提交 9b3c76f0 编写于 作者: G Gavin Shan 提交者: Benjamin Herrenschmidt

powerpc/eeh: Handle EEH error based on PE

The patch reworks the current implementation so that the eeh errors
will be handled basing on PE instead of eeh device.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
上级 120dc496
......@@ -174,6 +174,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
void *eeh_pe_dev_traverse(struct eeh_pe *root,
eeh_traverse_func fn, void *flag);
void eeh_pe_restore_bars(struct eeh_pe *pe);
struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
void * __devinit eeh_dev_init(struct device_node *dn, void *data);
void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb);
......
......@@ -32,7 +32,7 @@ struct eeh_event {
};
int eeh_send_failure_event(struct eeh_pe *pe);
struct eeh_dev *handle_eeh_events(struct eeh_event *);
void eeh_handle_event(struct eeh_pe *pe);
#endif /* __KERNEL__ */
#endif /* ASM_POWERPC_EEH_EVENT_H */
......@@ -116,28 +116,35 @@ static void eeh_enable_irq(struct pci_dev *dev)
/**
* eeh_report_error - Report pci error to each device driver
* @dev: PCI device
* @data: eeh device
* @userdata: return value
*
* Report an EEH error to each device driver, collect up and
* merge the device driver responses. Cumulative response
* passed back in "userdata".
*/
static int eeh_report_error(struct pci_dev *dev, void *userdata)
static void *eeh_report_error(void *data, void *userdata)
{
struct eeh_dev *edev = (struct eeh_dev *)data;
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
/* We might not have the associated PCI device,
* then we should continue for next one.
*/
if (!dev) return NULL;
dev->error_state = pci_channel_io_frozen;
if (!driver)
return 0;
return NULL;
eeh_disable_irq(dev);
if (!driver->err_handler ||
!driver->err_handler->error_detected)
return 0;
return NULL;
rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen);
......@@ -145,27 +152,31 @@ static int eeh_report_error(struct pci_dev *dev, void *userdata)
if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
return 0;
return NULL;
}
/**
* eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled
* @dev: PCI device
* @data: eeh device
* @userdata: return value
*
* Tells each device driver that IO ports, MMIO and config space I/O
* are now enabled. Collects up and merges the device driver responses.
* Cumulative response passed back in "userdata".
*/
static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
static void *eeh_report_mmio_enabled(void *data, void *userdata)
{
struct eeh_dev *edev = (struct eeh_dev *)data;
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
struct pci_driver *driver;
if (!driver ||
if (!dev) return NULL;
if (!(driver = dev->driver) ||
!driver->err_handler ||
!driver->err_handler->mmio_enabled)
return 0;
return NULL;
rc = driver->err_handler->mmio_enabled(dev);
......@@ -173,12 +184,12 @@ static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
return 0;
return NULL;
}
/**
* eeh_report_reset - Tell device that slot has been reset
* @dev: PCI device
* @data: eeh device
* @userdata: return value
*
* This routine must be called while EEH tries to reset particular
......@@ -186,13 +197,15 @@ static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
* some actions, usually to save data the driver needs so that the
* driver can work again while the device is recovered.
*/
static int eeh_report_reset(struct pci_dev *dev, void *userdata)
static void *eeh_report_reset(void *data, void *userdata)
{
struct eeh_dev *edev = (struct eeh_dev *)data;
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
struct pci_driver *driver;
if (!driver)
return 0;
if (!dev || !(driver = dev->driver))
return NULL;
dev->error_state = pci_channel_io_normal;
......@@ -200,7 +213,7 @@ static int eeh_report_reset(struct pci_dev *dev, void *userdata)
if (!driver->err_handler ||
!driver->err_handler->slot_reset)
return 0;
return NULL;
rc = driver->err_handler->slot_reset(dev);
if ((*res == PCI_ERS_RESULT_NONE) ||
......@@ -208,82 +221,89 @@ static int eeh_report_reset(struct pci_dev *dev, void *userdata)
if (*res == PCI_ERS_RESULT_DISCONNECT &&
rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
return 0;
return NULL;
}
/**
* eeh_report_resume - Tell device to resume normal operations
* @dev: PCI device
* @data: eeh device
* @userdata: return value
*
* This routine must be called to notify the device driver that it
* could resume so that the device driver can do some initialization
* to make the recovered device work again.
