Run AFLL BTC after upload pptable and before enabling
all smu features.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The latest SMU fw removes the limitation that required
UCLK >= DCEFCLK.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise there may be potential SMU performance issues.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The argument was set wrongly. Fast/slow switch was asked when there is
actually a slow/fast switch needed.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For vega20, there are two UVD rings which share one powerplay instance.
Under some case(two rings used parallel), the uvd dpm is disabled twice
which causes the SMC hang.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SOC voltage is not able to switch and forced to low 0.8V when running HEVC.
Thus the test failed.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set fclk ss as enabled on default.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

UVD, VCE and SOC clocks need to be taken into consideration. Also, the
thresholds need be updated correspondingly when stable power state is selected.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

UVD, VCE and Socclk also need to be taken into consideration when
setting PPSMC_MSG_SetSoftMinByFreq and PPSMC_MSG_SetSoftMaxByFreq.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add support for the new SMU firmware interface for clock adjustment.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The initialized overdrive settings are taken from vbios and SMU(
by PPSMC_MSG_TransferTableSmu2Dram).
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Powerplay uses 10KHz units.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix possible handshake hang and video playback crash

Corner cases:
 - Handshake between SMU and DCE causes hangs when CRTC is not
   enabled
 - System crash occurs when starting 4K playback with Movies and TV
   in an SLS configuration
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed for querying the stable pstate clocks.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. The min/max level is determined by soft_min_level/soft_max_level.
2. Vega20 comes with pptable v3 which has no vdd related
table(vdd_dep_on_socclk, vdd_dep_on_mclk) support.
3. Vega20 does not support separate fan feature control(enable or
disable).

v2: squash in fixes:
- bug fix for force dpm level settings
- fix wrong data type
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is essentially necessary when uvd/vce dpm is not enabled yet.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support the power profile API.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

hwmgr is the interface for the driver to setup state
structures which are used by the smu for managing the
power state.

v2: squash in fixes:
- update set_watermarks_for_clocks_ranges to use common code
- drop unsupported apis
- correct MAX_REGULAR_DPM_NUMBER value
- multimonitor fixes
- add check for vbios pptable version
- revise dpm table setup
- init fclk dpm state
- Remove unused definition in vega20_hwmgr
- support power limit setup
- enable vega20 to honour DAL clock limits
- comment out dump_table debugging
v3: switch to SOC15 register access macros
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Vega20 has a new activity monitor table that is stored in memory.  Add
API to get and set the new table.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The SMU manager handles the driver interaction with the SMU
which handles clock and voltage controls.

v2: switch to SOC15 register access macros
    reserve space for ActivityMonitor table
    enable SMU fw loading
    Drop dead code from bringup
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: squash in table size fixes
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: update to latest.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: cleanup
v3: fit the latest 40.6 smc fw
v4: update to latest.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: use thm 11.0.2 headers
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allow the user to disable AFVS via ppfeaturemask for debugging.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allow the user to disable AFVS via ppfeaturemask for debugging.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Compare the current vrefresh in addition to the number of displays
when determining whether or not the smu needs updates when changing
modes. The SMU needs to be updated if the vbi timeout changes due
to a different refresh rate.  Fixes flickering around mode changes
in some cases on polaris parts.
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Properly swap when reading from the vbios.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Properly swap when reading from the vbios.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

gfx off support in smu can be via powergate_gfx interface.
so remove the gfx_off_control interface.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

display can get clock info through this function.
implement this function for vega10 and old asics.
from vega12, there is no power state management,
so need to add new interface to notify display
the clock info
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when ACP block not enabled, we power off
acp block to save power.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Repeat enable dpm under pass-through because there is no actually
hardware-fini and real power-off when guest vm shutdown or reboot.
Otherwise, under pass-through it will be failed to populate populate
and upload SCLK MCLK DPM levels due to zero of pcie_speed_table.count.
Signed-off-by: NYintian Tao <yttao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the voltage showed in debugfs and hwmon should be in mV
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Only delete the dead temp variables in Polaris.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DIDTConfig_Polaris12[] table missed a big chunk of data.

Pointed by aidan.fabius <aidan.fabius@coreavi.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Otherwise there may be potential SMU performance issues.

v2: fix commit description and coding style
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rex.zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The argument was set wrongly. Fast/slow switch was asked when there is
actually a slow/fast switch needed.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rex.zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Slow switch for UCLK when there is multiple displays and they are
not in sync.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NRex Zhu <rex.zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

avoid the error in dmesg:
[drm:dm_pp_get_static_clocks]
*ERROR* DM_PPLIB: invalid powerlevel state: 0!
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>