The VLAN support in mv88e6xxx has a loaded history. Commit 2ea7a679
("net: dsa: Don't add vlans when vlan filtering is disabled") noticed
some issues with VLAN and decided the best way to deal with them was to
make the DSA core ignore VLANs added by the bridge while VLAN awareness
is turned off. Those issues were never explained, just presented as
"at least one corner case".

That approach had problems of its own, presented by
commit 54a0ed0d ("net: dsa: provide an option for drivers to always
receive bridge VLANs") for the DSA core, followed by
commit 1fb74191 ("net: dsa: mv88e6xxx: fix vlan setup") which
applied ds->configure_vlan_while_not_filtering = true for mv88e6xxx in
particular.

We still don't know what corner case Andrew saw when he wrote
commit 2ea7a679 ("net: dsa: Don't add vlans when vlan filtering is
disabled"), but Tobias now reports that when we use TX forwarding
offload, pinging an external station from the bridge device is broken if
the front-facing DSA user port has flooding turned off. The full
description is in the link below, but for short, when a mv88e6xxx port
is under a VLAN-unaware bridge, it inherits that bridge's pvid.
So packets ingressing a user port will be classified to e.g. VID 1
(assuming that value for the bridge_default_pvid), whereas when
tag_dsa.c xmits towards a user port, it always sends packets using a VID
of 0 if that port is standalone or under a VLAN-unaware bridge - or at
least it did so prior to commit d82f8ab0 ("net: dsa: tag_dsa:
offload the bridge forwarding process").

In any case, when there is a conversation between the CPU and a station
connected to a user port, the station's MAC address is learned in VID 1
but the CPU tries to transmit through VID 0. The packets reach the
intended station, but via flooding and not by virtue of matching the
existing ATU entry.

DSA has established (and enforced in other drivers: sja1105, felix,
mt7530) that a VLAN-unaware port should use a private pvid, and not
inherit the one from the bridge. The bridge's pvid should only be
inherited when that bridge is VLAN-aware, so all state transitions need
to be handled. On the other hand, all bridge VLANs should sit in the VTU
starting with the moment when the bridge offloads them via switchdev,
they are just not used.

This solves the problem that Tobias sees because packets ingressing on
VLAN-unaware user ports now get classified to VID 0, which is also the
VID used by tag_dsa.c on xmit.

Fixes: d82f8ab0 ("net: dsa: tag_dsa: offload the bridge forwarding process")
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20211003222312.284175-2-vladimir.oltean@nxp.com/#24491503Reported-by: NTobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc.
Signed-off-by: NHerve Codina <herve.codina@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some old IPs do not provide the hardware feature register.
On these IPs, this register is read 0x00000000.

In old driver version, this feature was handled but a regression came
with the commit f10a6a35 ("stmmac: rework get_hw_feature function").
Indeed, this commit removes the return value in dma->get_hw_feature().
This return value was used to indicate the validity of retrieved
information and used later on in stmmac_hw_init() to override
priv->plat data if this hardware feature were valid.

This patch restores the return code in ->get_hw_feature() in order
to indicate the hardware feature validity and override priv->plat
data only if this hardware feature is valid.

Fixes: f10a6a35 ("stmmac: rework get_hw_feature function")
Signed-off-by: NHerve Codina <herve.codina@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The crit_lock mutex could be unlocked twice as reported here
https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20210823/025525.html

Remove the superfluous unlock. Technically the problem was already
present before 5ac49f3c as that commit only replaced the locking
primitive, but no functional change.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections")
Fixes: bac84861 ("iavf: Refactor the watchdog state machine")
Signed-off-by: NStefan Assmann <sassmann@kpanic.de>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

When VSI set up failed in i40e_probe() as part of PF switch set up
driver was trying to free misc IRQ vectors in
i40e_clear_interrupt_scheme and produced a kernel Oops:

   Trying to free already-free IRQ 266
   WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300
   Workqueue: events work_for_cpu_fn
   RIP: 0010:__free_irq+0x9a/0x300
   Call Trace:
   ? synchronize_irq+0x3a/0xa0
   free_irq+0x2e/0x60
   i40e_clear_interrupt_scheme+0x53/0x190 [i40e]
   i40e_probe.part.108+0x134b/0x1a40 [i40e]
   ? kmem_cache_alloc+0x158/0x1c0
   ? acpi_ut_update_ref_count.part.1+0x8e/0x345
   ? acpi_ut_update_object_reference+0x15e/0x1e2
   ? strstr+0x21/0x70
   ? irq_get_irq_data+0xa/0x20
   ? mp_check_pin_attr+0x13/0xc0
   ? irq_get_irq_data+0xa/0x20
   ? mp_map_pin_to_irq+0xd3/0x2f0
   ? acpi_register_gsi_ioapic+0x93/0x170
   ? pci_conf1_read+0xa4/0x100
   ? pci_bus_read_config_word+0x49/0x70
   ? do_pci_enable_device+0xcc/0x100
   local_pci_probe+0x41/0x90
   work_for_cpu_fn+0x16/0x20
   process_one_work+0x1a7/0x360
   worker_thread+0x1cf/0x390
   ? create_worker+0x1a0/0x1a0
   kthread+0x112/0x130
   ? kthread_flush_work_fn+0x10/0x10
   ret_from_fork+0x1f/0x40

The problem is that at that point misc IRQ vectors
were not allocated yet and we get a call trace
that driver is trying to free already free IRQ vectors.

Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED
PF state before calling i40e_free_misc_vector. This state is set only if
misc IRQ vectors were properly initialized.

Fixes: c17401a1 ("i40e: use separate state bit for miscellaneous IRQ setup")
Reported-by: NPJ Waskiewicz <pwaskiewicz@jumptrading.com>
Signed-off-by: NSylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: NDave Switzer <david.switzer@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The loop in i40e_get_capabilities can never end. The problem is that
although i40e_aq_discover_capabilities returns with an error if there's
a firmware problem, the returned error is not checked. There is a check for
pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most
firmware problems.

When i40e_aq_discover_capabilities encounters a firmware problem, it will
encounter the same problem on its next invocation. As the result, the loop
becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking
at the code, it can happen with a range of other firmware errors.

I don't know what the correct behavior should be: whether the firmware
should be retried a few times, or whether pf->hw.aq.asq_last_status should
be always set to the encountered firmware error (but then it would be
pointless and can be just replaced by the i40e_aq_discover_capabilities
return value). However, the current behavior with an endless loop under the
rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we
explained the bug to them 7 months ago.

This may not be the best possible fix but it's better than hanging the whole
system on a firmware bug.

Fixes: 56a62fc8 ("i40e: init code and hardware support")
Tested-by: NStefan Assmann <sassmann@redhat.com>
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NDave Switzer <david.switzer@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Move the setting of the filter-sync-needed bit to the error
case in the filter add routine to be sure we're checking the
live filter status rather than a copy of the pre-sync status.

Fixes: 969f8439 ("ionic: sync the filters in the work task")
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each tx queue maintains a 64bit counter for bytes, there is
no reason to truncate this to 32bit (or this has not been
documented)

Fixes: 24aeb56f ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Yangchun Fu <yangchun@google.com>
Cc: Kuo Zhao <kuozhao@google.com>
Cc: David Awogbemila <awogbemila@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gve_get_stats() can report wrong numbers if/when u64_stats_fetch_retry()
returns true.

What is needed here is to sample values in temporary variables,
and only use them after each loop is ended.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Catherine Sullivan <csully@google.com>
Cc: Sagi Shahar <sagis@google.com>
Cc: Jon Olson <jonolson@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Luigi Rizzo <lrizzo@google.com>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Tao Liu <xliutaox@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ignored errors would result in crash.

