Stateless decoders have different expectations about the
start code that is prepended on H264 slices. Add a
menu control to express the supported start code types
(including no start code).

Drivers are allowed to support only one start code type,
but they can support both too.

Note that this is independent of the H264 decoding mode,
which specifies the granularity of the decoding operations.
Either in frame-based or slice-based mode, this new control
will allow to define the start code expected on H264 slices.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Some stateless decoders don't support per-slice decoding granularity
(or at least not in a way that would make them efficient or easy to use).

Expose a menu to control the supported decoding modes. Drivers are
allowed to support only one decoding but they can support both too.

To fully specify the decoding operation, we need to introduce
a start_byte_offset, to indicate where slices start.
Signed-off-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The V4L2_PIX_FMT_H264_SLICE_RAW name was originally suggested
because the pixel format would represent H264 slices without any
start code.

However, as we will now introduce a start code menu control,
give the pixel format a more meaningful name, while it's
still early enough to do so.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Tested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Four new variants of RGB32 were added. Add support for them to
the v4l2_format_info() function.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Since it's not necessarily very explicit why we need to zero some fields
in std_validate_compound, add a comment before the function to explain
why, which should help as a reminder.
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

If a driver sets a FMT flag in the enum_fmt op, then that will be
ignored since v4l_fill_fmtdesc() overwrites it again.

v4l_fill_fmtdesc() should OR its flag, not overwrite it.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Use the videodev-$(CONFIG_FOO) syntax to simplify the Makefile.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Device nodes of type VFL_TYPE_SUBDEV have a 0 device_caps, so they
trigger this warning. Add a check against VFL_TYPE_SUBDEV.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 3c135050 ("media: v4l2-dev/ioctl: require non-zero device_caps, verify sane querycap results")
Reported-by: NJan Kotas <jank@cadence.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Make the V4L2 async framework a bit more robust by allowing to clean up an
uninitialised notifier. Otherwise the result would be a (close to) NULL
pointer dereference.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

v4l2_async_notifier_add_fwnode_remote_subdev is a convenience function for
parsing information on V4L2 fwnode subdevs.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The v4l2_async_notifier_add_fwnode_subdev() did not take a reference of
the added fwnode, relying on the caller to handle that instead, in essence
putting the fwnode to be added if there was an error.

As the reference is eventually released during the notifier cleanup, this
is not intuitive nor logical. Improve this by always getting a reference
when the function succeeds, and the caller releasing the reference when it
does not *itself* need it anymore.

Luckily, perhaps, there were just a handful of callers using the function.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Use fwnode_property_count_uXX() directly, that makes code neater.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Now that all V4L2 drivers set device_caps in struct video_device, we can add
a check for this to ensure all future drivers fill this in.

Also verify that when the querycap ioctl is called the driver didn't mess
with the device_caps value and that capabilities is a superset of device_caps.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: NSakari Ailus <sakari.ailus@linux.intel.com>
[hverkuil-cisco@xs4all.nl: fix too-long line]
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Currently, the v4l2 control code is a bit silent on errors.
Add debug messages on (hopefully) most of the error paths.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

When reaching the end of stream, V4L2 m2m clients may expect the
V4L2_EOS_EVENT. Although the V4L2_EOS_EVENT is deprecated behavior,
drivers must signal that event before dequeuing the buffer that has the
V4L2_BUF_FLAG_LAST flag set.

If a driver queues the V4L2_EOS_EVENT event and returns the buffer after
the check for events but before the check for buffers, vb2_m2m_poll()
will signal that the buffer with V4L2_BUF_FLAG_LAST can be read but not
that the V4L2_EOS_EVENT is available.

Split the check for buffers into a separate function and check for
available buffers before checking for events. This ensures that if
vb2_m2m_poll() signals POLLIN | POLLRDNORM for the V4L2_BUF_FLAG_LAST
buffer, it signals POLLPRI for the V4L2_EOS_EVENT, too.
Signed-off-by: NMichael Tretter <m.tretter@pengutronix.de>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch alignment warning]
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The function v4l_pix_format_touch() is called for S_FMT to set
v4l2_pix_format fields to default values for a v4l-touch device,
but it wasn't called for TRY_FMT. Add this.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Only one field needs to be validated: 'num_dct_parts'.
This field is used to iterate over the user-provided array
'dct_part_sizes'.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
[hverkuil-cisco@xs4all.nl: s -> (s) in zero_padding macro]
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add the parsed VP8 frame pixel format and controls, to be used
with the new stateless decoder API for VP8 to provide parameters
for accelerator (aka stateless) codecs.
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NNicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Rework std_validate moving the compound controls to
its own validation function.

