There are quite some BUG_ON()s inside btrfs_submit_compressed_read(),
namely all errors inside the for() loop relies on BUG_ON() to handle
-ENOMEM.

Handle these errors properly by:

- Wait for submitted bios to finish first
  Using wake_var_event() APIs to wait without introducing extra memory
  overhead inside compressed_bio.
  This allows us to wait for any submitted bio to finish, while still
  keeps the compressed_bio from being freed.

- Introduce finish_compressed_bio_read() to finish the compressed_bio

- Properly end the bio and finish compressed_bio when error happens

Now in btrfs_submit_compressed_read() even when the bio submission
failed, we can properly handle the error without triggering BUG_ON().
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Although in btrfs we have very limited usage of PageChecked flag, it's
still some page flag not yet subpage compatible.

Fix it by introducing btrfs_subpage::checked_offset to do the convert.

For most call sites, especially for free-space cache, COW fixup and
btrfs_invalidatepage(), they all work in full page mode anyway.

For other call sites, they work as subpage compatible mode.

Some call sites need extra modification:

- btrfs_drop_pages()
  Needs extra parameter to get the real range we need to clear checked
  flag.

  Also since btrfs_drop_pages() will accept pages beyond the dirtied
  range, update btrfs_subpage_clamp_range() to handle such case
  by setting @len to 0 if the page is beyond target range.

- btrfs_invalidatepage()
  We need to call subpage helper before calling __btrfs_releasepage(),
  or it will trigger ASSERT() as page->private will be cleared.

- btrfs_verify_data_csum()
  In theory we don't need the io_bio->csum check anymore, but it's
  won't hurt.  Just change the comment.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

For btrfs_submit_compressed_read() and btrfs_submit_compressed_write(),
we have a pretty weird dance around compressed_bio::pending_bios:

  btrfs_submit_compressed_read/write()
  {
	cb = kmalloc()
	refcount_set(&cb->pending_bios, 0);
	bio = btrfs_alloc_bio();

	/* NOTE here, we haven't yet submitted any bio */
	refcount_set(&cb->pending_bios, 1);

	for (pg_index = 0; pg_index < cb->nr_pages; pg_index++) {
		if (submit) {
			/* Here we submit bio, but we always have one
			 * extra pending_bios */
			refcount_inc(&cb->pending_bios);
			ret = btrfs_map_bio();
		}
	}

	/* Submit the last bio */
	ret = btrfs_map_bio();
  }

There are two reasons why we do this:

- compressed_bio::pending_bios is a refcount
  Thus if it's reduced to 0, it can not be increased again.

- To ensure the compressed_bio is not freed by some submitted bios
  If the submitted bio is finished before the next bio submitted,
  we can free the compressed_bio completely.

But the above code is sometimes confusing, and we can do it better by
introducing a new member, compressed_bio::pending_sectors.

Now we use compressed_bio::pending_sectors to indicate whether we have
any pending sectors under IO or not yet submitted.

If pending_sectors == 0, we're definitely the last bio of compressed_bio,
and is OK to release the compressed bio.

Now the workflow looks like this:

  btrfs_submit_compressed_read/write()
  {
	cb = kmalloc()
	atomic_set(&cb->pending_bios, 0);
	refcount_set(&cb->pending_sectors,
		     compressed_len >> sectorsize_bits);
	bio = btrfs_alloc_bio();

	for (pg_index = 0; pg_index < cb->nr_pages; pg_index++) {
		if (submit) {
			refcount_inc(&cb->pending_bios);
			ret = btrfs_map_bio();
		}
	}

	/* Submit the last bio */
	refcount_inc(&cb->pending_bios);
	ret = btrfs_map_bio();
  }

For now we still need pending_bios for later error handling, but will
remove pending_bios eventually after properly handling the errors.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
If we remove the subpage limitation in add_ra_bio_pages(), then read a
compressed extent which has part of its range in next page, like the
following inode layout:

	0	32K	64K	96K	128K
	|<--------------|-------------->|

Btrfs will trigger ASSERT() in endio function:

  assertion failed: atomic_read(&subpage->readers) >= nbits
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.h:3431!
  Internal error: Oops - BUG: 0 [#1] SMP
  Workqueue: btrfs-endio btrfs_work_helper [btrfs]
  Call trace:
   assertfail.constprop.0+0x28/0x2c [btrfs]
   btrfs_subpage_end_reader+0x148/0x14c [btrfs]
   end_page_read+0x8c/0x100 [btrfs]
   end_bio_extent_readpage+0x320/0x6b0 [btrfs]
   bio_endio+0x15c/0x1dc
   end_workqueue_fn+0x44/0x64 [btrfs]
   btrfs_work_helper+0x74/0x250 [btrfs]
   process_one_work+0x1d4/0x47c
   worker_thread+0x180/0x400
   kthread+0x11c/0x120
   ret_from_fork+0x10/0x30
  ---[ end trace c8b7b552d3bb408c ]---

[CAUSE]
When we read the page range [0, 64K), we find it's a compressed extent,
and we will try to add extra pages in add_ra_bio_pages() to avoid
reading the same compressed extent.

But when we add such page into the read bio, it doesn't follow the
behavior of btrfs_do_readpage() to properly set subpage::readers.

This means, for page [64K, 128K), its subpage::readers is still 0.

And when endio is executed on both pages, since page [64K, 128K) has 0
subpage::readers, it triggers above ASSERT()

[FIX]
Function add_ra_bio_pages() is far from subpage compatible, it always
assume PAGE_SIZE == sectorsize, thus when it skip to next range it
always just skip PAGE_SIZE.

Make it subpage compatible by:

- Skip to next page properly when needed
  If we find there is already a page cache, we need to skip to next page.
  For that case, we shouldn't just skip PAGE_SIZE bytes, but use
  @pg_index to calculate the next bytenr and continue.