Fixes: ede3fcf5 ("gve: Add support for raw addressing to the rx path")
Signed-off-by: NCatherine Sullivan <csully@google.com>
Signed-off-by: NJeroen de Borst <jeroendb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent possible crashes when cleaning up after unsuccessful
initializations.

Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: NTao Liu <xliutaox@google.com>
Signed-off-by: NCatherine Sully <csully@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The qpl_map_size is rounded up to a multiple of sizeof(long), but the
number of qpls doesn't have to be.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: NCatherine Sullivan <csully@google.com>
Signed-off-by: NJeroen de Borst <jeroendb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current implementation enable PCS EEE feature in the event of link
up, but PCS EEE feature is not disabled on link down.

This patch makes sure PCE EEE feature is disabled on link down.

Fixes: 656ed8b0 ("net: stmmac: fix EEE init issue when paired with EEE capable PHYs")
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When Energy-Efficient Ethernet(EEE) is disable from the MAC side,
we need to clear the DW_VR_MII_EEE_TRN_LPI bit of DW_VR_MII_EEE_MCTRL1
register.

Fixes: 7617af3d ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to Synopsys DesignWare Cores Ethernet PCS databook, it is
required to disable Clause 37 auto-negotiation by programming bit-12
(AN_ENABLE) to 0 if it is already enabled, before programming various
fields of VR_MII_AN_CTRL registers.

After all these programming are done, it is then required to enable
Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 1.

Fixes: b97b5331 ("net: pcs: add C37 SGMII AN support for intel mGbE controller")
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The string should be "tx_disable" to match the state enum.

Fixes: 4005a7cb ("net: phy: sftp: print debug message with text, not numbers")
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the situation that the disconnect event comes very late when the
device is unplugged, the driver would resubmit the RX bulk transfer
after getting the callback with -EPROTO immediately and continually.
Finally, soft lockup occurs.

This patch avoids to resubmit RX immediately. It uses a workqueue to
schedule the RX NAPI. And the NAPI would resubmit the RX. It let the
disconnect event have opportunity to stop the submission before soft
lockup.
Reported-by: NJason-ch Chen <jason-ch.chen@mediatek.com>
Tested-by: NJason-ch Chen <jason-ch.chen@mediatek.com>
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 2d26f6e3 ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings")
while getting rid of a runtime PM warning ended up breaking ethernet
on rk3399 based devices. By dropping an extra reference to the device,
the commit ends up enabling suspend / resume of the ethernet device -
which appears to be broken.

While the issue with runtime pm is being investigated, partially
revert commit 2d26f6e3 to restore the network on rk3399.

Fixes: 2d26f6e3 ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings")
Suggested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NPunit Agrawal <punitagrawal@gmail.com>
Cc: Michael Riesch <michael.riesch@wolfvision.net>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210929135049.3426058-1-punitagrawal@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When ocelot_flower.c calls ocelot_vcap_filter_add(), the filter has a
given filter->id.cookie. This filter is added to the block->rules list.

However, when ocelot_flower.c calls ocelot_vcap_block_find_filter_by_id()
which passes the cookie as argument, the filter is never found by
filter->id.cookie when searching through the block->rules list.

This is unsurprising, since the filter->id.cookie is an unsigned long,
but the cookie argument provided to ocelot_vcap_block_find_filter_by_id()
is a signed int, and the comparison fails.

Fixes: 50c6cc5b ("net: mscc: ocelot: store a namespaced VCAP filter ID")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210930125330.2078625-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Syzbot reported memory leak in MDIO bus interface, the problem was in
wrong state logic.

MDIOBUS_ALLOCATED indicates 2 states:
	1. Bus is only allocated
	2. Bus allocated and __mdiobus_register() fails, but
	   device_register() was called

In case of device_register() has been called we should call put_device()
to correctly free the memory allocated for this device, but mdiobus_free()
calls just kfree(dev) in case of MDIOBUS_ALLOCATED state

To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED
_before_ calling device_register(), because put_device() should be
called even in case of device_register() failure.

