Add 64bit unique id to blkcg.  This will be used by policies which
want blkcg identity test to tell whether the associated blkcg has
changed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With recent plug merge updates, all non-percpu stat updates happen
under queue_lock making stats_lock unnecessary to synchronize stat
updates.  The only synchronization necessary is stat reading, which
can be done using u64_stats_sync instead.

This patch removes blkio_group->stats_lock and adds
blkio_group_stats->syncp for reader synchronization.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Restructure blkio_get_stat() to prepare for removal of stats_lock.

* Define BLKIO_STAT_ARR_NR explicitly to denote which stats have
  subtypes instead of using BLKIO_STAT_QUEUED.

* Separate out stat acquisition and printing.  After this, there are
  only two users of blkio_fill_stat().  Just open code it.

* The code was mixing MAX_KEY_LEN and MAX_KEY_LEN - 1.  There's no
  need to subtract one.  Use MAX_KEY_LEN consistently.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkiocg_reset_stats() implements stat reset for blkio.reset_stats
cgroupfs file.  This feature is very unconventional and something
which shouldn't have been merged.  It's only useful when there's only
one user or tool looking at the stats.  As soon as multiple users
and/or tools are involved, it becomes useless as resetting disrupts
other usages.  There are very good reasons why all other stats expect
readers to read values at the start and end of a period and subtract
to determine delta over the period.

The implementation is rather complex - some fields shouldn't be
cleared and it saves some fields, resets whole and restores for some
reason.  Reset of percpu stats is also racy.  The comment points to
64bit store atomicity for the reason but even without that stores for
zero can simply race with other CPUs doing RMW and get clobbered.

Simplify reset by

* Clear selectively instead of resetting and restoring.

* Grouping debug stat fields to be reset and using memset() over them.

* Not caring about stats_lock.

* Using memset() to reset percpu stats.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With recent plug merge updates, merged stats are no longer called for
plug merges and now only updated while holding queue_lock.  As
stats_lock is scheduled to be removed, there's no reason to use percpu
for merged stats.  Don't use percpu for merged stats.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Current per cpu stat allocation assumes GFP_KERNEL allocation flag. But in
IO path there are times when we want GFP_NOIO semantics. As there is no
way to pass the allocation flags to alloc_percpu(), this patch delays the
allocation of stats using a worker thread.

v2-> tejun suggested following changes. Changed the patch accordingly.
	- move alloc_node location in structure
	- reduce the size of names of some of the fields
	- Reduce the scope of locking of alloc_list_lock
	- Simplified stat_alloc_fn() by allocating stats for all
	  policies in one go and then assigning these to a group.

v3 -> Andrew suggested to put some comments in the code. Also raised
      concerns about trying to allocate infinitely in case of allocation
      failure. I have changed the logic to sleep for 10ms before retrying.
      That should take care of non-preemptible UP kernels.

v4 -> Tejun had more suggestions.
	- drop list_for_each_entry_all()
	- instead of msleep() use queue_delayed_work()
	- Some cleanups realted to more compact coding.

v5-> tejun suggested more cleanups leading to more compact code.

tj: - Relocated pcpu_stats into blkio_stat_alloc_fn().
    - Minor comment update.
    - This also fixes suspicious RCU usage warning caused by invoking
      cgroup_path() from blkg_alloc() without holding RCU read lock.
      Now that blkg_alloc() doesn't require sleepable context, RCU
      read lock from blkg_lookup_create() is maintained throughout
      blkg_alloc().
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Implement bio_blkio_cgroup() which returns the blkcg associated with
the bio if exists or %current's blkcg, and use it in blk-throttle and
cfq-iosched propio.  This makes both cgroup policies honor task
association for the bio instead of always assuming %current.

As nobody is using bio_set_task() yet, this doesn't introduce any
behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that blkg additions / removals are always done under both q and
blkcg locks, the only places RCU locking is necessary are
blkg_lookup[_create]() for lookup w/o blkcg lock.  This patch drops
unncessary RCU locking replacing it with plain blkcg locking as
necessary.

* blkiocg_pre_destroy() already perform proper locking and don't need
  RCU.  Dropped.

* blkio_read_blkg_stats() now uses blkcg->lock instead of RCU read
  lock.  This isn't a hot path.

* Now unnecessary synchronize_rcu() from queue exit paths removed.
  This makes q->nr_blkgs unnecessary.  Dropped.

* RCU annotation on blkg->q removed.