While here, fix the pointer math to account the index parameter.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The v4l_fill_fmtdesc() is supposed to be updated whenever a new pixelformat
is added, but a bunch of recently added pixelformats were forgotten.

Update the list.

Also change a few lower case words to upper case to keep the same style.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
[hverkuil-cisco@xs4all.nl: changed 1-5-5-5 to 5-5-5-1 as per Laurent's suggestion]
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

sd->entity.graph_obj.mdev can be NULL when this function is called, and
that breaks existing drivers (rcar-vin, but probably others as well).

Check if sd->entity.num_pads is non-zero instead since that doesn't depend
on mdev.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Fixes: a8fa5507 ("media: v4l2-subdev: Verify arguments in v4l2_subdev_call()")
Tested-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

cfg->type can be overridden by v4l2_ctrl_fill() and the new value is
stored in the local type var. Fix the tests to use this local var.

Fixes: 0996517c ("V4L/DVB: v4l2: Add new control handling framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: NBoris Brezillon <boris.brezillon@collabora.com>
[hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)]
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Rework std_init adding an explicit initialization for
compound controls.

While here, make sure the control is initialized to zero,
before providing default values for all its fields.
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Extend parameter checks performed by v4l2_subdev_call() with a check for
a non-NULL pad config pointer if V4L2_SUBDEV_FORMAT_TRY format type is
requested so drivers don't need to care.
Signed-off-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Parameters passed to check helpers are now obtained by dereferencing
unverified pointer arguments.  Check validity of those pointers first.
Signed-off-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Correctness of format type (try or active) and pad number parameters
passed to subdevice operation callbacks is now verified only for IOCTL
calls.  However, those callbacks are also used by drivers, e.g., V4L2
host interfaces.

Since both subdev_do_ioctl() and drivers are using v4l2_subdev_call()
macro while calling subdevice operations, move those parameter checks
from subdev_do_ioctl() to v4l2_subdev_call() so we can avoid taking care
of those checks inside drivers.

Define a wrapper function for each operation callback in scope, then
gather those wrappers in a static v4l2_subdev_ops structure so the
v4l2_subdev_call() macro can find them easy if provided.
Signed-off-by: NJanusz Krzysztofik <jmkrzyszt@gmail.com>
Reviewed-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

PTR_ERR(NULL) yields 0 which is commonly used to denote success. This is
the case here, and PTR_ERR(NULL) is apparently shunned upon. Fix this by
explicitly returning 0 if fwnode == NULL.
Reported-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

These two control types don't really need a default value,
as they are not expected to carry any value.

However, it's slightly clearer to initialize them explicitly
instead of falling back to the switch default.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEnrico Weigelt <info@metux.net>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 8 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NEnrico Weigelt <info@metux.net>
Reviewed-by: NAlexios Zavras <alexios.zavras@intel.com>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204654.096873163@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add SPDX headers and fix MODULE_LICENSE() when needed on
some files I co-authored.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

CAP_M2M_MPLANE means the device supports _MPLANE formats for both
capture and output. Adjust the check to avoid EINVAL errors on
such devices.
Reported-by: NMaxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch shouldn't have been included in the pull request as it adds
a non-standard raw mode that is for debugging only. So revert
commit ead14a70.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Most if not all codecs will need to implement these ioctls and
it is expected to be the same for all codecs. So add this to
the core v4l2-mem2mem framework so that this code can easily be
reused.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Support for multiplanar and singleplanar formats is mutually exclusive,
at least in practice. In our attempt to unify support for support for
mplane and !mplane in v4l, let's get rid of the
->vidioc_enum_fmt_{vid,out}_cap_mplane() hooks and call
->vidioc_enum_fmt_{vid,out}_cap() instead.
Signed-off-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
[hverkuil-cisco@xs4all.nl: fix typos: pirv -> priv and prov -> priv]
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of version 2 of the gnu general public license as
  published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 107 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Reviewed-by: NRichard Fontana <rfontana@redhat.com>
Reviewed-by: NSteve Winslow <swinslow@gmail.com>
Reviewed-by: NAlexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NRichard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Reviewed-by: NRichard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The size of the vma can be larger than the size of the backing buffer.
Use the buffer size over vma size to prevent exposing extra memory
to userspace.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Reviewed-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>