While I'm in here, cut this out, pdev can't be NULL
Reviewed-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-2-sean@poorly.run

The 10nm pll driver didn't have any failure-path cleanup in register,
and the destroy function didn't unregister any of the hardware. This
patch adds both.

The reason things haven't been blowing up horribly is that msm_drv has a
reference count issue that keeps devices alive, so the destroy function
was never called. That will be fixed in a follow-up patch.
Reviewed-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-1-sean@poorly.run

We have if (!phy->pll) checks scattered through the driver and if
phy->pll is an error pointer, those checks will pass and bad things will
happen :(
Reviewed-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617200920.133104-1-sean@poorly.run

Fix the error paths in _dpu_kms_mmu_init() to properly
clean up the iommu domain and not call _dpu_kms_mmu_destroy() when
things are only partially setup.
Reviewed-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617200405.131843-2-sean@poorly.run

Now that mode_fixup has been removed, we can just rely on the call
from drm_helper_probe_single_connector_modes(),
Reviewed-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617200405.131843-1-sean@poorly.run

The interconnect API provides an interface for consumer drivers to
express their bandwidth needs in the SoC. This data is aggregated
and the on-chip interconnect hardware is configured to the most
appropriate power/performance profile.

Use the API to configure the interconnects and request bandwidth
between DDR and the display hardware (MDP port(s) and rotator
downscaler).

v2: update the path names to be consistent with dpu, handle the NULL
    path case, updated commit msg from Georgi.
v3: split out icc setup into it's own function, and rework logic
    slightly so no interconnect paths is not fatal.
Signed-off-by: NGeorgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>
Reviewed-By: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>

dpu_mdss_destroy() can get called not just from
msm_drm_uninit() but also from msm_drm_bind() in case
of any failures.

dpu_mdss_destroy() removes the icc voting by calling
icc_put. This could accidentally remove the voting
done by pm_runtime_enable.

To make the voting balanced add a minimum vote in
dpu_mdss_init() to avoid any unclocked access.

This change depends on the following patch which
introduces interconnect binding to MDSS driver:

https://patchwork.codeaurora.org/patch/708155/Signed-off-by: NAbhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NRob Clark <robdclark@chromium.org>

Add interconnect properties such as interconnect provider specifier
, the edge source and destination ports which are required by the
interconnect API to configure interconnect path for MDSS.

Changes in v2:
	- None

Changes in v3:
	- Remove common property definitions (Rob Herring)

Changes in v4:
	- Use port macros and change port string names (Georgi Djakov)

Changes in v5-v7:
	- None
Signed-off-by: NSravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: NJayant Shekhar <jshekhar@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

The interconnect framework is designed to provide a
standard kernel interface to control the settings of
the interconnects on a SoC.

The interconnect API uses a consumer/provider-based model,
where the providers are the interconnect buses and the
consumers could be various drivers.

MDSS is one of the interconnect consumers which uses the
interconnect APIs to get the path between endpoints and
set its bandwidth requirement for the given interconnected
path.

Changes in v2:
	- Remove error log and unnecessary check (Jordan Crouse)

Changes in v3:
	- Code clean involving variable name change, removal
	  of extra paranthesis and variables (Matthias Kaehlcke)

Changes in v4:
	- Add comments, spacings, tabs, proper port name
	  and icc macro (Georgi Djakov)

Changes in v5:
	- Commit text and parenthesis alignment (Georgi Djakov)

Changes in v6:
	- Change to new icc_set API's (Doug Anderson)

Changes in v7:
	- Fixed a typo

Changes in v8:
	- Handle the of_icc_get() returning NULL case.  In practice
	  icc_set_bw() will gracefully handle the case of a NULL path,
	  but it's probably best for clarity to keep num_paths=0 in
	  this case.
Signed-off-by: NSravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: NJayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>
Acked-by: NGeorgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: NSean Paul <sean@poorly.run>

Since the upstream interconnect bus framework has landed
upstream, the existing references of custom bus scaling
needs to be cleaned up.