-v2: Vivek pointed out that blkg_lookup_create() still needs to be
     called under rcu_read_lock().  Updated.

-v3: After the update, stats_lock locking in blkio_read_blkg_stats()
     shouldn't be using _irq variant as it otherwise ends up enabling
     irq while blkcg->lock is locked.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkgs are chained from both blkcgs and request_queues and thus
subjected to two locks - blkcg->lock and q->queue_lock.  As both blkcg
and q can go away anytime, locking during removal is tricky.  It's
currently solved by wrapping removal inside RCU, which makes the
synchronization complex.  There are three locks to worry about - the
outer RCU, q lock and blkcg lock, and it leads to nasty subtle
complications like conditional synchronize_rcu() on queue exit paths.

For all other paths, blkcg lock is naturally nested inside q lock and
the only exception is blkcg removal path, which is a very cold path
and can be implemented as clumsy but conceptually-simple reverse
double lock dancing.

This patch updates blkg removal path such that blkgs are removed while
holding both q and blkcg locks, which is trivial for request queue
exit path - blkg_destroy_all().  The blkcg removal path,
blkiocg_pre_destroy(), implements reverse double lock dancing
essentially identical to ioc_release_fn().

This simplifies blkg locking - no half-dead blkgs to worry about.  Now
unnecessary RCU annotations will be removed by the next patch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkg is per cgroup-queue-policy combination.  This is
unnatural and leads to various convolutions in partially used
duplicate fields in blkg, config / stat access, and general management
of blkgs.

This patch make blkg's per cgroup-queue and let them serve all
policies.  blkgs are now created and destroyed by blkcg core proper.
This will allow further consolidation of common management logic into
blkcg core and API with better defined semantics and layering.

As a transitional step to untangle blkg management, elvswitch and
policy [de]registration, all blkgs except the root blkg are being shot
down during elvswitch and bypass.  This patch adds blkg_root_update()
to update root blkg in place on policy change.  This is hacky and racy
but should be good enough as interim step until we get locking
simplified and switch over to proper in-place update for all blkgs.

-v2: Root blkgs need to be updated on elvswitch too and blkg_alloc()
     comment wasn't updated according to the function change.  Fixed.
     Both pointed out by Vivek.

-v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for
     all policies.  This freed root pd during elvswitch before the
     last queue finished exiting and led to oops.  Directly invoke
     update_root_blkg_pd() only on BLKIO_POLICY_PROP from
     cfq_exit_queue().  This also is closer to what will be done with
     proper in-place blkg update.  Reported by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With the previous patch to move blkg list heads and counters to
request_queue and blkg, logic to manage them in both policies are
almost identical and can be moved to blkcg core.

This patch moves blkg link logic into blkg_lookup_create(), implements
common blkg unlink code in blkg_destroy(), and updates
blkg_destory_all() so that it's policy specific and can skip root
group.  The updated blkg_destroy_all() is now used to both clear queue
for bypassing and elv switching, and release all blkgs on q exit.

This patch introduces a race window where policy [de]registration may
race against queue blkg clearing.  This can only be a problem on cfq
unload and shouldn't be a real problem in practice (and we have many
other places where this race already exists).  Future patches will
remove these unlikely races.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, specific policy implementations are responsible for
maintaining list and number of blkgs.  This duplicates code
unnecessarily, and hinders factoring common code and providing blkcg
API with better defined semantics.

After this patch, request_queue hosts list heads and counters and blkg
has list nodes for both policies.  This patch only relocates the
necessary fields and the next patch will actually move management code
into blkcg core.

Note that request_queue->blkg_list[] and ->nr_blkgs[] are hardcoded to
have 2 elements.  This is to avoid include dependency and will be
removed by the next patch.

This patch doesn't introduce any behavior change.

-v2: Now unnecessary conditional on CONFIG_BLK_CGROUP_MODULE removed
     as pointed out by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg is scheduled to be unified for all policies and thus there won't
be one-to-one mapping from blkg to policy.  Update stat related
functions to take explicit @pol or @plid arguments and not use
blkg->plid.

This is painful for now but most of specific stat interface functions
will be replaced with a handful of generic helpers.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To prepare for unifying blkgs for different policies, make blkg->pd an
array with BLKIO_NR_POLICIES elements and move blkg->conf, ->stats,
and ->stats_cpu into blkg_policy_data.

This patch doesn't introduce any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkcg policy implementations manage blkg refcnt duplicating
mostly identical code in both policies.  This patch moves refcnt to
blkg and let blkcg core handle refcnt and freeing of blkgs.

