- 29 6月, 2005 17 次提交
-
-
由 Patrick McHardy 提交于
In 2.6.12 we started dropping the conntrack reference when a packet leaves the IP layer. This broke connection tracking on a bridge, because bridge-netfilter defers calling some NF_IP_* hooks to the bridge layer for locally generated packets going out a bridge, where the conntrack reference is no longer available. This patch keeps the reference in this case as a temporary solution, long term we will remove the defered hook calling. No attempt is made to drop the reference in the bridge-code when it is no longer needed, tc actions could already have sent the packet anywhere. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
linux/etherdevice.h can't be included standalone at the moment, which is required in order to sort the header files in the recommended alphabetic order. This patch fixes that and is needed to build spider_net. Signed-off-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Vlasenko 提交于
Signed-off-by: NDenis Vlasenko <vda@ilport.com.ua> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Remove two more unused IPV6_AUTHHDR option things, which I failed to remove them last time, plus, mark IPV6_AUTHHDR obsolete. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
In an smp system, it is possible for an connection timer to expire, calling ip_vs_conn_expire while the connection table is being flushed, before ct_write_lock_bh is acquired. Since the list iterator loop in ip_vs_con_flush releases and re-acquires the spinlock (even though it doesn't re-enable softirqs), it is possible for the expiration function to modify the connection list, while it is being traversed in ip_vs_conn_flush. The result is that the next pointer gets set to NULL, and subsequently dereferenced, resulting in an oops. Signed-off-by: NNeil Horman <nhorman@redhat.com> Acked-by: JulianAnastasov Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Robert Olsson 提交于
This should help up the insertion... but the resize is more crucial. and complex and needs some thinking. Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxime Bizon 提交于
I think there is a small bug in ipconfig.c in case IPCONFIG_DHCP is set and dhcp is used. When a DHCPOFFER is received, ip address is kept until we get DHCPACK. If no ack is received, ic_dynamic() returns negatively, but leaves the offered ip address in ic_myaddr. This makes the main loop in ip_auto_config() break and uses the maybe incomplete configuration. Not sure if it's the best way to do, but the following trivial patch correct this. Signed-off-by: NMaxime Bizon <mbizon@freebox.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dietmar Eggemann 提交于
I followed Thomas' proposal to see every martian destination as a case where the ipInAddrErrors counter has to be incremented. There are two advantages by doing so: (1) The relation between the ipInReceive counter and all the other ipInXXX counters is more accurate in the case the RTN_UNICAST code check fails and (2) it makes the code in ip_route_input_slow easier. Signed-off-by: NDietmar Eggemann <dietmar.eggemann@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Each IPv6 Temporary Address (w/ CONFIG_IPV6_PRIVACY) is dumped twice to netlink. Because temporary addresses are listed in idev->addr_list, there's no need to dump idev->tempaddr separately. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Plug holes with padding fields and initialized them to zero. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Mostly missing initialization of padding fields of 1 or 2 bytes length, two instances of uninitialized nlmsgerr->msg of 16 bytes length. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
This patch adds mangling of ARP requests (in addition to replies), since ARP caches are made from snooping both requests and replies. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
When converting over the skb_header_pointer(), I converted parts of this module incorrectly. Kill the 'u' union in ebt_log() and all the bogus references to it. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Merge head 'upstream-20050628-1' of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
-
- 28 6月, 2005 23 次提交
-
-
由 Jeff Garzik 提交于
-
由 Tejun Heo 提交于
This patch removes unnecessary ata_port_start/stop() calls from ahci_port_start/stop(). Signed-off-by: NTejun Heo <htejun@gmail.com>
-
由 Tejun Heo 提交于
This patch lengthens the delay between DET setting and clearing for COMMRESET from 400us to 1ms. I couldn't find any requiremen regarding the duration of COMMRESET in SATA I/II specs but AHCI-1.1 10.4.2 states that it should be at least 1ms. Signed-off-by: NTejun Heo <htejun@gmail.com>
-
由 Jeff Garzik 提交于
Contributions from Alan Cox and maximilian attems.
