The scoping of the validity of the mapping is thus clarified.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The only time where an atomic mapping is required is during
error-capture and there we cannot use the default slot, but need to
specifically use one of the IRQ slots. So separate out the two
conditions and use the atomic mapping only when appropriate.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just makes sure that writes are not being aliased by the CPU cache and
do make it out to main memory.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=24977
Cc: stable@kernel.org

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

... take advantage of the new implicit request issuing of
i915_wait_request.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

One caller (for the pageflip support) wants a purely pipelined flush.
Distinguish this case by a new parameter. This will also be useful
later on for pipelined fencing.

v2: Simplify the code by depending upon the implicit request emitting
of i915_wait_request.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
[ickle: And drop the non-interruptible support in the process.]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

By moving one i915_add_request we can solely depend on the new
auto-seqno-numbering behaviour.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

i915_gem_object_move_to_active can handle zero seqno for us now.
And not emitting a request is not fatal here - we'll try to emit
a new one if we have to wait for some rendering to complete.

In case this assumption ever gets accidentally broken, there's already
a BUG_ON to catch it in i915_do_wait_request.

So just silently ignore ENOMEM here instead of screwing up the whole
drm.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

... instead of threading flush_domains through the execbuf code to
i915_add_request.

With this change 2 small cleanups are possible (likewise the majority
of the patch):

- The flush_domains parameter of i915_add_request is always 0. Drop it
  and the corresponding logic.
- Ditto for the seqno param of i915_gem_process_flushing_list.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Previously I thought that one interrupt per batchbuffer should be
enough. Now tedious benchmarking showed this to be wrong.

Therefore track whether any commands have been isssued with a future
seqno (like pipelined fencing changes or flushes). If this is the case
emit a request before issueing the batchbuffer.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Now that we can move objects to the active list without already having
emitted a request, move the flushing list handling into i915_gem_flush.
This makes more sense and allows to drop a few i915_add_request calls
that are not strictly necessary.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Sometimes (like when flushing in preparation of batchbuffer execution)
we know that we'll emit a request but haven't yet done so. Allow this
case by simply taking the next seqno by default. Ensure that a request
is eventually emitted before waiting for an request by issuing it
in i915_wait_request iff this is not yet done.

Also replace one open-coded version of i915_gem_object_wait_rendering,
to prevent future code-diversion.

Chris Wilson asked me to explain and clarify what this patch does and why.
Here it goes:

Old way of moving objects onto the active list and associating them with a
reques:

1. i915_add_request + store the returned seqno somewhere
2. i915_gem_object_move_to_active (with the stored seqno as parameter)

For the current users, this is all fine. But I'd like to associate objects
(and fence regs) with the batchbuffer request deep down in the execbuf
call-chain. I thought about three ways of implementing this.

a) Don't care, just emit request when we need a new seqno. When heavily
pipelining fence reg changes, this would have caused tons of superflous
request (and corresponding irqs).

b) Thread all changed fences, objects, whatever through the execbuf-maze,
so that when we emit a request, we can store the new seqno at all the right
places.

c) Kill that seqno-threading-around business by simply storing the next
seqno, i.e. allow 2. to be done before 1. in the above sequence.

I've decided to implement c) (in this patch). The following patches are
just fall-out that resulted from this small conceptual change.

* We can handle the flushing list processing where we actually emit a flush
  (i915_gem_flush and i915_retire_commands) instead of in i915_add_request.
  The code makes IMHO more sense this way (and i915_add_request looses the
  flush_domains parameter, obviously).

* We can avoid emitting unnecessary requests. IMHO there's no point in
  emitting more than one request per batchbuffer (with or without an
  corresponding irq).

* By enforcing 2. before 1. ordering in the above sequence the seqno
  argument of i915_gem_object_move_to_active is redundant and can be
  dropped.

v2: Now i915_wait_request issues request if it is not yet emitted.
Also introduce i915_gem_next_request_seqno(dev) just in case we ever
need to do some prep work before using a new seqno.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
[ickle: Keep i915_gem_object_set_to_display_plane() uninterruptible.]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Useful for capturing register read/write traces to send to the hw guys.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Store the pixel-multiplier on the adjusted mode and avoid modifying the
requested mode.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Instead of sleeping for an arbitrary length of time (the documentation
fails to specify how long to wait for) wait until the load detection has
changed state (or at most the 20ms as before).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

With the extra intel_wait_for_vblank added in commit
9d0498a2 periodic stalls were being
triggered (which were detected by i915_hangcheck_elapsed). Partially
revert this change for now.
Signed-off-by: NSitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Fix a minor confusion between intel_page_flip_finish(pipe) and
intel_page_flip_finish_plane(plane) -- should have no effect as
currently we map pipe 0 to plane 0 (and pipe 1 to plane 1).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

My Samsung N210 has a VBT with DEVICE_TYPE_INT_LFP with a zero
addin-offset. With the check in place, the panel was declared absent.

v2: Only trust BIOS writers that have graduated to writing OpRegions.
(We are all doomed.)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Adam Jackson <ajax@redhat.com>
Reviewed-by: NAdam Jackson <ajax@redhat.com>

It is recommended that we use the Video BIOS tables that were copied
into the OpRegion during POST when initialising the driver. This saves
us from having to furtle around inside the ROM ourselves and possibly
allows the vBIOS to adjust the tables prior to initialisation.

On some systems, such as the Samsung N210, there is no accessible VBIOS
and the only means of finding the VBT is through the OpRegion.

v2: Rearrange the code so that ASLE is enabled along with ACPI
v3: Enable OpRegion parsing even without ACPI
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>

It's part of the generic Intel driver infrastructure so rename it in
prepreparation for using it for VBT.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

If we don't flush the write then we can not be sure that the border
colour will have taken effect by the time we try to read it back.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

wait_for() uses msleep() to yield the cpu whilst spinning waiting for a
register to change. kdb asserts that mode changes are atomic and so
prohibits msleep. The alternative would be to use mdelay or to simply
probe the register more often instead of busy waiting.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Jesse's feedback from using the wait_for() macro was that the msleep
argument was that it was superfluous and made the macro more difficult
to use and to read. As the actually amount of time to sleep is not
critical, the crucial part is to sleep and let the processor schedule
something else whilst we wait for the event, replace the argument with a
hardcoded value.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

ums-gem code correctly cancels the retire work (at lastclose time),
kms does not do so. Fix this by canceling the work right after ideling
the gpu.

While staring at the code I noticed that the work function is not
static. Fix this, too.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

When the module unloads, all users should be gone, hence all bo references
held by userspace, too. This should already result in an idle ringbuffer.
Still, be paranoid and idle gem before starting the unload dance.

Also kill the call to i915_gem_lastclose under an if (kms), it's a noop
for kms.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Kill any outstanding unpin_work when destroying the corresponding
crtc. Then flush the workqueue before the gem teardown, in case
any unpin work is still outstanding.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

idle_work wasn't cleaned up at all. It takes &dev->struct_mutex, but
accesss the mode_config crtc list (without any other locking!). Hence
this work needs to be canceled before calling drm_mode_config_cleanup.

As evidenced by the kernel's object debuggin code, the current code
also cleans up the timer to early (it gets rearmed). So move it right
before the final cleanup (it seems to work).

Also unconditionally set up the idle_timer in intel_increase_pllclock.
If we're unlucky the timer might fire right away, rendering the call
in the modesetting teardown pointless.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

With kms, interrupts now get disabled in the modesetting cleanup. So
free the error state afterwards, it currently gets allocated in
the interrupt handler.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>