* cfq blkgs now also get freed via RCU.

* cfq blkgs lose RB_EMPTY_ROOT() sanity check on blkg free.  If
  necessary, we can add blkio_exit_group_fn() to resurrect this.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkg's are embedded in private data blkcg policy private
data structure and thus allocated and freed by policies.  This leads
to duplicate codes in policies, hinders implementing common part in
blkcg core with strong semantics, and forces duplicate blkg's for the
same cgroup-q association.

This patch introduces struct blkg_policy_data which is a separate data
structure chained from blkg.  Policies specifies the amount of private
data it needs in its blkio_policy_type->pdata_size and blkcg core
takes care of allocating them along with blkg which can be accessed
using blkg_to_pdata().  blkg can be determined from pdata using
pdata_to_blkg().  blkio_alloc_group_fn() method is accordingly updated
to blkio_init_group_fn().

For consistency, tg_of_blkg() and cfqg_of_blkg() are replaced with
blkg_to_tg() and blkg_to_cfqg() respectively, and functions to map in
the reverse direction are added.

Except that policy specific data now lives in a separate data
structure from blkg, this patch doesn't introduce any functional
difference.

This will be used to unify blkg's for different policies.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently block core calls directly into blk-throttle for init, drain
and exit.  This patch adds blkcg_{init|drain|exit}_queue() which wraps
the blk-throttle functions.  This is to give more control and
visiblity to blkcg core layer for proper layering.  Further patches
will add logic common to blkcg policies to the functions.

While at it, collapse blk_throtl_release() into blk_throtl_exit().
There's no reason to keep them separate.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blkg points to the associated blkcg via its css_id.  This
unnecessarily complicates dereferencing blkcg.  Let blkg hold a
reference to the associated blkcg and point directly to it and disable
css_id on blkio_subsys.

This change requires splitting blkiocg_destroy() into
blkiocg_pre_destroy() and blkiocg_destroy() so that all blkg's can be
destroyed and all the blkcg references held by them dropped during
cgroup removal.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg->dev is dev_t recording the device number of the block device for
the associated request_queue.  It is used to identify the associated
block device when printing out configuration or stats.

This is redundant to begin with.  A blkg is an association between a
cgroup and a request_queue and it of course is possible to reach
request_queue from blkg and synchronization conventions are in place
for safe q dereferencing, so this shouldn't be necessary from the
beginning.  Furthermore, it's initialized by sscanf()ing the device
name of backing_dev_info.  The mind boggles.

Anyways, if blkg is visible under rcu lock, we *know* that the
associated request_queue hasn't gone away yet and its bdi is
registered and alive - blkg can't be created for request_queue which
hasn't been fully initialized and it can't go away before blkg is
removed.

Let stat and conf read functions get device name from
blkg->q->backing_dev_info.dev and pass it down to printing functions
and remove blkg->dev.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that blkcg configuration lives in blkg's, blkio_policy_node is no
longer necessary.  Kill it.

blkio_policy_parse_and_set() now fails if invoked for missing device
and functions to print out configurations are updated to print from
blkg's.

cftype_blkg_same_policy() is dropped along with other policy functions
for consistency.  Its one line is open coded in the only user -
blkio_read_blkg_stats().

-v2: Update to reflect the retry-on-bypass logic change of the
     previous patch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkcg is very peculiar in that it allows setting and remembering
configurations for non-existent devices by maintaining separate data
structures for configuration.

This behavior is completely out of the usual norms and outright
confusing; furthermore, it uses dev_t number to match the
configuration to devices, which is unpredictable to begin with and
becomes completely unuseable if EXT_DEVT is fully used.

It is wholely unnecessary - we already have fully functional userland
mechanism to program devices being hotplugged which has full access to
device identification, connection topology and filesystem information.

Add a new struct blkio_group_conf which contains all blkcg
configurations to blkio_group and let blkio_group, which can be
created iff the associated device exists and is removed when the
associated device goes away, carry all configurations.

Note that, after this patch, all newly created blkg's will always have
the default configuration (unlimited for throttling and blkcg's weight
for propio).

This patch makes blkio_policy_node meaningless but doesn't remove it.
The next patch will.

-v2: Updated to retry after short sleep if blkg lookup/creation failed
     due to the queue being temporarily bypassed as indicated by
     -EBUSY return.  Pointed out by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently both blk-throttle and cfq-iosched implement their own
blkio_group creation code in throtl_get_tg() and cfq_get_cfqg().  This
patch factors out the common code into blkg_lookup_create(), which
returns ERR_PTR value so that transitional failures due to queue
bypass can be distinguished from other failures.

