BugLink: https://bugs.launchpad.net/bugs/418627

The original reporter states that this quirk is necessary to obtain
reasonable gain for playback.  Without it, sound is inaudible.  Tested
with playback (spkr and hp) and capture.
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The pin config provided by BIOS have some problems:
0x0221401f: [Jack] HP Out at Ext Front  <-- other association and sequence
0x02a19020: [Jack] Mic at Ext Front     <-- other association
0x01113014: [Jack] Speaker at Ext Rear  <-- line out (not speaker)
0x01114010: [Jack] Speaker at Ext Rear  <-- line out
0x01a19030: [Jack] Mic at Ext Rear      <-- other association
0x01111012: [Jack] Speaker at Ext Rear  <-- line out
0x01116011: [Jack] Speaker at Ext Rear  <-- line out
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x40f000f0: [N/A] Other at Ext N/A
0x01451140: [Jack] SPDIF Out at Ext Rear
0x40f000f0: [N/A] Other at Ext N/A

just overwrite it.
Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For codecs without EPSS support (G45/IbexPeak), the hotplug event will
be lost if the HDA is powered off during the time. After that the pin
presence detection verb returns inaccurate info.

So always power-on HDA link for !EPSS codecs.

KarL offers the fact and Takashi recommends to flag hda_bus. Thanks!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

IbexPeak is the first Intel HDMI audio codec to support channel mapping.

Currently the outstanding problem is, the HDMI channel order do not
agree with that of ALSA.  This patch presents workaround for some
typical use cases. It gives priority to the typical ALSA surround
configurations, and defines channel mapping for them.

We may need better kernel+userspace interactive channel mapping scheme.
For example, in current scheme if user plays with the surround50 device,
the kernel is unaware of this and will still select the surround41
channel allocation and channel mapping..

Thanks to Marcin for offering good tips!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA036-A specifies that the Audio Sample Packet (ASP) Channel Mapping
verbs apply to Digital Display Pin Complex instead of Converter.

With this fix, channel mapping is working as expected for IbexPeak.

Thanks to Marcin for pointing this out!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA036 spec states:
  DP (Display Port) indicates whether the Pin Complex Widget supports
  connection to a Display Port sink.  Supported if set to 1. Note that
  it is possible for the pin widget to support more than one digital
  display connection type, e.g. HDMI and DP bit are both set to 1.

Also export the DP pin cap in procfs.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Note that the HBR capability only applies to HDMI pin.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fixes an error in processing of the HP BIOS configuration to enable
GPIO based mute LED indicator control. That error causes driver to enable
such control on all HP systems with the 92HD75 IDT codecs and results in
unnecessary toggling of the GPIO on mute control manipulation.

It also adds support of the future HP BIOS configuration extension for the
named control. New configuration string has a format HP_Mute_LED_P_G
where P can be 0 or 1 and defines mute LED GPIO control state (low/high)
that corresponds to the NOT muted state of the master volume
and G is the index of the GPIO to use (0..9)

Lastly, it adds more systems to the support of the audio implementation
as found on HP B-series systems
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Quirk for the ALC662 found on the Intel D945GCLF2 (and possibly other)
mainboards.
Signed-off-by: NDavid Santinoli <david@santinoli.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Confirmed from vendor and tests in RedHat bugzilla #536782 .
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just to save some time, add direct git link to grub hda-analyzer
Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a flag to spec field so that the EAPD inversion can be checked
outside the relevant control callbacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On Realtek codecs, a digital mic pin is connected often only to a single
ADC.  But the parser tries to set up all ADCs no matter whether the
digital mic is available, and results in non-selectable input source.

This patch adds a check of input-source availability of each ADC, and
excludes ones that don't support all input sources.

Reference: Novell bnc#561235
	http://bugzilla.novell.com/show_bug.cgi?id=561235Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Realtek codecs may have "PCM" and "Line-Out" playback switches, and
they can be slaves for vmaster.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is an updated patch for the Apple iMac 9,1 model to add sound.
Original patch posted here:
http://article.gmane.org/gmane.linux.alsa.devel/61361/match=

I have been using this patch for a while now
and have to say it works vary well, except for a few minor 
things:

	With the iMac 24-inch 3.06GHz Intel Core 2 Duo
	everything seems to be working as it should,
        although I have not looked into the microphone
	(never really use one, nor have any apps to test,
	my guess is it doesn't work, or I never figured out how
	to get it to work).