- Only add the page range covered by current extent map
  We need to calculate which range is covered by current extent map and
  only add that part into the read bio.

- Update subpage::readers before submitting the bio

- Use proper cursor other than confusing @last_offset

- Calculate the missed threshold based on sector size
  It's no longer using missed pages, as for 64K page size, we have at
  most 3 pages to skip. (If aligned only 2 pages)

- Add ASSERT() to make sure our bytenr is always aligned

- Add comment for the function
  Add a special note for subpage case, as the function won't really
  work well for subpage cases.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since async_extent holds the compressed page, it would trigger the new
ASSERT() in btrfs_mark_ordered_io_finished() which checks that the range
is inside the page.

Now btrfs_writepage_endio_finish_ordered() can accept @page == NULL,
just pass NULL to btrfs_writepage_endio_finish_ordered().
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

For structure async_chunk, we use a very strange member layout to grab
structure async_cow who owns this async_chunk.

At initialization, it goes like this:

		async_chunk[i].pending = &ctx->num_chunks;

Then at async_cow_free() we do a super weird freeing:

	/*
	 * Since the pointer to 'pending' is at the beginning of the array of
	 * async_chunk's, freeing it ensures the whole array has been freed.
	 */
	if (atomic_dec_and_test(async_chunk->pending))
		kvfree(async_chunk->pending);

This is absolutely an abuse of kvfree().

Replace async_chunk::pending with async_chunk::async_cow, so that we can
grab the async_cow structure directly, without this strange dancing.

And with this change, there is no requirement for any specific member
location.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In function __extent_writepage() we always pass page start to
@delalloc_start for writepage_delalloc().

Thus we don't really need @delalloc_start parameter as we can extract it
from @page.

Remove @delalloc_start parameter and make __extent_writepage() to
declare @page_start and @page_end as const.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Variable @nr_pages only gets increased but never used.  Remove it.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging a directory and inserting a batch of directory items, we are
copying the data of each item from a leaf in the fs/subvolume tree to a
leaf in a log tree, separately. This is not really needed, since we are
copying from a contiguous memory area into another one, so we can use a
single copy operation to copy all items at once.

This patch is part of a small patchset that is comprised of the following
patches:

  btrfs: loop only once over data sizes array when inserting an item batch
  btrfs: unexport setup_items_for_insert()
  btrfs: use single bulk copy operations when logging directories

This is patch 3/3.

The following test was used to compare performance of a branch without the
patchset versus one branch that has the whole patchset applied:

  $ cat dir-fsync-test.sh
  #!/bin/bash

  DEV=/dev/nvme0n1
  MNT=/mnt/nvme0n1

  NUM_NEW_FILES=1000000
  NUM_FILE_DELETES=1000
  LEAF_SIZE=16K

  mkfs.btrfs -f -n $LEAF_SIZE $DEV
  mount -o ssd $DEV $MNT

  mkdir $MNT/testdir

  for ((i = 1; i <= $NUM_NEW_FILES; i++)); do
      echo -n > $MNT/testdir/file_$i
  done

  # Fsync the directory, this will log the new dir items and the inodes
  # they point to, because these are new inodes.
  start=$(date +%s%N)
  xfs_io -c "fsync" $MNT/testdir
  end=$(date +%s%N)

  dur=$(( (end - start) / 1000000 ))
  echo "dir fsync took $dur ms after adding $NUM_NEW_FILES files"

  # sync to force transaction commit and wipeout the log.
  sync

  del_inc=$(( $NUM_NEW_FILES / $NUM_FILE_DELETES ))
  for ((i = 1; i <= $NUM_NEW_FILES; i += $del_inc)); do
      rm -f $MNT/testdir/file_$i
  done

  # Fsync the directory, this will only log dir items, there are no
  # dentries pointing to new inodes.
  start=$(date +%s%N)
  xfs_io -c "fsync" $MNT/testdir
  end=$(date +%s%N)

  dur=$(( (end - start) / 1000000 ))
  echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"

  umount $MNT

The tests were run on a non-debug kernel (Debian's default kernel config)
and were the following:

*** with a leaf size of 16K, before patchset ***

dir fsync took 8482 ms after adding 1000000 files
dir fsync took 166 ms after deleting 1000 files

*** with a leaf size of 16K, after patchset ***

dir fsync took 8196 ms after adding 1000000 files  (-3.4%)
dir fsync took 143 ms after deleting 1000 files    (-14.9%)

*** with a leaf size of 64K, before patchset ***

dir fsync took 12851 ms after adding 1000000 files
dir fsync took 466 ms after deleting 1000 files

*** with a leaf size of 64K, after  patchset ***

dir fsync took 12287 ms after adding 1000000 files (-4.5%)
dir fsync took 414 ms after deleting 1000 files    (-11.8%)
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since setup_items_for_insert() is not used anymore outside of ctree.c,
make it static and remove its prototype from ctree.h. This also requires
to move the definition of setup_item_for_insert() from ctree.h to ctree.c
and move down btrfs_duplicate_item() so that it's defined after
setup_items_for_insert().

Further, since setup_item_for_insert() is used outside ctree.c, rename it
to btrfs_setup_item_for_insert().

This patch is part of a small patchset that is comprised of the following
patches:

  btrfs: loop only once over data sizes array when inserting an item batch
  btrfs: unexport setup_items_for_insert()
  btrfs: use single bulk copy operations when logging directories

This is patch 2/3 and performance results, and the specific tests, are
included in the changelog of patch 3/3.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When inserting a batch of items into a btree, we end up looping over the
data sizes array 3 times:

1) Once in the caller of btrfs_insert_empty_items(), when it populates the
   array with the data sizes for each item;

2) Once at btrfs_insert_empty_items() to sum the elements of the data
   sizes array and compute the total data size;

3) And then once again at setup_items_for_insert(), where we do exactly
   the same as what we do at btrfs_insert_empty_items(), to compute the
   total data size.