Link: https://lore.kernel.org/netdev/YVMRWNDZDUOvQjHL@shell.armlinux.org.uk/
Fixes: 46abc021 ("phylib: give mdio buses a device tree presence")
Reported-and-tested-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

This reverts commit ab609f25.

This patch is correct in the sense that we _should_ call device_put() in
case of device_register() failure, but the problem in this code is more
vast.

We need to set bus->state to UNMDIOBUS_REGISTERED before calling
device_register() to correctly release the device in mdiobus_free().
This patch prevents us from doing it, since in case of device_register()
failure put_device() will be called 2 times and it will cause UAF or
something else.

Also, Reported-by: tag in revered commit was wrong, since syzbot
reported different leak in same function.

Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/Acked-by: NYanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

TX-port-TS hijacks the PTP traffic to a specific HW TX-queue. This
conflicts with MQPRIO in channel mode, which specifies explicitly which
TC accepts the packet. This patch mutually excludes the above
configuration.

Fixes: ec60c458 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

PTP-RQ counters title format contains PTP-RQ identifier, which is
mistakenly not passed to sprinft().
This leads to unexpected garbage values instead.
This patch fixes it.

Before applying the patch:
ethtool -S eth3 | grep ptp_rq
     ptp_rq15_packets: 0
     ptp_rq8_bytes: 0
     ptp_rq6_csum_complete: 0
     ptp_rq14_csum_complete_tail: 0
     ptp_rq3_csum_complete_tail_slow : 0
     ptp_rq9_csum_unnecessary: 0
     ptp_rq1_csum_unnecessary_inner: 0
     ptp_rq7_csum_none: 0
     ptp_rq10_xdp_drop: 0
     ptp_rq9_xdp_redirect: 0
     ptp_rq13_lro_packets: 0
     ptp_rq12_lro_bytes: 0
     ptp_rq10_ecn_mark: 0
     ptp_rq9_removed_vlan_packets: 0
     ptp_rq5_wqe_err: 0
     ptp_rq8_mpwqe_filler_cqes: 0
     ptp_rq2_mpwqe_filler_strides: 0
     ptp_rq5_oversize_pkts_sw_drop: 0
     ptp_rq6_buff_alloc_err: 0
     ptp_rq15_cqe_compress_blks: 0
     ptp_rq2_cqe_compress_pkts: 0
     ptp_rq2_cache_reuse: 0
     ptp_rq12_cache_full: 0
     ptp_rq11_cache_empty: 256
     ptp_rq12_cache_busy: 0
     ptp_rq11_cache_waive: 0
     ptp_rq12_congst_umr: 0
     ptp_rq11_arfs_err: 0
     ptp_rq9_recover: 0

After applying the patch:
ethtool -S eth3 | grep ptp_rq
     ptp_rq0_packets: 0
     ptp_rq0_bytes: 0
     ptp_rq0_csum_complete: 0
     ptp_rq0_csum_complete_tail: 0
     ptp_rq0_csum_complete_tail_slow : 0
     ptp_rq0_csum_unnecessary: 0
     ptp_rq0_csum_unnecessary_inner: 0
     ptp_rq0_csum_none: 0
     ptp_rq0_xdp_drop: 0
     ptp_rq0_xdp_redirect: 0
     ptp_rq0_lro_packets: 0
     ptp_rq0_lro_bytes: 0
     ptp_rq0_ecn_mark: 0
     ptp_rq0_removed_vlan_packets: 0
     ptp_rq0_wqe_err: 0
     ptp_rq0_mpwqe_filler_cqes: 0
     ptp_rq0_mpwqe_filler_strides: 0
     ptp_rq0_oversize_pkts_sw_drop: 0
     ptp_rq0_buff_alloc_err: 0
     ptp_rq0_cqe_compress_blks: 0
     ptp_rq0_cqe_compress_pkts: 0
     ptp_rq0_cache_reuse: 0
     ptp_rq0_cache_full: 0
     ptp_rq0_cache_empty: 256
     ptp_rq0_cache_busy: 0
     ptp_rq0_cache_waive: 0
     ptp_rq0_congst_umr: 0
     ptp_rq0_arfs_err: 0
     ptp_rq0_recover: 0

