With this cleanup, the APIs from amdgpu_smu.c will map to
ASIC specific ones directly. Those can be shared around
all SMU V11/V12 ASICs will be put in smu_v11_0.c and
smu_v12_0.c respectively.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Those swSMU APIs used internally are moved to smu_internal.h while
others are kept in amdgpu_smu.h.

V2: give a better name smu_internal.h for the place to hold
    those internal APIs
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a quick and low risk fix. Those APIs which
are exposed to other IPs or to support sysfs/hwmon
interfaces or DAL will have lock protection. Meanwhile
no lock protection is enforced for swSMU internal used
APIs. Future optimization is needed.

V2: strip the lock protection for all swSMU internal APIs
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NFeifei Xu <Feifei.Xu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In some cases, display fixes memory clock frequency to a high value
rather than the natural memory clock switching.
When we comes back from s3 resume, the request from display is not reset,
this causes the bug which makes the memory clock goes into a low value.
Then due to the insuffcient memory clock, the screen flicks.
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NJack Xiao <Jack.Xiao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix gfx cgpg setting sequence for RLC deadlock at safe mode entry in polling gfx response.
The patch can fix VCN IB test failed and DAL get dispaly count failed issue.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

there are two paths for renoir dc access smu.
one dc access smu directly using bios smc
interface: set disply, dprefclk, etc.
another goes through pplib for get dpm clock
table and set watermmark.
Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Bug fix for pcie paramerers override on swsmu.
Below is a scenario to have this problem.
pptable definition on pcie dpm:
0 -> pcie gen speed:1, pcie lanes: *16
1 -> pcie gen speed:4, pcie lanes: *16
Then if we have a system only have the capbility:
pcie gen speed: 3, pcie lanes: *8,
we will override dpm 1 to pcie gen speed 3, pcie lanes *8.
But the code skips the dpm 0 configuration.
So the real pcie dpm parameters are:
0 -> pcie gen speed:1, pcie lanes: *16
1 -> pcie gen speed:3, pcie lanes: *8
Then the wrong pcie lanes will be toggled.
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently this is only supported on Vega20 with 40.50 and later
SMC firmware.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The error handling is off by one.  We should not free the first
"tables[i].bo" without decrementing "i" because that might result in a
double free.  The second problem is that when an error occurs, then the
zeroth element "tables[0].bo" isn't freed.

I had make "i" signed int for the error handling to work, so I just
updated "ret" as well as a clean up.

Fixes: f96357a9 ("drm/amd/powerplay: implement smu_init(fini)_fb_allocations function")
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This function needs to drop the mutex before returning.

Fixes: f7e3a577 ("drm/amd/powerplay: check SMU engine readiness before proceeding on S3 resume")
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the member of is_apu in smu_context need to initlialize by default.

set default value is false (dGPU)

for patch:
	drm/amd/powerplay: bypass dpm_context null pointer check guard
	for some smu series
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NPrike Liang <Prike.Liang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The APU soft freq range set by different way from DGPU, thus need implement
the function respectively base on each common SMU part.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For now APU has no smu_dpm_context structure for containing default/current related dpm tables,
thus will needn't initialize smu_dpm_context to aviod APU null pointer issue.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when multithreading access sysfs of amdgpu_pm_info at the sametime.
the swsmu driver cause smu firmware hang.

eg:
single thread access:
Message A + Param A ==> right
Message B + Param B ==> right
Message C + Param C ==> right
multithreading access:
Message A + Param B ==> error
Message B + Param A ==> error
Message C + Param C ==> right

the patch will add sensor lock(mutex) to avoid this error.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Changes to function "smu_suspend" in amdgpu_smu.c is a workaround.

We should get real information about if baco is enabled or not, while we
always consider APU SMU feature as enabled in current code.

I know APU do not support baco mode for GPU reset, so I use
"adev->flags" to skip function "smu_feature_is_enabled".
Signed-off-by: Nchen gong <curry.gong@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The sdma_v4 should be ungated when the IP resume back,
otherwise it will hang up and resume time out error.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is especially needed for non-psp loading way.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set mp1 state properly for SW SMU suspend/reset routine.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to perform DC-BTC for arcturus on bootup.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix bellow patch issue:
drm/amd/powerplay: introduce smu table id type to handle the smu table
for each asic
----
"This patch introduces new smu table type, it's to handle the
 different smu table
 defines for each asic with the same smu ip."

before:
use smu->table_count to represent the actual table count in smc firmware
use actual table count to check smu function parameter about smu table
after:
use logic table count "SMU_TABLE_COUNT" to check function parameter
because table id already mapped in smu driver,
and smu function will use logic table id not actual table id to check func parameter.

v2: squash in warning fix
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are needed for smu_reset support.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NJack Gui <Jack.Gui@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to update in cache feature enablement status after pp_feature
settings. Another fix for the commit below:
drm/amd/powerplay: implment sysfs feature status function in smu

V2: update smu_feature_update_enable_state() and relates
V3: use bitmap_or and bitmap_andnot
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NJack Gui <Jack.Gui@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Force clock level is for dpm manual mode only.
Reported-by: NCandice Li <candice.li@amd.com>
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJack Gui <Jack.Gui@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

no functional change, just switch to new structures
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For apu, SMU_MSG_OverridePcieParameters is unsupport.
So return directly in smu_override_pcie_parameters function.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add the get_dpm_ultimate_freq for supporting different swSMU.
-v2:
        Handle the unsupported clock type and read smc message failed case and return error code.
        Move the smu12 uclk frequency retrieved logic to renoir ppt.
-v3:
        Use goto clause to handle invalidate clk index.
        Add the limited tag for smu_get_dpm_uclk to avoid other likewise interface introduced.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Should populate DPM clocks tables during hw init,otherwise will
suffer from invalidate table.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is no driver message to enable/disable feature mask for APU.
For the sake of APU reusing swSMU interface and assume APU supports all
the feature.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To avoid the dpm frequence range get failed when DPM enabled and it
will be enabled later once handle well the feature bit map struct.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

enable the dpm feature for the renoir.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds add DPMCLOCKS table implementation
Rename smu_populate_smc_pptable to smu_populate_smc_tables
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch updates gfxoff feature.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

All apu series need powerup sdma and vcn via smu messages.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Thus VCN can be powered up for normal operations
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Renoir DPM is not functional so far, we skip it for the comment.
Will revert this patch once SMU 12 is functional.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1.Implement PowerUpSDMA/PowerDownSDMA interfaces in the swSMU for renoir
2.adjust smu ip block ahead of gfx&sdma ip block
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add swSMU [smu_v12_0] for renoir

v2: whitespace fixes (Alex)
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

change the smu_read_sensor sequence to:

asic specific sensor read -> smu v11 specific sensor read -> smu v11 common sensor read
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is not supported on Arcturus.

Affected ASIC: Arcturus

V2: minor cosmetic fix
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same as other Navi asics.
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>