blkiocg_reset_stats() implements stat reset for blkio.reset_stats
cgroupfs file.  This feature is very unconventional and something
which shouldn't have been merged.  It's only useful when there's only
one user or tool looking at the stats.  As soon as multiple users
and/or tools are involved, it becomes useless as resetting disrupts
other usages.  There are very good reasons why all other stats expect
readers to read values at the start and end of a period and subtract
to determine delta over the period.

The implementation is rather complex - some fields shouldn't be
cleared and it saves some fields, resets whole and restores for some
reason.  Reset of percpu stats is also racy.  The comment points to
64bit store atomicity for the reason but even without that stores for
zero can simply race with other CPUs doing RMW and get clobbered.

Simplify reset by

* Clear selectively instead of resetting and restoring.

* Grouping debug stat fields to be reset and using memset() over them.

* Not caring about stats_lock.

* Using memset() to reset percpu stats.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With recent plug merge updates, merged stats are no longer called for
plug merges and now only updated while holding queue_lock.  As
stats_lock is scheduled to be removed, there's no reason to use percpu
for merged stats.  Don't use percpu for merged stats.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Current per cpu stat allocation assumes GFP_KERNEL allocation flag. But in
IO path there are times when we want GFP_NOIO semantics. As there is no
way to pass the allocation flags to alloc_percpu(), this patch delays the
allocation of stats using a worker thread.

v2-> tejun suggested following changes. Changed the patch accordingly.
	- move alloc_node location in structure
	- reduce the size of names of some of the fields
	- Reduce the scope of locking of alloc_list_lock
	- Simplified stat_alloc_fn() by allocating stats for all
	  policies in one go and then assigning these to a group.

v3 -> Andrew suggested to put some comments in the code. Also raised
      concerns about trying to allocate infinitely in case of allocation
      failure. I have changed the logic to sleep for 10ms before retrying.
      That should take care of non-preemptible UP kernels.

v4 -> Tejun had more suggestions.
	- drop list_for_each_entry_all()
	- instead of msleep() use queue_delayed_work()
	- Some cleanups realted to more compact coding.

v5-> tejun suggested more cleanups leading to more compact code.

tj: - Relocated pcpu_stats into blkio_stat_alloc_fn().
    - Minor comment update.
    - This also fixes suspicious RCU usage warning caused by invoking
      cgroup_path() from blkg_alloc() without holding RCU read lock.
      Now that blkg_alloc() doesn't require sleepable context, RCU
      read lock from blkg_lookup_create() is maintained throughout
      blkg_alloc().
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make blk-throttle call bio_associate_current() on bios being delayed
such that they get issued to block layer with the original io_context.
This allows stacking blk-throttle and cfq-iosched propio policies.
bios will always be issued with the correct ioc and blkcg whether it
gets delayed by blk-throttle or not.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Implement bio_blkio_cgroup() which returns the blkcg associated with
the bio if exists or %current's blkcg, and use it in blk-throttle and
cfq-iosched propio.  This makes both cgroup policies honor task
association for the bio instead of always assuming %current.

As nobody is using bio_set_task() yet, this doesn't introduce any
behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

IO scheduling and cgroup are tied to the issuing task via io_context
and cgroup of %current.  Unfortunately, there are cases where IOs need
to be routed via a different task which makes scheduling and cgroup
limit enforcement applied completely incorrectly.

For example, all bios delayed by blk-throttle end up being issued by a
delayed work item and get assigned the io_context of the worker task
which happens to serve the work item and dumped to the default block
cgroup.  This is double confusing as bios which aren't delayed end up
in the correct cgroup and makes using blk-throttle and cfq propio
together impossible.

Any code which punts IO issuing to another task is affected which is
getting more and more common (e.g. btrfs).  As both io_context and
cgroup are firmly tied to task including userland visible APIs to
manipulate them, it makes a lot of sense to match up tasks to bios.

This patch implements bio_associate_current() which associates the
specified bio with %current.  The bio will record the associated ioc
and blkcg at that point and block layer will use the recorded ones
regardless of which task actually ends up issuing the bio.  bio
release puts the associated ioc and blkcg.