That is not bad for small arrays, but when the arrays have hundreds of
elements, the time spent on looping is not negligible. For example when
doing batch inserts of delayed items for dir index items or when logging
a directory, it's common to have 200 to 260 dir index items in a single
batch when using a leaf size of 16K and using file names between 8 and 12
characters. For a 64K leaf size, multiply that by 4. Taking into account
that during directory logging or when flushing delayed dir index items we
can have many of those large batches, the time spent on the looping adds
up quickly.

It's also more important to avoid it at setup_items_for_insert(), since
we are holding a write lock on a leaf and, in some cases, on upper nodes
of the btree, which causes us to block other tasks that want to access
the leaf and nodes for longer than necessary.

So change the code so that setup_items_for_insert() and
btrfs_insert_empty_items() no longer compute the total data size, and
instead rely on the caller to supply it. This makes us loop over the
array only once, where we can both populate the data size array and
compute the total data size, taking advantage of spatial and temporal
locality. To make this more manageable, use a structure to contain
all the relevant details for a batch of items (keys array, data sizes
array, total data size, number of items), and use it as an argument
for btrfs_insert_empty_items() and setup_items_for_insert().

This patch is part of a small patchset that is comprised of the following
patches:

  btrfs: loop only once over data sizes array when inserting an item batch
  btrfs: unexport setup_items_for_insert()
  btrfs: use single bulk copy operations when logging directories

This is patch 1/3 and performance results, and the specific tests, are
included in the changelog of patch 3/3.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We can grab fs_info reliably from btrfs_raid_bio::bioc, as the bioc is
always passed into alloc_rbio(), and only get released when the raid bio
is released.

Remove btrfs_raid_bio::fs_info member, and cleanup all the @fs_info
parameters for alloc_rbio() callers.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently btrfs_io_context::fs_info is only initialized in
btrfs_map_bio, but there are call sites like btrfs_map_sblock() which
calls __btrfs_map_block() directly, leaving bioc::fs_info uninitialized
(NULL).

Currently this is fine, but later cleanup will rely on bioc::fs_info to
grab fs_info, and this can be a hidden problem for such usage.

This patch will remove such hidden uninitialized member by always
assigning bioc::fs_info at alloc_btrfs_io_context().
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We currently use lockdep_assert_held() at btrfs_assert_tree_locked(), and
that checks that we hold a lock either in read mode or write mode.

However in all contexts we use btrfs_assert_tree_locked(), we actually
want to check if we are holding a write lock on the extent buffer's rw
semaphore - it would be a bug if in any of those contexts we were holding
a read lock instead.

So change btrfs_assert_tree_locked() to use lockdep_assert_held_write()
instead and, to make it more explicit, rename btrfs_assert_tree_locked()
to btrfs_assert_tree_write_locked(), so that it's clear we want to check
we are holding a write lock.

For now there are no contexts where we want to assert that we must have
a read lock, but in case that is needed in the future, we can add a new
helper function that just calls out lockdep_assert_held_read().
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We got the following lockdep splat while running fstests (specifically
btrfs/003 and btrfs/020 in a row) with the new rc.  This was uncovered
by 87579e9b ("loop: use worker per cgroup instead of kworker") which
converted loop to using workqueues, which comes with lockdep
annotations that don't exist with kworkers.  The lockdep splat is as
follows:

  WARNING: possible circular locking dependency detected
  5.14.0-rc2-custom+ #34 Not tainted
  ------------------------------------------------------
  losetup/156417 is trying to acquire lock:
  ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600

  but task is already holding lock:
  ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #5 (&lo->lo_mutex){+.+.}-{3:3}:
	 __mutex_lock+0xba/0x7c0
	 lo_open+0x28/0x60 [loop]
	 blkdev_get_whole+0x28/0xf0
	 blkdev_get_by_dev.part.0+0x168/0x3c0
	 blkdev_open+0xd2/0xe0
	 do_dentry_open+0x163/0x3a0
	 path_openat+0x74d/0xa40
	 do_filp_open+0x9c/0x140
	 do_sys_openat2+0xb1/0x170
	 __x64_sys_openat+0x54/0x90
	 do_syscall_64+0x3b/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

  -> #4 (&disk->open_mutex){+.+.}-{3:3}:
	 __mutex_lock+0xba/0x7c0
	 blkdev_get_by_dev.part.0+0xd1/0x3c0
	 blkdev_get_by_path+0xc0/0xd0
	 btrfs_scan_one_device+0x52/0x1f0 [btrfs]
	 btrfs_control_ioctl+0xac/0x170 [btrfs]
	 __x64_sys_ioctl+0x83/0xb0
	 do_syscall_64+0x3b/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

  -> #3 (uuid_mutex){+.+.}-{3:3}:
	 __mutex_lock+0xba/0x7c0
	 btrfs_rm_device+0x48/0x6a0 [btrfs]
	 btrfs_ioctl+0x2d1c/0x3110 [btrfs]
	 __x64_sys_ioctl+0x83/0xb0
	 do_syscall_64+0x3b/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

  -> #2 (sb_writers#11){.+.+}-{0:0}:
	 lo_write_bvec+0x112/0x290 [loop]
	 loop_process_work+0x25f/0xcb0 [loop]
	 process_one_work+0x28f/0x5d0
	 worker_thread+0x55/0x3c0
	 kthread+0x140/0x170
	 ret_from_fork+0x22/0x30

  -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
	 process_one_work+0x266/0x5d0
	 worker_thread+0x55/0x3c0
	 kthread+0x140/0x170
	 ret_from_fork+0x22/0x30

