- 09 10月, 2012 2 次提交
-
-
由 Shaohua Li 提交于
The x86 implementation of atomic_dec_if_positive is quite generic, so make it available to all architectures. This is needed for "swap: add a simple detector for inappropriate swapin readahead". [akpm@linux-foundation.org: do the "#define foo foo" trick in the conventional manner] Signed-off-by: NShaohua Li <shli@fusionio.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Deacon 提交于
The core page allocator ensures that page flags are zeroed when freeing pages via free_pages_check. A number of architectures (ARM, PPC, MIPS) rely on this property to treat new pages as dirty with respect to the data cache and perform the appropriate flushing before mapping the pages into userspace. This can lead to cache synchronisation problems when using hugepages, since the allocator keeps its own pool of pages above the usual page allocator and does not reset the page flags when freeing a page into the pool. This patch adds a new architecture hook, arch_clear_hugepage_flags, so that architectures which rely on the page flags being in a particular state for fresh allocations can adjust the flags accordingly when a page is freed into the pool. Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: Michal Hocko <mhocko@suse.cz> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 10月, 2012 2 次提交
-
-
由 Denys Vlasenko 提交于
This is a preparatory patch for the introduction of NT_SIGINFO elf note. Make the location of compat_siginfo_t uniform across eight architectures which have it. Now it can be pulled in by including asm/compat.h or linux/compat.h. Most of the copies are verbatim. compat_uid[32]_t had to be replaced by __compat_uid[32]_t. compat_uptr_t had to be moved up before compat_siginfo_t in asm/compat.h on a several architectures (tile already had it moved up). compat_sigval_t had to be relocated from linux/compat.h to asm/compat.h. Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Amerigo Wang <amwang@redhat.com> Cc: "Jonathan M. Foote" <jmfoote@cert.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Pedro Alves <palves@redhat.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Takuya Yoshikawa 提交于
Needed to replace test_and_set_bit_le() in virt/kvm/kvm_main.c which is being used for this missing function. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 10月, 2012 1 次提交
-
-
由 Mark Brown 提交于
Ease the deployment of clkdev by providing a default asm/clkdev.h for use if the arch does not have an include/asm/clkdev.h. Due to limitations in Kbuild we manually add clkdev.h to all architectures that don't have one rather than having the header appear by default. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 03 10月, 2012 2 次提交
-
-
由 Catalin Marinas 提交于
This function is used by sparc, powerpc and arm64 for compat support. The patch adds a generic implementation which calls do_sendfile() directly and avoids set_fs(). The sparc architecture has wrappers for the sign extensions while powerpc relies on the compiler to do the this. The patch adds wrappers for powerpc to handle the u32->int type conversion. compat_sys_sendfile64() can be replaced by a sys_sendfile() call since compat_loff_t has the same size as off_t on a 64-bit system. On powerpc, the patch also changes the 64-bit sendfile call from sys_sendile64 to sys_sendfile. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Convert #include "..." to #include <path/...> in kernel system headers. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
- 27 9月, 2012 1 次提交
-
-
powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ On POWER7+ two new bits (mmcra[35] and mmcra[36]) indicate whether the contents of SIAR and SDAR are valid. For marked instructions on P7+, we must save the contents of SIAR and SDAR registers only if these new bits are set. This code/check for the SIAR-Valid bit is specific to P7+, so rather than waste a CPU-feature bit use the PVR flag. Note that Carl Love proposed a similar change for oprofile: https://lkml.org/lkml/2012/6/22/309Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 18 9月, 2012 5 次提交
-
-
由 Gavin Shan 提交于
The kernel crash was reported by Alexy. He was testing some feature with private kernel, in which Alexy added some code in pci_pm_reset() to read the CSR after writting it. The bug could be reproduced on Fiber Channel card (Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter (rev 03)) by the following commands. # echo 1 > /sys/devices/pci0004:01/0004:01:00.0/reset # rmmod lpfc # modprobe lpfc The history behind the test case is that those additional config space reading operations in pci_pm_reset() would cause EEH error, but we didn't detect EEH error until "modprobe lpfc". For the case, all the PCI devices on PCI bus (0004:01) were removed and added after PE reset. Then the EEH devices would be figured out again based on the OF nodes. Unfortunately, there were some child OF nodes under PCI device (0004:01:00.0), but they didn't have attached PCI_DN since they're invisible from PCI domain. However, we were still trying to convert OF node to EEH device without checking on the attached PCI_DN. Eventually, it caused the kernel crash as follows: Unable to handle kernel paging request for data at address 0x00000030 Faulting instruction address: 0xc00000000004d888 cpu 0x0: Vector: 300 (Data Access) at [c000000fc797b950] pc: c00000000004d888: .eeh_add_device_tree_early+0x78/0x140 lr: c00000000004d880: .eeh_add_device_tree_early+0x70/0x140 sp: c000000fc797bbd0 msr: 8000000000009032 dar: 30 dsisr: 40000000 current = 0xc000000fc78d9f70 paca = 0xc00000000edb0000 softe: 0 irq_happened: 0x00 pid = 2951, comm = eehd enter ? for help [c000000fc797bc50] c00000000004d848 .eeh_add_device_tree_early+0x38/0x140 [c000000fc797bcd0] c00000000004d848 .eeh_add_device_tree_early+0x38/0x140 [c000000fc797bd50] c000000000051b54 .pcibios_add_pci_devices+0x34/0x190 [c000000fc797bde0] c00000000004fb10 .eeh_reset_device+0x100/0x160 [c000000fc797be70] c0000000000502dc .eeh_handle_event+0x19c/0x300 [c000000fc797bf00] c000000000050570 .eeh_event_handler+0x130/0x1a0 [c000000fc797bf90] c000000000020138 .kernel_thread+0x54/0x70 The patch changes of_node_to_eeh_dev() and just returns NULL if the passed OF node doesn't have attached PCI_DN. Cc: stable@vger.kernel.org Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tiejun Chen 提交于
