stable inclusion
from stable-5.10.24
commit ccc942eaf570241d3c2968de8daa3b6f7f227e2f
bugzilla: 51348

--------------------------------

commit cf25ef6b upstream.

Make sure to hold the gpio_lock when removing the gpio device from the
gpio_devices list (when dropping the last reference) to avoid corrupting
the list when there are concurrent accesses.

Fixes: ff2b1359 ("gpio: make the gpiochip a real device")
Cc: stable@vger.kernel.org      # 4.6
Reviewed-by: NSaravana Kannan <saravanak@google.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
[ johan: adjust context to 5.11 ]
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 2e3c8a28f465ecafdac29c091fbc38936bcb0983
bugzilla: 51348

--------------------------------

commit eb441337 upstream.

The commit 0ea68393 ("gpio: dwapb: Convert driver to using the
GPIO-lib-based IRQ-chip") indeliberately made a regression on how
IRQ line from GPIO I²C expander is handled. I.e. it reveals that
the quirk for Intel Galileo Gen 2 misses the part of setting IRQ type
which previously was predefined by gpio-dwapb driver. Now, we have to
reorganize the approach to call necessary parts, which can be done via
ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk.

Without this fix and with above mentioned change the kernel hangs
on the first IRQ event with:

    gpio gpiochip3: Persistence not supported for GPIO 1
    irq 32, desc: 62f8fb50, depth: 0, count: 0, unhandled: 0
    ->handle_irq():  41c7b0ab, handle_bad_irq+0x0/0x40
    ->irq_data.chip(): e03f1e72, 0xc2539218
    ->action(): 0ecc7e6f
    ->action->handler(): 8a3db21e, irq_default_primary_handler+0x0/0x10
       IRQ_NOPROBE set
    unexpected IRQ trap at vector 20

Fixes: ba8c90c6 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea68393 ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit f60ffab25855f15f3dc77145dd5d9eee2d61ec43
bugzilla: 51348

--------------------------------

commit 80939021 upstream.

Currently only search by index is supported. However, in some cases
we might need to pass the quirks to the acpi_dev_gpio_irq_get().

For this, split out acpi_dev_gpio_irq_get_by() and replace
acpi_dev_gpio_irq_get() by calling above with NULL for name parameter.

Fixes: ba8c90c6 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea68393 ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 8df70a5b4d0c18d5bef03c06a244ecd48472f2d2
bugzilla: 51348

--------------------------------

commit 62d5247d upstream.

On some systems the ACPI tables has wrong pin number and instead of
having a relative one it provides an absolute one in the global GPIO
number space.

Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases.

Fixes: ba8c90c6 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Depends-on: 0ea68393 ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip")
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 845ec460537dcf07fa97f093612fa51c6247295a
bugzilla: 51348

--------------------------------

commit 20d7d1c5 upstream.

The following trace excerpt corresponds with a NULL pointer dereference
of 'bp->irq_tbl' in bnxt_setup_inta() on an Aarch64 system after many
device resets:

    Unable to handle kernel NULL pointer dereference at ... 000000d
    ...
    pc : string+0x3c/0x80
    lr : vsnprintf+0x294/0x7e0
    sp : ffff00000f61ba70 pstate : 20000145
    x29: ffff00000f61ba70 x28: 000000000000000d
    x27: ffff0000009c8b5a x26: ffff00000f61bb80
    x25: ffff0000009c8b5a x24: 0000000000000012
    x23: 00000000ffffffe0 x22: ffff000008990428
    x21: ffff00000f61bb80 x20: 000000000000000d
    x19: 000000000000001f x18: 0000000000000000
    x17: 0000000000000000 x16: ffff800b6d0fb400
    x15: 0000000000000000 x14: ffff800b7fe31ae8
    x13: 00001ed16472c920 x12: ffff000008c6b1c9
    x11: ffff000008cf0580 x10: ffff00000f61bb80
    x9 : 00000000ffffffd8 x8 : 000000000000000c
    x7 : ffff800b684b8000 x6 : 0000000000000000
    x5 : 0000000000000065 x4 : 0000000000000001
    x3 : ffff0a00ffffff04 x2 : 000000000000001f
    x1 : 0000000000000000 x0 : 000000000000000d
    Call trace:
    string+0x3c/0x80
    vsnprintf+0x294/0x7e0
    snprintf+0x44/0x50
    __bnxt_open_nic+0x34c/0x928 [bnxt_en]
    bnxt_open+0xe8/0x238 [bnxt_en]
    __dev_open+0xbc/0x130
    __dev_change_flags+0x12c/0x168
    dev_change_flags+0x20/0x60
    ...

Ordinarily, a call to bnxt_setup_inta() (not in trace due to inlining)
would not be expected on a system supporting MSIX at all. However, if
bnxt_init_int_mode() does not end up being called after the call to
bnxt_clear_int_mode() in bnxt_fw_reset_close(), then the driver will
think that only INTA is supported and bp->irq_tbl will be NULL,
causing the above crash.

In the error recovery scenario, we call bnxt_clear_int_mode() in
bnxt_fw_reset_close() early in the sequence. Ordinarily, we will
call bnxt_init_int_mode() in bnxt_hwrm_if_change() after we
reestablish communication with the firmware after reset.  However,
if the sequence has to abort before we call bnxt_init_int_mode() and
if the user later attempts to re-open the device, then it will cause
the crash above.

We fix it in 2 ways:

1. Check for bp->irq_tbl in bnxt_setup_int_mode(). If it is NULL, call
bnxt_init_init_mode().

2. If we need to abort in bnxt_hwrm_if_change() and cannot complete
the error recovery sequence, set the BNXT_STATE_ABORT_ERR flag.  This
will cause more drastic recovery at the next attempt to re-open the
device, including a call to bnxt_init_int_mode().

