisc is clsact (TC_H_CLSACT), then we need to differentiate its classes, since not all of them handle ingress, therefore we must leave those in software path. Add a .tcf_cl_offload() callback, so we can generically handle them, tested on ixgbe. Fixes: 10cbc684 ("net/sched: cls_flower: Hardware offloaded filters statistics support") Fixes: 5b33f488 ("net/flower: Introduce hardware offload support") Fixes: a1b7c5fd ("net: sched: add cls_u32 offload hooks for netdevs") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
The police action is using its own code to initialize tcf hash info, which makes us to forgot to initialize a->hinfo correctly. Fix this by calling the helper function tcf_hash_create() directly. This patch fixed the following crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffff810c099f>] __lock_acquire+0xd3/0xf91 PGD d3c34067 PUD d3e18067 PMD 0 Oops: 0000 [#1] SMP CPU: 2 PID: 853 Comm: tc Not tainted 4.6.0+ #87 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d3e28040 ti: ffff8800d3f6c000 task.ti: ffff8800d3f6c000 RIP: 0010:[<ffffffff810c099f>] [<ffffffff810c099f>] __lock_acquire+0xd3/0xf91 RSP: 0000:ffff88011b203c80 EFLAGS: 00010002 RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000028 RBP: ffff88011b203d40 R08: 0000000000000001 R09: 0000000000000000 R10: ffff88011b203d58 R11: ffff88011b208000 R12: 0000000000000001 R13: ffff8800d3e28040 R14: 0000000000000028 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 00000000d4be1000 CR4: 00000000000006e0 Stack: ffff8800d3e289c0 0000000000000046 000000001b203d60 ffffffff00000000 0000000000000000 ffff880000000000 0000000000000000 ffffffff00000000 ffffffff8187142c ffff88011b203ce8 ffff88011b203ce8 ffffffff8101dbfc Call Trace: <IRQ> [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff8101dbfc>] ? native_sched_clock+0x1a/0x35 [<ffffffff8101dbfc>] ? native_sched_clock+0x1a/0x35 [<ffffffff810a9604>] ? sched_clock_local+0x11/0x78 [<ffffffff810bf6a1>] ? mark_lock+0x24/0x201 [<ffffffff810c1dbd>] lock_acquire+0x120/0x1b4 [<ffffffff810c1dbd>] ? lock_acquire+0x120/0x1b4 [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff81aad89f>] _raw_spin_lock_bh+0x3c/0x72 [<ffffffff8187142c>] ? __tcf_hash_release+0x77/0xd1 [<ffffffff8187142c>] __tcf_hash_release+0x77/0xd1 [<ffffffff81871a27>] tcf_action_destroy+0x49/0x7c [<ffffffff81870b1c>] tcf_exts_destroy+0x20/0x2d [<ffffffff8189273b>] u32_destroy_key+0x1b/0x4d [<ffffffff81892788>] u32_delete_key_freepf_rcu+0x1b/0x1d [<ffffffff810de3b8>] rcu_process_callbacks+0x610/0x82e [<ffffffff8189276d>] ? u32_destroy_key+0x4d/0x4d [<ffffffff81ab0bc1>] __do_softirq+0x191/0x3f4 Fixes: ddf97ccd ("net_sched: add network namespace support for tc actions") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We properly scan the flow list to count number of packets, but John passed 0 to gnet_stats_copy_queue() so we report a zero value to user space instead of the result. Fixes: 64015853 ("net: sched: restrict use of qstats qlen") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== cls_u32 hardware offload fixes This set fixes two small issues with error codes I noticed in cls_u32. Second patch could be viewed as user space API change but that portion of API is not part of any release, yet. Compile tested only. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Return an error if user requested skip-sw and the underlaying hardware cannot handle tc offloads (or offloads are disabled). Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
'err' variable is not set in this test, we would return whatever previous test set 'err' to. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NSridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Fix clang build warning: ./include/uapi/linux/gtp.h:1:9: warning: '_UAPI_LINUX_GTP_H_' is used as a header guard here, followed by #define of a different macro [-Wheader-guard] fix by defining _UAPI_LINUX_GTP_H_ and not _UAPI_LINUX_GTP_H__ Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
trivial fix to spelling mistakes and add missing newline in pr_err messages Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NFugang Duan <fugang.duan@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: Bug fixes. Fix a race condition and VLAN rx acceleration logic. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Since both CTAG and STAG rx acceleration must be enabled together, we only need to check one feature flag (NETIF_F_HW_VLAN_CTAG_RX) before calling __vlan_hwaccel_put_tag(). Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The hardware can only be set to strip or not strip both the VLAN CTAG and STAG. It cannot strip one and not strip the other. Add logic to bnxt_fix_features() to toggle both feature flags when the user is toggling one of them. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Set the is_push flag in the software BD before the tx data is pushed to the chip. It is possible to get the tx interrupt as soon as the tx data is pushed. The tx handler will not handle the event properly if the is_push flag is not set and it will crash. Signed-off-by: NMichael Chan <michael.chan@broadocm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wu Fengguang 提交于
