Staging: vme: VMIVME-7805 board support

VMIVME-7805 board has a special control register that has to be used in
order to activate the VME bus access via the Universe II bridge.
This control register also handles endianess convertion.
Signed-off-by: NArthur Benilov <arthur.benilov@iba-group.com>
Signed-off-by: NVincent Bossier <vincent.bossier@iba-group.com>
Acked-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/vme/Kconfig

@@ -14,4 +14,6 @@ source "drivers/staging/vme/bridges/Kconfig"
 
 source "drivers/staging/vme/devices/Kconfig"
 
+source "drivers/staging/vme/boards/Kconfig"
+
 endif # VME

drivers/staging/vme/Makefile

@@ -5,3 +5,4 @@ obj-$(CONFIG_VME_BUS)		+= vme.o
 
 obj-y				+= bridges/
 obj-y				+= devices/
+obj-y				+= boards/

drivers/staging/vme/boards/Kconfig

+comment "VME Board Drivers"
+
+config VMIVME_7805
+	tristate "VMIVME-7805"
+	help
+	  If you say Y here you get support for the VMIVME-7805 board.
+	  This board has an additional control interface to the Universe II
+	  chip. This driver has to be included if you want to access VME bus
+	  with VMIVME-7805 board.

drivers/staging/vme/boards/Makefile

+#
+# Makefile for the VME board drivers.
+#
+
+obj-$(CONFIG_VMIVME_7805)	+= vme_vmivme7805.o

drivers/staging/vme/boards/vme_vmivme7805.c

+/*
+ * Support for the VMIVME-7805 board access to the Universe II bridge.
+ *
+ * Author: Arthur Benilov <arthur.benilov@iba-group.com>
+ * Copyright 2010 Ion Beam Application, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/io.h>
+
+#include "vme_vmivme7805.h"
+
+static int __init vmic_init(void);
+static int vmic_probe(struct pci_dev *, const struct pci_device_id *);
+static void vmic_remove(struct pci_dev *);
+static void __exit vmic_exit(void);
+
+/** Base address to access FPGA register */
+static void *vmic_base;
+
+static char driver_name[] = "vmivme_7805";
+
+static struct pci_device_id vmic_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VMIC, PCI_DEVICE_ID_VTIMR) },
+	{ },
+};
+
+static struct pci_driver vmic_driver = {
+	.name = driver_name,
+	.id_table = vmic_ids,
+	.probe = vmic_probe,
+	.remove = vmic_remove,
+};
+
+static int __init vmic_init(void)
+{
+	return pci_register_driver(&vmic_driver);
+}
+
+static int vmic_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int retval;
+	u32 data;
+
+	/* Enable the device */
+	retval = pci_enable_device(pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "Unable to enable device\n");
+		goto err;
+	}
+
+	/* Map Registers */
+	retval = pci_request_regions(pdev, driver_name);
+	if (retval) {
+		dev_err(&pdev->dev, "Unable to reserve resources\n");
+		goto err_resource;
+	}
+
+	/* Map registers in BAR 0 */
+	vmic_base = ioremap_nocache(pci_resource_start(pdev, 0), 16);
+	if (!vmic_base) {
+		dev_err(&pdev->dev, "Unable to remap CRG region\n");
+		retval = -EIO;
+		goto err_remap;
+	}
+
+	/* Clear the FPGA VME IF contents */
+	iowrite32(0, vmic_base + VME_CONTROL);
+
+	/* Clear any initial BERR  */
+	data = ioread32(vmic_base + VME_CONTROL) & 0x00000FFF;
+	data |= BM_VME_CONTROL_BERRST;
+	iowrite32(data, vmic_base + VME_CONTROL);
+
+	/* Enable the vme interface and byte swapping */
+	data = ioread32(vmic_base + VME_CONTROL) & 0x00000FFF;
+	data = data | BM_VME_CONTROL_MASTER_ENDIAN |
+			BM_VME_CONTROL_SLAVE_ENDIAN |
+			BM_VME_CONTROL_ABLE |
+			BM_VME_CONTROL_BERRI |
+			BM_VME_CONTROL_BPENA |
+			BM_VME_CONTROL_VBENA;
+	iowrite32(data, vmic_base + VME_CONTROL);
+
+	return 0;
+
+err_remap:
+	pci_release_regions(pdev);
+err_resource:
+	pci_disable_device(pdev);
+err:
+	return retval;
+}
+
+static void vmic_remove(struct pci_dev *pdev)
+{
+	iounmap(vmic_base);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+
+}
+
+static void __exit vmic_exit(void)
+{
+	pci_unregister_driver(&vmic_driver);
+}
+
+MODULE_DESCRIPTION("VMIVME-7805 board support driver");
+MODULE_AUTHOR("Arthur Benilov <arthur.benilov@iba-group.com>");
+MODULE_LICENSE("GPL");
+
+module_init(vmic_init);
+module_exit(vmic_exit);
+

drivers/staging/vme/boards/vme_vmivme7805.h

+/*
+ * vmivme_7805.h
+ *
+ * Support for the VMIVME-7805 board access to the Universe II bridge.
+ *
+ * Author: Arthur Benilov <arthur.benilov@iba-group.com>
+ * Copyright 2010 Ion Beam Application, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef _VMIVME_7805_H
+#define _VMIVME_7805_H
+
+#ifndef PCI_VENDOR_ID_VMIC
+#define PCI_VENDOR_ID_VMIC		0x114A
+#endif
+
+#ifndef PCI_DEVICE_ID_VTIMR
+#define PCI_DEVICE_ID_VTIMR		0x0004
+#endif
+
+#define VME_CONTROL			0x0000
+#define BM_VME_CONTROL_MASTER_ENDIAN	0x0001
+#define BM_VME_CONTROL_SLAVE_ENDIAN	0x0002
+#define BM_VME_CONTROL_ABLE		0x0004
+#define BM_VME_CONTROL_BERRI		0x0040
+#define BM_VME_CONTROL_BERRST		0x0080
+#define BM_VME_CONTROL_BPENA		0x0400
+#define BM_VME_CONTROL_VBENA		0x0800
+
+#endif /* _VMIVME_7805_H */
+