  -> #0 ((wq_completion)loop0){+.+.}-{0:0}:
	 __lock_acquire+0x1130/0x1dc0
	 lock_acquire+0xf5/0x320
	 flush_workqueue+0xae/0x600
	 drain_workqueue+0xa0/0x110
	 destroy_workqueue+0x36/0x250
	 __loop_clr_fd+0x9a/0x650 [loop]
	 lo_ioctl+0x29d/0x780 [loop]
	 block_ioctl+0x3f/0x50
	 __x64_sys_ioctl+0x83/0xb0
	 do_syscall_64+0x3b/0x90
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

  other info that might help us debug this:
  Chain exists of:
    (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
   Possible unsafe locking scenario:
	 CPU0                    CPU1
	 ----                    ----
    lock(&lo->lo_mutex);
				 lock(&disk->open_mutex);
				 lock(&lo->lo_mutex);
    lock((wq_completion)loop0);

   *** DEADLOCK ***
  1 lock held by losetup/156417:
   #0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]

  stack backtrace:
  CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  Call Trace:
   dump_stack_lvl+0x57/0x72
   check_noncircular+0x10a/0x120
   __lock_acquire+0x1130/0x1dc0
   lock_acquire+0xf5/0x320
   ? flush_workqueue+0x84/0x600
   flush_workqueue+0xae/0x600
   ? flush_workqueue+0x84/0x600
   drain_workqueue+0xa0/0x110
   destroy_workqueue+0x36/0x250
   __loop_clr_fd+0x9a/0x650 [loop]
   lo_ioctl+0x29d/0x780 [loop]
   ? __lock_acquire+0x3a0/0x1dc0
   ? update_dl_rq_load_avg+0x152/0x360
   ? lock_is_held_type+0xa5/0x120
   ? find_held_lock.constprop.0+0x2b/0x80
   block_ioctl+0x3f/0x50
   __x64_sys_ioctl+0x83/0xb0
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x7f645884de6b

Usually the uuid_mutex exists to protect the fs_devices that map
together all of the devices that match a specific uuid.  In rm_device
we're messing with the uuid of a device, so it makes sense to protect
that here.

However in doing that it pulls in a whole host of lockdep dependencies,
as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus
we end up with the dependency chain under the uuid_mutex being added
under the normal sb write dependency chain, which causes problems with
loop devices.

We don't need the uuid mutex here however.  If we call
btrfs_scan_one_device() before we scratch the super block we will find
the fs_devices and not find the device itself and return EBUSY because
the fs_devices is open.  If we call it after the scratch happens it will
not appear to be a valid btrfs file system.

We do not need to worry about other fs_devices modifying operations here
because we're protected by the exclusive operations locking.

So drop the uuid_mutex here in order to fix the lockdep splat.

A more detailed explanation from the discussion:

We are worried about rm and scan racing with each other, before this
change we'll zero the device out under the UUID mutex so when scan does
run it'll make sure that it can go through the whole device scan thing
without rm messing with us.

We aren't worried if the scratch happens first, because the result is we
don't think this is a btrfs device and we bail out.

The only case we are concerned with is we scratch _after_ scan is able
to read the superblock and gets a seemingly valid super block, so lets
consider this case.

Scan will call device_list_add() with the device we're removing.  We'll
call find_fsid_with_metadata_uuid() and get our fs_devices for this
UUID.  At this point we lock the fs_devices->device_list_mutex.  This is
what protects us in this case, but we have two cases here.

1. We aren't to the device removal part of the RM.  We found our device,
   and device name matches our path, we go down and we set total_devices
   to our super number of devices, which doesn't affect anything because
   we haven't done the remove yet.

2. We are past the device removal part, which is protected by the
   device_list_mutex.  Scan doesn't find the device, it goes down and
   does the

   if (fs_devices->opened)
	   return -EBUSY;

   check and we bail out.

Nothing about this situation is ideal, but the lockdep splat is real,
and the fix is safe, tho admittedly a bit scary looking.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ copy more from the discussion ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.

With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.

The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.

This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.

We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The helper btrfs_bio_alloc() is almost the same as btrfs_io_bio_alloc(),
except it's allocating using BIO_MAX_VECS as @nr_iovecs, and initializes
bio->bi_iter.bi_sector.

However the naming itself is not using "btrfs_io_bio" to indicate its
parameter is "strcut btrfs_io_bio" and can be easily confused with
"struct btrfs_bio".

Considering assigned bio->bi_iter.bi_sector is such a simple work and
there are already tons of call sites doing that manually, there is no
need to do that in a helper.

Remove btrfs_bio_alloc() helper, and enhance btrfs_io_bio_alloc()
function to provide a fail-safe value for its @nr_iovecs.

And then replace all btrfs_bio_alloc() callers with
btrfs_io_bio_alloc().
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The structure btrfs_bio is used by two different sites:

- bio->bi_private for mirror based profiles
  For those profiles (SINGLE/DUP/RAID1*/RAID10), this structures records
  how many mirrors are still pending, and save the original endio
  function of the bio.

- RAID56 code
  In that case, RAID56 only utilize the stripes info, and no long uses
  that to trace the pending mirrors.

So btrfs_bio is not always bind to a bio, and contains more info for IO
context, thus renaming it will make the naming less confusing.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

After the first time we log a directory in the current transaction, for
each directory item in a changed leaf of the subvolume tree, we have to
check if we previously logged the item, in order to overwrite it in case
its data changed or skip it in case its data hasn't changed.

Checking if we have logged each item before not only wastes times, but it
also adds lock contention on the log tree. So in order to minimize the
number of times we do such checks, keep track of the offset of the last
key we logged for a directory and, on the next time we log the directory,
skip the checks for any new keys that have an offset greater than the
offset we have previously saved. This is specially effective for index
keys, because the offset for these keys comes from a monotonically
increasing counter.