It grabs and remembers ioc and blkcg instead of the task itself
because task may already be dead by the time the bio is issued making
ioc and blkcg inaccessible and those are all block layer cares about.

elevator_set_req_fn() is updated such that the bio elvdata is being
allocated for is available to the elevator.

This doesn't update block cgroup policies yet.  Further patches will
implement the support.

-v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in
     rq_ioc() to fix build breakage.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kent Overstreet <koverstreet@google.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently ioc->nr_tasks is used to decide two things - whether an ioc
is done issuing IOs and whether it's shared by multiple tasks.  This
patch separate out the first into ioc->active_ref, which is acquired
and released using {get|put}_io_context_active() respectively.

This will be used to associate bio's with a given task.  This patch
doesn't introduce any visible behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

ioc_task_link() is used to share %current's ioc on clone.  If
%current->io_context is set, %current is guaranteed to have refcount
on the ioc and, thus, ioc_task_link() can't fail.

Replace error checking in ioc_task_link() with WARN_ON_ONCE() and make
it just increment refcount and nr_tasks.

-v2: Description typo fix (Vivek).
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make the following interface updates to prepare for future ioc related
changes.

* create_io_context() returning ioc only works for %current because it
  doesn't increment ref on the ioc.  Drop @task parameter from it and
  always assume %current.

* Make create_io_context_slowpath() return 0 or -errno and rename it
  to create_task_io_context().

* Make ioc_create_icq() take @ioc as parameter instead of assuming
  that of %current.  The caller, get_request(), is updated to create
  ioc explicitly and then pass it into ioc_create_icq().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

get_request() is structured a bit unusually in that failure path is
inlined in the usual flow with goto labels atop and inside it.
Relocate the error path to the end of the function.

This is to prepare for icq handling changes in get_request() and
doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that blkg additions / removals are always done under both q and
blkcg locks, the only places RCU locking is necessary are
blkg_lookup[_create]() for lookup w/o blkcg lock.  This patch drops
unncessary RCU locking replacing it with plain blkcg locking as
necessary.

* blkiocg_pre_destroy() already perform proper locking and don't need
  RCU.  Dropped.

* blkio_read_blkg_stats() now uses blkcg->lock instead of RCU read
  lock.  This isn't a hot path.

* Now unnecessary synchronize_rcu() from queue exit paths removed.
  This makes q->nr_blkgs unnecessary.  Dropped.

* RCU annotation on blkg->q removed.

-v2: Vivek pointed out that blkg_lookup_create() still needs to be
     called under rcu_read_lock().  Updated.

-v3: After the update, stats_lock locking in blkio_read_blkg_stats()
     shouldn't be using _irq variant as it otherwise ends up enabling
     irq while blkcg->lock is locked.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkgs are chained from both blkcgs and request_queues and thus
subjected to two locks - blkcg->lock and q->queue_lock.  As both blkcg
and q can go away anytime, locking during removal is tricky.  It's
currently solved by wrapping removal inside RCU, which makes the
synchronization complex.  There are three locks to worry about - the
outer RCU, q lock and blkcg lock, and it leads to nasty subtle
complications like conditional synchronize_rcu() on queue exit paths.

For all other paths, blkcg lock is naturally nested inside q lock and
the only exception is blkcg removal path, which is a very cold path
and can be implemented as clumsy but conceptually-simple reverse
double lock dancing.

This patch updates blkg removal path such that blkgs are removed while
holding both q and blkcg locks, which is trivial for request queue
exit path - blkg_destroy_all().  The blkcg removal path,
blkiocg_pre_destroy(), implements reverse double lock dancing
essentially identical to ioc_release_fn().

This simplifies blkg locking - no half-dead blkgs to worry about.  Now
unnecessary RCU annotations will be removed by the next patch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkg is per cgroup-queue-policy combination.  This is
unnatural and leads to various convolutions in partially used
duplicate fields in blkg, config / stat access, and general management
of blkgs.

This patch make blkg's per cgroup-queue and let them serve all
policies.  blkgs are now created and destroyed by blkcg core proper.
This will allow further consolidation of common management logic into
blkcg core and API with better defined semantics and layering.

