- 19 8月, 2017 6 次提交
-
-
由 Nicholas Piggin 提交于
Commit 05a4a952 ("kernel/watchdog: split up config options") lost the perf-based hardlockup detector's dependency on PERF_EVENTS, which can result in broken builds with some powerpc configurations. Restore the dependency. Add it in for x86 too, despite x86 always selecting PERF_EVENTS it seems reasonable to make the dependency explicit. Link: http://lkml.kernel.org/r/20170810114452.6673-1-npiggin@gmail.com Fixes: 05a4a952 ("kernel/watchdog: split up config options") Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Acked-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Jaegeuk and Brad report a NULL pointer crash when writeback ending tries to update the memcg stats: BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0 IP: test_clear_page_writeback+0x12e/0x2c0 [...] RIP: 0010:test_clear_page_writeback+0x12e/0x2c0 Call Trace: <IRQ> end_page_writeback+0x47/0x70 f2fs_write_end_io+0x76/0x180 [f2fs] bio_endio+0x9f/0x120 blk_update_request+0xa8/0x2f0 scsi_end_request+0x39/0x1d0 scsi_io_completion+0x211/0x690 scsi_finish_command+0xd9/0x120 scsi_softirq_done+0x127/0x150 __blk_mq_complete_request_remote+0x13/0x20 flush_smp_call_function_queue+0x56/0x110 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x27/0x40 call_function_single_interrupt+0x89/0x90 RIP: 0010:native_safe_halt+0x6/0x10 (gdb) l *(test_clear_page_writeback+0x12e) 0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619). 614 mod_node_page_state(page_pgdat(page), idx, val); 615 if (mem_cgroup_disabled() || !page->mem_cgroup) 616 return; 617 mod_memcg_state(page->mem_cgroup, idx, val); 618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)]; 619 this_cpu_add(pn->lruvec_stat->count[idx], val); 620 } 621 622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order, 623 gfp_t gfp_mask, The issue is that writeback doesn't hold a page reference and the page might get freed after PG_writeback is cleared (and the mapping is unlocked) in test_clear_page_writeback(). The stat functions looking up the page's node or zone are safe, as those attributes are static across allocation and free cycles. But page->mem_cgroup is not, and it will get cleared if we race with truncation or migration. It appears this race window has been around for a while, but less likely to trigger when the memcg stats were updated first thing after PG_writeback is cleared. Recent changes reshuffled this code to update the global node stats before the memcg ones, though, stretching the race window out to an extent where people can reproduce the problem. Update test_clear_page_writeback() to look up and pin page->mem_cgroup before clearing PG_writeback, then not use that pointer afterward. It is a partial revert of 62cccb8c ("mm: simplify lock_page_memcg()") but leaves the pageref-holding callsites that aren't affected alone. Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org Fixes: 62cccb8c ("mm: simplify lock_page_memcg()") Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: NJaegeuk Kim <jaegeuk@kernel.org> Tested-by: NJaegeuk Kim <jaegeuk@kernel.org> Reported-by: NBradley Bolen <bradleybolen@gmail.com> Tested-by: NBrad Bolen <bradleybolen@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "A bug in the VSX register saving that could cause userspace FP/VMX register corruption. Never seen to happen (that we know of), was found by code inspection, but still tagged for stable given the consequences" * tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "A small number of bugfixes, nothing serious this time. Here is a full list. 4.13 regression fix: - imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete patch DT fixes for recently added devices: - badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset - sama5d2 memory controller had the wrong ID and registers - imx7 power domains did not work correctly with deferred probing (driver added in 4.12) - Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO interrupts Fixes for older bugs that just got noticed: - i.MX25 ADC support (added in 4.6) apparently never worked right due to a missing 'ranges' property in DT. - Renesas Salvador Audio support (added in v4.5) was broken for device repeated bind/unbind due to a naming conflict. - Various allwinner boards are missing an 'ethernet' alias in DT, leading to unstable device naming. Preventive bugfix: - TI Keystone needs a fix to prevent a NULL pointer dereference with an upcoming PM change" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: ti: ti_sci_pm_domains: Populate name for genpd ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias arm64: renesas: salvator-common: avoid audio_clkout naming conflict ARM: dts: i.MX25: add ranges to tscadc soc: imx: gpcv2: fix regulator deferred probe ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A collection of small fixes, mostly for regression fixes (sequencer kconfig and emu10k1 probe) and device-specific quirks (three for USB and one for HD-audio). One significant change is a fix for races in ALSA sequencer core, which covers over the previous incomplete fix" * tag 'sound-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: emu10k1: Fix forgotten user-copy conversion in init code ALSA: usb-audio: add DSD support for new Amanero PID ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset ALSA: seq: 2nd attempt at fixing race creating a queue ALSA: hda/realtek - Fix pincfg for Dell XPS 13 9370 ALSA: seq: Fix CONFIG_SND_SEQ_MIDI dependency