net/rxrpc/rxkad.c:1165:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: David Howells <dhowells@redhat.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sowmini Varadhan says: ==================== RDS: TCP: socket locking RDS packet assembly fixes This three part patchset fixes bugs in synchronization between rds_tcp_accept_one() and the rds-tcp send/recv path. Patch 1 ensures that the lock_sock() is taken appropriately and the RDS datagram reassembly state is reset to synchronize with the receive path. Patch 2 ensures that partially sent RDS datagrams will get retransmitted after rds_tcp_accept_one() switches sockets. Patch 3 fixes a race window which would prematurely re-enable rds_send_xmit() before the rds_tcp_connection setup has been completed in rds_tcp_accept_one(). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The send path needs to be quiesced before resetting callbacks from rds_tcp_accept_one(), and commit eb192840 ("RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sock") achieves this using the c_state and RDS_IN_XMIT bit following the pattern used by rds_conn_shutdown(). However this leaves the possibility of a race window as shown in the sequence below take t_conn_lock in rds_tcp_conn_connect send outgoing syn to peer drop t_conn_lock in rds_tcp_conn_connect incoming from peer triggers rds_tcp_accept_one, conn is marked CONNECTING wait for RDS_IN_XMIT to quiesce any rds_send_xmit threads call rds_tcp_reset_callbacks [.. race-window where incoming syn-ack can cause the conn to be marked UP from rds_tcp_state_change ..] lock_sock called from rds_tcp_reset_callbacks, and we set t_sock to null As soon as the conn is marked UP in the race-window above, rds_send_xmit() threads will proceed to rds_tcp_xmit and may encounter a null-pointer deref on the t_sock. Given that rds_tcp_state_change() is invoked in softirq context, whereas rds_tcp_reset_callbacks() is in workq context, and testing for RDS_IN_XMIT after lock_sock could result in a deadlock with tcp_sendmsg, this commit fixes the race by using a new c_state, RDS_TCP_RESETTING, which will prevent a transition to RDS_CONN_UP from rds_tcp_state_change(). Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
When we switch a connection's sockets in rds_tcp_rest_callbacks, any partially sent datagram must be retransmitted on the new socket so that the receiver can correctly reassmble the RDS datagram. Use rds_send_reset() which is designed for this purpose. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
When rds_tcp_accept_one() has to replace the existing tcp socket with a newer tcp socket (duelling-syn resolution), it must lock_sock() to suppress the rds_tcp_data_recv() path while callbacks are being changed. Also, existing RDS datagram reassembly state must be reset, so that the next datagram on the new socket does not have corrupted state. Similarly when resetting the newly accepted socket, appropriate locks and synchronization is needed. This commit ensures correct synchronization by invoking kernel_sock_shutdown to reset a newly accepted sock, and by taking appropriate lock_sock()s (for old and new sockets) when resetting existing callbacks. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
My prior attempt to fix the backlogs of parents failed. If we return NET_XMIT_CN, our parents wont increase their backlog, so our qdisc_tree_reduce_backlog() should take this into account. v2: Florian Westphal pointed out that we could drop the packet, so we need to save qdisc_pkt_len(skb) in a temp variable before calling fq_codel_drop() Fixes: 9d18562a ("fq_codel: add batch ability to fq_codel_drop()") Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Reported-by: NStas Nichiporovich <stasn77@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
In bpf_perf_event_read() and bpf_perf_event_output(), we must use READ_ONCE() for fetching the struct file pointer, which could get updated concurrently, so we must prevent the compiler from potential refetching. We already do this with tail calls for fetching the related bpf_prog, but not so on stored perf events. Semantics for both are the same with regards to updates. Fixes: a43eec30 ("bpf: introduce bpf_perf_event_output() helper") Fixes: 35578d79 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU conuter") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2016 3 次提交
-
-
由 WANG Cong 提交于
For gso_skb we only update qlen, backlog should be updated too. Note, it is correct to just update these stats at one layer, because the gso_skb is cached there. Reported-by: NStas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Helge Deller 提交于
Commit 538950a1 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") missed to add the compat case for the SO_ATTACH_REUSEPORT_CBPF option. Signed-off-by: NHelge Deller <deller@gmx.de> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Helge Deller 提交于
This fixes the following compiler warnings when compiling the reuseport_bpf testcase on a 32 bit platform: reuseport_bpf.c: In function ‘attach_ebpf’: reuseport_bpf.c:114:15: warning: cast from pointer to integer of ifferent size [-Wpointer-to-int-cast] Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 6月, 2016 2 次提交
-
-
由 Michal Schmidt 提交于
Since implementing VLAN filtering in commit 05cc5a39 ("bnx2x: add vlan filtering offload") bnx2x refuses to add a VLAN while the interface is down: # ip link add link enp3s0f0 enp3s0f0_10 type vlan id 10 RTNETLINK answers: Bad address and in dmesg (with bnx2x.debug=0x20): bnx2x: [bnx2x_vlan_rx_add_vid:12941(enp3s0f0)]Ignoring VLAN configuration the interface is down Other drivers have no problem with this. Fix this peculiar behavior in the following way: - Accept requests to add/kill VID regardless of the device state. Maintain the requested list of VIDs in the bp->vlan_reg list. - If the device is up, try to configure the VID list into the hardware. If we run out of VLAN credits or encounter a failure configuring an entry, fall back to accepting all VLANs. If we successfully configure all entries from the list, turn the fallback off. - Use the same code for reconfiguring VLANs during NIC load. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marco Angaroni 提交于