Fixes: a28359e9 ("net/mlx5e: Add PTP-RX statistics")
Signed-off-by: NLama Kayal <lkayal@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When setting number of completion EQs of the SF, consider number of
online CPUs.
Without this consideration, when number of online cpus are less than 8,
unnecessary 8 completion EQs are allocated.

Fixes: c36326d3 ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: NShay Drory <shayd@nvidia.com>
Reviewed-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The maximum irq_index can be 2047, This means irq_name should have 4
characters reserve for the irq_index. Hence, increase it to 4.

Fixes: 3af26495 ("net/mlx5: Enlarge interrupt field in CREATE_EQ")
Signed-off-by: NShay Drory <shayd@nvidia.com>
Reviewed-by: NParav Pandit <parav@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When in Real-time mode, HW clock is synced with the PTP daemon. Hence
driver should not re-calibrate the next pulse (via MTPPSE repetitive
events mechanism).

This patch arms repetitive events only in free-running mode.

Fixes: 432119de ("net/mlx5: Add cyc2time HW translation mode support")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Reviewed-by: NEran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Allow configuration of 1PPS start time only with time-stamp representing
a round second. Prior to this patch driver allowed setting of a
non-round-second which is not supported by the device. Avoid unexpected
behavior by restricting start-time configuration to a round-second.

Fixes: 4272f9b8 ("net/mlx5e: Change 1PPS out scheme")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Reviewed-by: NEran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Flow counter is allocated in eswitch legacy acl setting functions
without checking if already allocated by previous setting. Add a check
to avoid such double allocation.

Fixes: 07bab950 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Fixes: ea651a86 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes")
Signed-off-by: NMoshe Shemesh <moshe@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

* Add netdev->tc_to_txq rollback in case of failure in
  mlx5e_update_netdev_queues().
* Fix broken transition between the two modes:
  MQPRIO DCB mode with tc==8, and MQPRIO channel mode.
* Disable MQPRIO channel mode if re-attaching with a different number
  of channels.
* Improve code sharing.

Fixes: ec60c458 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The value for maximum number of channels is first calculated based
on the netdev's profile and current function resources (specifically,
number of MSIX vectors, which depends among other things on the number
of online cores in the system).
This value is then used to calculate the netdev's number of rxqs/txqs.
Once created (by alloc_etherdev_mqs), the number of netdev's rxqs/txqs
is constant and we must not exceed it.

To achieve this, keep the maximum number of channels in sync upon any
netdevice re-attach.

Use mlx5e_get_max_num_channels() for calculating the number of netdev's
rxqs/txqs. After netdev is created, use mlx5e_calc_max_nch() (which
coinsiders core device resources, profile, and netdev) to init or
update priv->max_nch.

Before this patch, the value of priv->max_nch might get out of sync,
mistakenly allowing accesses to out-of-bounds objects, which would
crash the system.

Track the number of channels stats structures used in a separate
field, as they are persistent to suspend/resume operations. All the
collected stats of every channel index that ever existed should be
preserved. They are reset only when struct mlx5e_priv is,
in mlx5e_priv_cleanup(), which is part of the profile changing flow.

There is no point anymore in blocking a profile change due to max_nch
mismatch in mlx5e_netdev_change_profile(). Remove the limitation.

