- 12 7月, 2009 2 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 097041e5. Trond had a better fix, which is the parent of this one ("Fix compile error due to congestion_wait() changes") Requested-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h so that it is available to all callers of set/clear_bdi_congested(). This replaces commit 097041e5 ("fuse: Fix build error"), which will be reverted. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 7月, 2009 33 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - targa and targa-2ch fix ALSA: hda - fix beep tone calculation for IDT/STAC codecs ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC) ALSA: hda - Disable AMD SB600 64bit address support only ALSA: hda - Check widget types while parsing capture source in patch_via.c ALSA: hda - Fix capture source selection in patch_via.c ALSA: hda - Add missing EAPD initialization for VIA codecs ALSA: hda - Clean up VT170x dig-in initialization code ALSA: hda - Fix error path in the sanity check in azx_pcm_open() ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section ASoC: Fix wm8753 register cache size and initialization ASoC: add locking to mpc5200-psc-ac97 driver ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared ASoC: Fix register cache initialisation for WM8753
-
commit 5404ac8e ("isofs: cleanup mount option processing") missed conversion of joliet option flag resulting in non-working Joliet support. CC: walt <w41ter@gmail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
PL2303 has private data shovelling methods that also have no fast path. Fix them to work the same way as the default handler. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
The sysrq code acquired a kref leak. Fix it by passing the tty separately from the caller (thus effectively using the callers kref which all the callers hold anyway) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
We can't go around calling all sorts of magic per character functions at full rate 3G data speed. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/ubi-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: fix compilation warnings UBI: fix NOR flash recovery UBI: nicify image sequence number handling UBI: add image sequence number to EC header UBI: remove bogus debugging checks UBI: add empty eraseblocks verification
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix corruption dump UBIFS: clean up free space checking UBIFS: small amendments in the LEB scanning code UBIFS: dump a little more in case of corruptions MAINTAINERS: update ahunter's e-mail address UBIFS: allow more than one volume to be mounted UBIFS: fix assertion warning UBIFS: minor spelling and grammar fixes UBIFS: fix 64-bit divisions in debug print UBIFS: few spelling fixes UBIFS: set write-buffer timout to 3-5 seconds UBIFS: slightly optimize write-buffer timer usage UBIFS: improve debugging messaged UBIFS: fix integer overflow warning
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] define KTIME_SCALAR for 32-bit s390 [S390] add generic atomic64 support for 31 bit [S390] improve suspend/resume error messages [S390] set SCHED_OMIT_FRAME_POINTER for s390 [S390] add __ucmpdi2() helper function [S390] perf_counter build fix [S390] shutdown actions: save/return rc from init function [S390] dasd: correct debugfeature sense dump [S390] udelay: disable lockdep to avoid false positives [S390] monreader: fix dev_set_drvdata conversion [S390] sclp: fix compile error for !SCLP_CONSOLE
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'for-linus' of git://git.open-osd.org/linux-open-osd: osdblk: Adjust queue limits to lower device's limits osdblk: a Linux block device for OSD objects MAINTAINERS: Add osd maintained files (F:) exofs: Avoid using file_fsync() exofs: Remove IBM copyrights exofs: Fix bio leak in error handling path (sync read)
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits) drm/i915: Fix for LVDS VBT change on IGDNG drm/i915: Zap the GTT mapping when transitioning from untiled to tiled. drm/i915: Refactor calls to unmap_mapping_range drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode drm: Disable the unused connectors explicitly when resuming with KMS. drm/i915: Restore the KMS modeset for every activated CRTC drm/i915: Fix harmless warning from patch merged after i2c rework. drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture. drm/i915: Check the LID device to decide whether the LVDS should be initialized drm/i915: Move lock to more reasonable location drm/i915: Add gtt_offset to gem object list debugfs output drm/i915: Remove gtt_bound from drm_i915_gem_object drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF. drm/i915: crt fetch EDID by DVI-I converter on G4x platform drm/i915: Don't update display FIFO watermark on IGDNG drm/i915: Adjust DisplayPort clocks to use 96MHz reference drm/i915: Make driver less chatty drm/i915: fix up a raw 64bit divide drm/i915: enable sdvo lvds scaling function. drm/i915: Set SSC frequency for 8xx chips correctly ...
