提交 49f86ec2 编写于 作者: L Larry Finger 提交者: Kalle Valo

rtlwifi: Change long delays to sleeps

Routine rtl_addr_delay() uses delay statements in code that can
sleep. To improve system responsiveness, the various delay statements
are changed.

In addition, routines rtl_rfreg_delay() and rtl_bb_delay() are
rewritten to use the code in rtl_addr_delay() for most of their
input values.
Suggested-by: NByeoungwook Kim <quddnr145@gmail.com>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
上级 2f10e50e
......@@ -54,59 +54,39 @@ EXPORT_SYMBOL(channel5g_80m);
void rtl_addr_delay(u32 addr)
{
if (addr == 0xfe)
mdelay(50);
msleep(50);
else if (addr == 0xfd)
mdelay(5);
msleep(5);
else if (addr == 0xfc)
mdelay(1);
msleep(1);
else if (addr == 0xfb)
udelay(50);
usleep_range(50, 100);
else if (addr == 0xfa)
udelay(5);
usleep_range(5, 10);
else if (addr == 0xf9)
udelay(1);
usleep_range(1, 2);
}
EXPORT_SYMBOL(rtl_addr_delay);
void rtl_rfreg_delay(struct ieee80211_hw *hw, enum radio_path rfpath, u32 addr,
u32 mask, u32 data)
{
if (addr == 0xfe) {
mdelay(50);
} else if (addr == 0xfd) {
mdelay(5);
} else if (addr == 0xfc) {
mdelay(1);
} else if (addr == 0xfb) {
udelay(50);
} else if (addr == 0xfa) {
udelay(5);
} else if (addr == 0xf9) {
udelay(1);
if (addr >= 0xf9 && addr <= 0xfe) {
rtl_addr_delay(addr);
} else {
rtl_set_rfreg(hw, rfpath, addr, mask, data);
udelay(1);
usleep_range(1, 2);
}
}
EXPORT_SYMBOL(rtl_rfreg_delay);
void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data)
{
if (addr == 0xfe) {
mdelay(50);
} else if (addr == 0xfd) {
mdelay(5);
} else if (addr == 0xfc) {
mdelay(1);
} else if (addr == 0xfb) {
udelay(50);
} else if (addr == 0xfa) {
udelay(5);
} else if (addr == 0xf9) {
udelay(1);
if (addr >= 0xf9 && addr <= 0xfe) {
rtl_addr_delay(addr);
} else {
rtl_set_bbreg(hw, addr, MASKDWORD, data);
udelay(1);
usleep_range(1, 2);
}
}
EXPORT_SYMBOL(rtl_bb_delay);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册