提交 6c9547ff 编写于 作者: C Chris Wilson

drm/i915/sdvo: Preserve pixel-multiplier

Store the pixel-multiplier on the adjusted mode and avoid modifying the
requested mode.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
上级 57cd6508
......@@ -3519,7 +3519,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
int trans_dpll_sel = (pipe == 0) ? 0 : 1;
int lvds_reg = LVDS;
u32 temp;
int sdvo_pixel_multiply;
int target_clock;
drm_vblank_pre_modeset(dev, pipe);
......@@ -3770,12 +3769,14 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
else
dpll |= DPLLB_MODE_DAC_SERIAL;
if (is_sdvo) {
int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
if (pixel_multiplier > 1) {
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
else if (HAS_PCH_SPLIT(dev))
dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
dpll |= DPLL_DVO_HIGH_SPEED;
sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
else if (HAS_PCH_SPLIT(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
if (is_dp)
dpll |= DPLL_DVO_HIGH_SPEED;
......@@ -3982,9 +3983,15 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) {
if (is_sdvo) {
sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
if (pixel_multiplier > 1)
pixel_multiplier = (pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
else
pixel_multiplier = 0;
I915_WRITE(dpll_md_reg,
(0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
pixel_multiplier);
} else
I915_WRITE(dpll_md_reg, 0);
} else {
......
......@@ -99,6 +99,24 @@
#define INTEL_DVO_CHIP_TMDS 2
#define INTEL_DVO_CHIP_TVOUT 4
/* drm_display_mode->private_flags */
#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
static inline void
intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
int multiplier)
{
mode->clock *= multiplier;
mode->private_flags |= multiplier;
}
static inline int
intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
{
return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
}
struct intel_i2c_chan {
struct drm_device *drm_dev; /* for getting at dev. private (mmio etc.) */
u32 reg; /* GPIO reg */
......
......@@ -106,15 +106,11 @@ struct intel_sdvo {
bool is_hdmi;
/**
* This is set if we detect output of sdvo device as LVDS.
* This is set if we detect output of sdvo device as LVDS and
* have a valid fixed mode to use with the panel.
*/
bool is_lvds;
/**
* This is sdvo flags for input timing.
*/
uint8_t sdvo_flags;
/**
* This is sdvo fixed pannel mode pointer
*/
......@@ -132,6 +128,8 @@ struct intel_sdvo {
/* Mac mini hack -- use the same DDC as the analog connector */
struct i2c_adapter *analog_ddc_bus;
/* Input timings for adjusted_mode */
struct intel_sdvo_dtd input_dtd;
};
struct intel_sdvo_connector {
......@@ -1022,8 +1020,6 @@ intel_sdvo_set_input_timings_for_mode(struct intel_sdvo *intel_sdvo,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct intel_sdvo_dtd input_dtd;
/* Reset the input timing to the screen. Assume always input 0. */
if (!intel_sdvo_set_target_input(intel_sdvo))
return false;
......@@ -1035,14 +1031,12 @@ intel_sdvo_set_input_timings_for_mode(struct intel_sdvo *intel_sdvo,
return false;
if (!intel_sdvo_get_preferred_input_timing(intel_sdvo,
&input_dtd))
&intel_sdvo->input_dtd))
return false;
intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
intel_sdvo->sdvo_flags = input_dtd.part2.sdvo_flags;
intel_sdvo_get_mode_from_dtd(adjusted_mode, &intel_sdvo->input_dtd);
drm_mode_set_crtcinfo(adjusted_mode, 0);
mode->clock = adjusted_mode->clock;
return true;
}
......@@ -1051,6 +1045,7 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
struct intel_sdvo *intel_sdvo = enc_to_intel_sdvo(encoder);
int multiplier;
/* We need to construct preferred input timings based on our
* output timings. To do that, we have to set the output
......@@ -1065,10 +1060,8 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
mode,
adjusted_mode);
} else if (intel_sdvo->is_lvds) {
drm_mode_set_crtcinfo(intel_sdvo->sdvo_lvds_fixed_mode, 0);
if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
intel_sdvo->sdvo_lvds_fixed_mode))
intel_sdvo->sdvo_lvds_fixed_mode))
return false;
(void) intel_sdvo_set_input_timings_for_mode(intel_sdvo,
......@@ -1077,9 +1070,10 @@ static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
}
/* Make the CRTC code factor in the SDVO pixel multiplier. The
* SDVO device will be told of the multiplier during mode_set.
* SDVO device will factor out the multiplier during mode_set.
