This fixes the bug discovered by Marek Lindner which did not allow
turning on the vis-server before an interface has been added. With this
patch we are using a global atomic variable for activating and
deactiating the vis-server-mode, which can be used before
inserting an interface.
Signed-off-by: NLinus Luessing <linus.luessing@web.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes a variable that became obsolete since the skb handling
replaced the packet handling thread.
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The routing code has 2 sections which warn about ttl exceeded. The
corresponding warnings were identical which makes it hard to debug. In
addition, batman-adv does not need to warn about ttl exceeded in case
we encountered an echo request as this is commonly used to generate
traceroute graphs.
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As in other parts of batman-adv, we should not lock while sending a packet but
keep the lock held for as short as possible. Additionally, we should check
whether the interface is active, otherwise batman_if->net_dev might not be
available ...
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The code which uses the raw packet sockets was removed. The only related
dependencies are the skb and netdev handling code. This is provided by
NET in Kconfig.
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Staticise a number of functions which aren't exported outside their
source files, and also add a __user annotation for the buffer in
iio_event_chrdev_read().
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a patch to the ni_daq_700.c file that fixes up brace and 80 character warnings
found by the checkpatch.pl tool
Signed-off-by: NGraham M Howe <gman.1352@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

VMIVME-7805 board has a special control register that has to be used in
order to activate the VME bus access via the Universe II bridge.
This control register also handles endianess convertion.
Signed-off-by: NArthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: NVincent Bossier <vincent.bossier@iba-group.com>
Acked-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For VME device I/O operations on master windows the user driver tends
to use kern_buf buffer array which is not allocated. This causes an error
when reading from master window device files.
Signed-off-by: NArthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: NVincent Bossier <vincent.bossier@iba-group.com>
Acked-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When requesting slave resources A16 addressing mode flag is used to find
available windows. Since the ca91cx42 bridge only supports two A16 slave windows
but four are requested, the driver fails to initialize. The flag has been
changed to A24, which is supported by all slave windows.
Signed-off-by: NArthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: NVincent Bossier <vincent.bossier@iba-group.com>
Acked-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Provide vme_user_llseek() implementation.
Signed-off-by: NArthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: NVincent Bossier <vincent.bossier@iba-group.com>
Acked-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the code from the drivers that we are not going to implement before
submitting for review.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Sort out slot detection on the ca91cx42.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for Master Read-Modify-Write cycles on the ca91cx42.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The ca91cx42 driver currently incorrectly handles master windows, setting
and retrieving the sizing parameters incorrectly. Also, in the slave window
handling, it uses an incorrectly set variable.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for the DMA controller in the ca91cx42 bridge.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The vme_master_resource structure contains an item called "pci_resource".
Rename to make bus agnostic.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

At the moment the vme bridge drivers are written in a way that only
allows them to support one bridge at a time. Modify the drivers to
enable more than one bridge to be present per board.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Check the directions in which the DMA controller is expected to operate
before giving control of a resource.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch corrects author email addresses and Copyright notices as a
result of the split up of the GE Fanuc joint venture.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

rtl8187se needs to include semaphore.h to prevent build errors:

drivers/staging/rtl8187se/ieee80211/ieee80211.h:1004: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8187se/ieee80211/ieee80211.h:1005: error: field 'scan_sem' has incomplete type
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove last remaining printk and clarify comments
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Specify Kconfig dependencies, and include warnings for building as a module

udlfb is dependent on FB_DEFERRED_IO, FB_SYS_*, and FB_MODE_HELPERS

Because many kernels do not include defio (which cannot be built
as a module), yet users want to be able to build udlfb as a module later,
udlfb has ifdefs and these dependency warnings to help udlfb build with or
without certain dependencies, but also print warnings for any lost function.

Even though this kind of flexibility isn't common, we've gotten feedback
from a significant portion of users that they were frustrated without it.
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for fbdev mmap clients who don't send damage ioctls

Because DisplayLink devices are out on the other end of usb, their
"framebuffer" is just normal system memory. So memory mapped writes
don't automatically trigger anything. So up to this point, standard
fbdev clients who rely on mmap() will get an unchanging screen.

This patch makes udlfb a client of Jaya Kumar's defio framework - which sets
up page fault triggers, and those faults are accumulated and sent to udlfb
on a defferred basis, to process as damage notifications for the framebuffer.

Because this involves more overhead than a notification directly from
the application (e.g. just passing on X DAMAGE extension notifications),
a sysfs attribute is provided by udlfb to control defio support.

/sys/class/graphics/fb*/use_defio - writing a "0" to this file before
calling mmap() causes defio to not be initialized - instead udlfb
will rely on getting damage notifications directly through the damage ioctl.

There are unsolved rendering problems with defio (horizontal dead regions
on framebuffer, that accumulate over time) which still needs a fix.
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rework rendering for improved performance

Approx 10-20% gain avg across several "benchmarks": x11perf, gtkperf, glxgears
Moves from a single pre-alloc'd urb protected by a long-held mutex
To a list of (4) pre-alloc'd urbs which can be dispatched asynchonously

Improved rendering algorithm to hardware with lower CPU consumption,
fewer system memory accesses, and slightly higher compression.

Better scalability to multiple processors, especially with
multiple framebuffers active.
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rework probe to use refcounts and std functions

Because the different parts of the driver (usb, fbdev) tear down
in different orders, the driver previously could crash accessing
data that had already been freed.  Refcounting system used to handle.

Reworked probe to make use of refcounts, set mode using std fbops,
and set up sysfs and pre-allocated urbs.
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add sysfs controls for edid and performance metrics

There are 8 new files exposed in /sys/class/graphics/fb*

edid - returns 128 byte edid blog, suitable for parsing with parse-edid
metrics_bytes_identical
metrics_bytes_rendered
metrics_bytes_sent
metrics_cpu_kcycles_used
metrics_misc
and metrics_reset, which resets all perf metrics to zero

The 6 perf metrics are of type atomic_t.
So these metrics return precise results for short benchmarks, but
any test approx a minute or longer runtime may roll over.
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move to more consistent naming scheme

All udlfb functions start with udlfb_
All functions for udlfb's fbdev interface start with udlfb_ops_
All functinos for udlfb's usb interface start with udlfb_usb_
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add functions to pre-allocate and free usb bulk urbs for core render path.

Udlfb currently allocates a single urb, guarded by a mutex, that is a key
bottleneck. Because udlfb sends so much data, preallocation is most efficient.

Functions will be used by new rendering functions in later patches.
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reorganize the location of a few things to be closer to related code
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Eliminate checkpatch.pl warnings and errors so later patches in series are clean
Signed-off-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove dead code from r8185b_init.c.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For the RTL8187SE, the variable priv->rf_chip is always RF_ZEBRA4
and priv->RegThreeWireMode is always HW_THREE_WIRE_SI. Remove these
2 variables.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove a routine that is not used.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanups as suggested by checkpatch.pl utiltiy.
.o's from before and after cleanup have matching SHA1s.
Signed-off-by: NSvenne Krap <svenne@krap.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Trivial changes to code-paths.
Signed-off-by: NSvenne Krap <svenne@krap.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a patch to ni_atmio.c file to fix up bracing style problems
found by checkpatch.pl tool
Signed-off-by: NGraham M Howe <gman.1352@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It's clear from the indent levels and the context that there are supposed to
be curly braces here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The current driver does not follow the state of the RF switch.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>