Changes in v2:
	- Fixed build error due to partial clean up

Changes in v3:
	- Condense multiple lines into a single line (Sean Paul)

Changes in v4-v7:
	- None
Signed-off-by: NSravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: NJayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>
Reviewed-by: NSean Paul <sean@poorly.run>

Clang warns:

drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: warning: logical not is
only applied to the left hand side of this bitwise operator
[-Wlogical-not-parentheses]
        if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
            ^                 ~
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: note: add parentheses
after the '!' to evaluate the bitwise operator first
        if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
            ^
             (                                               )
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c:80:6: note: add parentheses
around left hand side expression to silence this warning
        if (!phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK) {
            ^
            (                )
1 warning generated.

Add parentheses around the bitwise AND so it is evaluated first then
negated.

Fixes: 3dbbf8f0 ("drm/msm/dsi: Add old timings quirk for 10nm phy")
Link: https://github.com/ClangBuiltLinux/linux/issues/547Reported-by: Nkbuild test robot <lkp@intel.com>
Reviewed-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

The A540 is a derivative of the A530, and is found in the MSM8998 SoC.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

put_iova() would attempt to dereference a NULL pointer via the
address space pointer when no IOMMU is present. Correct this by adding
the appropriate check.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

When panel probe happens after DSI probe, the DSI probe is deferred as
per current design. In the probe defer path dsi device is destroyed.
This NULL dsi device could be deferenced by the panel probe in the
mipi_dsi_attach path.

Check for NULL dsi device before accessing it.

Changes in v2:
 - Add more comments on how this NULL pointer situation will be hit
Reported-by: NJeffrey Hugo <jhugo@codeaurora.org>
Tested-by: NJeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: NAbhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

Before loading the zap shader we should ensure that the reserved memory
region is big enough to hold the loaded file.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

The DSI controller on the MSM8998 SoC is a 6G v2.0.0 controller which is
very similar to the v2.0.1 of SDM845.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

The v3.0.0 10nm phy has two different implementations between MSM8998 and
SDM845, which require different timings calculations.  Unfortunately, the
hardware designers did not choose to revise the version to account for this
delta so implement a quirk instead.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

The MSM8998 dsi phy is 10nm v3.0.0 like SDM845, however there appear to
be minor differences such as the address space location.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

The DSI phy on MSM8998 is a 10nm design like SDM845, however it has some
slightly different quirks which need to be handled by drivers.  Provide
a separate compatible to assist in handling the specifics.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

If mdp5_cfg_init fails because of an unknown major version, a null pointer
dereference occurs.  This is because the caller of init expects error
pointers, but init returns NULL on error.  Fix this by returning the
expected values on error.

Fixes: 2e362e17 (drm/msm/mdp5: introduce mdp5_cfg module)
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

The GPU specific pm_suspend code assumes that the hardware is active
when the function is called, which it usually is when called as part
of pm_runtime.  But during unbind, the pm_suspend functions are called
blindly resulting in a bit of a when the hardware wasn't already
active (or booted, in the case of the GMU).

Instead of calling the pm_suspend function directly, use
pm_runtime_force_suspend() which should check the correct state of
runtime and call the functions on our behalf or skip them if they are
not needed.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

In the failure path for dpu_kms_init() it is possible to get to the MMU
destroy function with uninitialized MMU structs. Check for NULL and skip
if needed.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NKristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

If enabling clocks fails in msm_dss_enable_clk() the code to unwind the
settings starts at 'i' which is the clock that just failed. While this
isn't harmful it does result in a number of warnings from the clock
subsystem while trying to unpreare/disable the very clock that had
just failed to prepare/enable. Skip the current failed clock during
the unwind to to avoid the extra log spew.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

Pass the index of the MMU domain in struct msm_file_private instead
of assuming gpu->id throughout the submit path. This clears the way
to change ctx->aspace to a per-instance pagetable.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

When we move to 64 bit addressing for a5xx and a6xx targets we will start
seeing pagefaults at larger addresses so format them appropriately in the
log message for easier debugging.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NKristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