*/
adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
multiplier = intel_sdvo_get_pixel_multiplier(adjusted_mode);
intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
return true;
}
......@@ -1093,10 +1087,11 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_sdvo *intel_sdvo = enc_to_intel_sdvo(encoder);
u32 sdvox = 0;
int sdvo_pixel_multiply, rate;
u32 sdvox;
struct intel_sdvo_in_out_map in_out;
struct intel_sdvo_dtd input_dtd;
int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
int rate;
if (!mode)
return;
......@@ -1114,28 +1109,23 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
SDVO_CMD_SET_IN_OUT_MAP,
&in_out, sizeof(in_out));
if (intel_sdvo->is_hdmi) {
if (!intel_sdvo_set_avi_infoframe(intel_sdvo, mode))
return;
sdvox |= SDVO_AUDIO_ENABLE;
}
/* Set the output timings to the screen */
if (!intel_sdvo_set_target_output(intel_sdvo,
intel_sdvo->attached_output))
return;
/* We have tried to get input timing in mode_fixup, and filled into
adjusted_mode */
intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
if (intel_sdvo->is_tv || intel_sdvo->is_lvds)
input_dtd.part2.sdvo_flags = intel_sdvo->sdvo_flags;
/* If it's a TV, we already set the output timing in mode_fixup.
* Otherwise, the output timing is equal to the input timing.
* adjusted_mode.
*/
if (!intel_sdvo->is_tv && !intel_sdvo->is_lvds) {
if (intel_sdvo->is_tv || intel_sdvo->is_lvds) {
input_dtd = intel_sdvo->input_dtd;
} else {
/* Set the output timing to the screen */
if (!intel_sdvo_set_target_output(intel_sdvo,
intel_sdvo->attached_output))
return;
intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
(void) intel_sdvo_set_output_timing(intel_sdvo, &input_dtd);
}
......@@ -1143,31 +1133,18 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
if (!intel_sdvo_set_target_input(intel_sdvo))
return;
if (intel_sdvo->is_tv) {
if (!intel_sdvo_set_tv_format(intel_sdvo))
return;
}
if (intel_sdvo->is_hdmi &&
!intel_sdvo_set_avi_infoframe(intel_sdvo, mode))
return;
/* We would like to use intel_sdvo_create_preferred_input_timing() to
* provide the device with a timing it can support, if it supports that
* feature. However, presumably we would need to adjust the CRTC to
* output the preferred timing, and we don't support that currently.
*/
#if 0
success = intel_sdvo_create_preferred_input_timing(encoder, clock,
width, height);
if (success) {
struct intel_sdvo_dtd *input_dtd;
if (intel_sdvo->is_tv &&
!intel_sdvo_set_tv_format(intel_sdvo))
return;
intel_sdvo_get_preferred_input_timing(encoder, &input_dtd);
intel_sdvo_set_input_timing(encoder, &input_dtd);
}
#else
(void) intel_sdvo_set_input_timing(intel_sdvo, &input_dtd);
#endif
sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode);
switch (sdvo_pixel_multiply) {
switch (pixel_multiplier) {
default:
case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
case 4: rate = SDVO_CLOCK_RATE_MULT_4X; break;
......@@ -1177,13 +1154,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
/* Set the SDVO control regs. */
if (IS_I965G(dev)) {
sdvox |= SDVO_BORDER_ENABLE;
sdvox = SDVO_BORDER_ENABLE;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
sdvox |= SDVO_VSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
sdvox |= SDVO_HSYNC_ACTIVE_HIGH;
} else {
sdvox |= I915_READ(intel_sdvo->sdvo_reg);
sdvox = I915_READ(intel_sdvo->sdvo_reg);
switch (intel_sdvo->sdvo_reg) {
case SDVOB:
sdvox &= SDVOB_PRESERVE_MASK;
......@@ -1196,16 +1173,18 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
}
if (intel_crtc->pipe == 1)
sdvox |= SDVO_PIPE_B_SELECT;
if (intel_sdvo->is_hdmi)
sdvox |= SDVO_AUDIO_ENABLE;
if (IS_I965G(dev)) {
/* done in crtc_mode_set as the dpll_md reg must be written early */
} else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
/* done in crtc_mode_set as it lives inside the dpll register */
} else {
sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT;
sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT;
}
if (intel_sdvo->sdvo_flags & SDVO_NEED_TO_STALL)
if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL)
sdvox |= SDVO_STALL_SELECT;
intel_sdvo_write_sdvox(intel_sdvo, sdvox);
}
......@@ -1692,6 +1671,10 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
intel_sdvo->sdvo_lvds_fixed_mode =
drm_mode_duplicate(connector->dev, newmode);
drm_mode_set_crtcinfo(intel_sdvo->sdvo_lvds_fixed_mode,
0);
intel_sdvo->is_lvds = true;
break;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册