Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 17 9月, 2016 16 次提交
    • A
      samples/bpf: extend test_tunnel_bpf.sh with IPIP test · a1c82704
      由 Alexei Starovoitov 提交于 
      extend existing tests for vxlan, geneve, gre to include IPIP tunnel.
It tests both traditional tunnel configuration and
dynamic via bpf helpers.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a1c82704
    • A
      ip6_tunnel: add collect_md mode to IPv6 tunnels · 8d79266b
      由 Alexei Starovoitov 提交于 
      Similar to gre, vxlan, geneve tunnels allow IPIP6 and IP6IP6 tunnels
to operate in 'collect metadata' mode.
Unlike ipv4 code here it's possible to reuse ip6_tnl_xmit() function
for both collect_md and traditional tunnels.
bpf_skb_[gs]et_tunnel_key() helpers and ovs (in the future) are the users.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8d79266b
    • A
      ip_tunnel: add collect_md mode to IPIP tunnel · cfc7381b
      由 Alexei Starovoitov 提交于 
      Similar to gre, vxlan, geneve tunnels allow IPIP tunnels to
operate in 'collect metadata' mode.
bpf_skb_[gs]et_tunnel_key() helpers can make use of it right away.
ovs can use it as well in the future (once appropriate ovs-vport
abstractions and user apis are added).
Note that just like in other tunnels we cannot cache the dst,
since tunnel_info metadata can be different for every packet.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cfc7381b
    • J
      l2tp: constify net_device_ops structures · eb94737d
      由 Julia Lawall 提交于 
      Check for net_device_ops structures that are only stored in the netdev_ops
field of a net_device structure.  This field is declared const, so
net_device_ops structures that have this property can be declared as const
also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct net_device_ops i@p = { ... };

@ok@
identifier r.i;
struct net_device e;
position p;
@@
e.netdev_ops = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct net_device_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct net_device_ops i = { ... };
// </smpl>

The result of size on this file before the change is:
   text	      data     bss     dec         hex	  filename
   3401        931      44    4376        1118	net/l2tp/l2tp_eth.o

and after the change it is:
   text	     data        bss	    dec	    hex	filename
   3993       347         44       4384    1120	net/l2tp/l2tp_eth.o
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      eb94737d
    • J
      dwc_eth_qos: constify net_device_ops structures · 37307504
      由 Julia Lawall 提交于 
      Check for net_device_ops structures that are only stored in the netdev_ops
field of a net_device structure.  This field is declared const, so
net_device_ops structures that have this property can be declared as const
also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct net_device_ops i@p = { ... };

@ok@
identifier r.i;
struct net_device e;
position p;
@@
e.netdev_ops = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct net_device_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct net_device_ops i = { ... };
// </smpl>

The result of size on this file before the change is:
   text	      data     bss     dec         hex	  filename
  21623       1316      40   22979        59c3
   drivers/net/ethernet/synopsys/dwc_eth_qos.o

and after the change it is:
   text	     data        bss	    dec	    hex	filename
  22199       724         40      22963    59b3
   drivers/net/ethernet/synopsys/dwc_eth_qos.o
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      37307504
    • J
      hisilicon: constify net_device_ops structures · 66f58ec4
      由 Julia Lawall 提交于 
      Check for net_device_ops structures that are only stored in the netdev_ops
field of a net_device structure.  This field is declared const, so
net_device_ops structures that have this property can be declared as const
also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct net_device_ops i@p = { ... };

@ok@
identifier r.i;
struct net_device e;
position p;
@@
e.netdev_ops = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct net_device_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct net_device_ops i = { ... };
// </smpl>

The result of size on this file before the change is:

   text	      data     bss     dec         hex	  filename
   7995	       848       8    8851        2293
   drivers/net/ethernet/hisilicon/hip04_eth.o

and after the change it is:

   text	     data        bss	    dec	    hex	filename
   8571	      256          8       8835    2283
   drivers/net/ethernet/hisilicon/hip04_eth.o
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      66f58ec4
    • A
      llc: switch type to bool as the timeout is only tested versus 0 · 5ff904d5
      由 Alan Cox 提交于 
      (As asked by Dave in Februrary)
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5ff904d5
    • D
      net: l3mdev: Remove netif_index_is_l3_master · 19664c6a
      由 David Ahern 提交于 
      No longer used after e0d56fdd ("net: l3mdev: remove redundant calls")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      19664c6a
    • D
      net: vrf: Remove RT_FL_TOS · e1fb9d03
      由 David Ahern 提交于 
      No longer used after d66f6c0a ("net: ipv4: Remove l3mdev_get_saddr")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e1fb9d03
    • E
      tcp: prepare skbs for better sack shifting · 3613b3db
      由 Eric Dumazet 提交于 
      With large BDP TCP flows and lossy networks, it is very important
to keep a low number of skbs in the write queue.

RACK and SACK processing can perform a linear scan of it.

We should avoid putting any payload in skb->head, so that SACK
shifting can be done if needed.

With this patch, we allow to pack ~0.5 MB per skb instead of
the 64KB initially cooked at tcp_sendmsg() time.

This gives a reduction of number of skbs in write queue by eight.
tcp_rack_detect_loss() likes this.