Fixes: 3bc7d4a3 ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.")
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 686874ca92c2863c713953e2f8c920a9ba9e012b
bugzilla: 51348

--------------------------------

commit 51c44bab upstream.

The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.

Fixes: e01bcdd6 ("vfio: ccw: realize VFIO_DEVICE_GET_REGION_INFO ioctl")
Signed-off-by: NWang Qing <wangqing@vivo.com>
Signed-off-by: NHeiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/1614600093-13992-1-git-send-email-wangqing@vivo.comSigned-off-by: NHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit fd61e772f036601f267aadaecee789bd251baec2
bugzilla: 51348

--------------------------------

commit b36fc875 upstream.

The function hclge_fd_convert_tuple() is used to convert tuples
and tuples mask to TCAM x and y.  But it misuses the source mac
as source mac mask when convert INNER_SRC_MAC, which may cause
the flow director rule works unexpectedly. So fix it.

Fixes: 11732868 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 3c7f1304ee718b4f3c5eca8b2b1545ecd2227a8d
bugzilla: 51348

--------------------------------

commit c75ec148 upstream.

Currently, the driver returns VLAN_VID_MASK for vlan mask field,
when get flow director rule information for rule doesn't use vlan.
It may cause the vlan mask value display as 0xf000 in this
case, like below:

estuary:/$ ethtool -u eth1
50 RX rings available
Total 1 rules

Filter: 2
Rule Type: TCP over IPv4
Src IP addr: 0.0.0.0 mask: 255.255.255.255
Dest IP addr: 0.0.0.0 mask: 255.255.255.255
TOS: 0x0 mask: 0xff
Src port: 0 mask: 0xffff
Dest port: 0 mask: 0xffff
VLAN EtherType: 0x0 mask: 0xffff
VLAN: 0x0 mask: 0xf000
User-defined: 0x1234 mask: 0x0
Action: Direct to queue 3

Fix it by return 0.

Fixes: 05c2314f ("net: hns3: Add support for rule query of flow director")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit f9a87999bdd9aa03df63959542bbb1627adf4efc
bugzilla: 51348

--------------------------------

commit 6740a4e7 upstream.

perf report fails to add valid additional fields with -F when
used with branch or mem modes. Fix it.

Before patch:

  $ perf record -b
  $ perf report -b -F +srcline_from --stdio
  Error:
  Invalid --fields key: `srcline_from'

After patch:

  $ perf report -b -F +srcline_from --stdio
  # Samples: 8K of event 'cycles'
  # Event count (approx.): 8784
  ...

Committer notes:

There was an inversion: when looking at branch stack dimensions (keys)
it was checking if the sort mode was 'mem', not 'branch'.

Fixes: aa6b3c99 ("perf report: Make -F more strict like -s")
Reported-by: NAthira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: NAthira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NAthira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210304062958.85465-1-ravi.bangoria@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 57a798e4a197a3d6f559b38397168988e952828d
bugzilla: 51348

--------------------------------

commit 137a5258 upstream.

Issue detected by address sanitizer.

Fixes: cd4ceb63 ("perf util: Save pid-cmdline mapping into tracing header")
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210226221431.1985458-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit e4f7ffaa7cdfe7b680ede760f3a3ad5e1d12f049
bugzilla: 51348

--------------------------------

commit ae9b24dd upstream.

Currently, only external bits are added to the PTYS register, whereas
there is one external bit that is wrongly marked as internal, and so was
recently removed from the register.

Add that bit to the PTYS register again, as this bit is no longer
internal.

Its removal resulted in '100000baseLR4_ER4/Full' link mode no longer
being supported, causing a regression on some setups.

Fixes: 5bf01b57 ("mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register")
Signed-off-by: NDanielle Ratson <danieller@nvidia.com>
Reported-by: NEddie Shklaer <eddies@nvidia.com>
Tested-by: NEddie Shklaer <eddies@nvidia.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 824c94cbf4d6050892633a443df9d9cb4f72ad9d
bugzilla: 51348

--------------------------------

commit edcbf513 upstream.

When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.

If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.

Fix this by setting the neighbor's state to permanent, so that it is
always valid.

Fixes: b5b02939 ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test")
Signed-off-by: NDanielle Ratson <danieller@nvidia.com>
Reviewed-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit c1e1a64a23136b47844e71991b3cdd4acb2f57d8
bugzilla: 51348

--------------------------------

commit 7f654157 upstream.

When CONFIG_PM_SLEEP is disabled, the compiler warns about unused
functions:

drivers/net/phy/phy_device.c:273:12: error: unused function 'mdio_bus_phy_suspend' [-Werror,-Wunused-function]
static int mdio_bus_phy_suspend(struct device *dev)
drivers/net/phy/phy_device.c:293:12: error: unused function 'mdio_bus_phy_resume' [-Werror,-Wunused-function]
static int mdio_bus_phy_resume(struct device *dev)

The logic is intentional, so just mark these two as __maybe_unused
and remove the incorrect #ifdef.

Fixes: 4c0d2e96 ("net: phy: consider that suspend2ram may cut off PHY power")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210225145748.404410-1-arnd@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit ad59796872ae3ddf20d4924ab017f99ff19f1507
bugzilla: 51348

--------------------------------

commit a4fc088a upstream.

The command "ethtool -L <intf> combined 0" may clean the RX/TX channel
count and skip the error path, since the attrs
tb[ETHTOOL_A_CHANNELS_RX_COUNT] and tb[ETHTOOL_A_CHANNELS_TX_COUNT]
are NULL in this case when recent ethtool is used.