As a transitional step to untangle blkg management, elvswitch and
policy [de]registration, all blkgs except the root blkg are being shot
down during elvswitch and bypass.  This patch adds blkg_root_update()
to update root blkg in place on policy change.  This is hacky and racy
but should be good enough as interim step until we get locking
simplified and switch over to proper in-place update for all blkgs.

-v2: Root blkgs need to be updated on elvswitch too and blkg_alloc()
     comment wasn't updated according to the function change.  Fixed.
     Both pointed out by Vivek.

-v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for
     all policies.  This freed root pd during elvswitch before the
     last queue finished exiting and led to oops.  Directly invoke
     update_root_blkg_pd() only on BLKIO_POLICY_PROP from
     cfq_exit_queue().  This also is closer to what will be done with
     proper in-place blkg update.  Reported by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With the previous patch to move blkg list heads and counters to
request_queue and blkg, logic to manage them in both policies are
almost identical and can be moved to blkcg core.

This patch moves blkg link logic into blkg_lookup_create(), implements
common blkg unlink code in blkg_destroy(), and updates
blkg_destory_all() so that it's policy specific and can skip root
group.  The updated blkg_destroy_all() is now used to both clear queue
for bypassing and elv switching, and release all blkgs on q exit.

This patch introduces a race window where policy [de]registration may
race against queue blkg clearing.  This can only be a problem on cfq
unload and shouldn't be a real problem in practice (and we have many
other places where this race already exists).  Future patches will
remove these unlikely races.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, specific policy implementations are responsible for
maintaining list and number of blkgs.  This duplicates code
unnecessarily, and hinders factoring common code and providing blkcg
API with better defined semantics.

After this patch, request_queue hosts list heads and counters and blkg
has list nodes for both policies.  This patch only relocates the
necessary fields and the next patch will actually move management code
into blkcg core.

Note that request_queue->blkg_list[] and ->nr_blkgs[] are hardcoded to
have 2 elements.  This is to avoid include dependency and will be
removed by the next patch.

This patch doesn't introduce any behavior change.

-v2: Now unnecessary conditional on CONFIG_BLK_CGROUP_MODULE removed
     as pointed out by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg is scheduled to be unified for all policies and thus there won't
be one-to-one mapping from blkg to policy.  Update stat related
functions to take explicit @pol or @plid arguments and not use
blkg->plid.

This is painful for now but most of specific stat interface functions
will be replaced with a handful of generic helpers.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To prepare for unifying blkgs for different policies, make blkg->pd an
array with BLKIO_NR_POLICIES elements and move blkg->conf, ->stats,
and ->stats_cpu into blkg_policy_data.

This patch doesn't introduce any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkcg policy implementations manage blkg refcnt duplicating
mostly identical code in both policies.  This patch moves refcnt to
blkg and let blkcg core handle refcnt and freeing of blkgs.

* cfq blkgs now also get freed via RCU.

* cfq blkgs lose RB_EMPTY_ROOT() sanity check on blkg free.  If
  necessary, we can add blkio_exit_group_fn() to resurrect this.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkg's are embedded in private data blkcg policy private
data structure and thus allocated and freed by policies.  This leads
to duplicate codes in policies, hinders implementing common part in
blkcg core with strong semantics, and forces duplicate blkg's for the
same cgroup-q association.

This patch introduces struct blkg_policy_data which is a separate data
structure chained from blkg.  Policies specifies the amount of private
data it needs in its blkio_policy_type->pdata_size and blkcg core
takes care of allocating them along with blkg which can be accessed
using blkg_to_pdata().  blkg can be determined from pdata using
pdata_to_blkg().  blkio_alloc_group_fn() method is accordingly updated
to blkio_init_group_fn().

For consistency, tg_of_blkg() and cfqg_of_blkg() are replaced with
blkg_to_tg() and blkg_to_cfqg() respectively, and functions to map in
the reverse direction are added.

Except that policy specific data now lives in a separate data
structure from blkg, this patch doesn't introduce any functional
difference.

This will be used to unify blkg's for different policies.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Keep track of all request_queues which have blkcg initialized and turn
on bypass and invoke blkcg_clear_queue() on all before making changes
to blkcg policies.