Previous patch that introduced handling of outgoing packets in SIP persistent-engine did not call ip_vs_check_template() in case packet was matching a connection template. Assumption was that real-server was healthy, since it was sending a packet just in that moment. There are however real-server fault conditions requiring that association between call-id and real-server (represented by connection template) gets updated. Here is an example of the sequence of events: 1) RS1 is a back2back user agent that handled call-id1 and call-id2 2) RS1 is down and was marked as unavailable 3) new message from outside comes to IPVS with call-id1 4) IPVS reschedules the message to RS2, which becomes new call handler 5) RS2 forwards the message outside, translating call-id1 to call-id2 6) inside pe->conn_out() IPVS matches call-id2 with existing template 7) IPVS does not change association call-id2 <-> RS1 8) new message comes from client with call-id2 9) IPVS reschedules the message to a real-server potentially different from RS2, which is now the correct destination This patch introduces ip_vs_check_template() call in the handling of outgoing packets for SIP-pe. And also introduces a second optional argument for ip_vs_check_template() that allows to check if dest associated to a connection template is the same dest that was identified as the source of the packet. This is to change the real-server bound to a particular call-id independently from its availability status: the idea is that it's more reliable, for in->out direction (where internal network can be considered trusted), to always associate a call-id with the last real-server that used it in one of its messages. Think about above sequence of events where, just after step 5, RS1 returns instead to be available. Comparison of dests is done by simply comparing pointers to struct ip_vs_dest; there should be no cases where struct ip_vs_dest keeps its memory address, but represent a different real-server in terms of ip-address / port. Fixes: 39b97223 ("ipvs: handle connections started by real-servers") Signed-off-by: NMarco Angaroni <marcoangaroni@gmail.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 05 6月, 2016 1 次提交
-
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2016-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.7 brcmfmac * add fallback RSSI report for devices that do not report per-chain values * fix a null pointer derefence regression on PCIe full dongle devices rtlwifi * fix scheduling while atomic regression from commit 49f86ec2 MAINTAINERS * add file patterns for wireless device tree bindings ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2016 9 次提交
-
-
由 Geert Uytterhoeven 提交于
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 David S. Miller 提交于
John Crispin says: ==================== net-next: mediatek: improve phy support The current driver did not handle the RGMII delay modes and asymmetric flow control properly. The mii_bus is not freed properly. Also add support for fixed-phy allowing the driver to work on SoCs that have an internal gigabit switch. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Crispin 提交于
If an external Gigabit PHY is connected to either of the MACs we need to be able to tell the PHY to use a delay. Not doing so will result in heavy packet loss and/or data corruption when using PHYs such as the IC+ IP1001. We tell the PHY which MII delay mode to use via the devictree. The ethernet driver needs to be adapted to handle all 3 rgmii-*id modes in the same way as normal rgmii when setting up the MAC. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Crispin 提交于
The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1 needs to be configured using a fixed link speed and flow control settings. The easiest way to do this is to used the fixed-phy driver, allowing us to reuse the existing mdio polling code to setup the MAC. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Crispin 提交于
The current code will not setup the PHYs advertisement features correctly. Fix this and properly advertise Gigabit features and properly handle asymmetric pause frames. Signed-off-by: NSean Wang <keyhaede@gmail.com> Signed-off-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Crispin 提交于
The driver currently uses kfree() to clear the mii_bus. This is not the correct way to clear the memory and mdiobus_free() should be used instead. This patch fixes the two instances where this happens in the driver. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Khoronzhuk 提交于
The rx-usecs shouldn't be changed while interface down/up. Currently, for instance, if it's set to 100us, after interface down/up it's 500us. It's a hidden bug that can lead to lavish interrupt pacing time increasing while "down/up" up to max value. Steps to reproduce: - set rx-usecs to be 100us - down/up interface - read new unexpected rx-usecs Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yangbo Lu 提交于
When the transmit hardware timestamping is enabled, an additional TxBD would be added and would be set as the last TxBD with TXBD_LAST and TXBD_INTERRUPT. However this has been broken by a patch recently. This made the software couldn't get transmit hardware timestamps and resulted in call trace. So, this patch is to fix this issue. Fixes: 48963b44 ("gianfar: Remove redundant ops for do_tstamp from xmit()") Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-