*/
static int eeh_report_resume(struct pci_dev *dev, void *userdata)
static void *eeh_report_resume(void *data, void *userdata)
{
struct pci_driver *driver = dev->driver;
struct eeh_dev *edev = (struct eeh_dev *)data;
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
struct pci_driver *driver;
if (!dev) return NULL;
dev->error_state = pci_channel_io_normal;
if (!driver)
return 0;
if (!(driver = dev->driver))
return NULL;
eeh_enable_irq(dev);
if (!driver->err_handler ||
!driver->err_handler->resume)
return 0;
return NULL;
driver->err_handler->resume(dev);
return 0;
return NULL;
}
/**
* eeh_report_failure - Tell device driver that device is dead.
* @dev: PCI device
* @data: eeh device
* @userdata: return value
*
* This informs the device driver that the device is permanently
* dead, and that no further recovery attempts will be made on it.
*/
static int eeh_report_failure(struct pci_dev *dev, void *userdata)
static void *eeh_report_failure(void *data, void *userdata)
{
struct pci_driver *driver = dev->driver;
struct eeh_dev *edev = (struct eeh_dev *)data;
struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
struct pci_driver *driver;
if (!dev) return NULL;
dev->error_state = pci_channel_io_perm_failure;
if (!driver)
return 0;
if (!(driver = dev->driver))
return NULL;
eeh_disable_irq(dev);
if (!driver->err_handler ||
!driver->err_handler->error_detected)
return 0;
return NULL;
driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
return 0;
return NULL;
}
/**
* eeh_reset_device - Perform actual reset of a pci slot
* @edev: PE associated EEH device
* @pe: EEH PE
* @bus: PCI bus corresponding to the isolcated slot
*
* This routine must be called to do reset on the indicated PE.
* During the reset, udev might be invoked because those affected
* PCI devices will be removed and then added.
*/
static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
{
struct device_node *dn;
int cnt, rc;
/* pcibios will clear the counter; save the value */
cnt = edev->freeze_count;
cnt = pe->freeze_count;
if (bus)
pcibios_remove_pci_devices(bus);
......@@ -292,25 +312,13 @@ static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
* Reconfigure bridges and devices. Don't try to bring the system
* up if the reset failed for some reason.
*/
rc = eeh_reset_pe(edev);
rc = eeh_reset_pe(pe);
if (rc)
return rc;
/* Walk over all functions on this device. */
dn = eeh_dev_to_of_node(edev);
if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
dn = dn->parent->child;
while (dn) {
struct eeh_dev *pedev = of_node_to_eeh_dev(dn);
/* On Power4, always true because eeh_pe_config_addr=0 */
if (edev->pe_config_addr == pedev->pe_config_addr) {
eeh_ops->configure_bridge(dn);
eeh_restore_bars(pedev);
}
dn = dn->sibling;
}
/* Restore PE */
eeh_ops->configure_bridge(pe);
eeh_pe_restore_bars(pe);
/* Give the system 5 seconds to finish running the user-space
* hotplug shutdown scripts, e.g. ifdown for ethernet. Yes,
......@@ -322,7 +330,7 @@ static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
ssleep(5);
pcibios_add_pci_devices(bus);
}
edev->freeze_count = cnt;
pe->freeze_count = cnt;
return 0;
}
......@@ -334,7 +342,7 @@ static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
/**
* eeh_handle_event - Reset a PCI device after hard lockup.
* @event: EEH event
* @pe: EEH PE
*
* While PHB detects address or data parity errors on particular PCI
* slot, the associated PE will be frozen. Besides, DMA's occurring
......@@ -349,69 +357,24 @@ static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
* drivers (which cause a second set of hotplug events to go out to
* userspace).