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping fix from Christoph Hellwig: "Another dma-mapping regression fix" * tag 'dma-mapping-4.13-3' of git://git.infradead.org/users/hch/dma-mapping: of: fix DMA mask generation
-
- 18 8月, 2017 15 次提交
-
-
由 Dave Gerlach 提交于
Commit b6a1d093 ("PM / Domains: Extend generic power domain debugfs") now creates a debugfs directory for each genpd based on the name of the genpd. Currently no name is given to the genpd created by ti_sci_pm_domains driver so because of this we see a NULL pointer dereferences when it is accessed on boot when the debugfs entry creation is attempted. Give the genpd a name before registering it to avoid this. Fixes: 52835d59 ("soc: ti: Add ti_sci_pm_domains driver") Signed-off-by: NDave Gerlach <d-gerlach@ti.com> Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'imx-fixes-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.13, round 3" from Shawn Guo: - Fix PCIe reset GPIO of imx6qdl-nitrogen6_som2 board, which was a bad copy from nitrogen6_max device tree. * tag 'imx-fixes-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
-
由 Arnd Bergmann 提交于
Merge tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Pull "Allwinner fixes for 4.13, round 2" from Chen-Yu Tsai: Three fixes adding a missing alias for the Ethernet controller on A64 boards. One adding a missing interrupt for the pin controller. * tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
-
由 Takashi Iwai 提交于
The commit d42fe63d ("ALSA: emu10k1: Get rid of set_fs() usage") converted the user-space copy hack with set_fs() to the direct memcpy(), but one place was forgotten. This resulted in the error from snd_emu10k1_init_efx(), eventually failed to load the driver. Fix the missing piece. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196687 Fixes: d42fe63d ("ALSA: emu10k1: Get rid of set_fs() usage") Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jussi Laako 提交于
Add DSD support for new Amanero Combo384 firmware version with a new PID. This firmware uses DSD_U32_BE. Fixes: 3eff682d ("ALSA: usb-audio: Support both DSD LE/BE Amanero firmware versions") Signed-off-by: NJussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Gary Bisson 提交于
Previous value was a bad copy of nitrogen6_max device tree. Signed-off-by: NGary Bisson <gary.bisson@boundarydevices.com> Fixes: 3faa1bb2 ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Cc: <stable@vger.kernel.org> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Seems to be slowing down nicely, just one amdgpu fix, and a bunch of i915 fixes" * tag 'drm-fixes-for-v4.13-rc6' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: save list length when fence is signaled drm/i915: Avoid the gpu reset vs. modeset deadlock drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt drm/i915: Return correct EDP voltage swing table for 0.85V drm/i915/cnl: Add slice and subslice information to debugfs. drm/i915: Perform an invalidate prior to executing golden renderstate drm/i915: remove unused function declaration
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix two issues related to exposing the current CPU frequency to user space on x86. Specifics: - Disable interrupts around reading IA32_APERF and IA32_MPERF in aperfmperf_snapshot_khz() (introduced recently) to avoid excessive delays between the reads that may result from interrupt handling (Doug Smythies). - Fix the computation of the CPU frequency to be reported through the pstate_sample tracepoint in intel_pstate (Doug Smythies)" * tag 'pm-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: x86: Disable interrupts during MSRs reading cpufreq: intel_pstate: report correct CPU frequencies during trace
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB Input: elan_i2c - add ELAN0608 to the ACPI table Input: trackpoint - assume 3 buttons when buttons detection fails
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
single amdgpu fix. * 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: save list length when fence is signaled
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2017-08-16' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for v4.13-rc6 "Chris' "drm/i915: Perform an invalidate prior to executing golden renderstate" and Daniel's "drm/i915: Avoid the gpu reset vs. modeset deadlock" seem like the most important ones. * tag 'drm-intel-fixes-2017-08-16' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Avoid the gpu reset vs. modeset deadlock drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt drm/i915: Return correct EDP voltage swing table for 0.85V drm/i915/cnl: Add slice and subslice information to debugfs. drm/i915: Perform an invalidate prior to executing golden renderstate drm/i915: remove unused function declaration
