- 03 3月, 2011 1 次提交
-
-
由 Don Skidmore 提交于
Updating the copyrights for 2011 as well as make the ixgbe_copyright string a constant. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 17 11月, 2010 2 次提交
-
-
由 Don Skidmore 提交于
Adds the new x540.c file and Aquantia 1202 PHY for X540 support. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
The new MAC type X540 shares much of the same functionality of some silicon specific functions. To reduce duplicate code, made these functions generic. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 01 7月, 2010 1 次提交
-
-
由 Don Skidmore 提交于
Add support for 1G SFP+ PHY's to 82599. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 5月, 2010 1 次提交
-
-
由 Mallikarjuna R Chilakala 提交于
This adds support for a new copper device for 82599, device id 0x151c. This 82599 10GBase-T device uses the PHY's internal temperature sensor to guard against over-temp conditions. In this scenario the PHY will be put in a low power mode and link will no longer be able to transmit or receive any data. When this occurs, the over-temp interrupt is latched and driver logs this error message. A HW reset or power cycle is required to clear this status. Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2010 1 次提交
-
-
由 Don Skidmore 提交于
This patch adds support of active DA cables. This is renaming and adding some PHY type enumerations. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2010 1 次提交
-
-
由 Shannon Nelson 提交于
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2009 1 次提交
-
-
由 Peter P Waskiewicz Jr 提交于
The SFF specification for Direct Attach cable detection has now been ratified. Previously, DA cable detect was looking at the Twinaxial bit in byte 9 of the SFP+ EEPROM. The spec now defines active and passive DA cables in byte 8 of the SFP+ EEPROM. This patch changes the cable detection for both 82598 and 82599 SFP+ adapters to conform to the new spec. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2009 1 次提交
-
-
由 PJ Waskiewicz 提交于
This patch does two things: 1) On 82599, the PHY is emedded in the MAC. On 82598, the SFP+ NIC has an external PHY. The reset in the SFP+ setup patch for 82598 is unnecessary on 82599, and adds extra dead time to device initialization. This removes that PHY reset for 82599 only. 2) On 82599, the SFP+ modules are multispeed fiber modules (10G/1G). We need to make sure to identify them properly for the remaining init sections to properly set them up. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 3月, 2009 1 次提交
-
-
由 PJ Waskiewicz 提交于
This patch adds the hardware initialization code specific to 82599. This is similar to the 82598 hardware initialization code. It also includes all changes to the existing hardware init code to support 82599. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2009 1 次提交
-
-
由 Peter P Waskiewicz Jr 提交于
New year, new copyright date ranges. Also bump the driver version number to reflect many of the recent changes. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 11月, 2008 1 次提交
-
-
由 Donald Skidmore 提交于
This patch adds support for SFP+ PHY in the following device ID's (10DB, 10F1, 10E1). These SFP+ PHY's are accessed via an I2C interface so the patch also includes functions to support this. Another feature of note is that the PHY is pluggable and some rearchitecting was needed to support this. Signed-off-by: NDonald Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2008 1 次提交
-
-
由 Jesse Brandeburg 提交于
Intel is currently shipping support for adapters with a phy that does 10GBase-T (copper), which is 10 Gigabit ethernet over standard Category 6 cabling. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 25 9月, 2008 2 次提交
-
-
由 Peter P Waskiewicz 提交于
This patch cleans up a bit of whitespace issues with the driver, updates the copyright information, and bumps the version number up. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
This is a massive update that includes infrastructure for further patches where we will add support for more phy types and eeprom types. This code is shared as much as possible with other drivers, so the code may seem a little obtuse at times but wherever possible we keep to the linux style and methods. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 29 1月, 2008 1 次提交
-
-
由 Auke Kok 提交于
While cleaning up the internal API focussing on Fiber and CX4 code we found that I had broken the copper PHY initialization code. This patch restores the PHY-specific code. This is mostly uninteresting since no copper PHY boards are yet available. The changes have been tested against Fiber only as I do not even have copper PHY versions of 82598 macs. This change actually cleans up the API code a bit more and we lose some initialization code. A few PHY link detection helper lines of code have been snuck into this patch, as well as a read flush where it was suspected that this might cause issues. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Auke Kok 提交于
This patch adds support for the Intel 82598 PCI-Express 10GbE chipset. Devices will be available on the market soon. This version of the driver is largely the same as the last release: * Driver uses a single RX and single TX queue, each using 1 MSI-X irq vector. * Driver runs in NAPI mode only * Driver is largely multiqueue-ready (TM) Changes since 20070803: * removed wrappers for hardware functions * incorporated e1000e-style HW api reorganization code * sparse/checkpatch cleanups, namespace cleanups * driver prints out extra debugging information at load time identifying adapter board number, mac, phy types * removed ixgbe_api.c, ixgbe_api.h, ixgbe_osdep.h * driver update to 1.1.18 * removed ixgbe.txt which contained no useful info anymore [ Integrated napi_struct changes from Auke as well... -DaveM ] Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NAyyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 9月, 2006 1 次提交
-
-
由 Auke Kok 提交于
This update to the copyright header adds the mailinglist, and aligns it with the kernel licensing as well as remove the offending 'all rights reserved'. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
-
- 17 8月, 2006 1 次提交
-
-
由 Manasi Deval 提交于
Signed-off-by: NManasi Deval <manasi.deval@intel.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
-
- 27 5月, 2006 1 次提交
-
-
由 Auke Kok 提交于
increase the year dates to 2006 and bump the version to 1.0.109-k2 Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
-
- 24 5月, 2006 1 次提交
-
-
由 Auke Kok 提交于
Add support for Copper 10GbE device ID 109E Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-