The parameters what SMU_MSG_PowerUpVcn need is 0, not 1
Signed-off-by: Nchen gong <curry.gong@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For dpm disabled case, it's assumed the only one support clock
level is always current clock level.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For Arcturus, clock limit settings on uclk/socclk/fclk domains
are not supported.

V2: simplify the code to support both SGPU and MGPU cases
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The communication is done through SMU table and hence the code
is in powerplay.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used by Arcturus support for RAS page retirement.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With this cleanup, the APIs from amdgpu_smu.c will map to
ASIC specific ones directly. Those can be shared around
all SMU V11/V12 ASICs will be put in smu_v11_0.c and
smu_v12_0.c respectively.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Those swSMU APIs used internally are moved to smu_internal.h while
others are kept in amdgpu_smu.h.

V2: give a better name smu_internal.h for the place to hold
    those internal APIs
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a quick and low risk fix. Those APIs which
are exposed to other IPs or to support sysfs/hwmon
interfaces or DAL will have lock protection. Meanwhile
no lock protection is enforced for swSMU internal used
APIs. Future optimization is needed.

V2: strip the lock protection for all swSMU internal APIs
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NFeifei Xu <Feifei.Xu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To fit the latest SMU firmware.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To avoid walking past the end of the arrays since the PP_SMU
defines don't match the renoir defines.
Reviewed-by: NPrike Liang <Prike.Liang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Smatch complains that we need to initialized "*cap" otherwise it can
lead to an uninitialized variable bug in the caller.  This seems like a
reasonable warning and it doesn't hurt to silence it at least.

drivers/gpu/drm/amd/amdgpu/vi.c:767 vi_asic_reset_method() error: uninitialized symbol 'baco_reset'.

Fixes: 425db255 ("drm/amdgpu: expose BACO interfaces to upper level from PP")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

implement get_power_profile_mode for getting power profile mode status.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

smu_send_smc_msg(smu, SMU_MSG_AllowGfxOff) Just turn on a switch.

As to when GPU get into "GFXoff" will be up to drawing load.

So we can not sure which state GPU should be in after enable gfxoff
feature.
Signed-off-by: Nchen gong <curry.gong@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In some cases, display fixes memory clock frequency to a high value
rather than the natural memory clock switching.
When we comes back from s3 resume, the request from display is not reset,
this causes the bug which makes the memory clock goes into a low value.
Then due to the insuffcient memory clock, the screen flicks.
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NJack Xiao <Jack.Xiao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix gfx cgpg setting sequence for RLC deadlock at safe mode entry in polling gfx response.
The patch can fix VCN IB test failed and DAL get dispaly count failed issue.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Wire up the powerplay callbacks for for BACO for smu7 devices.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Several of the BACO functions are common across smu7-based
asics.  Split the common code out.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds BACO support for CI asics.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds BACO support for Fiji asics.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds BACO support for VegaM asics.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds BACO support for Polaris asics.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds BACO support for Iceland asics.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds BACO support for Tonga.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds core support for BACO on pre-vega asics.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It was a vega20 specific hack.  Check if we are in reset
and what reset method we are using.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

there are two paths for renoir dc access smu.
one dc access smu directly using bios smc
interface: set disply, dprefclk, etc.
another goes through pplib for get dpm clock
table and set watermmark.
Signed-off-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable runtime VCN DPM on/off on Arcturus.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Bug fix for pcie paramerers override on swsmu.
Below is a scenario to have this problem.
pptable definition on pcie dpm:
0 -> pcie gen speed:1, pcie lanes: *16
1 -> pcie gen speed:4, pcie lanes: *16
Then if we have a system only have the capbility:
pcie gen speed: 3, pcie lanes: *8,
we will override dpm 1 to pcie gen speed 3, pcie lanes *8.
But the code skips the dpm 0 configuration.
So the real pcie dpm parameters are:
0 -> pcie gen speed:1, pcie lanes: *16
1 -> pcie gen speed:3, pcie lanes: *8
Then the wrong pcie lanes will be toggled.
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

BACO reset is needed for RAS recovery.
Signed-off-by: NLe Ma <le.ma@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1 indicates RAS recovery flag in SMU FW.
Signed-off-by: NLe Ma <le.ma@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Program THM_BACO_CNTL.SOC_DOMAIN_IDLE=1 will tell VBIOS to disable ECC when
BACO exit. This can save BACO exit time by PSP on none-ECC SKU. Drop the setting
for ECC supported SKU.
Signed-off-by: NLe Ma <le.ma@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SMU firmware has fix the bug, so remove this workaround.
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add navi14 umd pstate peak clock support.

NAVI14_UMD_PSTATE_PEAK_XT_GFXCLK   1670 MHz
NAVI14_UMD_PSTATE_PEAK_XTM_GFXCLK  1448 MHz
NAVI14_UMD_PSTATE_PEAK_XLM_GFXCLK  1181 MHz
NAVI14_UMD_PSTATE_PEAK_XTX_GFXCLK  1717 MHz
NAVI14_UMD_PSTATE_PEAK_XL_GFXCLK   1448 MHz
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently this is only supported on Vega20 with 40.50 and later
SMC firmware.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently this is only supported on Vega20 with 40.50 and later
SMC firmware.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add toggles for more power features.  Helpful in debugging.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

@swap@
identifier TEMP;
expression A,B;
@@
- TEMP = A;
- A = B;
- B = TEMP;
+ swap(A, B);

@@
type T;
identifier swap.TEMP;
@@
(
- T TEMP;
|
- T TEMP = {...};
)
... when != TEMP

Cc: Rex Zhu <rex.zhu@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Additional features that can be enabled in the SMU.
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Polaris and vegam use count for the value rather than
level.  This looks like a copy paste typo from when
the code was adapted from previous asics.

I'm not sure that the SMU actually uses this value, so
I don't know that it actually is a bug per se.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108609Reported-by: NRobert Strube <rstrube@gmail.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The error handling is off by one.  We should not free the first
"tables[i].bo" without decrementing "i" because that might result in a
double free.  The second problem is that when an error occurs, then the
zeroth element "tables[0].bo" isn't freed.

I had make "i" signed int for the error handling to work, so I just
updated "ret" as well as a clean up.

Fixes: f96357a9 ("drm/amd/powerplay: implement smu_init(fini)_fb_allocations function")
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>