A5XX and newer GPUs can be run in either 32 or 64 bit mode. The GPU
registers and the microcode use 64 bit virtual addressing in either
case but the upper 32 bits are ignored if the GPU is in 32 bit mode.
There is no performance disadvantage to remaining in 64 bit mode even
if we are only generating 32 bit addresses so switch over now to prepare
for using addresses above 4G on targets that support them.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
[small fixup for unused variable warning]
Signed-off-by: NRob Clark <robdclark@chromium.org>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Cc: Fritz Koenig <frkoenig@google.com>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

Clang produces the following warning

drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:477:32: warning: unused
variable 'dpu_format_map_tile' [-Wunused-const-variable] static const
struct dpu_format dpu_format_map_tile[] = { ^

drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:602:32: warning: unused
variable 'dpu_format_map_p010' [-Wunused-const-variable] static const
struct dpu_format dpu_format_map_p010[] = { ^

drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:610:32: warning: unused
variable 'dpu_format_map_p010_ubwc' [-Wunused-const-variable] static
const struct dpu_format dpu_format_map_p010_ubwc[] = { ^

drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:619:32: warning: unused
variable 'dpu_format_map_tp10_ubwc' [-Wunused-const-variable] static
const struct dpu_format dpu_format_map_tp10_ubwc[] = { ^

Removing the unimplemented modifiers that cause the warning.

Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/528Signed-off-by: NNathan Huckleberry <nhuck@google.com>
Signed-off-by: NRob Clark <robdclark@chromium.org>

wait_for_completion_timeout() returns 0 on timeout and aleast 1 otherwise
so checking for < makes no sense here.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: NAbhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>

This comment doesn't make any sense, remove it.
Suggested-by: NJordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528182657.246714-1-sean@poorly.run

Fold it into dpu_debugfs_init.

Cc: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: NAbhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524173231.5040-2-sean@poorly.run

Instead of reaching into dev->primary for debugfs_root, use the minor
passed into debugfs_init.

This avoids creating the debug directory under /sys/kernel/debug/ and
instead creates the directory under the correct node in
/sys/kernel/debug/dri/<node>/
Reported-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NAbhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524173231.5040-1-sean@poorly.run

This rename makes it more clear that everything initialized in the _init
function must be cleaned up in a6xx_gmu_remove. This will hopefully
dissuade people from using device managed resources (for reasons laid
out in the previous patch).

Changes in v2:
- None

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-6-sean@poorly.run

of_find_device_by_node() grabs a dev reference, so make sure we clear it
on error and remove.

Changes in v2:
- Added to the set (Jordan)

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-5-sean@poorly.run

The gmu driver is initialized and cleaned up with calls from the gpu driver. As
such, the platform device stays valid after a6xx_gmu_remove is called and the
device managed resources are not freed. In the case of gpu probe failures or
unbind, these resources will remain managed.

If the gpu bind is run again (eg: if there's a probe defer somewhere in msm),
these resources will be initialized again for the same device, creating multiple
references. In the case of irqs, this causes failures since the irqs are
not shared (nor should they be).

This patch removes all devm_* calls and manually cleans things up in
gmu_remove.

Changes in v2:
- Add iounmap and free_irq to gmu_probe error paths

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-4-sean@poorly.run

pdcptr and seqptr aren't necessarily valid, check them before trying to
unmap them.

Changes in v2:
- None

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-3-sean@poorly.run

a6xx_gmu_stop() already calls this function via shutdown or force_stop,
so it's not necessary to call it twice. Previously this would have
knocked the irq refcount out of sync, but now with the irqs_enabled flag
it's just housekeeping.

Changes in v2:
- None

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-2-sean@poorly.run

The driver checks for gmu->mmio as a sign that the device has been
initialized, however there are failures in probe below the mmio init.
If one of those is hit, mmio will be non-null but freed.

In that case, a6xx_gmu_probe will return an error to a6xx_gpu_init which
will in turn call a6xx_gmu_remove which checks gmu->mmio and tries to free
resources for a second time. This causes a great boom.

Fix this by adding an initialized member to gmu which is set on
successful probe and cleared on removal.

Changes in v2:
- None

Cc: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523171653.138678-1-sean@poorly.run