-
由 Andrew Morton 提交于
drivers/block/cfq-iosched.c: In function 'cfq_put_queue': drivers/block/cfq-iosched.c:303: sorry, unimplemented: inlining failed in call to 'cfq_pending_requests': function body not available drivers/block/cfq-iosched.c:1080: sorry, unimplemented: called from here drivers/block/cfq-iosched.c: In function '__cfq_may_queue': drivers/block/cfq-iosched.c:1955: warning: the address of 'cfq_cfqq_must_alloc_slice', will always evaluate as 'true' make[1]: *** [drivers/block/cfq-iosched.o] Error 1 make: *** [drivers/block/cfq-iosched.o] Error 2 Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Komuro 提交于
"Allied Telesis RE1000 Plus" is not supported at all by kernel 2.6.12. Signed-off-by: komurojun-mbn@nifty.com
-
由 Edward Falk 提交于
I fleshed out libata.tmpl a bit while I was taking notes.
-
由 Tobias Klauser 提交于
The amd8111e driver directly assigns the DMA mask to the dma_mask member of the struct pci_dev instead of using pci_set_dma_mask(). This makes the call to pci_dma_supported() redundant as pci_set_dma_mask() does this check. I do not own this device so I only compile-tested this patch. Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
-
由 David Brownell 提交于
For boards that invert the SMC91x IRQ line (maybe an FPGA inverts it), the set_irq_type() call can't assume IRQT_RISING. These particular boards currently use OMAP-specific calls to change the trigger type, but the boards break when set_irq_type() stops being a NOP. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
-
由 Jeff Garzik 提交于
-
由 Jeff Garzik 提交于
-
由 Dominik Brodowski 提交于
Don't auto-configure yenta sockets for PCMCIA devices if it is connected to the root PCI bus on the x86 or x86_64 architectures. Previously, this was handled by the "ioport_resource"/"iomem_resource" check a few lines below, but with the new ACPI-based resource handling this doesn't catch all cases any longer. pci-yenta-cardbus-fix.patch and this patch should solve the initialization time trouble. However, the ACPI-based PCI resource handling is badly broken, IMHO: - many resources of devices don't show up in the resource trees ( /proc/iomem and /proc/ioports) any longer. This means that PCMCIA, but also possibly other subsystems (ISA, PnP, ...) do not know which resources it cannot use. - verify_root_windows() should fail if there are no iomem _or_ ioport resources, not only if there are no iomem _and_ ioport resources. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Provide a "modalias" entry in sysfs for PCMCIA devices. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
The PCMCIA card services layer is never setting the i/o map attributes when SS_CAP_STATIC_MAP is specified. Net result, sockets' set_io_map() calls always see requests with most flags clear, meaning 8 bit access. For hardware that always autosizes, that won't matter; and all current STATIC_MAP drivers ignore those attributes. A new driver (for at91rm9200) suffers badly from this, since this forces everything into 8 bit mode and that breaks both (a) cards requiring 16 bit access, and (b) ide-cs; but of course 8-bit cards work OK (as does accessing card attributes). So this patch arranges to pass the attributes down, matching the behavior for non-static mappings (using the first/only I/O window). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
register_chrdev() can return errors (negative) other then -EBUSY, so check for any negative error code. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jar 提交于
Fix example hash generator in Documentation. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
- properly bail out in set_cis_map if call to socket driver's set_mem_map failed - don't abort do_mem_probe cycle if one entry failed (!CONFIG_PCMCIA_PROBE) - don't do iomem probing in chunks larger than 0x800000 (1 << 23) as yenta_socket and vrc4173_cardu.c fail to set_mem_map for windows equal to or larger than (1 << 24). Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
PCMCIA needs CRC32. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
The size of pointers may differ between (userspace) modpost and (kernelspace) modules -- so fix mod_devicetable.h to reflect this possibility. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Remove the IRQ_INFO2_VALID flag in synclink_cs -- I overlooked it when removing all other users in PCMCIA drivers for 2.6.11. Thanks to Marcelo Tosatti for noticing it. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
randy_dunlap <rdunlap@xenotime.net> Convert deprecated check_region() calls to request/release region. Add return value check on one request_region(). I suspect that it may do an extra release_region(), which should generate a warning message from the kernel. Signed-off-by: Nrandy_dunlap <rdunlap@xenotime.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Properly wait for the class refcount to reach zero. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-