- 17 12月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
When we insert an filter, the firmware checks that the given RX queue index is in range even if it will not be used. In case we're inserting a drop filter, pass the value 0. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
- 13 12月, 2013 39 次提交
-
-
由 Ben Hutchings 提交于
These were implemented by Andrew Jackson and Laurence Evans but not previously included in-tree. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Shradha Shah 提交于
The original names are unnecessarily alarming. Head-of-line blocking is not an emergency. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Andrew Rybchenko 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Andrew Rybchenko 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The operation can now fail, so change its return type to int. Remove the inline wrapper while we're changing the signature. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Currently a higher priority client can remove a lower priority client's filter with equal match-expression. This might happen if (a) the higher priority client has a double-free bug, or (b) another client with sufficient priority replaced and then removed an equal filter, allowing the low priority client to insert an equal filter. In neither case does it actually make sense to carry out the removal; we should say the filter doesn't exist, as the filter currently present is not the one that the high-priority client is referring to. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Change all the 'stack' naming to 'auto' (or other meaningful term); the device address list is based on more than just what the network stack wants, and the no-match filters aren't really what the stack wants at all. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
MAC filters inserted automatically by the driver, based on the device address list (EF10) or no-match filters (Siena), should be overridable at MANUAL or REQUIRED priority. Currently they themselves have REQUIRED priority and this requires some odd special-casing. We also can't reliably tell whether such a MAC filter has or has not been overridden. We just remember that it is wanted by the stack (RX_STACK flag). Add another priority level, AUTO, between HINT and MANUAL, and use this for the automatic filters while they have not been overridden. Remove the RX_STACK flag. Add an RX_OVER_AUTO flag which is set only when an AUTO filter has been overridden (or was requested to be inserted while a higher-priority filter existed). Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Andrew Rybchenko 提交于
The EF10 implementation already does this, and it makes more logical sense to group the RSS hash key and indirection table together. Rename the operation to rx_push_rss_config. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
In case of certain hardware and firmware errors it can be useful to have more context than just the file and line number. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
A freshly allocated skb starts with timestamps clear. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The SFC9100 family has only one clock per controller, shared by all functions. Therefore only create a clock device under the primary function, and make all other functions refer to the primary's clock device. Since PTP functionality is limited to port 0 and PF 0 on the earlier SFN[56]322F boards, and we also set the primary flag for that function, we can make the creation of a clock device conditional only on this flag. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The primary function of an EF10 controller will share its clock device with other functions in the same domain (which we call secondary functions). To this end, we need to associate functions on the same controller. We do not control probe order, so allow primary and secondary functions to appear in any order. Maintain global lists of all primary functions and of unassociated secondary functions, and a list of secondary functions on each primary function. Use the VPD serial number to tell whether functions are part of the same controller. VPD will not be readable by virtual functions, so this may need to be revisited later. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Original version by Stuart Hodgson. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
The EF10 firmware can optionally insert RX timestamps in the packet prefix. These only include the clock minor value. We must also enable periodic time sync events on each event queue which provide the high bits of the clock value. [bwh: Combined and rebased several changes. Added the above description and some sanity checks for inline vs separate timestamps. Changed efx_rx_skb_attach_timestamp() to read the packet prefix from the skb head area.] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
We can potentially pull the entire packet contents into the head area and then free the page it was in. In order to read an inline timestamp safely, we need to copy the prefix into the head area as well. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Daniel Pieczko 提交于
I added efx_ptp_get_mode() to avoid moving the definition for efx_ptp_data, since the current PTP mode is needed for siena.c:siena_set_ptp_hwtstamp. [bwh: Also move the rx_filters mask, and add kernel-doc] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Laurence Evans 提交于
The clock minor tick on the SFC9100 family is 2^-27 s, not 1 ns. There are also various pipeline delays which we need to correct for when interpreting timestamps. We query the firmware for the clock format and corrections at run-time. [bwh: Combined and rebased several changes] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Laurence Evans 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Laurence Evans 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
We'll be sharing clocks between multiple functions with their own MAC addresses. The name field is now documented as 'A short "friendly name" to identify the clock ...' and '... not meant to be a unique id.' So use the name 'sfc'. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
We need a dedicated channel on Siena to ensure we can match up the separate RX and timestamp events for each PTP packet. We won't do this for EF10 as timestamps are delivered inline. Pass a channel index of 0 to MC_CMD_PTP_OP_ENABLE when there is no dedicated channel. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The MC firmware will return error MC_CMD_ERR_ENOSPC if filter insertion fails due to lack of resources. The net driver's filter implementation for Falcon-architecture returns EBUSY. They should behave consistently, so for EF10 change ENOSPC to EBUSY. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
efx_flush_all() is a really misleading name - it has nothing to do with e.g. flushing DMA queues. Since it's called immediately after efx_stop_port() and is highly dependent on what that does, combine the two functions. Update comments to explain what this is doing a little better. Also update an related and erroneous comment in efx_start_port(). Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Edward Cree 提交于
Split each of efx_mcdi_rpc, efx_mcdi_rpc_finish, and efx_mcdi_rpc_async into a normal and a _quiet version; made the former log MCDI errors with netif_err (and include the raw MCDI error code), and the latter never log them at all. Changed various callers; any where some errors are expected (but others are not) call the _quiet version and then if necessary log the MCDI error themselves. Said logging is done by new efx_mcdi_display_error. Callers of efx_mcdi_rpc*_quiet functions which may want to log the error need to ensure that their outbuf is big enough to hold an MCDI error; to this end, they now use MCDI_DECLARE_BUF_OUT_OR_ERR, which always allocates at least 8 bytes. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Edward Cree 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Edward Cree 提交于
Add units to the "Sensor reports condition X for raw value Y" messages. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
We don't directly control RX ingress on Siena or any later controllers, and so we cannot prevent packets from entering the RX datapath while the RX queues are not set up. This results in the hardware incrementing RX_NODESC_DROP_CNT, but it's not an error and we should not include it in error stats. When bringing an interface up or down, pull (or wait for) stats and count the number of packets that were dropped while the interface was down. Subtract this from the reported RX dropped count. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
The addition of RX event merging support means we don't reliably detect dropped RX events now. Currently we will only detect them if the previous event for the RX queue had the CONT bit set. Only accept RX completion events as merged if the GET_CAPABILITIES_OUT_RX_BATCHING bit is set in datapath_caps (which it won't be for the low-latency datapath) and the CONT bit is not set on the event. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
To run BISTs the MC goes down in to a special mode where it will only respond to MCDI from the testing PF, and TX, RX and event queues are torn down. Other PFs get a message as it goes down to tell them it's going down. When the other PFs get this message, they check the soft status register to tell when the MC has rebooted after BIST mode and they can start recovery. [bwh: Convert the test result to 1 or -1 as for earlier NICs] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-