提交 74cd60a4 编写于 作者: J Jon Cooper 提交者: Ben Hutchings

sfc: Add MC BISTs to ethtool offline self test on EF10

To run BISTs the MC goes down in to a special mode where it will only
respond to MCDI from the testing PF, and TX, RX and event queues are
torn down. Other PFs get a message as it goes down to tell them it's
going down.

When the other PFs get this message, they check the soft status
register to tell when the MC has rebooted after BIST mode and they can
start recovery.

[bwh: Convert the test result to 1 or -1 as for earlier NICs]
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
上级 512bb06c
......@@ -14,6 +14,7 @@
#include "mcdi_pcol.h"
#include "nic.h"
#include "workarounds.h"
#include "selftest.h"
#include <linux/in.h>
#include <linux/jhash.h>
#include <linux/wait.h>
......@@ -3195,6 +3196,87 @@ static int efx_ef10_mac_reconfigure(struct efx_nic *efx)
return efx_mcdi_set_mac(efx);
}
static int efx_ef10_start_bist(struct efx_nic *efx, u32 bist_type)
{
MCDI_DECLARE_BUF(inbuf, MC_CMD_START_BIST_IN_LEN);
MCDI_SET_DWORD(inbuf, START_BIST_IN_TYPE, bist_type);
return efx_mcdi_rpc(efx, MC_CMD_START_BIST, inbuf, sizeof(inbuf),
NULL, 0, NULL);
}
/* MC BISTs follow a different poll mechanism to phy BISTs.
* The BIST is done in the poll handler on the MC, and the MCDI command
* will block until the BIST is done.
*/
static int efx_ef10_poll_bist(struct efx_nic *efx)
{
int rc;
MCDI_DECLARE_BUF(outbuf, MC_CMD_POLL_BIST_OUT_LEN);
size_t outlen;
u32 result;
rc = efx_mcdi_rpc(efx, MC_CMD_POLL_BIST, NULL, 0,
outbuf, sizeof(outbuf), &outlen);
if (rc != 0)
return rc;
if (outlen < MC_CMD_POLL_BIST_OUT_LEN)
return -EIO;
result = MCDI_DWORD(outbuf, POLL_BIST_OUT_RESULT);
switch (result) {
case MC_CMD_POLL_BIST_PASSED:
netif_dbg(efx, hw, efx->net_dev, "BIST passed.\n");
return 0;
case MC_CMD_POLL_BIST_TIMEOUT:
netif_err(efx, hw, efx->net_dev, "BIST timed out\n");
return -EIO;
case MC_CMD_POLL_BIST_FAILED:
netif_err(efx, hw, efx->net_dev, "BIST failed.\n");
return -EIO;
default:
netif_err(efx, hw, efx->net_dev,
"BIST returned unknown result %u", result);
return -EIO;
}
}
static int efx_ef10_run_bist(struct efx_nic *efx, u32 bist_type)
{
int rc;
netif_dbg(efx, drv, efx->net_dev, "starting BIST type %u\n", bist_type);
rc = efx_ef10_start_bist(efx, bist_type);
if (rc != 0)
return rc;
return efx_ef10_poll_bist(efx);
}
static int
efx_ef10_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
{
int rc, rc2;
efx_reset_down(efx, RESET_TYPE_WORLD);
rc = efx_mcdi_rpc(efx, MC_CMD_ENABLE_OFFLINE_BIST,
NULL, 0, NULL, 0, NULL);
if (rc != 0)
goto out;
tests->memory = efx_ef10_run_bist(efx, MC_CMD_MC_MEM_BIST) ? -1 : 1;
tests->registers = efx_ef10_run_bist(efx, MC_CMD_REG_BIST) ? -1 : 1;
rc = efx_mcdi_reset(efx, RESET_TYPE_WORLD);
out:
rc2 = efx_reset_up(efx, RESET_TYPE_WORLD, rc == 0);
return rc ? rc : rc2;
}
#ifdef CONFIG_SFC_MTD
struct efx_ef10_nvram_type_info {
......@@ -3345,7 +3427,7 @@ const struct efx_nic_type efx_hunt_a0_nic_type = {
.get_wol = efx_ef10_get_wol,
.set_wol = efx_ef10_set_wol,
.resume_wol = efx_port_dummy_op_void,
/* TODO: test_chip */
.test_chip = efx_ef10_test_chip,
.test_nvram = efx_mcdi_nvram_test_all,
.mcdi_request = efx_ef10_mcdi_request,
.mcdi_poll_response = efx_ef10_mcdi_poll_response,
......
......@@ -83,6 +83,7 @@ const char *const efx_reset_type_names[] = {
[RESET_TYPE_DMA_ERROR] = "DMA_ERROR",
[RESET_TYPE_TX_SKIP] = "TX_SKIP",
[RESET_TYPE_MC_FAILURE] = "MC_FAILURE",
[RESET_TYPE_MC_BIST] = "MC_BIST",
};
/* Reset workqueue. If any NIC has a hardware failure then a reset will be
......@@ -91,6 +92,12 @@ const char *const efx_reset_type_names[] = {
*/
static struct workqueue_struct *reset_workqueue;
/* How often and how many times to poll for a reset while waiting for a
* BIST that another function started to complete.
*/
#define BIST_WAIT_DELAY_MS 100
#define BIST_WAIT_DELAY_COUNT 100
/**************************************************************************
*
* Configurable values
......@@ -2389,6 +2396,24 @@ int efx_try_recovery(struct efx_nic *efx)
return 0;
}