*/
struct eeh_dev *handle_eeh_events(struct eeh_event *event)
void eeh_handle_event(struct eeh_pe *pe)
{
struct device_node *frozen_dn;
struct eeh_dev *frozen_edev;
struct pci_bus *frozen_bus;
int rc = 0;
enum pci_ers_result result = PCI_ERS_RESULT_NONE;
const char *location, *pci_str, *drv_str, *bus_pci_str, *bus_drv_str;
frozen_dn = eeh_find_device_pe(eeh_dev_to_of_node(event->edev));
if (!frozen_dn) {
location = of_get_property(eeh_dev_to_of_node(event->edev), "ibm,loc-code", NULL);
location = location ? location : "unknown";
printk(KERN_ERR "EEH: Error: Cannot find partition endpoint "
"for location=%s pci addr=%s\n",
location, eeh_pci_name(eeh_dev_to_pci_dev(event->edev)));
return NULL;
}
frozen_bus = pcibios_find_pci_bus(frozen_dn);
location = of_get_property(frozen_dn, "ibm,loc-code", NULL);
location = location ? location : "unknown";
/* There are two different styles for coming up with the PE.
* In the old style, it was the highest EEH-capable device
* which was always an EADS pci bridge. In the new style,
* there might not be any EADS bridges, and even when there are,
* the firmware marks them as "EEH incapable". So another
* two-step is needed to find the pci bus..
*/
if (!frozen_bus)
frozen_bus = pcibios_find_pci_bus(frozen_dn->parent);
frozen_bus = eeh_pe_bus_get(pe);
if (!frozen_bus) {
printk(KERN_ERR "EEH: Cannot find PCI bus "
"for location=%s dn=%s\n",
location, frozen_dn->full_name);
return NULL;
pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
__func__, pe->phb->global_number, pe->addr);
return;
}
frozen_edev = of_node_to_eeh_dev(frozen_dn);
frozen_edev->freeze_count++;
pci_str = eeh_pci_name(eeh_dev_to_pci_dev(event->edev));
drv_str = eeh_pcid_name(eeh_dev_to_pci_dev(event->edev));
if (frozen_edev->freeze_count > EEH_MAX_ALLOWED_FREEZES)
pe->freeze_count++;
if (pe->freeze_count > EEH_MAX_ALLOWED_FREEZES)
goto excess_failures;
printk(KERN_WARNING
"EEH: This PCI device has failed %d times in the last hour:\n",
frozen_edev->freeze_count);
if (frozen_edev->pdev) {
bus_pci_str = pci_name(frozen_edev->pdev);
bus_drv_str = eeh_pcid_name(frozen_edev->pdev);
printk(KERN_WARNING
"EEH: Bus location=%s driver=%s pci addr=%s\n",
location, bus_drv_str, bus_pci_str);
}
printk(KERN_WARNING
"EEH: Device location=%s driver=%s pci addr=%s\n",
location, drv_str, pci_str);
pr_warning("EEH: This PCI device has failed %d times in the last hour\n",
pe->freeze_count);
/* Walk the various device drivers attached to this slot through
* a reset sequence, giving each an opportunity to do what it needs
......@@ -419,12 +382,12 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
* status ... if any child can't handle the reset, then the entire
* slot is dlpar removed and added.
*/
pci_walk_bus(frozen_bus, eeh_report_error, &result);
eeh_pe_dev_traverse(pe, eeh_report_error, &result);
/* Get the current PCI slot state. This can take a long time,
* sometimes over 3 seconds for certain systems.
*/
rc = eeh_ops->wait_state(eeh_dev_to_of_node(frozen_edev), MAX_WAIT_FOR_RECOVERY*1000);
rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
printk(KERN_WARNING "EEH: Permanent failure\n");
goto hard_fail;
......@@ -434,14 +397,14 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
* don't post the error log until after all dev drivers
* have been informed.
*/
eeh_slot_error_detail(frozen_edev, EEH_LOG_TEMP);
eeh_slot_error_detail(pe, EEH_LOG_TEMP);
/* If all device drivers were EEH-unaware, then shut
* down all of the device drivers, and hope they
* go down willingly, without panicing the system.