This is to prepare for moving blkg management into blkcg core.  Note
that this uses more brute force than necessary.  Finer grained shoot
down will be implemented later and given that policy [un]registration
almost never happens on running systems (blk-throtl can't be built as
a module and cfq usually is the builtin default iosched), this
shouldn't be a problem for the time being.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently block core calls directly into blk-throttle for init, drain
and exit.  This patch adds blkcg_{init|drain|exit}_queue() which wraps
the blk-throttle functions.  This is to give more control and
visiblity to blkcg core layer for proper layering.  Further patches
will add logic common to blkcg policies to the functions.

While at it, collapse blk_throtl_release() into blk_throtl_exit().
There's no reason to keep them separate.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkg points to the associated blkcg via its css_id.  This
unnecessarily complicates dereferencing blkcg.  Let blkg hold a
reference to the associated blkcg and point directly to it and disable
css_id on blkio_subsys.

This change requires splitting blkiocg_destroy() into
blkiocg_pre_destroy() and blkiocg_destroy() so that all blkg's can be
destroyed and all the blkcg references held by them dropped during
cgroup removal.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk-cgroup printing code currently assumes that there is a device/disk
associated with every queue in the system, but modules like floppy,
can instantiate request queues without registering disk which can lead
to oops.

Skip the queue/blkg which don't have dev/disk associated with them.

-tj: Factored out backing_dev_info check into blkg_dev_name().
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg->dev is dev_t recording the device number of the block device for
the associated request_queue.  It is used to identify the associated
block device when printing out configuration or stats.

This is redundant to begin with.  A blkg is an association between a
cgroup and a request_queue and it of course is possible to reach
request_queue from blkg and synchronization conventions are in place
for safe q dereferencing, so this shouldn't be necessary from the
beginning.  Furthermore, it's initialized by sscanf()ing the device
name of backing_dev_info.  The mind boggles.

Anyways, if blkg is visible under rcu lock, we *know* that the
associated request_queue hasn't gone away yet and its bdi is
registered and alive - blkg can't be created for request_queue which
hasn't been fully initialized and it can't go away before blkg is
removed.

Let stat and conf read functions get device name from
blkg->q->backing_dev_info.dev and pass it down to printing functions
and remove blkg->dev.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that blkcg configuration lives in blkg's, blkio_policy_node is no
longer necessary.  Kill it.

blkio_policy_parse_and_set() now fails if invoked for missing device
and functions to print out configurations are updated to print from
blkg's.

cftype_blkg_same_policy() is dropped along with other policy functions
for consistency.  Its one line is open coded in the only user -
blkio_read_blkg_stats().

-v2: Update to reflect the retry-on-bypass logic change of the
     previous patch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkcg is very peculiar in that it allows setting and remembering
configurations for non-existent devices by maintaining separate data
structures for configuration.

This behavior is completely out of the usual norms and outright
confusing; furthermore, it uses dev_t number to match the
configuration to devices, which is unpredictable to begin with and
becomes completely unuseable if EXT_DEVT is fully used.

It is wholely unnecessary - we already have fully functional userland
mechanism to program devices being hotplugged which has full access to
device identification, connection topology and filesystem information.

Add a new struct blkio_group_conf which contains all blkcg
configurations to blkio_group and let blkio_group, which can be
created iff the associated device exists and is removed when the
associated device goes away, carry all configurations.

Note that, after this patch, all newly created blkg's will always have
the default configuration (unlimited for throttling and blkcg's weight
for propio).

This patch makes blkio_policy_node meaningless but doesn't remove it.
The next patch will.

-v2: Updated to retry after short sleep if blkg lookup/creation failed
     due to the queue being temporarily bypassed as indicated by
     -EBUSY return.  Pointed out by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently both blk-throttle and cfq-iosched implement their own
blkio_group creation code in throtl_get_tg() and cfq_get_cfqg().  This
patch factors out the common code into blkg_lookup_create(), which
returns ERR_PTR value so that transitional failures due to queue
bypass can be distinguished from other failures.

* New plkio_policy_ops methods blkio_alloc_group_fn() and
  blkio_link_group_fn added.  Both are transitional and will be
  removed once the blkg management code is fully moved into
  blk-cgroup.c.