	With the iMac 24-inch 2.66GHz Intel Core 2 Duo
	everything is the same as with the above machine 
	except I'm hearing a light scratchy/distortion noise
	come out of the speakers when using headphones(above machine
	does not do this).

Other than that the sound level is great(especially with good Dj headphones).
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Tested-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous hack for replacing the codec name give memory leaks at
error paths.  This patch fixes them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed List:
   1. Add alc_read_coef_idx function
   2. Add ALC661 ALC259
   3. Add ALC892 ALC888VD
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HP dv3 requires position_fix=1.

Reference: Novell bnc#555935
	https://bugzilla.novell.com/show_bug.cgi?id=555935Signed-off-by: NTakashi Iwai <tiwai@suse.de>

FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and
speaker pins properly.  Add the pinfix entry for that.

Reference: Novell bnc#557403
	https://bugzilla.novell.com/show_bug.cgi?id=557403Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The NID 0x1a of Conexant 5047 chip is a mic boost volume only with
the output amp unlike 5045 chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

MSI Wind U115 seems to require position_fix=1 explicitly.
Otherwise it screws up PulseAudio.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

STAC/IDT codecs seem to behave weird when SET_PIN_SENSE verb is issued
before reading the jack-detection although the TRIG_REQ pin capability
is given by the hardware.

Since snd_hda_jack_detect() issues the SET_PIN_SENSE verb simply judging
from the pincap, we have to revert the change in the commit
  d56757ab
    ALSA: hda - Replace the rest of jack-detections with snd_hda_jack_detect()
to plain GET_PIN_SENSE verb without triggering.
Reported-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4792

Cristian reported that these models have really bad sound above 6 dB
and proposed the original patch. I've updated the comment to reflect
this change.
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Reported-by: Cristian Klein
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell Vostro 1015n uses Conexant CX20583-10Z (0x14f1:5067). Patch is
based on "olpc-xo-1_5" branch. Dell uses digital mic.
Signed-off-by: NEinar Rünkaru <einarry@smail.ee>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit f2624791.

Łukasz Wojniłowicz reported that the change causes both internal and
external mics not working any more.  The headphone jacking issue was
fixed by his previous patch, it's better to revert to acer-aspire-4930g
model.
Reported-by: NŁukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CONFIG_SND_JACK needs to be selected explicitly only when INPUT=y or
INPUT_SND.  The current way, INPUT=SND_HDA_INTEL isn't strict enough.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixes first issue from comment 0021423 in bug 0004317 for Acer Aspire 5930g
Signed-off-by: NŁukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the quirk for Acer Aspire 5930G from model=acer-aspire-4930g to
model=acer-aspre-6530g.  The tuba bass gets muted along with the other
built-in speakers upon headphones insertion, the internal mic works
perfectly etc.
Reported-by: NClaudio Viano <claudio.viano@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The mute-LED isn't synchronized with the actual mute state on some
HP laptops with IDT 92HD83xxx codecs.  A similar hack using
check_power_status callback is added for this codec, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The dual-headphone mode with STAC/IDT codecs is useful only for machines
that have two (or more) built-in headphones.

But, some HP laptops give multiple headphone pin configs, one for the
built-in and another for the separate (likely a docking station) one.
This results in a missing speaker volume control.

This patch adds more check for the dual-headphone mode to avoid this
problem.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't change channel count if not necessary.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We tracked down the first-0.5s-hdmi-audio-samples-lost problem to the
AC_VERB_SET_CHANNEL_STREAMID command. It is suspected that many HDMI
sinks need some time to adapt to the new state.

The workaround is to avoid changing stream id/format whenever possible.
Proposed by David.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remember the active infoframe, so as to avoid stop/restart infoframe
transmission when switching between audio clips of the same format.

Proposed by Shang and David.

CC: Shane W <shane-alsa@csy.ca>
CC: David Härdeman <david@hardeman.nu>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

And make it right when called for more than one times.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This avoids lost of presence info on module reloading.
The presence info used to be only updated at the (rare) hotplug events.

Proposed by David, thanks!

CC: David Härdeman <david@hardeman.nu>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This helps merge duplicate code.

v2: add snd_hda_jack_detect() and comments recommended by Takashi.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>