Tested using ethtool v5.10.

Fixes: 7be92514 ("ethtool: check if there is at least one channel for TX/RX in the core")
Signed-off-by: NYinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NLouis Peens <louis.peens@netronome.com>
Link: https://lore.kernel.org/r/20210225125102.23989-1-simon.horman@netronome.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 482f99d0ad393abede12d3b80fcb5b8900d399d1
bugzilla: 51348

--------------------------------

commit 396e13e1 upstream.

In current driver, buffer2 available only when hardware supports split
header. Wrongly set buffer2 valid in stmmac_rx_refill when refill buffer
address. You can see that desc3 is 0x81000000 after initialization, but
turn out to be 0x83000000 after refill.

Fixes: 67afd6d1 ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: NJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 333dbdee0651d928389a7096c72ad1c8adc624d4
bugzilla: 51348

--------------------------------

commit c511819d upstream.

stmmac_xmit() call stmmac_tx_timer_arm() at the end to modify tx timer to
do the transmission cleanup work. Imagine such a situation, stmmac enters
suspend immediately after tx timer modified, it's expire callback
stmmac_tx_clean() would not be invoked. This could affect BQL, since
netdev_tx_sent_queue() has been called, but netdev_tx_completed_queue()
have not been involved, as a result, dql_avail(&dev_queue->dql) finally
always return a negative value.

__dev_queue_xmit->__dev_xmit_skb->qdisc_run->__qdisc_run->qdisc_restart->dequeue_skb:
	if ((q->flags & TCQ_F_ONETXQUEUE) &&
		netif_xmit_frozen_or_stopped(txq)) // __QUEUE_STATE_STACK_XOFF is set

Net core will stop transmitting any more. Finillay, net watchdong would timeout.
To fix this issue, we should call netdev_tx_reset_queue() in stmmac_resume().

Fixes: 54139cf3 ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: NJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 3c1b58261ff81fba9f6bd8f8d9bcec85920c2ff0
bugzilla: 51348

--------------------------------

commit a3e860a8 upstream.

If clear GMAC_CONFIG_TE bit, it would stop all tx channels, but users
may only want to stop specific tx channel.

Fixes: 48863ce5 ("stmmac: add DMA support for GMAC 4.xx")
Signed-off-by: NJoakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 640492cf1732a9f97b062c3eec2c5ee37f73dada
bugzilla: 51348

--------------------------------

commit dacfc08d upstream.

This was introduced by commit e4ffd066 ("perf: Normalize gcc
parameter when generating arch errno table").

Assuming the first word of $(CC) is the actual compiler breaks usage
like CC="ccache gcc": the script ends up calling ccache directly with
gcc arguments, what fails. Instead of getting the first word, just
remove from $(CC) any word that starts with a "-". This maintains the
spirit of the original patch, while not breaking ccache users.

Fixes: e4ffd066 ("perf: Normalize gcc parameter when generating arch errno table")
Signed-off-by: NAntonio Terceiro <antonio.terceiro@linaro.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210224130046.346977-1-antonio.terceiro@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 8493877b58b6f35d643da307ee1ae920b3ddd1d8
bugzilla: 51348

--------------------------------

commit 41462c6e upstream.

Older libelf.h and glibc elf.h might not yet define the ELF compression
types.

Checking and defining SHF_COMPRESSED fix the build error when compiling
with older toolchains. Also, the tool resolve_btfids is compiled with host
toolchain. The host toolchain is more likely to be older than the cross
compile toolchain.

Fixes: 51f6463a ("tools/resolve_btfids: Fix sections with wrong alignment")
Signed-off-by: NKun-Chuan Hsieh <jetswayss@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210224052752.5284-1-jetswayss@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit ee7eac24b5b495f484034cdb2bd7152edc5a985f
bugzilla: 51348

--------------------------------

commit d785e1fe upstream.

Based on talks and indirect references ixgbe IPsec offlod do not
support IPsec tunnel mode offload. It can only support IPsec transport
mode offload. Now explicitly fail when creating non transport mode SA
with offload to avoid false performance expectations.

Fixes: 63a67fe2 ("ixgbe: add ipsec offload add and remove SA")
Signed-off-by: NAntony Antony <antony@phenome.org>
Acked-by: NShannon Nelson <snelson@pensando.io>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit cab735320fe92b40d1f69b93a20694117aa2d5a5
bugzilla: 51348

--------------------------------

commit abbf9a0e upstream.

The (0xBAF70000 & 0x00FFF000) << 6 should be (0xf70 << 18).

Fixes: 561535b0 ("r8169: fix OCP access on RTL8117")
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Acked-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 84ef8a8cb7894a71f61a46ebdd7bf0c53773cecf
bugzilla: 51348

--------------------------------

commit e7a36d27 upstream.

When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.

Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.

Fixes: 0da9581d ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: NAlexandra Winter <wintera@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 345d90cd741a6b0c5d98920ee1c6fc6549dc0415
bugzilla: 51348

--------------------------------

commit 179d0ba0 upstream.

When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.

Fixes: 194ccc88 ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: NTOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 4f8e71a770dd460c9e8ac40baceefef6d8853b13
bugzilla: 51348

--------------------------------

commit 29d98f54 upstream.

The txtime is passed to the driver in skb->skb_mstamp_ns, which is
actually in a union with skb->tstamp (the place where software
timestamps are kept).