*/
if (result == PCI_ERS_RESULT_NONE) {
rc = eeh_reset_device(frozen_edev, frozen_bus);
rc = eeh_reset_device(pe, frozen_bus);
if (rc) {
printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc);
goto hard_fail;
......@@ -450,7 +413,7 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
/* If all devices reported they can proceed, then re-enable MMIO */
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
rc = eeh_pci_enable(frozen_edev, EEH_OPT_THAW_MMIO);
rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
if (rc < 0)
goto hard_fail;
......@@ -458,13 +421,13 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
result = PCI_ERS_RESULT_NEED_RESET;
} else {
result = PCI_ERS_RESULT_NONE;
pci_walk_bus(frozen_bus, eeh_report_mmio_enabled, &result);
eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result);
}
}
/* If all devices reported they can proceed, then re-enable DMA */
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
rc = eeh_pci_enable(frozen_edev, EEH_OPT_THAW_DMA);
rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA);
if (rc < 0)
goto hard_fail;
......@@ -482,13 +445,13 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
/* If any device called out for a reset, then reset the slot */
if (result == PCI_ERS_RESULT_NEED_RESET) {
rc = eeh_reset_device(frozen_edev, NULL);
rc = eeh_reset_device(pe, NULL);
if (rc) {
printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc);
goto hard_fail;
}
result = PCI_ERS_RESULT_NONE;
pci_walk_bus(frozen_bus, eeh_report_reset, &result);
eeh_pe_dev_traverse(pe, eeh_report_reset, &result);
}
/* All devices should claim they have recovered by now. */
......@@ -499,9 +462,9 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
}
/* Tell all device drivers that they can resume operations */
pci_walk_bus(frozen_bus, eeh_report_resume, NULL);
eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
return frozen_edev;
return;
excess_failures:
/*
......@@ -509,30 +472,26 @@ struct eeh_dev *handle_eeh_events(struct eeh_event *event)
* are due to poorly seated PCI cards. Only 10% or so are
* due to actual, failed cards.
*/
printk(KERN_ERR
"EEH: PCI device at location=%s driver=%s pci addr=%s\n"
"has failed %d times in the last hour "
"and has been permanently disabled.\n"
"Please try reseating this device or replacing it.\n",
location, drv_str, pci_str, frozen_edev->freeze_count);
pr_err("EEH: PHB#%d-PE#%x has failed %d times in the\n"
"last hour and has been permanently disabled.\n"
"Please try reseating or replacing it.\n",
pe->phb->global_number, pe->addr,
pe->freeze_count);
goto perm_error;
hard_fail:
printk(KERN_ERR
"EEH: Unable to recover from failure of PCI device "
"at location=%s driver=%s pci addr=%s\n"
"Please try reseating this device or replacing it.\n",
location, drv_str, pci_str);
pr_err("EEH: Unable to recover from failure from PHB#%d-PE#%x.\n"
"Please try reseating or replacing it\n",
pe->phb->global_number, pe->addr);
perm_error:
eeh_slot_error_detail(frozen_edev, EEH_LOG_PERM);
eeh_slot_error_detail(pe, EEH_LOG_PERM);
/* Notify all devices that they're about to go down. */
pci_walk_bus(frozen_bus, eeh_report_failure, NULL);
eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
/* Shut down the device drivers for good. */
pcibios_remove_pci_devices(frozen_bus);
return NULL;
if (frozen_bus)
pcibios_remove_pci_devices(frozen_bus);
}
......@@ -82,7 +82,7 @@ static int eeh_event_handler(void * dummy)
pe->phb->global_number, pe->addr);
set_current_state(TASK_INTERRUPTIBLE); /* Don't add to load average */
handle_eeh_events(event);
eeh_handle_event(pe);
eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
kfree(event);
......
......@@ -561,3 +561,31 @@ void eeh_pe_restore_bars(struct eeh_pe *pe)
{
eeh_pe_dev_traverse(pe, eeh_restore_one_device_bars, NULL);
}
/**
* eeh_pe_bus_get - Retrieve PCI bus according to the given PE
* @pe: EEH PE
*
* Retrieve the PCI bus according to the given PE. Basically,
* there're 3 types of PEs: PHB/Bus/Device. For PHB PE, the
* primary PCI bus will be retrieved. The parent bus will be
* returned for BUS PE. However, we don't have associated PCI
* bus for DEVICE PE.
*/
struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
{
struct pci_bus *bus = NULL;
struct eeh_dev *edev;
struct pci_dev *pdev;
if (pe->type == EEH_PE_PHB) {
bus = pe->phb->bus;
} else if (pe->type == EEH_PE_BUS) {
edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
pdev = eeh_dev_to_pci_dev(edev);
if (pdev)
bus = pdev->bus;
}
return bus;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册