Fixes: a1f240f1 ("net/mlx5e: Adjust to max number of channles when re-attaching")
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NAya Levin <ayal@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently in Rx data path IPsec crypto offloaded packets uses
csum_none flag, so checksum is handled by the stack, this naturally
have some performance/cpu utilization impact on such flows. As Nvidia
NIC starting from ConnectX6DX provides checksum complete value out of
the box also for such flows there is no sense in taking csum_none path,
furthermore the stack (xfrm) have the method to handle checksum complete
corrections for such flows i.e. IPsec trailer removal and consequently
checksum value adjustment.

Because of the above and in addition the ConnectX6DX is the first HW
which supports IPsec crypto offload then it is safe to report csum
complete for IPsec offloaded traffic.

Fixes: b2ac7541 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload")
Signed-off-by: NRaed Salem <raeds@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY,
and the PHY is advertising EEE by default, we need to enable EEE on the
xPCS side too, instead of having user to manually trigger the enabling
config via ethtool.

Fixed this by adding xpcs_config_eee() call in stmmac_eee_init().

Fixes: 7617af3d ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: NWong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When EEE support was added to the 28nm EPHY it was assumed that it would
be able to support the standard clause 45 over clause 22 register access
method. It turns out that the PHY does not support that, which is the
very reason for using the indirect shadow mode 2 bank 3 access method.

Implement {read,write}_mmd to allow the standard PHY library routines
pertaining to EEE querying and configuration to work correctly on these
PHYs. This forces us to implement a __phy_set_clr_bits() function that
does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd
functions are always called with that lock held.

Fixes: 83ee102a ("net: phy: bcm7xxx: add support for 28nm EPHY")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the firmware compatible features are enabled in PF driver
initialization process, but they are not disabled in PF driver
deinitialization process and firmware keeps these features in enabled
status.

In this case, if load an old PF driver (for example, in VM) which not
support the firmware compatible features, firmware will still send mailbox
message to PF when link status changed and PF will print
"un-supported mailbox message, code = 201".

To fix this problem, disable these firmware compatible features in PF
driver deinitialization process.

Fixes: ed8fb4b2 ("net: hns3: add link change event report")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.

However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.

Fixes: bcc26e8d ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If unicast mac address table is full, and user add a new mac address, the
unicast promisc needs to be enabled for the new unicast mac address can be
used. So does the multicast promisc.

Now this feature has been implemented for PF, and VF should be implemented
too. When the mac table of VF is overflow, PF will enable promisc for this
VF.

Fixes: 1e6e7610 ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, if function adds an existing unicast mac address, eventhough
driver will not add this address into hardware, but it will return 0 in
function hclge_add_uc_addr_common(). It will cause the state of this
unicast mac address is ACTIVE in driver, but it should be in TO-ADD state.

To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST
if mac address is existing, and delete two error log to avoid printing
them all the time after this modification.

Fixes: 72110b56 ("net: hns3: return 0 and print warning when hit duplicate MAC")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable
multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is
supposed to set when enable multiple TCs with ets. But
the driver mixed the flags when updating the tm configuration.

Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE
too, so remove the unnecessary limitation.

Fixes: 5a5c9091 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For destroy mqprio is irreversible in stack, so it's unnecessary
to rollback the tc configuration when destroy mqprio failed.
Otherwise, it may cause the configuration being inconsistent
between driver and netstack.

As the failure is usually caused by reset, and the driver will
restore the configuration after reset, so it can keep the
configuration being consistent between driver and hardware.

Fixes: 5a5c9091 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, in function hns3_nic_set_real_num_queue(), the
driver doesn't report the queue count and offset for disabled
tc. If user enables multiple TCs, but only maps user
priorities to partial of them, it may cause the queue range
of the unmapped TC being displayed abnormally.

Fix it by removing the tc enable checking, ensure the queue
count is not zero.

With this change, the tc_en is useless now, so remove it.

Fixes: a75a8efa ("net: hns3: Fix tc setup when netdev is first up")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>