static void efx_wait_for_bist_end(struct efx_nic *efx)
{
int i;
for (i = 0; i < BIST_WAIT_DELAY_COUNT; ++i) {
if (efx_mcdi_poll_reboot(efx))
goto out;
msleep(BIST_WAIT_DELAY_MS);
}
netif_err(efx, drv, efx->net_dev, "Warning: No MC reboot after BIST mode\n");
out:
/* Either way unset the BIST flag. If we found no reboot we probably
* won't recover, but we should try.
*/
efx->mc_bist_for_other_fn = false;
}
/* The worker thread exists so that code that cannot sleep can
* schedule a reset for later.
*/
......@@ -2401,6 +2426,9 @@ static void efx_reset_work(struct work_struct *data)
pending = ACCESS_ONCE(efx->reset_pending);
method = fls(pending) - 1;
if (method == RESET_TYPE_MC_BIST)
efx_wait_for_bist_end(efx);
if ((method == RESET_TYPE_RECOVER_OR_DISABLE ||
method == RESET_TYPE_RECOVER_OR_ALL) &&
efx_try_recovery(efx))
......@@ -2439,6 +2467,7 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
case RESET_TYPE_WORLD:
case RESET_TYPE_DISABLE:
case RESET_TYPE_RECOVER_OR_DISABLE:
case RESET_TYPE_MC_BIST:
method = type;
netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
RESET_TYPE(method));
......
......@@ -165,6 +165,7 @@ enum reset_type {
RESET_TYPE_DMA_ERROR,
RESET_TYPE_TX_SKIP,
RESET_TYPE_MC_FAILURE,
RESET_TYPE_MC_BIST,
RESET_TYPE_MAX,
};
......
......@@ -318,6 +318,8 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx,
"eventq.int", NULL);
}
efx_fill_test(n++, strings, data, &tests->memory,
"core", 0, "memory", NULL);
efx_fill_test(n++, strings, data, &tests->registers,
"core", 0, "registers", NULL);
......
......@@ -543,6 +543,9 @@ int efx_mcdi_rpc_start(struct efx_nic *efx, unsigned cmd,
if (rc)
return rc;
if (efx->mc_bist_for_other_fn)
return -ENETDOWN;
efx_mcdi_acquire_sync(mcdi);
efx_mcdi_send_request(efx, cmd, inbuf, inlen);
return 0;
......@@ -581,6 +584,9 @@ efx_mcdi_rpc_async(struct efx_nic *efx, unsigned int cmd,
if (rc)
return rc;
if (efx->mc_bist_for_other_fn)
return -ENETDOWN;
async = kmalloc(sizeof(*async) + ALIGN(max(inlen, outlen), 4),
GFP_ATOMIC);
if (!async)
......@@ -834,6 +840,30 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc)
spin_unlock(&mcdi->iface_lock);
}
/* The MC is going down in to BIST mode. set the BIST flag to block
* new MCDI, cancel any outstanding MCDI and and schedule a BIST-type reset
* (which doesn't actually execute a reset, it waits for the controlling
* function to reset it).
*/
static void efx_mcdi_ev_bist(struct efx_nic *efx)
{
struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
spin_lock(&mcdi->iface_lock);
efx->mc_bist_for_other_fn = true;
if (efx_mcdi_complete_sync(mcdi)) {
if (mcdi->mode == MCDI_MODE_EVENTS) {
mcdi->resprc = -EIO;
mcdi->resp_hdr_len = 0;
mcdi->resp_data_len = 0;
++mcdi->credits;
}
}
mcdi->new_epoch = true;
efx_schedule_reset(efx, RESET_TYPE_MC_BIST);
spin_unlock(&mcdi->iface_lock);
}
/* Called from falcon_process_eventq for MCDI events */
void efx_mcdi_process_event(struct efx_channel *channel,
efx_qword_t *event)
......@@ -875,6 +905,10 @@ void efx_mcdi_process_event(struct efx_channel *channel,
netif_info(efx, hw, efx->net_dev, "MC Reboot\n");
efx_mcdi_ev_death(efx, -EIO);
break;
case MCDI_EVENT_CODE_MC_BIST:
netif_info(efx, hw, efx->net_dev, "MC entered BIST mode\n");
efx_mcdi_ev_bist(efx);
break;
case MCDI_EVENT_CODE_MAC_STATS_DMA:
/* MAC stats are gather lazily. We can ignore this. */
break;
......
......@@ -852,6 +852,7 @@ struct efx_nic {
struct work_struct mac_work;
bool port_enabled;
bool mc_bist_for_other_fn;
bool port_initialized;
struct net_device *net_dev;
......
......@@ -722,7 +722,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests,
return rc_reset;
}
if ((tests->registers < 0) && !rc_test)
if ((tests->memory < 0 || tests->registers < 0) && !rc_test)
rc_test = -EIO;
}
......
......@@ -38,6 +38,7 @@ struct efx_self_tests {
int eventq_dma[EFX_MAX_CHANNELS];
int eventq_int[EFX_MAX_CHANNELS];
/* offline tests */
int memory;
int registers;
int phy_ext[EFX_MAX_PHY_TESTS];
struct efx_loopback_self_tests loopback[LOOPBACK_TEST_MAX + 1];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册