-
由 Rafael J. Wysocki 提交于
* intel_pstate-fix: cpufreq: intel_pstate: report correct CPU frequencies during trace * cpufreq-x86-fix: cpufreq: x86: Disable interrupts during MSRs reading
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: - Fix PCI memory bar assignments with 64-bit kernels on machines with Dino/Cujo PCI chipsets. This makes PCI graphic cards work on such machines (from Thomas Bogendoerfer). - Fix documentation to be more clear about the difference between %pF and %pS printk format usage. There are still many places in the kernel which have it wrong (from Petr Mladek, Sergey Senozhatsky & me). * 'parisc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: printk-formats.txt: Better describe the difference between %pS and %pF parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull quota fix from Jan Kara: "A fix of a check for quota limit" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: correct space limit check
-
由 Linus Torvalds 提交于
Christian Brauner reported that if you use the TIOCGPTPEER ioctl() to get a slave pty file descriptor, the resulting file descriptor doesn't look right in /proc/<pid>/fd/<fd>. In particular, he wanted to use readlink() on /proc/self/fd/<fd> to get the pathname of the slave pty (basically implementing "ptsname{_r}()"). The reason for that was that we had generated the wrong 'struct path' when we create the pty in ptmx_open(). In particular, the dentry was correct, but the vfsmount pointed to the mount of the ptmx node. That _can_ be correct - in case you use "/dev/pts/ptmx" to open the master - but usually is not. The normal case is to use /dev/ptmx, which then looks up the pts/ directory, and then the vfsmount of the ptmx node is obviously the /dev directory, not the /dev/pts/ directory. We actually did have the right vfsmount available, but in the wrong place (it gets looked up in 'devpts_acquire()' when we get a reference to the pts filesystem), and so ptmx_open() used the wrong mnt pointer. The end result of this confusion was that the pty worked fine, but when if you did TIOCGPTPEER to get the slave side of the pty, end end result would also work, but have that dodgy 'struct path'. And then when doing "d_path()" on to get the pathname, the vfsmount would not match the root of the pts directory, and d_path() would return an empty pathname thinking that the entry had escaped a bind mount into another mount. This fixes the problem by making devpts_acquire() return the vfsmount for the pts filesystem, allowing ptmx_open() to trivially just use the right mount for the pts dentry, and create the proper 'struct path'. Reported-by: NChristian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: NEric Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 8月, 2017 6 次提交
-
-
由 Takashi Iwai 提交于
C-Media devices (at least some models) mute the playback stream when volumes are set to the minimum value. But this isn't informed via TLV and the user-space, typically PulseAudio, gets confused as if it's still played in a low volume. This patch adds the new flag, min_mute, to struct usb_mixer_elem_info for indicating that the mixer element is with the minimum-mute volume. This flag is set for known C-Media devices in snd_usb_mixer_fu_apply_quirk() in turn. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196669 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Fourth Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman: * Avoid audio_clkout naming conflict for salvator boards using Renesas R-Car Gen 3 SoCs Morimoto-san says "The clock name of "audio_clkout" is used by the Renesas sound driver. This duplicated naming breaks its clock registering/unregistering. Especially when unbind/bind it can't handle clkout correctly. This patch renames "audio_clkout" to "audio-clkout" to avoid the naming conflict." * tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: renesas: salvator-common: avoid audio_clkout naming conflict
-
由 Robin Murphy 提交于
Historically, DMA masks have suffered some ambiguity between whether they represent the range of physical memory a device can access, or the address bits a device is capable of driving, particularly since on many platforms the two are equivalent. Whilst there are some stragglers left (dma_max_pfn(), I'm looking at you...), the majority of DMA code has been cleaned up to follow the latter definition, not least since it is the only one which makes sense once IOMMUs are involved. In this respect, of_dma_configure() has always done the wrong thing in how it generates initial masks based on "dma-ranges". Although rounding down did not affect the TI Keystone platform where dma_addr + size is already a power of two, in any other case it results in a mask which is at best unnecessarily constrained and at worst unusable. BCM2837 illustrates the problem nicely, where we have a DMA base