Add support for SnJ devices with Jf and a workaround for some cases
where the devices erroneously show as QnJ devices.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210205110447.ae6ed654e557.Ic11ed4df410328359b6a2c997456692901d99468@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We were hardcoding the SnJ and So IDs already at the trans_cfg
selection, instead of doing it in a more generic way.  Use the generic
trans_cfg selection for these devices and move the hardcoded IDs to
the new table.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210205110447.7e11dcb7b04e.I6f65126175d54b73834c2896013d00ce114ff601@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add a PCI ID for snj with mr in AX family.
Signed-off-by: NMatti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.101ac3058c04.Idd28706b122cdc8103956f8e72bb062fe4adb54e@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Use SPDX tags instead of the long copyright notices.  Also cleanup
some duplicate copyright notices and combine the years where possible.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We no longer need code that was introduced to differentiate
between two early versions of 8260.

We can remove this convoluted way to get the hardware version
that was needed because of a bug in the register's
configuration.

Moreover, since we no longer need to access the PRPH
registers, we no longer need to wake up the device,
request ownership, etc...
Remove all that.

This allows us to get the rid of the obsolete comment
about the AUX bus MISC address space which should have
been moved when this code was moved away from here.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.4a5665ccd8a6.Iff3879405c15758ba661c430e77dc2160ddada1c@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Some subsytem device IDs were missing from the list, so some AX210
devices were not recognized.  Add them.
Signed-off-by: NGolan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.a06ba7540449.I7390305d088a49c1043c9b489154fe057989c18f@changeid
Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com

The 0x0024 subsytem device ID was missing from the list, so some AX210
devices were not recognized.  Add it.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid

We were using a very high latency for all 9560 devices so they all
would have time to stabilize.  But this causes the system to be
slighly slower, so we can use the best values for each device.

This requires a new trans cfg struct for devices with longer latency
and some adjustments to the other structs.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008181047.34392f98fdb1.I3d3db14f6d1a8ecc547ca6afce8488816bd26081@changeid

The 0x271B and 0x271C devices are part of the 9000 series (discrete),
and not 9560 (integrated).  Fix it accordingly.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.5cc1809940d2.If0d1e0b91fa99486403d276cf7c0fe7680a7ca2a@changeid

Add PCI subsystem ID 0x6074 for Qu family.
Signed-off-by: NGolan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201008180656.fba1c29fc217.I7d47c8de078d48cfc1c98ce1086e71d8d2ebb980@changeid

added ID for ma in AX family.
Signed-off-by: NRoee Goldfiner <roee.h.goldfiner@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.8cf7040fe88c.I39ef960a4d448b7d303c2bbfcccded09a54479b0@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

add few PCI ID'S for ma with gf and mr in AX family.
Signed-off-by: NIhab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.6add94c21abe.I1aa1c5e3c2c12ce82ed30429e0ad92225ece7ce3@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

txcmd fields is not directly related to the PCIe transport,
so move to the common iwl_trans_alloc function.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.862ef88d1ab2.Iba220a962b5d6d05c030b9275d97a89202d055dc@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

add few PCI ID'S for AX201 family including killer cards.
Signed-off-by: NIhab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.21397978115f.Id2d95275a36a6bb6b226d12cb6c5a629334587db@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Fix the regression introduced by commit c8685937 ("iwlwifi: move
pu devices to new table") by adding the ids and the configurations of
two missing Killer 1550 cards in order to configure and let them work
correctly again (following the new table convention).
Resolve bug 208141 ("Wireless ac 9560 not working kernel 5.7.2",
https://bugzilla.kernel.org/show_bug.cgi?id=208141).

Fixes: c8685937 ("iwlwifi: move pu devices to new table")
Signed-off-by: NAlessio Bonfiglio <alessio.bonfiglio@mail.polimi.it>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200714091911.4442-1-alessio.bonfiglio@mail.polimi.it

The killer devices were left out of the checks that convert Qu-B0 to
QuZ configurations.  Add them.

Cc: stable@vger.kernel.org # v5.3+
Fixes: 5a8c31aa ("iwlwifi: pcie: fix recognition of QuZ devices")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Tested-by: NYou-Sheng Yang <vicamo@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20200424121518.b715acfbe211.I273a098064a22577e4fca767910fd9cf0013f5cb@changeid

Convert all Qu/Hr1 devices to the new device tables, by modifying the
corresponding structures, adding a new name and generalizing the
device recognition.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.ec0e04102d2c.Ia36f2c7bbf06cb6436424d40d6adb2376f2962ee@changeid

Convert all the occurrences of QnJ with Hr into a single entry in the
PCI device table.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.21283ca79d82.I57a493c679a56fff11417afdaec76617711ff6a9@changeid

All devices that use iwl_ax101_cfg_qu_hr are recognized via the device
info table, so the cfg will never be iwl_ax101_cfg_qu_hr.  Remove the
code that converts this into QuZ and Qu-C, since it's not needed
anymore.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.30b6b4aae1c1.If5e583835c9f7f2771a50ba1b2f33bb85f25b383@changeid