We need to add a new thread flag, TIF_EMULATE_STACK_STORE, for emulating stack store operation while exiting exception. Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Bharat Bhushan 提交于
__get_user64() and __put_user64() are not used. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Function eeh_rmv_from_parent_pe() could be called by the path of either normal PCI hotplug, or EEH recovery. For the former case, we need purge the corresponding PE on removal of the associated PE bus. The patch tries to cover that by passing more information to function pcibios_remove_pci_devices() so that we know if the corresponding PE needs to be purged or be marked as "invalid". Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
When EEH error happens on the PE whose PCI devices don't have attached drivers. In function eeh_handle_event(), the default value PCI_ERS_RESULT_NONE will be returned after iterating all drivers of those PCI devices belonging to the PE. Actually, we don't have installed drivers for the PCI devices. Under the circumstance, we will remove the corresponding PCI bus of the PE, including the associated EEH devices and PE instance. However, we still need the information stored in the PE instance to do PE reset after that. So it's unsafe to free the PE instance. The patch introduces EEH_PE_INVALID type PE to address the issue. When the PCI bus and the corresponding attached EEH devices are removed, we will mark the PE as EEH_PE_INVALID. At later point, the PE will be changed to EEH_PE_DEVICE or EEH_PE_BUS when the corresponding EEH devices are attached again. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 17 9月, 2012 9 次提交
-
-
由 Aneesh Kumar K.V 提交于
slice array size and slice mask size depend on PGTABLE_RANGE. Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
This update the proto-VSID and VSID scramble related information to be more generic by using names instead of current values. Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
Increase max addressable range to 64TB. This is not tested on real hardware yet. Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
With larger vsid we need to track more bits of ESID in slb cache for slb invalidate. Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
This patch makes the high psizes mask as an unsigned char array so that we can have more than 16TB. Currently we support upto 64TB Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
As we keep increasing PGTABLE_RANGE we need not increase the virual map area for kernel. Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Aneesh Kumar K.V 提交于
This patch convert different functions to take virtual page number instead of virtual address. Virtual page number is virtual address shifted right by VPN_SHIFT (12) bits. This enable us to have an address range of upto 76 bits. Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Scott Wood 提交于
PTRS_PER_PUD should be based on PUD_INDEX_SIZE, not PMD_INDEX_SIZE. We got away with it because PUD and PMD had the same index size, but this is no longer true with Aneesh's patchset to support a 46-bit user effective address space. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
On POWER6 and POWER7 if the input operand to an instruction is a denormalised single precision binary floating point value we can take a denormalisation exception where it's expected that the hypervisor (HV=1) will fix up the inputs before the instruction is run. This adds code to handle this denormalisation exception for POWER6 and POWER7. It also add a CONFIG_PPC_DENORMALISATION option and sets it in pseries/ppc64_defconfig. This is useful on bare metal systems only. Based on patch from Milton Miller. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 14 9月, 2012 1 次提交
-
-
由 Anatolij Gustschin 提交于
Currently fifo transfer is started when submitting a transfer request. Add posibility to defer the fifo transfer and start it later by calling additional function. This change is backward compatible, the behaviour of mpc52xx_lpbfifo_submit() is the same for previous driver users, so there is no need to adapt them. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
- 13 9月, 2012 7 次提交
-
-
由 Prabhakar Kushwaha 提交于
Freescale's Integrated Flash controller(IFC) v1.1.0 supports 40 bit address bus width. In case more than 32 bit address is used, the EXT registers should be set. Add support of ext registers. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Varun Sethi 提交于
All SOC device error interrupts are muxed and delivered to the core as a single MPIC error interrupt. Currently all the device drivers requiring access to device errors have to register for the MPIC error interrupt as a shared interrupt. With this patch we add interrupt demuxing capability in the mpic driver, allowing device drivers to register for their individual error interrupts. This is achieved by handling error interrupts in a cascaded fashion. MPIC error interrupt is handled by the "error_int_handler", which subsequently demuxes it using the EISR and delivers it to the respective drivers. The error interrupt capability is dependent on the MPIC EIMR register, which was introduced in FSL MPIC version 4.1 (P4080 rev2). So, error interrupt demuxing capability is dependent on the MPIC version and can be used for versions >= 4.1. Signed-off-by: NVarun Sethi <Varun.Sethi@freescale.com> Signed-off-by: NBogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jia Hongtao 提交于