This patch is part of a patchset comprised of the following 5 patches:

  btrfs: remove root argument from btrfs_log_inode() and its callees
  btrfs: remove redundant log root assignment from log_dir_items()
  btrfs: factor out the copying loop of dir items from log_dir_items()
  btrfs: insert items in batches when logging a directory when possible
  btrfs: keep track of the last logged keys when logging a directory

This is patch 5/5.

The following test was used on a non-debug kernel to measure the impact
it has on a directory fsync:

  $ cat test-dir-fsync.sh
  #!/bin/bash

  DEV=/dev/nvme0n1
  MNT=/mnt/nvme0n1

  NUM_NEW_FILES=100000
  NUM_FILE_DELETES=1000

  mkfs.btrfs -f $DEV
  mount -o ssd $DEV $MNT

  mkdir $MNT/testdir

  for ((i = 1; i <= $NUM_NEW_FILES; i++)); do
      echo -n > $MNT/testdir/file_$i
  done

  # fsync the directory, this will log the new dir items and the inodes
  # they point to, because these are new inodes.
  start=$(date +%s%N)
  xfs_io -c "fsync" $MNT/testdir
  end=$(date +%s%N)

  dur=$(( (end - start) / 1000000 ))
  echo "dir fsync took $dur ms after adding $NUM_NEW_FILES files"

  # sync to force transaction commit and wipeout the log.
  sync

  del_inc=$(( $NUM_NEW_FILES / $NUM_FILE_DELETES ))
  for ((i = 1; i <= $NUM_NEW_FILES; i += $del_inc)); do
      rm -f $MNT/testdir/file_$i
  done

  # fsync the directory, this will only log dir items, there are no
  # dentries pointing to new inodes.
  start=$(date +%s%N)
  xfs_io -c "fsync" $MNT/testdir
  end=$(date +%s%N)

  dur=$(( (end - start) / 1000000 ))
  echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"

  umount $MNT

Test results with NUM_NEW_FILES set to 100 000 and 1 000 000:

**** before patchset, 100 000 files, 1000 deletes ****

dir fsync took 848 ms after adding 100000 files
dir fsync took 175 ms after deleting 1000 files

**** after patchset, 100 000 files, 1000 deletes ****

dir fsync took 758 ms after adding 100000 files  (-11.2%)
dir fsync took 63 ms after deleting 1000 files   (-94.1%)

**** before patchset, 1 000 000 files, 1000 deletes ****

dir fsync took 9945 ms after adding 1000000 files
dir fsync took 473 ms after deleting 1000 files

**** after patchset, 1 000 000 files, 1000 deletes ****

dir fsync took 8677 ms after adding 1000000 files (-13.6%)
dir fsync took 146 ms after deleting 1000 files   (-105.6%)
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging a directory, we scan its directory items from the subvolume
tree and then copy one by one into the log tree. This is not efficient
since we generally are able to insert several items in a batch, using a
single btree operation for adding several items at once. The reason we
copy items one by one is that we must check if each item was previously
logged in the current transaction, and if it was we either overwrite it
or skip it in case its content did not change in the subvolume tree (this
can happen only for dir item keys, but not for dir index keys), and doing
such check makes it a bit cumbersome to attempt batch insertions.

However the chances for doing batch insertions are very frequent and
always happen when:

1) Logging the directory for the first time in the current transaction,
   as none of the items exist in the log tree yet;

2) Logging new dir index keys, because the offset for new dir index keys
   comes from a monotonically increasing counter. This means if we keep
   adding dentries to a directory, through creation of new files and
   sub-directories or by adding new links or renaming from some other
   directory into the one we are logging, all the new dir index keys
   have a new offset that is greater than the offset of any previously
   logged index keys, so we can insert them in batches into the log tree.

For dir item keys, since their offset depends on the result of an hash
function against the dentry's name, unless the directory is being logged
for the first time in the current transaction, the chances being able to
insert the items in the log using batches is pretty much random and not
predictable, as it depends on the names of the dentries, but still happens
often enough.

So change directory logging to keep track of consecutive directory items
that don't exist yet in the log and batch insert them.

This patch is part of a patchset comprised of the following 5 patches:

  btrfs: remove root argument from btrfs_log_inode() and its callees
  btrfs: remove redundant log root assignment from log_dir_items()
  btrfs: factor out the copying loop of dir items from log_dir_items()
  btrfs: insert items in batches when logging a directory when possible
  btrfs: keep track of the last logged keys when logging a directory

This is patch 4/5. The change log of the last patch (5/5) has performance
results.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In preparation for the next change, move the loop that processes a leaf
and copies its directory items to the log, into a separate helper
function. This makes the next change simpler and it also helps making
log_dir_items() a bit shorter (specially after the next change).

This patch is part of a patchset comprised of the following 5 patches:

  btrfs: remove root argument from btrfs_log_inode() and its callees
  btrfs: remove redundant log root assignment from log_dir_items()
  btrfs: factor out the copying loop of dir items from log_dir_items()
  btrfs: insert items in batches when logging a directory when possible
  btrfs: keep track of the last logged keys when logging a directory

This is patch 3/5. The change log of the last patch (5/5) has performance
results.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

At log_dir_items() we are assigning the exact same value to the local
variable 'log', once when it's declared and once again shortly after.
Remove the later assignment as it's pointless.

This patch is part of a patchset comprised of the following 5 patches:

  btrfs: remove root argument from btrfs_log_inode() and its callees
  btrfs: remove redundant log root assignment from log_dir_items()
  btrfs: factor out the copying loop of dir items from log_dir_items()
  btrfs: insert items in batches when logging a directory when possible
  btrfs: keep track of the last logged keys when logging a directory

This is patch 2/5. The change log of the last patch (5/5) has performance
results.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The root argument passed to btrfs_log_inode() is unncessary, as it is
always the root of the inode we are going to log. This root also gets
unnecessarily propagated to several functions called by btrfs_log_inode(),
and all of them take the inode as an argument as well. So just remove
the root argument from these functions and have them get the root from
the inode where needed.

