- 22 10月, 2007 9 次提交
-
-
由 Sheng Yang 提交于
Implement emulation of instruction: movnti m32/m64, r32/r64 opcode: 0x0f 0xc3 Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Eddie Dong 提交于
Resetting an SMP guest will force AP enter real mode (RESET) with paging enabled in protected mode. While current enter_rmode() can only handle mode switch from nonpaging mode to real mode which leads to SMP reboot failure. Fix by reloading the mmu context on entering real mode. Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: NQing He <qing.he@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This makes sure we handle NMI on the current cpu, and that we don't service maskable interrupts before non-maskable ones. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Izik Eidus 提交于
Setting shadow page table entry should be set atomicly using set_shadow_pte(). Signed-off-by: NIzik Eidus <izike@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
The repnz/repne instructions must set rep_prefix to 1 like rep/repe/repz. This patch correct the disk probe problem met with OpenBSD. This issue appears with commit e70669ab because before it, the decoding was done internally to kvm and after it is done by x86_emulate.c (which doesn't do it correctly). Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Nitin A Kamble 提交于
This code has gone to wrong place in the file. Moving it back to right location. Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: update boards files Blackfin arch: dma add some API and cleanup bf54x DMA definition Blackfin arch: cleanup and promote the general purpose timers api to a core blackfin component Blackfin arch: add a cheesy install target Blackfin arch: add functions for converting between sclks and usecs Blackfin arch: add assembly function for doing 64bit unsigned division Blackfin arch: -mno-fdpic works Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per discussion on lkml as the former uses less storage Blackfin arch: Fixing Bug: balance calls to get_task_mm with corresponding mmput calls Blackfin serial driver Kconfig: depend on DMA not being enabled rather than a specific DMA size Blackfin arch: Fix bug: missing CHIPID register field definition of BF54x Blackfin arch: Fix up /proc/cpuinfo so it is like everyone else Blackfin arch: Optimization - no need to make additional math here Blackfin arch: force irq_flags into the .data section Blackfin arch BF548 defconfig: enable watchdog by default Blackfin arch: add new processor ADSP-BF52x arch/mach support
-
- 21 10月, 2007 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b43' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] audit: watching subtrees [PATCH] new helper - inotify_evict_watch() [PATCH] new helper - inotify_clone_watch() [PATCH] new helpers - collect_mounts() and release_collected_mounts() [PATCH] pass dentry to audit_inode()/audit_inode_child()
-
由 Nick Piggin 提交于
This path mustn't have been tested :( I did attempt to exercise it by injecting failures here, but I suspect PageMappedToDisk may have been getting in the way. Will need more of a look, although I think nobh mode is OK for an -rc1 (it shouldn't eat anyone's data). Commit 03158cd7 ("fs: restore nobh") introcduced a NULL deref. Spotted by the Coverity checker. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 22 10月, 2007 1 次提交
-
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 21 10月, 2007 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 22 10月, 2007 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 21 10月, 2007 9 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Mike Frysinger 提交于
now that -mno-fdpic works, force it on so that we can use any blackfin toolchain to build up the kernel and kernel modules wrap -mno-fdpic in $(call cc-option,-mno-fdpic) so that older toolchains will still work Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Mike Frysinger 提交于
Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per discussion on lkml as the former uses less storage Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Bernd Schmidt 提交于
We must balance calls to get_task_mm with corresponding mmput calls, otherwise refcounting is screwed up and mms don't get freed when their task exits. Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Robin Getz 提交于
Fix up /proc/cpuinfo so it is like everyone else, and gets parsed by various applications properly. Still needs some tweaking on parts without full L1 sram, like 532, 531, so it doesn't print out L1 bank info that doesn't exist. Signed-off-by: NRobin Getz <robin.getz@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 22 10月, 2007 2 次提交
-
-
由 Mike Frysinger 提交于
force irq_flags into the .data section by initializing it to the hardware masks that cannot be disabled. this way if we use irq enable/disable functions before the .bss has been zeroed out (as does our l1 relocate/dma functions), we dont hit a problem where bss contains bogus crap. Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 21 10月, 2007 14 次提交
-
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
由 Al Viro 提交于
New kind of audit rule predicates: "object is visible in given subtree". The part that can be sanely implemented, that is. Limitations: * if you have hardlink from outside of tree, you'd better watch it too (or just watch the object itself, obviously) * if you mount something under a watched tree, tell audit that new chunk should be added to watched subtrees * if you umount something in a watched tree and it's still mounted elsewhere, you will get matches on events happening there. New command tells audit to recalculate the trees, trimming such sources of false positives. Note that it's _not_ about path - if something mounted in several places (multiple mount, bindings, different namespaces, etc.), the match does _not_ depend on which one we are using for access. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Kicks the watch out without dropping it. Called under ->inotify_mutex Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Get a snapshot of a subtree, creating private clones of vfsmounts for all its components and release such snapshot resp. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
makes caller simpler *and* allows to scan ancestors Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
* 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (29 commits) [PARISC] fix uninitialized variable warning in asm/rtc.h [PARISC] Port checkstack.pl to parisc [PARISC] Make palo target work when $obj != $src [PARISC] Zap unused variable warnings in pci.c [PARISC] Fix tests in palo target [PARISC] Fix palo target [PARISC] Restore palo target [PARISC] Attempt to clean up parisc/Makefile [PARISC] Fix infinite loop in /proc/iomem [PARISC] Quiet sysfs_create_link __must_check warnings in pdc_stable [PARISC] Squelch pci_enable_device __must_check warning in superio [PARISC] Kill off broken irqstack code [PARISC] Remove hardcoded uses of PAGE_SIZE [PARISC] Clean up pointless ASM_PAGE_SIZE_DIV use [PARISC] Kill off the last vestiges of ASM_PAGE_SIZE [PARISC] Kill off ASM_PAGE_SIZE use [PARISC] Beautify parisc vmlinux.lds.S [PARISC] Clean up a resource_size_t warning in sba_iommu [PARISC] Kill incorrect cast warning in unwinder [PARISC] Kill zone_to_nid printk warning ... Fixed trivial conflict in include/asm-parisc/tlbflush.h manually
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild由 Linus Torvalds 提交于
* ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: restore arch/{ppc/xtensa}/boot cflags kconfig: set title bar in xconfig kbuild: fix toplevel Makefile/depmod
-
由 Ingo Molnar 提交于
Add new maintainers for the x86 (32-bit and 64-bit) architecture. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Commit 7b96dc02 ("[SPARC] Videopix Frame Grabber: Convert device_lock_sem to mutex") missed one place. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Wrong order of arguments Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kyle McMartin 提交于
get_rtc_time, in the case that PDC returns that the battery is bad, returns an unmodified rtc_time arg to the caller, which then uses uninitialized values. Fix this by memset-ing the arg with zeroes, so it will at least be cleared if we return failure. Spotted by John David Anglin. Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Milton Miller 提交于
Commit 9a39e273 removed the boot directory addition to CFLAGS that was being used by the subdirectory builds. For the other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly sets that to empty as it is explicitly for a single directory only. Append to KBUILD_CFLAGS instead. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-