drm/omap: Use bitmaps for TILER placement

Modified Tiler placement to utilize bitmaps for bookkeeping and
all placement algorithms.  This resulted in a substantial savings
in time for all Tiler reservation and free operations.  Typical
savings are in the range of 28% decrease in time taken with larger
buffers showing a 80%+ decrease.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

drivers/gpu/drm/omapdrm/omap_dmm_tiler.c

@@ -363,6 +363,7 @@ struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w,
 	u32 min_align = 128;
 	int ret;
 	unsigned long flags;
+	size_t slot_bytes;
 
 	BUG_ON(!validfmt(fmt));
 
@@ -371,13 +372,15 @@ struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w,
 	h = DIV_ROUND_UP(h, geom[fmt].slot_h);
 
 	/* convert alignment to slots */
-	min_align = max(min_align, (geom[fmt].slot_w * geom[fmt].cpp));
-	align = ALIGN(align, min_align);
-	align /= geom[fmt].slot_w * geom[fmt].cpp;
+	slot_bytes = geom[fmt].slot_w * geom[fmt].cpp;
+	min_align = max(min_align, slot_bytes);
+	align = (align > min_align) ? ALIGN(align, min_align) : min_align;
+	align /= slot_bytes;
 
 	block->fmt = fmt;
 
-	ret = tcm_reserve_2d(containers[fmt], w, h, align, &block->area);
+	ret = tcm_reserve_2d(containers[fmt], w, h, align, -1, slot_bytes,
+			&block->area);
 	if (ret) {
 		kfree(block);
 		return ERR_PTR(-ENOMEM);
@@ -739,8 +742,7 @@ static int omap_dmm_probe(struct platform_device *dev)
 	   programming during reill operations */
 	for (i = 0; i < omap_dmm->num_lut; i++) {
 		omap_dmm->tcm[i] = sita_init(omap_dmm->container_width,
-						omap_dmm->container_height,
-						NULL);
+						omap_dmm->container_height);
 
 		if (!omap_dmm->tcm[i]) {
 			dev_err(&dev->dev, "failed to allocate container\n");

drivers/gpu/drm/omapdrm/tcm.h

@@ -61,18 +61,17 @@ struct tcm {
 
 	unsigned int y_offset;	/* offset to use for y coordinates */
 
-	/* 'pvt' structure shall contain any tcm details (attr) along with
-	linked list of allocated areas and mutex for mutually exclusive access
-	to the list.  It may also contain copies of width and height to notice
-	any changes to the publicly available width and height fields. */
-	void *pvt;
+	spinlock_t lock;
+	unsigned long *bitmap;
+	size_t map_size;
 
 	/* function table */
-	s32 (*reserve_2d)(struct tcm *tcm, u16 height, u16 width, u8 align,
+	s32 (*reserve_2d)(struct tcm *tcm, u16 height, u16 width, u16 align,
+			  int16_t offset, uint16_t slot_bytes,
 			  struct tcm_area *area);
 	s32 (*reserve_1d)(struct tcm *tcm, u32 slots, struct tcm_area *area);
-	s32 (*free)      (struct tcm *tcm, struct tcm_area *area);
-	void (*deinit)   (struct tcm *tcm);
+	s32 (*free)(struct tcm *tcm, struct tcm_area *area);
+	void (*deinit)(struct tcm *tcm);
 };
 
 /*=============================================================================
@@ -91,7 +90,7 @@ struct tcm {
  *
  */
 
-struct tcm *sita_init(u16 width, u16 height, struct tcm_pt *attr);
+struct tcm *sita_init(u16 width, u16 height);
 
 
 /**
@@ -120,6 +119,9 @@ static inline void tcm_deinit(struct tcm *tcm)
  *			all values may be supported by the container manager,
  *			but it must support 0 (1), 32 and 64.
  *			0 value is equivalent to 1.
+ * @param offset	Offset requirement, in bytes.  This is the offset
+ *			from a 4KiB aligned virtual address.
+ * @param slot_bytes	Width of slot in bytes
  * @param area		Pointer to where the reserved area should be stored.
  *
  * @return 0 on success.  Non-0 error code on failure.  Also,
@@ -129,7 +131,8 @@ static inline void tcm_deinit(struct tcm *tcm)
  *	    allocation.
  */
 static inline s32 tcm_reserve_2d(struct tcm *tcm, u16 width, u16 height,
-				 u16 align, struct tcm_area *area)
+				u16 align, int16_t offset, uint16_t slot_bytes,
+				struct tcm_area *area)
 {
 	/* perform rudimentary error checking */
 	s32 res = tcm  == NULL ? -ENODEV :
@@ -140,7 +143,8 @@ static inline s32 tcm_reserve_2d(struct tcm *tcm, u16 width, u16 height,
 
 	if (!res) {
 		area->is2d = true;
-		res = tcm->reserve_2d(tcm, height, width, align, area);
+		res = tcm->reserve_2d(tcm, height, width, align, offset,
+					slot_bytes, area);
 		area->tcm = res ? NULL : tcm;
 	}