Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

From DCB 4.1 spec.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Differences from GM10x:
- GM20x LTC count detection differs from GM10x
- GM20x init doesn't require large page size setting
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

resman and nvgpu both do this, presumably for good reason.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GM20x doesn't require the priv ring timeout bumps that GK/GM10x have.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Should be no functional change here.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Commit 69c49382 ("drm/nouveau/instmem/gk20a: use direct CPU access")
tried to be smart while using the DMA-API by managing the CPU mappings of
buffers allocated with the DMA-API by itself. In doing so, it relied
on dma_to_phys() which is an architecture-private function not
available everywhere. This broke the build on several architectures.

Since there is no reliable and portable way to obtain the physical
address of a DMA-API buffer, stop trying to be smart and just use the
CPU mapping that the DMA-API can provide. This means that buffers will
be CPU-mapped for all their life as opposed to when we need them, but
anyway using the DMA-API here is a fallback for when no IOMMU is
available so we should not expect optimal behavior.

This makes the IOMMU and DMA-API implementations of instmem diverge
enough that we should maybe put them into separate files...
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The LRU list used for recycling CPU mappings was handling concurrency
very poorly. For instance, if an instobj was acquired twice before being
released once, it would end up into the LRU list even though there is
still a client accessing it.

This patch fixes this by properly counting how many clients are
currently using a given instobj.

While at it, we also raise errors when inconsistencies are detected, and
factorize some code.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This patch is needed by initramfs tools to detect
the required firmware files for the module.

This patch tests for either TEGRA_124_SOC or TEGRA_132_SOC
for the firmwares related to the Tegra K1 generation.

v2: move the MODULE_FIRMWARE to the nvidia_platform.c file.
 This will avoid to test for NOUVEAU_PLATFORM_DRIVER
Signed-off-by: NNicolas Chauvet <kwizart@gmail.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The offset should be 8 on Kepler and later.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Very rough, no idea how correct it is at this point, but it prevents
getteximage-depth from piglit from hanging the GPU.

v2: updated with NV_PCE_FE_LAUNCHERR_REPORT values provided by NVIDIA
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Similar in spirit to the gk104 fix with a similar title.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The CPU-side tracking of engine runlists was not protected by a lock,
leading to list corruption, eventually causing runlist_update() to
overrun the GPU-side runlist, triggering an OOPS.

Fixes some of the issues noticed during parallel piglit runs.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We want to unlock nv_devices_mutex in this error path as well.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some Fermi's apparently alow allow 297MHz clocks, so create a parameter
which allows end-users to set it themselves until we have a reliable way
to determine the board's maximum pixel clocks.
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Without this patch a pixel clock rate above 165 MHz on a TMDS link is
assumed to be dual link. This is true for DVI, but not for HDMI. HDMI
supports no dual link, but it supports pixel clock rates above 165 MHz.
Only activate Dual Link mode when it is actually possible and requested.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
[imirkin: check for hdmi monitor for computing proto, use sor ctrl to
 enable extra config bit]
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Merge tag 'omapdrm-4.5-resolved' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next

omapdrm changes for v4.5

* enable DRIVER_ATOMIC
* improved TILER performance
* cleanups preparing for DMAbuf import
* fbdev emulation is now optional
* minor fixes

* tag 'omapdrm-4.5-resolved' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  drm/omap: remove obsolete manager assignment
  drm/omap: set DRIVER_ATOMIC for omapdrm
  drm/omap: remove unused plugin defines
  drm/omap: Use bitmaps for TILER placement
  drm: omapdrm: gem: Remove check for impossible condition
  drm: omapdrm: gem: Simplify error handling when creating GEM object
  drm: omapdrm: gem: Don't free mmap offset twice
  drm: omapdrm: gem: Fix GEM object destroy in error path
  drm: omapdrm: gem: Free the correct memory object
  drm: omapdrm: gem: Mask out private flags passed from userspace
  drm: omapdrm: gem: Move global usergart variable to omap_drm_private
  drm: omapdrm: gem: Group functions by purpose
  drm: omapdrm: gem: Remove forward declarations
  drm: omapdrm: gem: Remove unused function prototypes
  drm: omapdrm: Make fbdev emulation optional
  drm: omapdrm: Fix plane state free in plane reset handler
  drm: omapdrm: move omap_plane_reset()
  drm/omap: Use platform_register/unregister_drivers()
  drm: omapdrm: tiler: Remove unneded module alias for tiler

omap_encoder_update() assigns an overlay manager to
dssdev->src->manager. This assignment is not needed, as the connections
in the display chain have already been made at connect step.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

omapdrm supports atomic modesetting, and it seems to work ok. So let's
set the flag to enable the atomic modesetting API support.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Remove unused defines related to SGX plugin which are not used.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Modified Tiler placement to utilize bitmaps for bookkeeping and
all placement algorithms.  This resulted in a substantial savings
in time for all Tiler reservation and free operations.  Typical
savings are in the range of 28% decrease in time taken with larger
buffers showing a 80%+ decrease.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The GEM object can't be tiled without a usergart as that condition is
checked and considered as an error when creating the GEM object.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The goto error statement end up just returning NULL without performing
any cleanup, replace it with a direct return.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>