Since commit b50a5c70 ("net: allow simultaneous SW and HW transmit
timestamping"), __sock_recv_timestamp has some logic for making sure
that the two calls to skb_tstamp_tx:

skb_tx_timestamp(skb) # Software timestamp in the driver
-> skb_tstamp_tx(skb, NULL)

and

skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver

will both do the right thing and in a race-free manner, meaning that
skb_tx_timestamp will deliver a cmsg with the software timestamp only,
and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg
with the hardware timestamp only.

Why are races even possible? Well, because although the software timestamp
skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb)
lives in skb_shinfo(skb), an area which is shared between skbs and their
clones. And skb_tstamp_tx works by cloning the packets when timestamping
them, therefore attempting to perform hardware timestamping on an skb's
clone will also change the hardware timestamp of the original skb. And
the original skb might have been yet again cloned for software
timestamping, at an earlier stage.

So the logic in __sock_recv_timestamp can't be as simple as saying
"does this skb have a hardware timestamp? if yes I'll send the hardware
timestamp to the socket, otherwise I'll send the software timestamp",
precisely because the hardware timestamp is shared.
Instead, it's quite the other way around: __sock_recv_timestamp says
"does this skb have a software timestamp? if yes, I'll send the software
timestamp, otherwise the hardware one". This works because the software
timestamp is not shared with clones.

But that means we have a problem when we attempt hardware timestamping
with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp
will say "oh, yeah, this must be some sort of odd clone" and will not
deliver the hardware timestamp to the socket. And this is exactly what
is happening when we have txtime enabled on the socket: as mentioned,
that is put in a union with skb->tstamp, so it is quite easy to mistake
it.

Do what other drivers do (intel igb/igc) and write zero to skb->tstamp
before taking the hardware timestamp. It's of no use to us now (we're
already on the TX confirmation path).

Fixes: 0d08c9ec ("enetc: add support time specific departure base on the qos etf")
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 4fd0654b8f2129b68203974ddee15f804ec011c2
bugzilla: 51348

--------------------------------

commit cf9e60aa upstream.

We must disable the regulator that was enabled in the probe function.

Fixes: 7994fe55 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit e334c401f3fc9fdf2321e14a5204d591a0713e7f
bugzilla: 51348

--------------------------------

commit ac88c531 upstream.

When the probe fails or requests to be defered, we must disable the
regulator that was previously enabled.

Fixes: 7994fe55 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 6342ccdfdf2bfb47e80037508dc75bd4e7ace184
bugzilla: 51348

--------------------------------

commit f7d9d485 upstream.

For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.

In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.

If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"

To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".

We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NXie He <xie.he.0141@gmail.com>
Acked-by: NMartin Schiller <ms@dev.tdt.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 9c4136081cc2076ca981e68001b3cb8f53800a94
bugzilla: 51348

--------------------------------

commit 8eb37ab7 upstream.

Issue seen when enumerating multiple Intel mGbE interfaces in EHL.

[    6.898141] intel-eth-pci 0000:00:1d.2: enabling device (0000 -> 0002)
[    6.900971] intel-eth-pci 0000:00:1d.2: Fail to register stmmac-clk
[    6.906434] intel-eth-pci 0000:00:1d.2: User ID: 0x51, Synopsys ID: 0x52

We fix it by making the clock name to be unique following the format
of stmmac-pci_name(pci_dev) so that we can differentiate the clock for
these Intel mGbE interfaces in EHL platform as follow:

  /sys/kernel/debug/clk/stmmac-0000:00:1d.1
  /sys/kernel/debug/clk/stmmac-0000:00:1d.2
  /sys/kernel/debug/clk/stmmac-0000:00:1e.4

Fixes: 58da0cfa ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: NWong Vee Khee <vee.khee.wong@intel.com>
Signed-off-by: NVoon Weifeng <weifeng.voon@intel.com>
Co-developed-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit d78f23ef304060608bc9b1627f303842f75d7029
bugzilla: 51348

--------------------------------

commit 9a7b3950 upstream.

For Intel mGbE controller, MAC VLAN filter delete operation will time-out
if serdes power-down sequence happened first during driver remove() with
below message.

[82294.764958] intel-eth-pci 0000:00:1e.4 eth2: stmmac_dvr_remove: removing driver
[82294.778677] intel-eth-pci 0000:00:1e.4 eth2: Timeout accessing MAC_VLAN_Tag_Filter
[82294.779997] intel-eth-pci 0000:00:1e.4 eth2: failed to kill vid 0081/0
[82294.947053] intel-eth-pci 0000:00:1d.2 eth1: stmmac_dvr_remove: removing driver
[82295.002091] intel-eth-pci 0000:00:1d.1 eth0: stmmac_dvr_remove: removing driver

Therefore, we delay the serdes power-down to be after unregister_netdev()
which triggers the VLAN filter delete.

Fixes: b9663b7c ("net: stmmac: Enable SERDES power up/down sequence")
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 85178d76febd30a745b7d947dbd9751919d0fa5b
bugzilla: 51348

--------------------------------

commit ad5d07f4 upstream.

The current CIPSO and CALIPSO refcounting scheme for the DOI
definitions is a bit flawed in that we:

1. Don't correctly match gets/puts in netlbl_cipsov4_list().
2. Decrement the refcount on each attempt to remove the DOI from the
   DOI list, only removing it from the list once the refcount drops
   to zero.

This patch fixes these problems by adding the missing "puts" to
netlbl_cipsov4_list() and introduces a more conventional, i.e.
not-buggy, refcounting mechanism to the DOI definitions.  Upon the
addition of a DOI to the DOI list, it is initialized with a refcount
of one, removing a DOI from the list removes it from the list and
drops the refcount by one; "gets" and "puts" behave as expected with
respect to refcounts, increasing and decreasing the DOI's refcount by
one.

