ixgbe: add MAC and PHY support for x540

Adds the new x540.c file and Aquantia 1202 PHY for X540 support.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ixgbe/Makefile

@@ -34,7 +34,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o
 
 ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
               ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
-              ixgbe_mbx.o
+              ixgbe_mbx.o ixgbe_x540.o
 
 ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
                               ixgbe_dcb_82599.o ixgbe_dcb_nl.o

drivers/net/ixgbe/ixgbe.h

@@ -481,10 +481,12 @@ struct ixgbe_rsc_cb {
 enum ixgbe_boards {
 	board_82598,
 	board_82599,
+	board_X540,
 };
 
 extern struct ixgbe_info ixgbe_82598_info;
 extern struct ixgbe_info ixgbe_82599_info;
+extern struct ixgbe_info ixgbe_X540_info;
 #ifdef CONFIG_IXGBE_DCB
 extern const struct dcbnl_rtnl_ops dcbnl_ops;
 extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,

drivers/net/ixgbe/ixgbe_82599.c

@@ -181,6 +181,10 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
 		phy->ops.get_firmware_version =
 		             &ixgbe_get_phy_firmware_version_tnx;
 		break;
+	case ixgbe_phy_aq:
+		phy->ops.get_firmware_version =
+			&ixgbe_get_phy_firmware_version_generic;
+		break;
 	default:
 		break;
 	}
@@ -298,7 +302,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 
 	/* Detect if there is a copper PHY attached. */
 	if (hw->phy.type == ixgbe_phy_cu_unknown ||
-	    hw->phy.type == ixgbe_phy_tn) {
+	    hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_aq) {
 		media_type = ixgbe_media_type_copper;
 		goto out;
 	}
@@ -1890,6 +1895,7 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 	hw->phy.ops.identify(hw);
 
 	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_aq ||
 	    hw->phy.type == ixgbe_phy_cu_unknown) {
 		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
 				     &ext_ability);

drivers/net/ixgbe/ixgbe_ethtool.c

@@ -214,6 +214,7 @@ static int ixgbe_get_settings(struct net_device *netdev,
 	/* Get PHY type */
 	switch (adapter->hw.phy.type) {
 	case ixgbe_phy_tn:
+	case ixgbe_phy_aq:
 	case ixgbe_phy_cu_unknown:
 		/* Copper 10G-BASET */
 		ecmd->port = PORT_TP;

drivers/net/ixgbe/ixgbe_main.c

@@ -59,6 +59,7 @@ static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
 static const struct ixgbe_info *ixgbe_info_tbl[] = {
 	[board_82598] = &ixgbe_82598_info,
 	[board_82599] = &ixgbe_82599_info,
+	[board_X540] = &ixgbe_X540_info,
 };
 
 /* ixgbe_pci_tbl - PCI Device ID Table

drivers/net/ixgbe/ixgbe_phy.c

@@ -115,6 +115,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 	case TN1010_PHY_ID:
 		phy_type = ixgbe_phy_tn;
 		break;
+	case AQ1202_PHY_ID:
+		phy_type = ixgbe_phy_aq;
+		break;
 	case QT2022_PHY_ID:
 		phy_type = ixgbe_phy_qt;
 		break;
@@ -433,8 +436,8 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
  * Determines the link capabilities by reading the AUTOC register.
  */
 s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
-                                                      ixgbe_link_speed *speed,
-                                                      bool *autoneg)
+                                               ixgbe_link_speed *speed,
+                                               bool *autoneg)
 {
 	s32 status = IXGBE_ERR_LINK_SETUP;
 	u16 speed_ability;
@@ -1410,6 +1413,22 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
 	return status;
 }
 
+/**
+ *  ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+**/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+                                           u16 *firmware_version)
+{
+	s32 status = 0;
+
+	status = hw->phy.ops.read_reg(hw, AQ_FW_REV, MDIO_MMD_VEND1,
+	                              firmware_version);
+
+	return status;
+}
+
 /**
  *  ixgbe_tn_check_overtemp - Checks if an overtemp occured.
  *  @hw: pointer to hardware structure

drivers/net/ixgbe/ixgbe_phy.h

@@ -106,6 +106,8 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
                              bool *link_up);
 s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
                                        u16 *firmware_version);
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+                                           u16 *firmware_version);
 
 s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
 s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);

drivers/net/ixgbe/ixgbe_type.h

@@ -995,8 +995,10 @@
 /* PHY IDs*/
 #define TN1010_PHY_ID    0x00A19410
 #define TNX_FW_REV       0xB
+#define AQ1202_PHY_ID    0x03A1B440
 #define QT2022_PHY_ID    0x0043A400
 #define ATH_PHY_ID       0x03429050
+#define AQ_FW_REV        0x20
 
 /* PHY Types */
 #define IXGBE_M88E1145_E_PHY_ID  0x01410CD0
@@ -1492,6 +1494,7 @@
 #define IXGBE_EEC_PRES      0x00000100 /* EEPROM Present */
 #define IXGBE_EEC_ARD       0x00000200 /* EEPROM Auto Read Done */
 #define IXGBE_EEC_FLUP      0x00800000 /* Flash update command */
+#define IXGBE_EEC_SEC1VAL   0x02000000 /* Sector 1 Valid */
 #define IXGBE_EEC_FLUDONE   0x04000000 /* Flash update done */
 /* EEPROM Addressing bits based on type (0-small, 1-large) */
 #define IXGBE_EEC_ADDR_SIZE 0x00000400
@@ -1506,7 +1509,9 @@
 #define IXGBE_EEPROM_SUM        0xBABA
 #define IXGBE_PCIE_ANALOG_PTR   0x03
 #define IXGBE_ATLAS0_CONFIG_PTR 0x04
+#define IXGBE_PHY_PTR           0x04
 #define IXGBE_ATLAS1_CONFIG_PTR 0x05
+#define IXGBE_OPTION_ROM_PTR    0x05
 #define IXGBE_PCIE_GENERAL_PTR  0x06
 #define IXGBE_PCIE_CONFIG0_PTR  0x07
 #define IXGBE_PCIE_CONFIG1_PTR  0x08
@@ -2173,6 +2178,7 @@ struct ixgbe_atr_input_masks {
 enum ixgbe_eeprom_type {
 	ixgbe_eeprom_uninitialized = 0,
 	ixgbe_eeprom_spi,
+	ixgbe_flash,
 	ixgbe_eeprom_none /* No NVM support */
 };
 
@@ -2180,12 +2186,14 @@ enum ixgbe_mac_type {
 	ixgbe_mac_unknown = 0,
 	ixgbe_mac_82598EB,
 	ixgbe_mac_82599EB,
+	ixgbe_mac_X540,
 	ixgbe_num_macs
 };
 
 enum ixgbe_phy_type {
 	ixgbe_phy_unknown = 0,
 	ixgbe_phy_tn,
+	ixgbe_phy_aq,
 	ixgbe_phy_cu_unknown,
 	ixgbe_phy_qt,
 	ixgbe_phy_xaui,
@@ -2584,6 +2592,7 @@ struct ixgbe_hw {
 	u16				subsystem_vendor_id;
 	u8				revision_id;
 	bool				adapter_stopped;
+	bool				force_full_reset;
 };
 
 struct ixgbe_info {