* blkio_alloc_group_fn() allocates policy-specific blkg which is
  usually a larger data structure with blkg as the first entry and
  intiailizes it.  Note that initialization of blkg proper, including
  percpu stats, is responsibility of blk-cgroup proper.

  Note that default config (weight, bps...) initialization is done
  from this method; otherwise, we end up violating locking order
  between blkcg and q locks via blkcg_get_CONF() functions.

* blkio_link_group_fn() is called under queue_lock and responsible for
  linking the blkg to the queue.  blkcg side is handled by blk-cgroup
  proper.

* The common blkg creation function is named blkg_lookup_create() and
  blkiocg_lookup_group() is renamed to blkg_lookup() for consistency.
  Also, throtl / cfq related functions are similarly [re]named for
  consistency.

This simplifies blkcg policy implementations and enables further
cleanup.

-v2: Vivek noticed that blkg_lookup_create() incorrectly tested
     blk_queue_dead() instead of blk_queue_bypass() leading a user of
     the function ending up creating a new blkg on bypassing queue.
     This is a bug introduced while relocating bypass patches before
     this one.  Fixed.

-v3: ERR_PTR patch folded into this one.  @for_root added to
     blkg_lookup_create() to allow creating root group on a bypassed
     queue during elevator switch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For root blkg, blk_throtl_init() was using throtl_alloc_tg()
explicitly and cfq_init_queue() was manually initializing embedded
cfqd->root_group, adding unnecessarily different code paths to blkg
handling.

Make both use the usual blkio_group get functions - throtl_get_tg()
and cfq_get_cfqg() - for the root blkio_group too.  Note that
blk_throtl_init() callsite is pushed downwards in
blk_alloc_queue_node() so that @q is sufficiently initialized for
throtl_get_tg().

This simplifies root blkg handling noticeably for cfq and will allow
further modularization of blkcg API.

-v2: Vivek pointed out that using cfq_get_cfqg() won't work if
     CONFIG_CFQ_GROUP_IOSCHED is disabled.  Fix it by factoring out
     initialization of base part of cfqg into cfq_init_cfqg_base() and
     alloc/init/free explicitly if !CONFIG_CFQ_GROUP_IOSCHED.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Block cgroup policies are maintained in a linked list and,
theoretically, multiple policies sharing the same policy ID are
allowed.

This patch temporarily restricts one policy per plid and adds
blkio_policy[] array which indexes registered policy types by plid.
Both the restriction and blkio_policy[] array are transitional and
will be removed once API cleanup is complete.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkgio_group is association between a block cgroup and a queue for a
given policy.  Using opaque void * for association makes things
confusing and hinders factoring of common code.  Use request_queue *
and, if necessary, policy id instead.

This will help block cgroup API cleanup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In both blkg get functions - throtl_get_tg() and cfq_get_cfqg(),
instead of obtaining blkcg of %current explicitly, let the caller
specify the blkcg to use as parameter and make both functions hold on
to the blkcg.

This is part of block cgroup interface cleanup and will help making
blkcg API more modular.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

rcu_read_lock() in throtl_get_tb() and cfq_get_cfqg() holds onto
@blkcg while looking up blkg.  For API cleanup, the next patch will
make the caller responsible for determining @blkcg to look blkg from
and let them specify it as a parameter.  Move rcu read locking out to
the callers to prepare for the change.

-v2: Originally this patch was described as a fix for RCU read locking
     bug around @blkg, which Vivek pointed out to be incorrect.  It
     was from misunderstanding the role of rcu locking as protecting
     @blkg not @blkcg.  Patch description updated.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Elevator switch may involve changes to blkcg policies.  Implement
shoot down of blkio_groups.

Combined with the previous bypass updates, the end goal is updating
blkcg core such that it can ensure that blkcg's being affected become
quiescent and don't have any per-blkg data hanging around before
commencing any policy updates.  Until queues are made aware of the
policies that applies to them, as an interim step, all per-policy blkg
data will be shot down.

* blk-throtl doesn't need this change as it can't be disabled for a
  live queue; however, update it anyway as the scheduled blkg
  unification requires this behavior change.  This means that
  blk-throtl configuration will be unnecessarily lost over elevator
  switch.  This oddity will be removed after blkcg learns to associate
  individual policies with request_queues.