Fixes: b1edeb10 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
Fixes: d7cce015 ("netlabel: Add support for removing a CALIPSO DOI.")
Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com
Signed-off-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit e03ed1190d56f983c582c0853499d4c3a2cfa410
bugzilla: 51348

--------------------------------

commit 863a42b2 upstream.

Init the u64 stats in order to avoid the lockdep prints on the 32bit
hardware like

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 0 PID: 4695 Comm: syz-executor.0 Not tainted 5.11.0-rc5-syzkaller #0
 Hardware name: ARM-Versatile Express
 Backtrace:
 [<826fc5b8>] (dump_backtrace) from [<826fc82c>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
 [<826fc814>] (show_stack) from [<8270d1f8>] (__dump_stack lib/dump_stack.c:79 [inline])
 [<826fc814>] (show_stack) from [<8270d1f8>] (dump_stack+0xa8/0xc8 lib/dump_stack.c:120)
 [<8270d150>] (dump_stack) from [<802bf9c0>] (assign_lock_key kernel/locking/lockdep.c:935 [inline])
 [<8270d150>] (dump_stack) from [<802bf9c0>] (register_lock_class+0xabc/0xb68 kernel/locking/lockdep.c:1247)
 [<802bef04>] (register_lock_class) from [<802baa2c>] (__lock_acquire+0x84/0x32d4 kernel/locking/lockdep.c:4711)
 [<802ba9a8>] (__lock_acquire) from [<802be840>] (lock_acquire.part.0+0xf0/0x554 kernel/locking/lockdep.c:5442)
 [<802be750>] (lock_acquire.part.0) from [<802bed10>] (lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5415)
 [<802beca4>] (lock_acquire) from [<81560548>] (seqcount_lockdep_reader_access include/linux/seqlock.h:103 [inline])
 [<802beca4>] (lock_acquire) from [<81560548>] (__u64_stats_fetch_begin include/linux/u64_stats_sync.h:164 [inline])
 [<802beca4>] (lock_acquire) from [<81560548>] (u64_stats_fetch_begin include/linux/u64_stats_sync.h:175 [inline])
 [<802beca4>] (lock_acquire) from [<81560548>] (nsim_get_stats64+0xdc/0xf0 drivers/net/netdevsim/netdev.c:70)
 [<8156046c>] (nsim_get_stats64) from [<81e2efa0>] (dev_get_stats+0x44/0xd0 net/core/dev.c:10405)
 [<81e2ef5c>] (dev_get_stats) from [<81e53204>] (rtnl_fill_stats+0x38/0x120 net/core/rtnetlink.c:1211)
 [<81e531cc>] (rtnl_fill_stats) from [<81e59d58>] (rtnl_fill_ifinfo+0x6d4/0x148c net/core/rtnetlink.c:1783)
 [<81e59684>] (rtnl_fill_ifinfo) from [<81e5ceb4>] (rtmsg_ifinfo_build_skb+0x9c/0x108 net/core/rtnetlink.c:3798)
 [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo_event net/core/rtnetlink.c:3830 [inline])
 [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo_event net/core/rtnetlink.c:3821 [inline])
 [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo+0x44/0x70 net/core/rtnetlink.c:3839)
 [<81e5d068>] (rtmsg_ifinfo) from [<81e45c2c>] (register_netdevice+0x664/0x68c net/core/dev.c:10103)
 [<81e455c8>] (register_netdevice) from [<815608bc>] (nsim_create+0xf8/0x124 drivers/net/netdevsim/netdev.c:317)
 [<815607c4>] (nsim_create) from [<81561184>] (__nsim_dev_port_add+0x108/0x188 drivers/net/netdevsim/dev.c:941)
 [<8156107c>] (__nsim_dev_port_add) from [<815620d8>] (nsim_dev_port_add_all drivers/net/netdevsim/dev.c:990 [inline])
 [<8156107c>] (__nsim_dev_port_add) from [<815620d8>] (nsim_dev_probe+0x5cc/0x750 drivers/net/netdevsim/dev.c:1119)
 [<81561b0c>] (nsim_dev_probe) from [<815661dc>] (nsim_bus_probe+0x10/0x14 drivers/net/netdevsim/bus.c:287)
 [<815661cc>] (nsim_bus_probe) from [<811724c0>] (really_probe+0x100/0x50c drivers/base/dd.c:554)
 [<811723c0>] (really_probe) from [<811729c4>] (driver_probe_device+0xf8/0x1c8 drivers/base/dd.c:740)
 [<811728cc>] (driver_probe_device) from [<81172fe4>] (__device_attach_driver+0x8c/0xf0 drivers/base/dd.c:846)
 [<81172f58>] (__device_attach_driver) from [<8116fee0>] (bus_for_each_drv+0x88/0xd8 drivers/base/bus.c:431)
 [<8116fe58>] (bus_for_each_drv) from [<81172c6c>] (__device_attach+0xdc/0x1d0 drivers/base/dd.c:914)
 [<81172b90>] (__device_attach) from [<8117305c>] (device_initial_probe+0x14/0x18 drivers/base/dd.c:961)
 [<81173048>] (device_initial_probe) from [<81171358>] (bus_probe_device+0x90/0x98 drivers/base/bus.c:491)
 [<811712c8>] (bus_probe_device) from [<8116e77c>] (device_add+0x320/0x824 drivers/base/core.c:3109)
 [<8116e45c>] (device_add) from [<8116ec9c>] (device_register+0x1c/0x20 drivers/base/core.c:3182)
 [<8116ec80>] (device_register) from [<81566710>] (nsim_bus_dev_new drivers/net/netdevsim/bus.c:336 [inline])
 [<8116ec80>] (device_register) from [<81566710>] (new_device_store+0x178/0x208 drivers/net/netdevsim/bus.c:215)
 [<81566598>] (new_device_store) from [<8116fcb4>] (bus_attr_store+0x2c/0x38 drivers/base/bus.c:122)
 [<8116fc88>] (bus_attr_store) from [<805b4b8c>] (sysfs_kf_write+0x48/0x54 fs/sysfs/file.c:139)
 [<805b4b44>] (sysfs_kf_write) from [<805b3c90>] (kernfs_fop_write_iter+0x128/0x1ec fs/kernfs/file.c:296)
 [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (call_write_iter include/linux/fs.h:1901 [inline])
 [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (new_sync_write fs/read_write.c:518 [inline])
 [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (vfs_write+0x3dc/0x57c fs/read_write.c:605)
 [<804d1f20>] (vfs_write) from [<804d2604>] (ksys_write+0x68/0xec fs/read_write.c:658)
 [<804d259c>] (ksys_write) from [<804d2698>] (__do_sys_write fs/read_write.c:670 [inline])
 [<804d259c>] (ksys_write) from [<804d2698>] (sys_write+0x10/0x14 fs/read_write.c:667)
 [<804d2688>] (sys_write) from [<80200060>] (ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64)