This patch is part of a patchset comprised of the following 5 patches:

  btrfs: remove root argument from btrfs_log_inode() and its callees
  btrfs: remove redundant log root assignment from log_dir_items()
  btrfs: factor out the copying loop of dir items from log_dir_items()
  btrfs: insert items in batches when logging a directory when possible
  btrfs: keep track of the last logged keys when logging a directory

This is patch 1/5. The change log of the last patch (5/5) has performance
results.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The statement which decides if an extent allocation on a zoned device is
for the dedicated tree-log block group or not and if we can use the block
group we picked for this allocation is not easy to read but an important
part of the allocator.

Rewrite into an if condition instead of a plain boolean test to make it
stand out more, like the version which tests for the dedicated
data-relocation block group.
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In btrfs code we have two functions called setup_extent_mapping, one in
the extent_map code and one in the relocation code. While both are
private to their respective implementation, this can still be confusing
for the reader.

So rename the version in relocation.c to setup_relocation_extent_mapping.
No functional changes.
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that we use a dedicated block group and regular writes for data
relocation, we can preallocate the space needed for a relocated inode,
just like we do in regular mode.

Essentially this reverts commit 32430c61 ("btrfs: zoned: enable
relocation on a zoned filesystem") as it is not needed anymore.
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Prepare for allowing preallocation for relocation inodes.
Reviewed-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that we have a dedicated block group for relocation, we can use
REQ_OP_WRITE instead of  REQ_OP_ZONE_APPEND for writing out the data on
relocation.
Reviewed-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Don't allow more than one process to add pages to a relocation inode on
a zoned filesystem, otherwise we cannot guarantee the sequential write
rule once we're filling preallocated extents on a zoned filesystem.
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Relocation in a zoned filesystem can fail with a transaction abort with
error -22 (EINVAL). This happens because the relocation code assumes that
the extents we relocated the data to have the same size the source extents
had and ensures this by preallocating the extents.

But in a zoned filesystem we currently can't preallocate the extents as
this would break the sequential write required rule. Therefore it can
happen that the writeback process kicks in while we're still adding pages
to a delalloc range and starts writing out dirty pages.

This then creates destination extents that are smaller than the source
extents, triggering the following safety check in get_new_location():

 1034         if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
 1035                 ret = -EINVAL;
 1036                 goto out;
 1037         }

Temporarily create a dedicated block group for the relocation process, so
no non-relocation data writes can interfere with the relocation writes.

This is needed that we can switch the relocation process on a zoned
filesystem from the REQ_OP_ZONE_APPEND writing we use for data to a scheme
like in a non-zoned filesystem using REQ_OP_WRITE and preallocation.

Fixes: 32430c61 ("btrfs: zoned: enable relocation on a zoned filesystem")
Reviewed-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are several places in our codebase where we check if a root is the
root of the data reloc tree and subsequent patches will introduce more.

Factor out the check into a small helper function instead of open coding
it multiple times.
Reviewed-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Function repair_io_failure() is no longer used out of extent_io.c since
commit 8b9b6f25 ("btrfs: scrub: cleanup the remaining nodatasum
fixup code"), which removes the last external caller.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging a regular file in full sync mode, we are currently committing
its delayed inode item. This is to ensure that we never miss copying the
inode item, with its most up to date data, into the log tree.

However that is not necessary since commit e4545de5 ("Btrfs: fix fsync
data loss after append write"), because even if we don't find the leaf
with the inode item when looking for leaves that changed in the current
transaction, we end up logging the inode item later using the in-memory
content. In case we find the leaf containing the inode item, we already
end up using the in-memory inode for filling the inode item in the log
tree, and not the inode item that is in the fs/subvolume tree, as it
might be not up to date (copy_items() -> fill_inode_item()).

So don't commit the delayed inode item, which brings a couple of benefits:

1) Avoid writing the inode item to the fs/subvolume btree, saving time and
   reducing lock contention on the btree;

2) In case no other item for the inode was changed, added or deleted in
   the same leaf where the inode item is located, we ended up copying
   all the items in that leaf to the log tree - it's harmless from a
   functional point of view, but it wastes time and log tree space.

This patch is part of a patch set comprised of the following patches:

  btrfs: check if a log tree exists at inode_logged()
  btrfs: remove no longer needed checks for NULL log context
  btrfs: do not log new dentries when logging that a new name exists
  btrfs: always update the logged transaction when logging new names
  btrfs: avoid expensive search when dropping inode items from log
  btrfs: add helper to truncate inode items when logging inode
  btrfs: avoid expensive search when truncating inode items from the log
  btrfs: avoid search for logged i_size when logging inode if possible
  btrfs: avoid attempt to drop extents when logging inode for the first time
  btrfs: do not commit delayed inode when logging a file in full sync mode

This is patch 10/10 and the following test results compare a branch with
the whole patch set applied versus a branch without any of the patches
applied.