This comment was only related to the PCI RTPM implementation, which
has been removed a while ago, and is not meaningless.  Remove it.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.f362e4560a3b.I8d858c6c9a6c98b45d2195dfe28dabe0286c8a83@changeid

Some So devices have a longer wake latency.  To support this properly,
add new cfg structs for them so the driver will inform the FW about
the need to use another xtal and use a higher wait value during state
transitions.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.daf515618f57.I80e60006b108e1586e3c56669635c670597fe08d@changeid

Some Qu devices require an intermediate amount of time to wake up and
for LTR notifications, so add a new structure with the correct values
for them and change the corresponding devices to use it.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.d6df2bcee78f.Ie008b0c8f03340a466c1ef981bfd25359c9de90d@changeid

A new device ID needs to be added to the list to support new SoCs.
Add it and support all subsystem IDs that other Qu devices support.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.5e5ce668ff8b.I20a9c8b3470aaabaa54361a5641637e5a14d8321@changeid

add few PCI ID'S for AX family.
Signed-off-by: NIhab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.5eae2261b70c.I0369619a562c4e4008e2f0a3afb9ed5d4c9b49d4@changeid

We don't support the FPGA versions of this card combination anymore.
Remove the cfg mangling that tries to load it and all the relevant
structures.

Change-Id: I190652101afcab682cfba873d062992f11efca32
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and
0x43F0, need a longer wait for the xtal to stabilize.  To handle this,
add a new trans_cfg structure for Qu devices with a larger
xtal_latency value and apply them to the devices recognized by these
IDs.  Also add a flag that allows us to inform the FW that the low
latency xtal should be used.

Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Now that we identify the correct cfgs with the new tables for Qu step
C and QuZ with Jf, we can remove the mangling we do later on.

Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

All the QnJ devices have a similar matching to the other Qu devices,
but needs a different configuration.  Convert the QnJ devices to the
new table accordingly.

Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add new generic iwl_trans structures for these devices and apply the
correct cfg depending on the device characteristics.

Since we have to match Qu with IWL_CONFIG_ANY, we also need to move
the Hr devices to the new table, but for now we keep matching on PCI
device and subsystem device IDs.

Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We need to use different firmware versions for different HW steps with
certain devices.  Prepare for this differentiation by adding HW step
to the new device table.

Change-Id: Ib1afb7b0c89e9dc2d26e6d32ea19e978c17ba1dd
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

These values are selected based on the PCI device ID, so the decision
to use them can be made early.  By moving them to the trans_cfg, we
avoid duplicating the large cfg structs for small pieces of
data (sometimes a single boolean).  This will also allow us to make
more decisions based on, for instance, the SoC type in used.

The trans_cfg concept changes a bit, because previously it was used
only to boot the device before reading further characteristics and now
it also contains more data that is associated with the device ID.

Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The iwl9560_2ac_cfg struct is used for PNJ devices and the
configuration is the same as iwl9260_2ac_cfg, so we can remove the
former to avoid redundancy.

Change-Id: I17ac1802f00bd80006930b922a9fc21df60e3c16
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Three devices, with PCI device ID 0x2526 and subdevice IDs 0x4010,
0x4018 and 0x401C were removed accidentally.  Add them back.
Reported-by: NBrett Hassal <brett.hassal@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206661
Fixes: 0b295a1e ("iwlwifi: add device name to device_info")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20200317123331.16762b29f26c.I928bcaa799e7b3d33838c0667714eeb9fa665290@changeid

Move the AX200 devices to the new table and add the appropriate cfg
struct and strings.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fdfa5f31b8b1.Idfd28829d9f3820de06d3bba8fa66048b8d0d0b0@changeid

These devices can now also be fully differentiated by using the new
parameters.  Move them all to the new table format.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.11c65d195677.I8faf50b325282df4892520a3b21fbdedabbb64f0@changeid

All the pu devices can now be differentiated using the new
parameters, so move them all to the new tables accordingly.

This also includes removal of a few deprecated IDs and redundant cfg
structs.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.e7dc61e665f3.I44dcf9195bb8cc9e8c8e3e87182e9185c819a99d@changeid

These devices don't exist anymore, so remove them from the tables.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fef62aa45887.I302e32b7cfff7da0d920547fae60ad9f2296e052@changeid

The 9260-1x1 device can be differentiated using the PCI device ID.
There is a single occurrence of this device, so continue relying on
the device and subsystem device IDs.

The name of this device was incorrect, so add a new string
specifically for it.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.4d74e1be7cac.Id27bd9c878b73cb771691cbe6082fd40e079b44d@changeid

TH1 devices can now be fully differentiated by using the device
parameters we have (particularly the RF_TYPE).  Start using these
parameters instead of hardcoding to specific subsystem device IDs.

This also fixes the name of one of the TH1 devices that was
erroneously using the 9260 struct and renames 9160 to 9162.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.18d4304b5454.Ib168d186da88393e9ec46f0fca523edb48d9138e@changeid

These devices can be differentiated depending on the RF type and RF
ID.  Change them to use these instead of relying on the subsystem
device IDs.

This also fixes some names that were not including 160MHz (as they
should).
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.345de1efb3ec.Ib9221027a955188ea7c1ffca8a45bccd6c1e6a13@changeid