Fixes: 83c9e13a ("netdevsim: add software driver for testing offloads")
Reported-by: syzbot+e74a6857f2d0efe3ad81@syzkaller.appspotmail.com
Tested-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 6ed0a2cafd1f08a243123df094aa8479590112bf
bugzilla: 51348

--------------------------------

commit 6c59cff3 upstream.

There's no reason for preventing the creation and removal
of qmimux network interfaces when the underlying interface
is up.

This makes qmi_wwan mux implementation more similar to the
rmnet one, simplifying userspace management of the same
logical interfaces.

Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
Reported-by: NAleksander Morgado <aleksander@aleksander.es>
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 565b2d3ae20256be43df960206cdd1d8d479c325
bugzilla: 51348

--------------------------------

commit 053d8ad1 upstream.

When using MLO_AN_PHY or MLO_AN_FIXED, the MII_BMCR of the SGMII PCS is
read before resetting the switch so it can be reprogrammed afterwards.
This works for the speeds of 1Gbps and 100Mbps, but not for 10Mbps,
because SPEED_10 is actually 0, so AND-ing anything with 0 is false,
therefore that last branch is dead code.

Do what others do (genphy_read_status_fixed, phy_mii_ioctl) and just
remove the check for SPEED_10, let it fall into the default case.

Fixes: ffe10e67 ("net: dsa: sja1105: Add support for the SGMII port")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 719611e806deea598088541bd4509a3735d29c92
bugzilla: 51348

--------------------------------

commit f1becbed upstream.

An attempt is made to warn the user about the fact that VCAP IS1 cannot
offload keys matching on destination IP (at least given the current half
key format), but sadly that warning fails miserably in practice, due to
the fact that it operates on an uninitialized "match" variable. We must
first decode the keys from the flow rule.

Fixes: 75944fda ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1")
Reported-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 2809a5ca962e96397d9504414a1140a69fe5e138
bugzilla: 51348

--------------------------------

commit bfc25605 upstream.

This is a follow up of commit ea327469 ("net: sched: avoid
duplicates in qdisc dump") which has fixed the issue only for the qdisc
dump.

The duplicate printing also occurs when dumping the classes via
  tc class show dev eth0

Fixes: 59cc1f61 ("net: sched: convert qdisc linked list to hashtable")
Signed-off-by: NMaximilian Heyne <mheyne@amazon.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 9c61f1e1c40e85e5db4154eba36711d166a38d34
bugzilla: 51348

--------------------------------

commit 76c03bf8 upstream.

As far as user space is concerned, blackhole nexthops do not have a
nexthop device and therefore should not be affected by the
administrative or carrier state of any netdev.

However, when the loopback netdev goes down all the blackhole nexthops
are flushed. This happens because internally the kernel associates
blackhole nexthops with the loopback netdev.

This behavior is both confusing to those not familiar with kernel
internals and also diverges from the legacy API where blackhole IPv4
routes are not flushed when the loopback netdev goes down:

 # ip route add blackhole 198.51.100.0/24
 # ip link set dev lo down
 # ip route show 198.51.100.0/24
 blackhole 198.51.100.0/24

Blackhole IPv6 routes are flushed, but at least user space knows that
they are associated with the loopback netdev:

 # ip -6 route show 2001:db8:1::/64
 blackhole 2001:db8:1::/64 dev lo metric 1024 pref medium

Fix this by only flushing blackhole nexthops when the loopback netdev is
unregistered.

Fixes: ab84be7e ("net: Initial nexthop code")
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reported-by: NDonald Sharp <sharpd@nvidia.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 87b7b19d6e1dabbd12344b2784b78ea8b4992f6f
bugzilla: 51348

--------------------------------

commit 879c348c upstream.

We introduce dwmac410_dma_init_channel() here for both EQoS v4.10 and
above which use different DMA_CH(n)_Interrupt_Enable bit definitions for
NIE and AIE.

Fixes: 48863ce5 ("stmmac: add DMA support for GMAC 4.xx")
Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: NRamesh Babu B <ramesh.babu.b@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 6b0d3ae1051bdca4acf91a66be64d42d1c0f577b
bugzilla: 51348

--------------------------------

commit 00ff801b upstream.