of 3GB and a size of 1GB - 16MB, giving dma_addr + size = 0xff000000 and a resultant mask of 0x7fffffff, which is then insufficient to even cover the necessary offset, effectively making all DMA addresses out-of-range. This has been hidden until now (mostly because we don't yet prevent drivers from simply overwriting this initial mask later upon probe), but due to recent changes elsewhere now shows up as USB being broken on Raspberry Pi 3. Make it right by rounding up instead of down, such that the mask correctly correctly describes all possisble bits the device needs to emit. Fixes: 9a6d7298 ("of: Calculate device DMA masks based on DT dma-range size") Reported-by: NStefan Wahren <stefan.wahren@i2se.com> Reported-by: NAndreas Färber <afaerber@suse.de> Reported-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NRobin Murphy <robin.murphy@arm.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "A couple of minor fixes (st, ses) and some bigger driver fixes for qla2xxx (crash triggered by fw dump) and ipr (lockdep problems with mq)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ses: Fix wrong page error scsi: ipr: Fix scsi-mq lockdep issue scsi: st: fix blk_get_queue usage scsi: qla2xxx: Fix system crash while triggering FW dump
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit由 Linus Torvalds 提交于
Pull audit fixes from Paul Moore: "Two small fixes to the audit code, both explained well in the respective patch descriptions, but the quick summary is one use-after-free fix, and one silly fanotify notification flag fix" * tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: Receive unmount event audit: Fix use after free in audit_remove_watch_rule()
-
由 Helge Deller 提交于
Sometimes people seems unclear when to use the %pS or %pF printk format. For example, see commit 51d96dc2 ("random: fix warning message on ia64 and parisc") which fixed such a wrong format string. The documentation should be more clear about the difference. Signed-off-by: NHelge Deller <deller@gmx.de> [pmladek@suse.com: Restructure the entire section] Signed-off-by: NPetr Mladek <pmladek@suse.com> Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-
- 16 8月, 2017 13 次提交
-
-
由 Benjamin Herrenschmidt 提交于
VSX uses a combination of the old vector registers, the old FP registers and new "second halves" of the FP registers. Thus when we need to see the VSX state in the thread struct (flush_vsx_to_thread()) or when we'll use the VSX in the kernel (enable_kernel_vsx()) we need to ensure they are all flushed into the thread struct if either of them is individually enabled. Unfortunately we only tested if the whole VSX was enabled, not if they were individually enabled. Fixes: 72cd7b44 ("powerpc: Uncomment and make enable_kernel_vsx() routine available") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Thomas Bogendoerfer 提交于
For 64bit kernels the lmmio_space_offset of the host bridge window isn't set correctly on systems with dino/cujo PCI host bridges. This leads to not assigned memory bars and failing drivers, which need to use these bars. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: <stable@vger.kernel.org> Acked-by: NHelge Deller <deller@gmx.de> Signed-off-by: NHelge Deller <deller@gmx.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel Grumbach. 2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From Vivien Didelot. 3) Fix two regressions with bonding on wireless, from Andreas Born. 4) Fix build when busypoll is disabled, from Daniel Borkmann. 5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet. 6) Set SKB cached route properly in inet_rtm_getroute(), from Florian Westphal. 7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding Tianhong. 8) Fix module refcnt leak in ULP code, from Sabrina Dubroca. 9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric Dumazet. 10) Need to purge socket write queue in dccp_destroy_sock(), also from Eric Dumazet. 11) Make bpf_trace_printk() work properly on 32-bit architectures, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) bpf: fix bpf_trace_printk on 32 bit archs PCI: fix oops when try to find Root Port for a PCI device sfc: don't try and read ef10 data on non-ef10 NIC net_sched: remove warning from qdisc_hash_add net_sched/sfq: update hierarchical backlog when drop packet net_sched: reset pointers to tcf blocks in classful qdiscs' destructors ipv4: fix NULL dereference in free_fib_info_rcu() net: Fix a typo in comment about sock flags. ipv6: fix NULL dereference in ip6_route_dev_notify() tcp: fix possible deadlock in TCP stack vs BPF filter dccp: purge write queue in dccp_destroy_sock() udp: fix linear skb reception with PEEK_OFF ipv6: release rt6->rt6i_idev properly during ifdown af_key: do not use GFP_KERNEL in atomic contexts tcp: ulp: avoid module refcnt leak in tcp_set_ulp net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag PCI: Disable Relaxed Ordering Attributes for AMD A1100 PCI: Disable Relaxed Ordering for some Intel processors PCI: Disable PCIe Relaxed Ordering if unsupported ...
