The device tree property uses '-' not '_'.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Allow Headphone and Microphone jack detect gpios to be specified in
device tree.  This will allow a few systems including rk3288_max98090
to use simple-card instead of having their own board file.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some platforms require that the codecs mclk is a fixed multiplication
factor of the audio stream rate. Add a optional property to the
binding to hold this factor and implement a hw_params() function to
make use of it.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NMark Brown <broonie@linaro.org>

The properties like format, bitclock-master, frame-master,
bitclock-inversion, and frame-inversion should be common to the dais
connected with a dai-link. For bitclock-master and frame-master
properties to be unambiguous they need to indicate the mastering dai
node with a phandle.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMark Brown <broonie@linaro.org>

Many couples of CPU/CODEC DAI links may be described in the DT
thanks to 'simple-audio-card,dai-link' containers.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMark Brown <broonie@linaro.org>

The current simple-card driver separates the daimft for cpu_dai and codec_dai.
So we might get different values for them (0x4003 and 0x1003 for example):

asoc-simple-card sound-cs42888.12: cpu : 2024000.esai / 4003 / 132000000
asoc-simple-card sound-cs42888.12: codec : cs42888 / 1003 / 24576000
asoc-simple-card sound-cs42888.12: cs42888 <-> 2024000.esai mapping ok

This is not allowed at all as we need to keep the DAIFMT settings identical
for both the ends of the link.

Thus this patch fixes it by overwriting the cpu_dai->fmt with codec_dai->fmt
since we defined the DAIFMT_MASTER basing on CODEC at the first place while
the other bits are same.
Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

For some CPU/CODEC DAI devices the slot information maybe needed. This
patch adds the slot information parsing for simple-card driver.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This add the following three new properties documenting and usage
for simple card:

"simple-audio-card,name",
"simple-audio-card,widgets",
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Fix the usage of simple card widgets routing property, and make it the
same with simple card routing property name.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Even though we might not have rigor rule for the simple card property names,
according to the existing ones, they are all in a same pattern:

[simple-audio-card,]XXX;

Rename simple-audio-routing to simple-audio-card,routing, and make the simple
card's properties has one unified name.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Parses a simple DAPM route table from device tree.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Support for loading the simple-card module via DeviceTree.
It requests CPU/CODEC information.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>