This patch fixes a bug that the moderation config will not be
applied when calling mlx4_en_reset_config. For example, when
turning on rx timestamping, mlx4_en_reset_config() will be called,
causing the NIC to forget previous moderation config.

This fix is in phase with a previous fix:
commit 79c54b6b ("net/mlx4_en: Fix TX moderation info loss
after set_ringparam is called")

Tested: Before this patch, on a host with NIC using mlx4, run
netserver and stream TCP to the host at full utilization.
$ sar -I SUM 1
                 INTR    intr/s
14:03:56          sum  48758.00

After rx hwtstamp is enabled:
$ sar -I SUM 1
14:10:38          sum 317771.00
We see the moderation is not working properly and issued 7x more
interrupts.

After the patch, and turned on rx hwtstamp, the rate of interrupts
is as expected:
$ sar -I SUM 1
14:52:11          sum  49332.00

Fixes: 79c54b6b ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called")
Signed-off-by: NKevin(Yudong) Yang <yyd@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NNeal Cardwell <ncardwell@google.com>
CC: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit fa0bc09db49bf4875d9a8c88813fe2b87c1059bb
bugzilla: 51348

--------------------------------

commit 95b39f07 upstream.

mtk_star_dma_unmap_rx() should unmap the dma_addr of old skb rather than
that of new skb.
Assign new_dma_addr to desc_data.dma_addr after all handling of old skb
ends to avoid unexpected receive side error.

Fixes: f96e9641 ("net: ethernet: mtk-star-emac: fix error path in RX handling")
Signed-off-by: NBiao Huang <biao.huang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.24
commit 1cdd008902d4e32f270e8fdb3239db6412f0a90b
bugzilla: 51348

--------------------------------

commit 3a5d12c9 upstream.

The RX rings have a producer index owned by hardware, where newly
received frame buffers are placed, and a consumer index owned by
software, where newly allocated buffers are placed, in expectation of
hardware being able to place frame data in them.

Hardware increments the producer index when a frame is received, however
it is not allowed to increment the producer index to match the consumer
index (RBCIR) since the ring can hold at most RBLENR[LENGTH]-1 received
BDs. Whenever the producer index matches the value of the consumer
index, the ring has no unprocessed received frames and all BDs in the
ring have been initialized/prepared by software, i.e. hardware owns all
BDs in the ring.

The code uses the next_to_clean variable to keep track of the producer
index, and the next_to_use variable to keep track of the consumer index.

The RX rings are seeded from enetc_refill_rx_ring, which is called from
two places:

1. initially the ring is seeded until full with enetc_bd_unused(rx_ring),
   i.e. with 511 buffers. This will make next_to_clean=0 and next_to_use=511:

.ndo_open
-> enetc_open
   -> enetc_setup_bdrs
      -> enetc_setup_rxbdr
         -> enetc_refill_rx_ring

2. then during the data path processing, it is refilled with 16 buffers
   at a time:

enetc_msix
-> napi_schedule
   -> enetc_poll
      -> enetc_clean_rx_ring
         -> enetc_refill_rx_ring

There is just one problem: the initial seeding done during .ndo_open
updates just the producer index (ENETC_RBPIR) with 0, and the software
next_to_clean and next_to_use variables. Notably, it will not update the
consumer index to make the hardware aware of the newly added buffers.

Wait, what? So how does it work?

Well, the reset values of the producer index and of the consumer index
of a ring are both zero. As per the description in the second paragraph,
it means that the ring is full of buffers waiting for hardware to put
frames in them, which by coincidence is almost true, because we have in
fact seeded 511 buffers into the ring.

But will the hardware attempt to access the 512th entry of the ring,
which has an invalid BD in it? Well, no, because in order to do that, it
would have to first populate the first 511 entries, and the NAPI
enetc_poll will kick in by then. Eventually, after 16 processed slots
have become available in the RX ring, enetc_clean_rx_ring will call
enetc_refill_rx_ring and then will [ finally ] update the consumer index
with the new software next_to_use variable. From now on, the
next_to_clean and next_to_use variables are in sync with the producer
and consumer ring indices.

So the day is saved, right? Well, not quite. Freeing the memory
allocated for the rings is done in:

enetc_close
-> enetc_clear_bdrs
   -> enetc_clear_rxbdr
      -> this just disables the ring
-> enetc_free_rxtx_rings
   -> enetc_free_rx_ring
      -> sets next_to_clean and next_to_use to 0

but again, nothing is committed to the hardware producer and consumer
indices (yay!). The assumption is that the ring is disabled, so the
indices don't matter anyway, and it's the responsibility of the "open"
code path to set those up.

.. Except that the "open" code path does not set those up properly.

While initially, things almost work, during subsequent enetc_close ->
enetc_open sequences, we have problems. To be precise, the enetc_open
that is subsequent to enetc_close will again refill the ring with 511
entries, but it will leave the consumer index untouched. Untouched
means, of course, equal to the value it had before disabling the ring
and draining the old buffers in enetc_close.

But as mentioned, enetc_setup_rxbdr will at least update the producer
index though, through this line of code:

	enetc_rxbdr_wr(hw, idx, ENETC_RBPIR, 0);

so at this stage we'll have:

next_to_clean=0 (in hardware 0)
next_to_use=511 (in hardware we'll have the refill index prior to enetc_close)

Again, the next_to_clean and producer index are in sync and set to
correct values, so the driver manages to limp on. Eventually, 16 ring
entries will be consumed by enetc_poll, and the savior
enetc_clean_rx_ring will come and call enetc_refill_rx_ring, and then
update the hardware consumer ring based upon the new next_to_use.

