Closes bug 9065
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add id for the Hewlett-Packard LD220-HP POS pole display.

Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard
Signed-off-by: NMike Provencher <mike.provencher@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the "Superial" USB-Serial converter to pl2303 so that it
is detected, by the correct driver.  Adds the relevant vendor:product
(5372:2303) to the device tables in pl2303.c & pl2303.h.  The patch has
been tested against 2.6.24-22-generic.
Signed-off-by: NMatthew D Arnold <matthew.arnold-1@uts.edu.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB ID 4348:5523 is handled by the ch341 driver.  Remove it from the
pl2023 driver.

Reverts 002e8f2c.
Signed-off-by: NTollef Fog Heen <tfheen@err.no>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As reported by Ken A Scott <kscott9@sent.com>

Cc: Ken A Scott <kscott9@sent.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've just got a USB GPRS/EDGE modem branded Manufacturer Micromax Model
MMX610U (see http://www.airtel.in/level2_t3data.aspx?path=1/106/179)
working by adding another product ID to pl2303.  Modem info reports same
module as  Max Arnold's i.e.SIMCOM SIM600  but  with product ID 0x0612
(cf Ox0611).

From: Steve Murphy <steve@gnusis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch reverts 57833ea6
("usb-serial: pl2303: add support for RATOC REX-USB60F") and adds
support for the device to ftdi_sio driver.

Cc: Akira Tsukamoto <akirat@rd.scei.sony.co.jp>
Cc: stable <stable@kernel.org>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm
contains Prolific 2303 chip.
Actually their site a bit outdated - I have AlDiga AL-11U
GSM/GPRS/EDGE modem and it works with pl2303 module after adding
corresponding product ID.

By default modem uses baud rate 460800.  GSM chipset - SIMCom SIM600,
quad band 850/900/1800/1900 MHz

Device info:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=067b ProdID=0611 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303
E:  Ad=81(I) Atr=03(Int.) MxPS=  10 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

From: Max Arnold <lwarxx@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pl2303: add support for RATOC REX-USB60F

This patch adds support for RATOC REX-USB60F Serial Adapters,
which is widely used in Japan recently.

Cc: stable <stable@kernel.org>
Signed-off-by: NAkira Tsukamoto <akirat@rd.scei.sony.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove entry for Huawei E620 UMTS/HSDPA card (ID: 12d1:1001) in pl2303 driver
Option driver is use instead

Cc: stable <stable@kernel.org>
Signed-off-by: NDaniel Kozák <kozzi11@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This simply adds the "YC Cable" as a vendor and its pl2303-based
USB<->Serial adapter as a product.  This particular adapter is sold by
Radio Shack.  I've done limited testing on a few different systems with
no issues.

Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

add support for:

  4348:5523 WinChipHead USB->RS 232 adapter with Prolifec PL 2303 chipset

[ mingo@elte.hu: merged it and nursed it upstream ]

Cc: stable <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pl2303: add support for Corega CG-USBRS232R

This patch adds support for Corega CG-USBRS232R Serial Adapters.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the IO Data Device USB-RSAQ5, PL2303 based
USB-serial converter, to pl2303 driver
Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the BenQ Mobile Phone EF81 to pl2303
Signed-off-by: NAndreas Loibl <andreas@andreas-loibl.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Patch to add support for Alcor Micro Corp. USB 2.0 TO RS-232 converter.
This patch adds VID and PID to pl2303.[ch], adds it to the "HORRIBLE
HACK FOR PL2303" in usb-serial.c and also prevents cdc-acm to claim
driving this device by blacklisting it in hid-core.
Signed-off-by: NJohannes Steingraeber <Jo_Stein@web.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes support for a clone of Nokia DKU-5 cable made by Ours
Technology Inc, as it turned out that the cable does not use the pl2303
chip, but OTI-6858 chip which is not compatible with the pl2303.
Signed-off-by: NTomasz Kazmierczak <tomek.fizyk@op.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Can you add the USB IDs for the Belkin USB Serial adapter (P/N F5U257)
to the pl2303 driver in the Linux Kernel? Are you the appropriate person
to approach for this?

I recently purchased a Belkin USB Serial adapter (P/N F5U257) and found
that it didn't work. After a bit of experimentation I found that it
works with the pl2303 driver once the ID has been added. See attached
patch to fix this. Also attached is the output from lsusb -v just in
case you require any information from there.


From: Kim Oldfield <luv@oldfield.wattle.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The Susteen Datapilot cable
(http://www.susteen.com/productdetail/71/producthl/Notempty) has an
internal pl2303 to communicate with a set of dummy connector-ends that
connect to a variety of cell phones. I've found that it works right out
of the box by simply adding the product/vendor id to the pl2303 driver.
Signed-off-by: NMatt Meno <mmeno@idealcorp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Text from the back of the box, for your information/amusement:

 USB DATA CABLE
   FOR K700 Series

 The USB Cable is an ideal link between your mobile phone and PC. Employing
 the user-friendiy [sic] USB standard,its capacity for rapid data transfer enables functions
 such as synchronization of phone book and calendar,as well as Internet browsing via
 a modem-enabled phone.Autual [sic] connection speed is dependent on phone capacity.

 MADE IN CHINA

From: Peter Moulder <Peter.Moulder@infotech.monash.edu.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add new iTegno usb CDMA 1x card (usbid '0eba:2080') support to pl2303 driver
Signed-off-by: NWang Jun <wangjun1974@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for a clone of Nokia DKU-5 cable made by
Ours Technology Inc for Nokia phones with PopPort (Nokia 3100 and others).
The cable uses PL2303 USB-to-serial converter from Prolific Technology Inc.
Signed-off-by: NTomasz Kazmierczak <tomek.fizyk@op.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The USB data cable for my Samsung GSM phone contains the USB-to-serial
converter chip MS3303H from Speed Dragon Multimedia, Inc.  that appears to
be compatible with the PL2303 chip.  The following patch adds support for
this chip to the pl2303 driver.
Signed-off-by: NDick Streefland <dick@streefland.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The patch adds the USB ID (0413:2101) for the Leadtek GPS-Mouse 9531 to
the driver pl2303.
Signed-off-by: NChristian Lindner <christian.lindner@gmx.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NFALIPOU F Developer <fred.falipou@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added support for CA-42 clone cable (www.ca-42.com)
Signed-off-by: NMartin Gingras <martin.gingras@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds two new Siemens mobiles IDs for the pl2303 driver.
Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds the product ID and vendor ID for a Nokia CA-42 USB cable
to the list of devices handled by the pl2303 driver. The patch is
against 2.6.13.
Signed-off-by: NRobert Spanton <rds204@zepler.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Please accept the attached patch which adds the vendorid 0x0745 and
modelid 0x0001 (ID 0745:0001) "Syntech Information Co., Ltd."

The device is an USB IR cradle for a barcode scanner (CPT-8001C) from
Cipherlab.


From: Peter Favrholdt <pfavr@mip.sdu.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -u kernel-source-2.6.11/drivers/usb/serial/pl2303.c ../kernel-source-2.6.11/drivers/usb/serial/pl2303.c

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!