* New plkio_policy_ops methods blkio_alloc_group_fn() and
  blkio_link_group_fn added.  Both are transitional and will be
  removed once the blkg management code is fully moved into
  blk-cgroup.c.

* blkio_alloc_group_fn() allocates policy-specific blkg which is
  usually a larger data structure with blkg as the first entry and
  intiailizes it.  Note that initialization of blkg proper, including
  percpu stats, is responsibility of blk-cgroup proper.

  Note that default config (weight, bps...) initialization is done
  from this method; otherwise, we end up violating locking order
  between blkcg and q locks via blkcg_get_CONF() functions.

* blkio_link_group_fn() is called under queue_lock and responsible for
  linking the blkg to the queue.  blkcg side is handled by blk-cgroup
  proper.

* The common blkg creation function is named blkg_lookup_create() and
  blkiocg_lookup_group() is renamed to blkg_lookup() for consistency.
  Also, throtl / cfq related functions are similarly [re]named for
  consistency.

This simplifies blkcg policy implementations and enables further
cleanup.

-v2: Vivek noticed that blkg_lookup_create() incorrectly tested
     blk_queue_dead() instead of blk_queue_bypass() leading a user of
     the function ending up creating a new blkg on bypassing queue.
     This is a bug introduced while relocating bypass patches before
     this one.  Fixed.

-v3: ERR_PTR patch folded into this one.  @for_root added to
     blkg_lookup_create() to allow creating root group on a bypassed
     queue during elevator switch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Block cgroup policies are maintained in a linked list and,
theoretically, multiple policies sharing the same policy ID are
allowed.

This patch temporarily restricts one policy per plid and adds
blkio_policy[] array which indexes registered policy types by plid.
Both the restriction and blkio_policy[] array are transitional and
will be removed once API cleanup is complete.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkgio_group is association between a block cgroup and a queue for a
given policy.  Using opaque void * for association makes things
confusing and hinders factoring of common code.  Use request_queue *
and, if necessary, policy id instead.

This will help block cgroup API cleanup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Elevator switch may involve changes to blkcg policies.  Implement
shoot down of blkio_groups.

Combined with the previous bypass updates, the end goal is updating
blkcg core such that it can ensure that blkcg's being affected become
quiescent and don't have any per-blkg data hanging around before
commencing any policy updates.  Until queues are made aware of the
policies that applies to them, as an interim step, all per-policy blkg
data will be shot down.

* blk-throtl doesn't need this change as it can't be disabled for a
  live queue; however, update it anyway as the scheduled blkg
  unification requires this behavior change.  This means that
  blk-throtl configuration will be unnecessarily lost over elevator
  switch.  This oddity will be removed after blkcg learns to associate
  individual policies with request_queues.

* blk-throtl dosen't shoot down root_tg.  This is to ease transition.
  Unified blkg will always have persistent root group and not shooting
  down root_tg for now eases transition to that point by avoiding
  having to update td->root_tg and is safe as blk-throtl can never be
  disabled

-v2: Vivek pointed out that group list is not guaranteed to be empty
     on return from clear function if it raced cgroup removal and
     lost.  Fix it by waiting a bit and retrying.  This kludge will
     soon be removed once locking is updated such that blkg is never
     in limbo state between blkcg and request_queue locks.

     blk-throtl no longer shoots down root_tg to avoid breaking
     td->root_tg.

     Also, Nest queue_lock inside blkio_list_lock not the other way
     around to avoid introduce possible deadlock via blkcg lock.

-v3: blkcg_clear_queue() repositioned and renamed to
     blkg_destroy_all() to increase consistency with later changes.
     cfq_clear_queue() updated to check q->elevator before
     dereferencing it to avoid NULL dereference on not fully
     initialized queues (used by later change).
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Block cgroup core can be built as module; however, it isn't too useful
as blk-throttle can only be built-in and cfq-iosched is usually the
default built-in scheduler.  Scheduled blkcg cleanup requires calling
into blkcg from block core.  To simplify that, disallow building blkcg
as module by making CONFIG_BLK_CGROUP bool.

If building blkcg core as module really matters, which I doubt, we can
revisit it after blkcg API cleanup.