So.. it works?
Well, by coincidence, it almost does, but there's a circumstance where
enetc_clean_rx_ring won't be there to save us. If the previous value of
the consumer index was 15, there's a problem, because the NAPI poll
sequence will only issue a refill when 16 or more buffers have been
consumed.

It's easiest to illustrate this with an example:

ip link set eno0 up
ip addr add 192.168.100.1/24 dev eno0
ping 192.168.100.1 -c 20 # ping this port from another board
ip link set eno0 down
ip link set eno0 up
ping 192.168.100.1 -c 20 # ping it again from the same other board

One by one:

1. ip link set eno0 up
-> calls enetc_setup_rxbdr:
   -> calls enetc_refill_rx_ring(511 buffers)
   -> next_to_clean=0 (in hw 0)
   -> next_to_use=511 (in hw 0)

2. ping 192.168.100.1 -c 20 # ping this port from another board
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=1 next_to_clean 0 (in hw 1) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=2 next_to_clean 1 (in hw 2) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=3 next_to_clean 2 (in hw 3) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=4 next_to_clean 3 (in hw 4) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=5 next_to_clean 4 (in hw 5) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=6 next_to_clean 5 (in hw 6) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=7 next_to_clean 6 (in hw 7) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=8 next_to_clean 7 (in hw 8) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=9 next_to_clean 8 (in hw 9) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=10 next_to_clean 9 (in hw 10) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=11 next_to_clean 10 (in hw 11) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=12 next_to_clean 11 (in hw 12) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=13 next_to_clean 12 (in hw 13) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=14 next_to_clean 13 (in hw 14) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=15 next_to_clean 14 (in hw 15) next_to_use 511 (in hw 0)
enetc_clean_rx_ring: enetc_refill_rx_ring(16) increments next_to_use by 16 (mod 512) and writes it to hw
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=0 next_to_clean 15 (in hw 16) next_to_use 15 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=1 next_to_clean 16 (in hw 17) next_to_use 15 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=2 next_to_clean 17 (in hw 18) next_to_use 15 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=3 next_to_clean 18 (in hw 19) next_to_use 15 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=4 next_to_clean 19 (in hw 20) next_to_use 15 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=5 next_to_clean 20 (in hw 21) next_to_use 15 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=6 next_to_clean 21 (in hw 22) next_to_use 15 (in hw 15)

20 packets transmitted, 20 packets received, 0% packet loss

3. ip link set eno0 down
enetc_free_rx_ring: next_to_clean 0 (in hw 22), next_to_use 0 (in hw 15)

4. ip link set eno0 up
-> calls enetc_setup_rxbdr:
   -> calls enetc_refill_rx_ring(511 buffers)
   -> next_to_clean=0 (in hw 0)
   -> next_to_use=511 (in hw 15)

5. ping 192.168.100.1 -c 20 # ping it again from the same other board
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=1 next_to_clean 0 (in hw 1) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=2 next_to_clean 1 (in hw 2) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=3 next_to_clean 2 (in hw 3) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=4 next_to_clean 3 (in hw 4) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=5 next_to_clean 4 (in hw 5) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=6 next_to_clean 5 (in hw 6) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=7 next_to_clean 6 (in hw 7) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=8 next_to_clean 7 (in hw 8) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=9 next_to_clean 8 (in hw 9) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=10 next_to_clean 9 (in hw 10) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=11 next_to_clean 10 (in hw 11) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=12 next_to_clean 11 (in hw 12) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=13 next_to_clean 12 (in hw 13) next_to_use 511 (in hw 15)
enetc_clean_rx_ring: rx_frm_cnt=1 cleaned_cnt=14 next_to_clean 13 (in hw 14) next_to_use 511 (in hw 15)

20 packets transmitted, 12 packets received, 40% packet loss

And there it dies. No enetc_refill_rx_ring (because cleaned_cnt must be equal
to 15 for that to happen), no nothing. The hardware enters the condition where
the producer (14) + 1 is equal to the consumer (15) index, which makes it
believe it has no more free buffers to put packets in, so it starts discarding
them:

ip netns exec ns0 ethtool -S eno0 | grep -v ': 0'
NIC statistics:
     Rx ring  0 discarded frames: 8

Summarized, if the interface receives between 16 and 32 (mod 512) frames
and then there is a link flap, then the port will eventually die with no
way to recover. If it receives less than 16 (mod 512) frames, then the
initial NAPI poll [ before the link flap ] will not update the consumer
index in hardware (it will remain zero) which will be ok when the buffers
are later reinitialized. If more than 32 (mod 512) frames are received,
the initial NAPI poll has the chance to refill the ring twice, updating
the consumer index to at least 32. So after the link flap, the consumer
index is still wrong, but the post-flap NAPI poll gets a chance to
refill the ring once (because it passes through cleaned_cnt=15) and
makes the consumer index be again back in sync with next_to_use.

The solution to this problem is actually simple, we just need to write
next_to_use into the hardware consumer index at enetc_open time, which
always brings it back in sync after an initial buffer seeding process.

The simpler thing would be to put the write to the consumer index into
enetc_refill_rx_ring directly, but there are issues with the MDIO
locking: in the NAPI poll code we have the enetc_lock_mdio() taken from
top-level and we use the unlocked enetc_wr_reg_hot, whereas in
enetc_open, the enetc_lock_mdio() is not taken at the top level, but
instead by each individual enetc_wr_reg, so we are forced to put an
additional enetc_wr_reg in enetc_setup_rxbdr. Better organization of
the code is left as a refactoring exercise.

Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>