Remove the dependency on PCI initialization for SWIOTLB initialization. So that PCI can be initialized at proper time. SWIOTLB is partly determined by PCI inbound/outbound map which is assigned in PCI initialization. But swiotlb_init() should be done at the stage of mem_init() which is much earlier than PCI initialization. So we reserve the memory for SWIOTLB first and free it if not necessary. All boards are converted to fit this change. Signed-off-by: NJia Hongtao <B38951@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Acked-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Zhao Chenhui 提交于
Add support to disable and re-enable individual cores at runtime on MPC85xx/QorIQ SMP machines. Currently support e500v1/e500v2 core. MPC85xx machines use ePAPR spin-table in boot page for CPU kick-off. This patch uses the boot page from bootloader to boot core at runtime. It supports 32-bit and 36-bit physical address. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJin Qing <b24347@freescale.com> Signed-off-by: NZhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Zhao Chenhui 提交于
Do hardware timebase sync. Firstly, stop all timebases, and transfer the timebase value of the boot core to the other core. Finally, start all timebases. Only apply to dual-core chips, such as MPC8572, P2020, etc. Signed-off-by: NZhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Zhao Chenhui 提交于
In the case of cpu hotplug, the cpu_state should be set to CPU_UP_PREPARE when kicking cpu. Otherwise, the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(), which makes the delay in generic_cpu_die() not happen. Signed-off-by: NZhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Varun Sethi 提交于
Previously, these interrupts would be mapped, but the offset calculation was broken, and only the first group was initialized. Signed-off-by: NVarun Sethi <Varun.Sethi@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 12 9月, 2012 1 次提交
-
-
由 Gavin Shan 提交于
This patch implements pcibios_window_alignment() so powerpc platforms can force P2P bridge windows to be at larger alignments than the PCI spec requires. [bhelgaas: changelog] Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 10 9月, 2012 9 次提交
-
-
由 Michael Neuling 提交于
These are no longer used so get rid of them Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Currently we mark the DABRX to interrupt on all matches (hypervisor/kernel/user and then filter in software. We can be a lot smarter now that we can set the DABRX dynamically. This sets the DABRX based on the flags passed by the user. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Rework set_dabr to take a DABRX value as well. Both the pseries and PS3 hypervisors do some checks on the DABRX values that are passed in the hcall. This patch stops bogus values from being passed to hypervisor. Also, in the case where we are clearing the breakpoint, where DABR and DABRX are zero, we modify the DABRX value to make it valid so that the hcall won't fail. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch does cleanup on EEH PCI address cache based on the fact EEH core is the only user of the component. * Cleanup on function names so that they all have prefix "eeh" and looks more short. * Function printk() has been replaced with pr_debug() or pr_warning() accordingly. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The idea comes from Benjamin Herrenschmidt. The eeh cache helps fetching the pci device according to the given I/O address. Since the eeh cache is serving for eeh, it's reasonable for eeh cache to trace eeh device except pci device. The patch make eeh cache to trace eeh device. Also, the major eeh entry function eeh_dn_check_failure has been renamed to eeh_dev_check_failure since it will take eeh device as input parameter. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
While EEH module is installed, PCI devices is checked one by one to see if it supports eeh. On different platforms, the PCI devices are referred through different ways when the EEH module is loaded. For example, on pSeries platform, that is done by OF node. However, we would do that by real PCI devices (struct pci_dev) on PowerNV platform in future. So we needs some mechanism to differentiate those cases by classifying them to probe modes, either from OF nodes or real PCI devices. The patch implements the support to eeh probe mode. Also, the EEH on pSeries has set it into EEH_PROBE_MODE_DEVTREE. That means the probe will be done based on OF nodes on pSeries platform. In addition, On pSeries platform, it's done by OF nodes. The patch moves the the probe function from EEH core to platform dependent backend and some cleanup applied. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch removes the eeh related statistics for eeh device since they have been maintained by the corresponding eeh PE. Also, the flags used to trace the state of eeh device and PE have been reworked for a little bit. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch reworks the current implementation so that the eeh errors will be handled basing on PE instead of eeh device. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch implements reset based on PE instead of eeh device. Also, The functions used to retrieve the reset type, either hot or fundamental reset, have been reworked for a little bit. More specificly, it's implemented based the the eeh device traverse function. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-