The following script was used to test dbench with 8 and 16 jobs on a
machine with 12 cores, 64G of RAM, a NVME device and using a non-debug
kernel config (Debian's default):

  $ cat test.sh
  #!/bin/bash

  if [ $# -ne 1 ]; then
      echo "Use $0 NUM_JOBS"
      exit 1
  fi

  NUM_JOBS=$1

  DEV=/dev/nvme0n1
  MNT=/mnt/nvme0n1
  MOUNT_OPTIONS="-o ssd"
  MKFS_OPTIONS="-m single -d single"

  echo "performance" | \
      tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor

  mkfs.btrfs -f $MKFS_OPTIONS $DEV
  mount $MOUNT_OPTIONS $DEV $MNT

  dbench -D $MNT -t 120 $NUM_JOBS

  umount $MNT

The results were the following:

8 jobs, before patchset:

 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 NTCreateX    4113896     0.009   238.665
 Close        3021699     0.001     0.590
 Rename        174215     0.082   238.733
 Unlink        830977     0.049   238.642
 Deltree           96     2.232     8.022
 Mkdir             48     0.003     0.005
 Qpathinfo    3729013     0.005     2.672
 Qfileinfo     653206     0.001     0.152
 Qfsinfo       683866     0.002     0.526
 Sfileinfo     335055     0.004     1.571
 Find         1441800     0.016     4.288
 WriteX       2049644     0.010     3.982
 ReadX        6449786     0.003     0.969
 LockX          13400     0.002     0.043
 UnlockX        13400     0.001     0.075
 Flush         288349     2.521   245.516

Throughput 1075.73 MB/sec  8 clients  8 procs  max_latency=245.520 ms

8 jobs, after patchset:

 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 NTCreateX    4154282     0.009   156.675
 Close        3051450     0.001     0.843
 Rename        175912     0.072     4.444
 Unlink        839067     0.048    66.050
 Deltree           96     2.131     5.979
 Mkdir             48     0.002     0.004
 Qpathinfo    3765575     0.005     3.079
 Qfileinfo     659582     0.001     0.099
 Qfsinfo       690474     0.002     0.155
 Sfileinfo     338366     0.004     1.419
 Find         1455816     0.016     3.423
 WriteX       2069538     0.010     4.328
 ReadX        6512429     0.003     0.840
 LockX          13530     0.002     0.078
 UnlockX        13530     0.001     0.051
 Flush         291158     2.500   163.468

Throughput 1105.45 MB/sec  8 clients  8 procs  max_latency=163.474 ms

+2.7% throughput, -40.1% max latency

16 jobs, before patchset:

 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 NTCreateX    5457602     0.033   337.098
 Close        4008979     0.002     2.018
 Rename        231051     0.323   254.054
 Unlink       1102209     0.202   337.243
 Deltree          160     6.521    31.720
 Mkdir             80     0.003     0.007
 Qpathinfo    4946147     0.014     6.988
 Qfileinfo     867440     0.001     1.642
 Qfsinfo       907081     0.003     1.821
 Sfileinfo     444433     0.005     2.053
 Find         1912506     0.067     7.854
 WriteX       2724852     0.018     7.428
 ReadX        8553883     0.003     2.059
 LockX          17770     0.003     0.350
 UnlockX        17770     0.002     0.627
 Flush         382533     2.810   353.691

Throughput 1413.09 MB/sec  16 clients  16 procs  max_latency=353.696 ms

16 jobs, after patchset:

 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 NTCreateX    5393156     0.034   303.181
 Close        3961986     0.002     1.502
 Rename        228359     0.320   253.379
 Unlink       1088920     0.206   303.409
 Deltree          160     6.419    30.088
 Mkdir             80     0.003     0.004
 Qpathinfo    4887967     0.015     7.722
 Qfileinfo     857408     0.001     1.651
 Qfsinfo       896343     0.002     2.147
 Sfileinfo     439317     0.005     4.298
 Find         1890018     0.073     8.347
 WriteX       2693356     0.018     6.373
 ReadX        8453485     0.003     3.836
 LockX          17562     0.003     0.486
 UnlockX        17562     0.002     0.635
 Flush         378023     2.802   315.904

Throughput 1454.46 MB/sec  16 clients  16 procs  max_latency=315.910 ms

+2.9% throughput, -11.3% max latency
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging an extent, in the fast fsync path, we always attempt do drop
or trim any existing extents with a range that match or overlap the range
of the extent we are about to log. We do that through a call to
btrfs_drop_extents().

However this is not needed when we are logging the inode for the first
time in the current transaction, since we have no inode items of the
inode in the log tree. Calling btrfs_drop_extents() does a deletion search
on the log tree, which is expensive when we have concurrent tasks
accessing the log tree because a deletion search always acquires a write
lock on the extent buffers at levels 2, 1 and 0, adding significant lock
contention, specially taking into account the height of a log tree rarely
(if ever) goes beyond 2 or 3, due to its short life.

So skip the call to btrfs_drop_extents() when the inode was not previously
logged in the current transaction.

This patch is part of a patch set comprised of the following patches:

  btrfs: check if a log tree exists at inode_logged()
  btrfs: remove no longer needed checks for NULL log context
  btrfs: do not log new dentries when logging that a new name exists
  btrfs: always update the logged transaction when logging new names
  btrfs: avoid expensive search when dropping inode items from log
  btrfs: add helper to truncate inode items when logging inode
  btrfs: avoid expensive search when truncating inode items from the log
  btrfs: avoid search for logged i_size when logging inode if possible
  btrfs: avoid attempt to drop extents when logging inode for the first time
  btrfs: do not commit delayed inode when logging a file in full sync mode

This is patch 9/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If we are logging that an inode exists and the inode was not logged
before, we can avoid searching in the log tree for the inode item since we
know it does not exists. That wastes time and adds more lock contention on
the extent buffers of the log tree when there are other tasks that are
logging other inodes.

This patch is part of a patch set comprised of the following patches:

  btrfs: check if a log tree exists at inode_logged()
  btrfs: remove no longer needed checks for NULL log context
  btrfs: do not log new dentries when logging that a new name exists
  btrfs: always update the logged transaction when logging new names
  btrfs: avoid expensive search when dropping inode items from log
  btrfs: add helper to truncate inode items when logging inode
  btrfs: avoid expensive search when truncating inode items from the log
  btrfs: avoid search for logged i_size when logging inode if possible
  btrfs: avoid attempt to drop extents when logging inode for the first time
  btrfs: do not commit delayed inode when logging a file in full sync mode

This is patch 8/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Whenever we are logging a file inode in full sync mode we call
btrfs_truncate_inode_items() to delete items of the inode we may have
previously logged.