We still allow payload in skb->head for first skb put in the queue,
to not impact RPC workloads.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3613b3db
    • D
      Merge tag 'wireless-drivers-next-for-davem-2016-09-15' of... · e812bd90
      由 David S. Miller 提交于 
      Merge tag 'wireless-drivers-next-for-davem-2016-09-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.9

Major changes:

iwlwifi

* preparation for new a000 HW continues
* some DQA improvements
* add support for GMAC
* add support for 9460, 9270 and 9170 series

mwifiex

* support random MAC address for scanning
* add HT aggregation support for adhoc mode
* add custom regulatory domain support
* add manufacturing mode support via nl80211 testmode interface

bcma

* support BCM53573 series of wireless SoCs

bitfield.h

* add FIELD_PREP() and FIELD_GET() macros

mt7601u

* convert to use the new bitfield.h macros

brcmfmac

* add support for bcm4339 chip with modalias sdio:c00v02D0d4339

ath10k

* add nl80211 testmode support for 10.4 firmware
* hide kernel addresses from logs using %pK format specifier
* implement NAPI support
* enable peer stats by default

ath9k

* use ieee80211_tx_status_noskb where possible

wil6210

* extract firmware capabilities from the firmware file

ath6kl

* enable firmware crash dumps on the AR6004

ath-current is also merged to fix a conflict in ath10k.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e812bd90
    • D
      Merge branch 'mlx5e-order-0' · 31b96621
      由 David S. Miller 提交于 
      Tariq Toukan says:

====================
mlx5e Order-0 pages for Striding RQ

In this series, we refactor our Striding RQ receive-flow to always use
fragmented WQEs (Work Queue Elements) using order-0 pages, omitting the
flow that allocates and splits high-order pages which would fragment
and deplete high-order pages in the system.

The first patch gives a slight degradation, but opens the opportunity
to using a simple page-cache mechanism of a fair size.
The page-cache, implemented in patch 3, not only closes the performance
gap but even gives a gain.
In patch 2 we re-organize the code to better manage the calls for
alloc/de-alloc pages in the RX flow.

Series generated against net-next commit:
bed806cb "Merge branch 'mlxsw-ethtool'"
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      31b96621
    • T
      net/mlx5e: Implement RX mapped page cache for page recycle · 4415a031
      由 Tariq Toukan 提交于 
      Instead of reallocating and mapping pages for RX data-path,
recycle already used pages in a per ring cache.

Performance tests:
The following results were measured on a freshly booted system,
giving optimal baseline performance, as high-order pages are yet to
be fragmented and depleted.

We ran pktgen single-stream benchmarks, with iptables-raw-drop:

Single stride, 64 bytes:
* 4,739,057 - baseline
* 4,749,550 - order0 no cache
* 4,786,899 - order0 with cache
1% gain

Larger packets, no page cross, 1024 bytes:
* 3,982,361 - baseline
* 3,845,682 - order0 no cache
* 4,127,852 - order0 with cache
3.7% gain

Larger packets, every 3rd packet crosses a page, 1500 bytes:
* 3,731,189 - baseline
* 3,579,414 - order0 no cache
* 3,931,708 - order0 with cache
5.4% gain
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4415a031
    • T
      net/mlx5e: Introduce API for RX mapped pages · a5a0c590
      由 Tariq Toukan 提交于 
      Manage the allocation and deallocation of mapped RX pages only
through dedicated API functions.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a5a0c590
    • T
      net/mlx5e: Single flow order-0 pages for Striding RQ · 7e426671
      由 Tariq Toukan 提交于 
      To improve the memory consumption scheme, we omit the flow that
demands and splits high-order pages in Striding RQ, and stay
with a single Striding RQ flow that uses order-0 pages.

Moving to fragmented memory allows the use of larger MPWQEs,
which reduces the number of UMR posts and filler CQEs.

Moving to a single flow allows several optimizations that improve
performance, especially in production servers where we would
anyway fallback to order-0 allocations:
- inline functions that were called via function pointers.
- improve the UMR post process.

This patch alone is expected to give a slight performance reduction.
However, the new memory scheme gives the possibility to use a page-cache
of a fair size, that doesn't inflate the memory footprint, which will
dramatically fix the reduction and even give a performance gain.

Performance tests:
The following results were measured on a freshly booted system,
giving optimal baseline performance, as high-order pages are yet to
be fragmented and depleted.

We ran pktgen single-stream benchmarks, with iptables-raw-drop:

Single stride, 64 bytes:
* 4,739,057 - baseline
* 4,749,550 - this patch
no reduction

Larger packets, no page cross, 1024 bytes:
* 3,982,361 - baseline
* 3,845,682 - this patch
3.5% reduction

Larger packets, every 3rd packet crosses a page, 1500 bytes:
* 3,731,189 - baseline
* 3,579,414 - this patch
4% reduction

Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)")
Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7e426671
    • D
      rxrpc: Make IPv6 support conditional on CONFIG_IPV6 · d1912747
      由 David Howells 提交于 
      Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it.
This is then made conditional on CONFIG_IPV6.

Without this, the following can be seen:

   net/built-in.o: In function `rxrpc_init_peer':
>> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags'
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d1912747
  3. 16 9月, 2016 24 次提交