-v2: Vivek pointed out that IOSCHED_CFQ was incorrectly updated to
     depend on BLK_CGROUP.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

byptes -> bytes.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make BLKIO_STAT_MERGED per cpu hence gettring rid of need of taking
blkg->stats_lock.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Some of the stats are 64bit and updation will be non atomic on 32bit
architecture. Use sequence counters on 32bit arch to make reading
of stats safe.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Currently we take blkg_stat lock for even updating the stats. So even if
a group has no throttling rules (common case for root group), we end
up taking blkg_lock, for updating the stats.

Make dispatch stats per cpu so that these can be updated without taking
blkg lock.

If cpu goes offline, these stats simply disappear. No protection has
been provided for that yet. Do we really need anything for that?
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

cgroup unaccounted_time file is created only if CONFIG_DEBUG_BLK_CGROUP=y.
there are some fields which are out side this config option. Fix that.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Currentlly we first map the task to cgroup and then cgroup to
blkio_cgroup. There is a more direct way to get to blkio_cgroup
from task using task_subsys_state(). Use that.

The real reason for the fix is that it also avoids a race in generic
cgroup code. During remount/umount rebind_subsystems() is called and
it can do following with and rcu protection.

cgrp->subsys[i] = NULL;

That means if somebody got hold of cgroup under rcu and then it tried
to do cgroup->subsys[] to get to blkio_cgroup, it would get NULL which
is wrong. I was running into this race condition with ltp running on a
upstream derived kernel and that lead to crash.

So ideally we should also fix cgroup generic code to wait for rcu
grace period before setting pointer to NULL. Li Zefan is not very keen
on introducing synchronize_wait() as he thinks it will slow
down moun/remount/umount operations.

So for the time being atleast fix the kernel crash by taking a more
direct route to blkio_cgroup.

One tester had reported a crash while running LTP on a derived kernel
and with this fix crash is no more seen while the test has been
running for over 6 days.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

There are two kind of times that tasks are not charged for: the first
seek and the extra time slice used over the allocated timeslice. Both
of these exported as a new unaccounted_time stat.

I think it would be good to have this reported in 'time' as well, but
that is probably a separate discussion.
Signed-off-by: NJustin TerAvest <teravest@google.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We've found that we still get good, useful isolation at weights this
low. I'd like to adjust the minimum so that any other changes can take
these values into account.
Signed-off-by: NJustin TerAvest <teravest@google.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

- Limit max iops value to UINT_MAX and return error to user if value is more
  than that instead of accepting bigger values and truncating implicitly.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

o Currently any cgroup throttle limit changes are processed asynchronousy and
  the change does not take affect till a new bio is dispatched from same group.

o It might happen that a user sets a redicuously low limit on throttling.
  Say 1 bytes per second on reads. In such cases simple operations like mount
  a disk can wait for a very long time.

o Once bio is throttled, there is no easy way to come out of that wait even if
  user increases the read limit later.

o This patch fixes it. Now if a user changes the cgroup limits, we recalculate
  the bio dispatch time according to new limits.

o Can't take queueu lock under blkcg_lock, hence after the change I wake
  up the dispatch thread again which recalculates the time. So there are some
  variables being synchronized across two threads without lock and I had to
  make use of barriers. Hoping I have used barriers correctly. Any review of
  memory barrier code especially will help.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

o cgroup changes for IOPS throttling rules.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

o cgroup chagnes for throttle policy.

o Introduces READ and WRITE bytes per second throttling rules.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

o This patch prepares the base for introducing new IO control policies.
  Currently all the code is written knowing there is only one policy
  and that is proportional bandwidth. Creating infrastructure for newer
  policies to come in.

o Also there were many functions which were generated using macro. It was
  very confusing. Got rid of those.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This patch fixes few usability and configurability issues.

o All the cgroup based controller options are configurable from
  "Genral Setup/Control Group Support/" menu. blkio is the only exception.
  Hence make this option visible in above menu and make it configurable from
  there to bring it inline with rest of the cgroup based controllers.

o Get rid of CONFIG_DEBUG_CFQ_IOSCHED.

  This option currently does two things.

  - Enable printing of cgroup paths in blktrace
  - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat
    files in cgroup.

  If we are using group scheduling, blktrace data is of not really much use
  if cgroup information is not present. To get this data, currently one has to
  also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of
  all the additional debug stat files which is not desired.

  Hence, this patch moves printing of cgroup paths under
  CONFIG_CFQ_GROUP_IOSCHED.

  This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all
  the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which
  can be enabled through config menu.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Acked-by: NDivyesh Shah <dpshah@google.com>
Reviewed-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>