That results in doing a btree search for deletion, which is expensive
because it always acquires write locks for extent buffers at levels 2, 1
and 0, and it balances any node that is less than half full. Acquiring
the write locks can block the task if the extent buffers are already
locked by another task or block other tasks attempting to lock them,
which is specially bad in case of log trees since they are small due to
their short life, with a root node at a level typically not greater than
level 2.

If we know that we are logging the inode for the first time in the current
transaction, we can skip the call to btrfs_truncate_inode_items(), avoiding
the deletion search. This change does that.

This patch is part of a patch set comprised of the following patches:

  btrfs: check if a log tree exists at inode_logged()
  btrfs: remove no longer needed checks for NULL log context
  btrfs: do not log new dentries when logging that a new name exists
  btrfs: always update the logged transaction when logging new names
  btrfs: avoid expensive search when dropping inode items from log
  btrfs: add helper to truncate inode items when logging inode
  btrfs: avoid expensive search when truncating inode items from the log
  btrfs: avoid search for logged i_size when logging inode if possible
  btrfs: avoid attempt to drop extents when logging inode for the first time
  btrfs: do not commit delayed inode when logging a file in full sync mode

This is patch 7/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Move the call to btrfs_truncate_inode_items(), and the surrounding retry
loop, into a local helper function. This avoids some repetition and avoids
making the next change a bit awkward due to a bit of too much indentation.

This patch is part of a patch set comprised of the following patches:

  btrfs: check if a log tree exists at inode_logged()
  btrfs: remove no longer needed checks for NULL log context
  btrfs: do not log new dentries when logging that a new name exists
  btrfs: always update the logged transaction when logging new names
  btrfs: avoid expensive search when dropping inode items from log
  btrfs: add helper to truncate inode items when logging inode
  btrfs: avoid expensive search when truncating inode items from the log
  btrfs: avoid search for logged i_size when logging inode if possible
  btrfs: avoid attempt to drop extents when logging inode for the first time
  btrfs: do not commit delayed inode when logging a file in full sync mode

This is patch 6/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Whenever we are logging a directory inode, logging that an inode exists or
logging an inode that has changes in its references or xattrs, we attempt
to delete items of this inode we may have previously logged (through calls
to drop_objectid_items()).

That attempt does a btree search for deletion, which is expensive because
it always acquires write locks for extent buffers at levels 2, 1 and 0,
and it balances any node that is less than half full. Acquiring the write
locks can block the task if the extent buffers are already locked or block
other tasks attempting to lock them, which is specially bad in case of log
trees since they are small due to their short life, with a root node at a
level typically not greater than level 2.

If we know that we are logging the inode for the first time in the current
transaction, we can skip the search. This change does that.

This patch is part of a patch set comprised of the following patches:

  btrfs: check if a log tree exists at inode_logged()
  btrfs: remove no longer needed checks for NULL log context
  btrfs: do not log new dentries when logging that a new name exists
  btrfs: always update the logged transaction when logging new names
  btrfs: avoid expensive search when dropping inode items from log
  btrfs: add helper to truncate inode items when logging inode
  btrfs: avoid expensive search when truncating inode items from the log
  btrfs: avoid search for logged i_size when logging inode if possible
  btrfs: avoid attempt to drop extents when logging inode for the first time
  btrfs: do not commit delayed inode when logging a file in full sync mode

This is patch 5/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When we are logging a new name for an inode, due to a link or rename
operation, if the inode has ancestor inodes that are new, created in the
current transaction, we need to log that these inodes exist. To ensure
that a subsequent explicit fsync on one of these ancestor inodes does
sync the log, we don't set the logged_trans field of these inodes.
This was done in commit 75b463d2 ("btrfs: do not commit logs and
transactions during link and rename operations"), to avoid syncing a
log after a rename or link operation.

In order to allow for future changes to do some optimizations, change
this behaviour to always update the logged_trans of any logged inode
and don't update the last_log_commit of the inode if we are logging
that it exists. This accomplishes that same objective with simpler
logic, allowing for some optimizations in the next patches.

So just do that simplification.

This patch is part of a patch set comprised of the following patches:

  btrfs: check if a log tree exists at inode_logged()
  btrfs: remove no longer needed checks for NULL log context
  btrfs: do not log new dentries when logging that a new name exists
  btrfs: always update the logged transaction when logging new names
  btrfs: avoid expensive search when dropping inode items from log
  btrfs: add helper to truncate inode items when logging inode
  btrfs: avoid expensive search when truncating inode items from the log
  btrfs: avoid search for logged i_size when logging inode if possible
  btrfs: avoid attempt to drop extents when logging inode for the first time
  btrfs: do not commit delayed inode when logging a file in full sync mode

This is patch 4/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging a new name for an inode, due to a link or rename operation,
we don't need to log all new dentries of the parent directories and their
subdirectories. We only want to log the names of the inode and that any
new parent directories exist. So in this case don't trigger logging of
the new dentries, that is only need when doing an explicit fsync on a
directory or on a file which requires logging its parent directories.

This avoids unnecessary work and reduces contention on the extent buffers
of a log tree.

This patch is part of a patch set comprised of the following patches:

  btrfs: check if a log tree exists at inode_logged()
  btrfs: remove no longer needed checks for NULL log context
  btrfs: do not log new dentries when logging that a new name exists
  btrfs: always update the logged transaction when logging new names
  btrfs: avoid expensive search when dropping inode items from log
  btrfs: add helper to truncate inode items when logging inode
  btrfs: avoid expensive search when truncating inode items from the log
  btrfs: avoid search for logged i_size when logging inode if possible
  btrfs: avoid attempt to drop extents when logging inode for the first time
  btrfs: do not commit delayed inode when logging a file in full sync mode

This is patch 3/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>