-
由 Daniel Borkmann 提交于
James reported that on MIPS32 bpf_trace_printk() is currently broken while MIPS64 works fine: bpf_trace_printk() uses conditional operators to attempt to pass different types to __trace_printk() depending on the format operators. This doesn't work as intended on 32-bit architectures where u32 and long are passed differently to u64, since the result of C conditional operators follows the "usual arithmetic conversions" rules, such that the values passed to __trace_printk() will always be u64 [causing issues later in the va_list handling for vscnprintf()]. For example the samples/bpf/tracex5 test printed lines like below on MIPS32, where the fd and buf have come from the u64 fd argument, and the size from the buf argument: [...] 1180.941542: 0x00000001: write(fd=1, buf= (null), size=6258688) Instead of this: [...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512) One way to get it working is to expand various combinations of argument types into 8 different combinations for 32 bit and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64 as well that it resolves the issue. Fixes: 9c959c86 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: NJames Hogan <james.hogan@imgtec.com> Tested-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Eric report a oops when booting the system after applying the commit a99b646a ("PCI: Disable PCIe Relaxed..."): [ 4.241029] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 4.247001] IP: pci_find_pcie_root_port+0x62/0x80 [ 4.253011] PGD 0 [ 4.253011] P4D 0 [ 4.253011] [ 4.258013] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 4.262015] Modules linked in: [ 4.265005] CPU: 31 PID: 1 Comm: swapper/0 Not tainted 4.13.0-dbx-DEV #316 [ 4.271002] Hardware name: Intel RML,PCH/Iota_QC_19, BIOS 2.40.0 06/22/2016 [ 4.279002] task: ffffa2ee38cfa040 task.stack: ffffa51ec0004000 [ 4.285001] RIP: 0010:pci_find_pcie_root_port+0x62/0x80 [ 4.290012] RSP: 0000:ffffa51ec0007ab8 EFLAGS: 00010246 [ 4.295003] RAX: 0000000000000000 RBX: ffffa2ee36bae000 RCX: 0000000000000006 [ 4.303002] RDX: 000000000000081c RSI: ffffa2ee38cfa8c8 RDI: ffffa2ee36bae000 [ 4.310013] RBP: ffffa51ec0007b58 R08: 0000000000000001 R09: 0000000000000000 [ 4.317001] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa51ec0007ad0 [ 4.324005] R13: ffffa2ee36bae098 R14: 0000000000000002 R15: ffffa2ee37204818 [ 4.331002] FS: 0000000000000000(0000) GS:ffffa2ee3fcc0000(0000) knlGS:0000000000000000 [ 4.339002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4.345001] CR2: 0000000000000050 CR3: 000000401000f000 CR4: 00000000001406e0 [ 4.351002] Call Trace: [ 4.354012] ? pci_configure_device+0x19f/0x570 [ 4.359002] ? pci_conf1_read+0xb8/0xf0 [ 4.363002] ? raw_pci_read+0x23/0x40 [ 4.366011] ? pci_read+0x2c/0x30 [ 4.370014] ? pci_read_config_word+0x67/0x70 [ 4.374012] pci_device_add+0x28/0x230 [ 4.378012] ? pci_vpd_f0_read+0x50/0x80 [ 4.382014] pci_scan_single_device+0x96/0xc0 [ 4.386012] pci_scan_slot+0x79/0xf0 [ 4.389001] pci_scan_child_bus+0x31/0x180 [ 4.394014] acpi_pci_root_create+0x1c6/0x240 [ 4.398013] pci_acpi_scan_root+0x15f/0x1b0 [ 4.402012] acpi_pci_root_add+0x2e6/0x400 [ 4.406012] ? acpi_evaluate_integer+0x37/0x60 [ 4.411002] acpi_bus_attach+0xdf/0x200 [ 4.415002] acpi_bus_attach+0x6a/0x200 [ 4.418014] acpi_bus_attach+0x6a/0x200 [ 4.422013] acpi_bus_scan+0x38/0x70 [ 4.426011] acpi_scan_init+0x10c/0x271 [ 4.429001] acpi_init+0x2fa/0x348 [ 4.433004] ? acpi_sleep_proc_init+0x2d/0x2d [ 4.437001] do_one_initcall+0x43/0x169 [ 4.441001] kernel_init_freeable+0x1d0/0x258 [ 4.445003] ? rest_init+0xe0/0xe0 [ 4.449001] kernel_init+0xe/0x150 ====================== cut here ============================= It looks like the pci_find_pcie_root_port() was trying to find the Root Port for the PCI device which is the Root Port already, it will return NULL and trigger the problem, so check the highest_pcie_bridge to fix thie problem. Fixes: a99b646a ("PCI: Disable PCIe Relaxed Ordering if unsupported") Fixes: c56d4450 ("PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum") Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bert Kenward 提交于
The MAC stats command takes a port ID, which doesn't exist on pre-ef10 NICs (5000- and 6000- series). This is extracted from the NIC specific data; we misinterpret this as the ef10 data structure, causing us to read potentially unallocated data. With a KASAN kernel this can cause errors with: BUG: KASAN: slab-out-of-bounds in efx_mcdi_mac_stats Fixes: 0a2ab4d9 ("sfc: set the port-id when calling MC_CMD_MAC_STATS") Reported-by: NStefano Brivio <sbrivio@redhat.com> Tested-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NBert Kenward <bkenward@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Konstantin Khlebnikov 提交于
