This patch allows you to include the conntrack information together
with the packet that is sent to user-space via NFQUEUE.

Previously, there was no integration between ctnetlink and
nfnetlink_queue. If you wanted to access conntrack information
from your libnetfilter_queue program, you required to query
ctnetlink from user-space to obtain it. Thus, delaying the packet
processing even more.

Including the conntrack information is optional, you can set it
via NFQA_CFG_F_CONNTRACK flag with the new NFQA_CFG_FLAGS attribute.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch uses the new variable length conntrack extensions.

Instead of using union nf_conntrack_help that contain all the
helper private data information, we allocate variable length
area to store the private helper data.

This patch includes the modification of all existing helpers.
It also includes a couple of include header to avoid compilation
warnings.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

We can now define conntrack extensions of variable size. This
patch is useful to get rid of these unions:

union nf_conntrack_help
union nf_conntrack_proto
union nf_conntrack_nat_help
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch modifies the struct nf_conntrack_helper to allocate
the room for the helper name. The maximum length is 16 bytes
(this was already introduced in 2.6.24).

For the maximum length for expectation policy names, I have
also selected 16 bytes.

This patch is required by the follow-up patch to support
user-space connection tracking helpers.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Routing of 127/8 is tradtionally forbidden, we consider
packets from that address block martian when routing and do
not process corresponding ARP requests.

This is a sane default but renders a huge address space
practically unuseable.

The RFC states that no address within the 127/8 block should
ever appear on any network anywhere but it does not forbid
the use of such addresses outside of the loopback device in
particular. For example to address a pool of virtual guests
behind a load balancer.

This patch adds a new interface option 'route_localnet'
enabling routing of the 127/8 address block and processing
of ARP requests on a specific interface.

Note that for the feature to work, the default local route
covering 127/8 dev lo needs to be removed.

Example:
  $ sysctl -w net.ipv4.conf.eth0.route_localnet=1
  $ ip route del 127.0.0.0/8 dev lo table local
  $ ip addr add 127.1.0.1/16 dev eth0
  $ ip route flush cache

V2: Fix invalid check to auto flush cache (thanks davem)
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Use a more current logging style.

Add pr_fmt and missing newlines.
Remove embedded prefixes.
Neaten phy_print_status to avoid using KERN_CONT.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This small patch removes access to the last element of the spkt_device
array through a constant. Instead, it is accessed by sizeof() to respect
possible changes in if_packet.h.
Signed-off-by: NDaniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If no peer actually gets attached (either because create is zero or
the peer allocation fails) we'll trigger a BUG because we
unconditionally do an rt{,6}_peer_ptr() afterwards.

Fix this by guarding it with the proper check.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the compilation of the TCP and UDP trackers with sysctl
compilation disabled:

net/netfilter/nf_conntrack_proto_udp.c: In function ‘udp_init_net_data’:
net/netfilter/nf_conntrack_proto_udp.c:279:13: error: ‘struct nf_proto_net’ has no member named
 ‘user’
net/netfilter/nf_conntrack_proto_tcp.c:1606:9: error: ‘struct nf_proto_net’ has no member named
 ‘user’
net/netfilter/nf_conntrack_proto_tcp.c:1643:9: error: ‘struct nf_proto_net’ has no member named
 ‘user’
Reported-by: NFengguang Wu <wfg@linux.intel.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__dev_get_by_name() is slow because pm_qos_req has been inserted between
name[] and name_hlist, adding cache misses.

pm_qos_req has nothing to do at the beginning of struct net_device
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

14e4:432c is found on some bcm63xx devices. The device is working fine
with b43.
Reported-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

MSI is enabled by default for most of the 4th generation
chips. Add this for AR9462 - this fixes PowerSave operation,
the chip was not entering Network-Sleep mode earlier.
With proper powering down of the MAC now, power consumption
in associated state is reduced considerably.
Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Currently 4 channels are scanned per scan command. if scan request
is issued by user during Tx traffic, radio will be out of channel
for "4 * per_chan_scan_time" for each scan command and will not be
able to receive Rx packets. This adds delay in data traffic. We can
minimize it by reducing number of channels scanned per scan command
in this scenario.

We can not always scan 1 channel per scan command due to limitation
of number of command buffers. So we add code to decide number of
channels scanned per scan command in associated state.
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

If scan operation is started when Tx traffic is already running,
driver locks Tx queue until it gets completed. With this logic
there is a delay for Tx packets.

This patch implements new approach to give Tx path higher priority
in this case. Driver internally sends multiple synchronous scan
commands to firmware when scan is requested by user. Now we will
make sure that Tx queue is empty everytime before sending next scan
command. If Tx queue isn't empty scan command will be postponsed by
20msec. This rule will be followed until Tx queue becomes empty or
timeout of 1 second happens. In case of timeout scan operation will
be aborted.
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Currently the scan time per channel for active scanning is set to
200ms. It takes quite a while to finsh scanning on all channels,
especially with a dual band configuration.