* blk-throtl dosen't shoot down root_tg.  This is to ease transition.
  Unified blkg will always have persistent root group and not shooting
  down root_tg for now eases transition to that point by avoiding
  having to update td->root_tg and is safe as blk-throtl can never be
  disabled

-v2: Vivek pointed out that group list is not guaranteed to be empty
     on return from clear function if it raced cgroup removal and
     lost.  Fix it by waiting a bit and retrying.  This kludge will
     soon be removed once locking is updated such that blkg is never
     in limbo state between blkcg and request_queue locks.

     blk-throtl no longer shoots down root_tg to avoid breaking
     td->root_tg.

     Also, Nest queue_lock inside blkio_list_lock not the other way
     around to avoid introduce possible deadlock via blkcg lock.

-v3: blkcg_clear_queue() repositioned and renamed to
     blkg_destroy_all() to increase consistency with later changes.
     cfq_clear_queue() updated to check q->elevator before
     dereferencing it to avoid NULL dereference on not fully
     initialized queues (used by later change).
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Extend queue bypassing such that dying queue is always bypassing and
blk-throttle is drained on bypass.  With blkcg policies updated to
test blk_queue_bypass() instead of blk_queue_dead(), this ensures that
no bio or request is held by or going through blkcg policies on a
bypassing queue.

This will be used to implement blkg cleanup on elevator switches and
policy changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Rename and extend elv_queisce_start/end() to
blk_queue_bypass_start/end() which are exported and supports nesting
via @q->bypass_depth.  Also add blk_queue_bypass() to test bypass
state.

This will be further extended and used for blkio_group management.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

elevator_ops->elevator_init_fn() has a weird return value.  It returns
a void * which the caller should assign to q->elevator->elevator_data
and %NULL return denotes init failure.

Update such that it returns integer 0/-errno and sets elevator_data
directly as necessary.

This makes the interface more conventional and eases further cleanup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Elevator switch tries hard to keep as much as context until new
elevator is ready so that it can revert to the original state if
initializing the new elevator fails for some reason.  Unfortunately,
with more auxiliary contexts to manage, this makes elevator init and
exit paths too complex and fragile.

This patch makes elevator_switch() unregister the current elevator and
flush icq's before start initializing the new one.  As we still keep
the old elevator itself, the only difference is that we lose icq's on
rare occassions of switching failure, which isn't critical at all.

Note that this makes explicit elevator parameter to
elevator_init_queue() and __elv_register_queue() unnecessary as they
always can use the current elevator.

This patch enables block cgroup cleanups.

-v2: blk_add_trace_msg() prints elevator name from @new_e instead of
     @e->type as the local variable no longer exists.  This caused
     build failure on CONFIG_BLK_DEV_IO_TRACE.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

cfq has been registering zeroed blkio_poilcy_cfq if CFQ_GROUP_IOSCHED
is disabled.  This fortunately doesn't collide with blk-throtl as
BLKIO_POLICY_PROP is zero but is unnecessary and risky.  Just don't
register it if not enabled.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Block cgroup core can be built as module; however, it isn't too useful
as blk-throttle can only be built-in and cfq-iosched is usually the
default built-in scheduler.  Scheduled blkcg cleanup requires calling
into blkcg from block core.  To simplify that, disallow building blkcg
as module by making CONFIG_BLK_CGROUP bool.

If building blkcg core as module really matters, which I doubt, we can
revisit it after blkcg API cleanup.

-v2: Vivek pointed out that IOSCHED_CFQ was incorrectly updated to
     depend on BLK_CGROUP.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blk_cleanup_queue() doesn't call elv_drain_elevator() if
q->elevator doesn't exist; however, bio based drivers don't have
elevator initialized but can still use blk-throttle.  This patch moves
q->elevator test inside blk_drain_queue() such that only
elv_drain_elevator() is skipped if !q->elevator.

-v2: loop can have registered queue which has NULL request_fn.  Make
     sure we don't call into __blk_run_queue() in such cases.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NVivek Goyal <vgoyal@redhat.com>

Fold in bug fix from Vivek.
Signed-off-by: NJens Axboe <axboe@kernel.dk>