It was added in commit e57a784d ("pkt_sched: set root qdisc before change() in attach_default_qdiscs()") to hide duplicates from "tc qdisc show" for incative deivices. After 59cc1f61 ("net: sched: convert qdisc linked list to hashtable") it triggered when classful qdisc is added to inactive device because default qdiscs are added before switching root qdisc. Anyway after commit ea327469 ("net: sched: avoid duplicates in qdisc dump") duplicates are filtered right in dumper. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Konstantin Khlebnikov 提交于
When sfq_enqueue() drops head packet or packet from another queue it have to update backlog at upper qdiscs too. Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Konstantin Khlebnikov 提交于
Traffic filters could keep direct pointers to classes in classful qdisc, thus qdisc destruction first removes all filters before freeing classes. Class destruction methods also tries to free attached filters but now this isn't safe because tcf_block_put() unlike to tcf_destroy_chain() cannot be called second time. This patch set class->block to NULL after first tcf_block_put() and turn second call into no-op. Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If fi->fib_metrics could not be allocated in fib_create_info() we attempt to dereference a NULL pointer in free_fib_info_rcu() : m = fi->fib_metrics; if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt)) kfree(m); Before my recent patch, we used to call kfree(NULL) and nothing wrong happened. Instead of using RCU to defer freeing while we are under memory stress, it seems better to take immediate action. This was reported by syzkaller team. Fixes: 3fb07daf ("ipv4: add reference counting to metrics") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tonghao Zhang 提交于
Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Based on a syzkaller report [1], I found that a per cpu allocation failure in snmp6_alloc_dev() would then lead to NULL dereference in ip6_route_dev_notify(). It seems this is a very old bug, thus no Fixes tag in this submission. Let's add in6_dev_put_clear() helper, as we will probably use it elsewhere (once available/present in net-next) [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff88019f456680 task.stack: ffff8801c6e58000 RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202 RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000 RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001 RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37 R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8 FS: 00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 in6_dev_put include/net/addrconf.h:335 [inline] ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678 call_netdevice_notifiers net/core/dev.c:1694 [inline] rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587 register_netdev+0x1a/0x30 net/core/dev.c:7669 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214 ops_init+0x10a/0x570 net/core/net_namespace.c:118 setup_net+0x313/0x710 net/core/net_namespace.c:294 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206 SYSC_unshare kernel/fork.c:2347 [inline] SyS_unshare+0x653/0xfa0 kernel/fork.c:2297 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512c9 RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3 f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6 0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP: ffff8801c6e5f1b0 RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP: ffff8801c6e5f1b0 RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: ffff8801c6e5f1b0 ---[ end trace e441d046c6410d31 ]--- Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Kara 提交于
Although audit_watch_handle_event() can handle FS_UNMOUNT event, it is not part of AUDIT_FS_WATCH mask and thus such event never gets to audit_watch_handle_event(). Thus fsnotify marks are deleted by fsnotify subsystem on unmount without audit being notified about that which leads to a strange state of existing audit rules with dead fsnotify marks. Add FS_UNMOUNT to the mask of events to be received so that audit can clean up its state accordingly. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NPaul Moore <paul@paul-moore.com>
-