Change the per channel scan time settings to the following values:

passive scan: 110ms
active scan: 30ms
specific scan: 30ms

Above settings have been tested on x86 and arm platforms.
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-eeprom.c

We handle NULL in rt{,6}_set_peer but then our caller will try to pass
that NULL pointer into inet_putpeer() which isn't ready for it.

Fix this by moving the NULL check one level up, and then remove the
now unnecessary NULL check from inetpeer_ptr_set_peer().
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This implementation can deal with having many inetpeer roots, which is
a necessary prerequisite for per-FIB table rooted peer tables.

Each family (AF_INET, AF_INET6) has a sequence number which we bump
when we get a family invalidation request.

Each peer lookup cheaply checks whether the flush sequence of the
root we are using is out of date, and if so flushes it and updates
the sequence number.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is zero point to this function.

It's only real substance is to perform an extremely outdated BSD4.2
ICMP check, which we can safely remove.  If you really have a MTU
limited link being routed by a BSD4.2 derived system, here's a nickel
go buy yourself a real router.

The other actions of ip_rt_frag_needed(), checking and conditionally
updating the peer, are done by the per-protocol handlers of the ICMP
event.

TCP, UDP, et al. have a handler which will receive this event and
transmit it back into the associated route via dst_ops->update_pmtu().

This simplification is important, because it eliminates the one place
where we do not have a proper route context in which to make an
inetpeer lookup.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We encode the pointer(s) into an unsigned long with one state bit.

The state bit is used so we can store the inetpeer tree root to use
when resolving the peer later.

Later the peer roots will be per-FIB table, and this change works to
facilitate that.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise we reference potentially non-existing members when
ipv6 is disabled.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As pointed out by Michael Tokarev , struct unix_iter_state is no longer
needed.
Suggested-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We only need one interface for this operation, since we always know
which inetpeer root we want to flush.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of net/ipv4/inetpeer.c
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since it's guarenteed that we will access the inetpeer if we're trying
to do timewait recycling and TCP options were enabled on the
connection, just cache the peer in the timewait socket.

In the future, inetpeer lookups will be context dependent (per routing
realm), and this helps facilitate that as well.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The get_peer method TCP uses is full of special cases that make no
sense accommodating, and it also gets in the way of doing more
reasonable things here.

First of all, if the socket doesn't have a usable cached route, there
is no sense in trying to optimize timewait recycling.

Likewise for the case where we have IP options, such as SRR enabled,
that make the IP header destination address (and thus the destination
address of the route key) differ from that of the connection's
destination address.

Just return a NULL peer in these cases, and thus we're also able to
get rid of the clumsy inetpeer release logic.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's a lot of places that open-code rt{,6}_get_peer() only because
they want to set 'create' to one.  So add an rt{,6}_get_peer_create()
for their sake.

There were also a few spots open-coding plain rt{,6}_get_peer() and
those are transformed here as well.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

/proc/net/unix has quadratic behavior, and can hold unix_table_lock for
a while if high number of unix sockets are alive. (90 ms for 200k
sockets...)

We already have a hash table, so its quite easy to use it.

Problem is unbound sockets are still hashed in a single hash slot
(unix_socket_table[UNIX_HASH_TABLE])

This patch also spreads unbound sockets to 256 hash slots, to speedup
both /proc/net/unix and unix_diag.

Time to read /proc/net/unix with 200k unix sockets :
(time dd if=/proc/net/unix of=/dev/null bs=4k)

before : 520 secs
after : 2 secs
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

add struct net as a parameter of inet_getpeer_v[4,6],
use net to replace &init_net.

and modify some places to provide net for inet_getpeer_v[4,6]
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

now inetpeer doesn't support namespace,the information will
be leaking across namespace.

this patch move the global vars v4_peers and v6_peers to
netns_ipv4 and netns_ipv6 as a field peers.

add struct pernet_operations inetpeer_ops to initial pernet
inetpeer data.

and change family_to_base and inet_getpeer to support namespace.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  CC      drivers/net/wireless/ti/wl18xx/main.o
drivers/net/wireless/ti/wl18xx/main.c: In function ‘wl18xx_conf_init’:
drivers/net/wireless/ti/wl18xx/main.c:1024:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘long unsigned int’ [-Wformat]
drivers/net/wireless/ti/wl18xx/main.c:1024:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ [-Wformat]
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Don't spew errors when we can't find the NVS file in wlcore. Instead
fail the wl12xx boot HW op if the NVS isn't found.

Take this opportunity to remove some dead code from register_hw()
which looks for the NVS again needlessly.
Signed-off-by: NArik Nemtsov <arik@wizery.com>
Signed-off-by: NLuciano Coelho <coelho@ti.com>

Give all wl18xx phy module paramters -1 as a default value, indicating
the paramter was not set. Add previous default values to the default
18xx priv conf structure.

Remove the board_type field from wl18xx priv. The field with the same
name inside the phy conf is good enough for our purposes.
Signed-off-by: NArik Nemtsov <arik@wizery.com>
Signed-off-by: NLuciano Coelho <coelho@ti.com>