-
由 Amerigo Wang 提交于
exception.txt only explains the code on x86, so it's better to move it into Documentation/x86 directory. And also rename it to exception-tables.txt which looks much more reasonable. This patch is on top of the previous one. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Amerigo Wang 提交于
Update Documentation/exception.txt. Remove trailing whitespaces in it. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Larry Finger 提交于
When building v2.6.31-rc2-344-g69ca06c9, the following build errors are found due to missing includes: CC [M] fs/fuse/dev.o fs/fuse/dev.c: In function ‘request_end’: fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function) ... fs/nfs/write.c: In function ‘nfs_set_page_writeback’: fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function) Signed-off-by: Larry Finger@lwfinger.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: reset oom_cfqq in cfq_set_request() block: fix sg SG_DXFER_TO_FROM_DEV regression block: call blk_scsi_ioctl_init() Fix congestion_wait() sync/async vs read/write confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix disorder in cp count on error during deleting checkpoints nilfs2: fix lockdep warning between regular file and inode file nilfs2: fix incorrect KERN_CRIT messages in case of write failures nilfs2: fix hang problem of log writer which occurs after write failures nilfs2: remove unlikely directive causing mis-conversion of error code
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: dma-debug: Fix the overlap() function to be correct and readable oprofile: reset bt_lost_no_mapping with other stats x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon signals: declare sys_rt_tgsigqueueinfo in syscalls.h rcu: Mark Hierarchical RCU no longer experimental dma-debug: Put all hash-chain locks into the same lock class dma-debug: fix off-by-one error in overlap function
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits) perf report: Add "Fractal" mode output - support callchains with relative overhead rate perf_counter tools: callchains: Manage the cumul hits on the fly perf report: Change default callchain parameters perf report: Use a modifiable string for default callchain options perf report: Warn on callchain output request from non-callchain file x86: atomic64: Inline atomic64_read() again x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative() x86: atomic64: Improve atomic64_xchg() x86: atomic64: Export APIs to modules x86: atomic64: Improve atomic64_read() x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP x86: atomic64: Fix unclean type use in atomic64_xchg() x86: atomic64: Make atomic_read() type-safe x86: atomic64: Reduce size of functions x86: atomic64: Improve atomic64_add_return() x86: atomic64: Improve cmpxchg8b() x86: atomic64: Improve atomic64_read() x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too perf report: Annotate variable initialization ...
-
由 Peter Zijlstra 提交于
Optimize cond_resched() by removing one conditional. Currently cond_resched() checks system_state == SYSTEM_RUNNING in order to avoid scheduling before the scheduler is running. We can however, as per suggestion of Matt, use PREEMPT_ACTIVE to accomplish that very same. Suggested-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Pull the initial preempt_count value into a single definition site. Maintainers for: alpha, ia64 and m68k, please have a look, your arch code is funny. The header magic is a bit odd, but similar to the KERNEL_DS one, CPP waits with expanding these macros until the INIT_THREAD_INFO macro itself is expanded, which is in arch/*/kernel/init_task.c where we've already included sched.h so we're good. Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhenyu Wang 提交于
IGDNG mobile chip's LVDS data block removes panel fitting register definition. So this fixes offset for LVDS timing block parsing. Thanks for Michael Fu to catch this. Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Eric Anholt 提交于
As of 52dc7d32, we could leave an old linear GTT mapping in place, so that apps trying to GTT-mapped write in tiled data wouldn't get the fence added, and garbage would get displayed. Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
As we call unmap_mapping_range() twice in identical fashion, refactor and attempt to explain why we need to call unmap_mapping_range(). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Ingo Molnar 提交于
Linus noticed how unclean and buggy the overlap() function is: - It uses convoluted (and bug-causing) positive checks for range overlap - instead of using a more natural negative check. - Even the positive checks are buggy: a positive intersection check has four natural cases while we checked only for three, missing the (addr < start && addr2 == end) case for example. - The variables are mis-named, making it non-obvious how the check was done. - It needlessly uses u64 instead of unsigned long. Since these are kernel memory pointers and we explicitly exclude highmem ranges anyway we cannot ever overflow 32 bits, even if we could. (and on 64-bit it doesnt matter anyway) All in one, this function needs a total revamp. I used Linus's suggestions minus the paranoid checks (we cannot overflow really because if we get totally bad DMA ranges passed far more things break in the systems than just DMA debugging). I also fixed a few other small details i noticed. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Zhao Yakui 提交于
In KMS mode we now use the normal mode-setting paths to set the modes back to the current configuration, so we don't need to also run the more limited non-KMS implementation of modesetting for resume. Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhao Yakui 提交于
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Acked-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhao Yakui 提交于
Restore the modeset for every activated CRTC in course of resume. This is realized by calling the function of drm_helper_resume_force_mode. Note: it is meaningful only for the KMS mode. https://bugs.freedesktop.org/show_bug.cgi?id=21719 https://bugs.freedesktop.org/show_bug.cgi?id=21708 https://bugs.freedesktop.org/show_bug.cgi?id=22285 https://bugs.freedesktop.org/show_bug.cgi?id=22263Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Eric Anholt 提交于
Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Eric Anholt 提交于
This is seen on some G41 systems, where the BIOS will consume all but a few KB of the aperture. This should be bad for all operating systems, as it means that the OS can't dynamically manage memory between graphics and the rest of the system, and OSes that did static memory management statically add memory in addition to the BIOS allocation anyway. So, instead of working around it, just fail out verbosely. fd.o bug #21574 Signed-off-by: NEric Anholt <eric@anholt.net> Reviewed-by: NIan Romanick <ian.d.romanick@intel.com>
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix trace_print_seq() kprobes: No need to unlock kprobe_insn_mutex tracing/fastboot: Document the need of initcall_debug trace_export: Repair missed fields tracing: Fix stack tracer sysctl handling
-
由 Vivek Goyal 提交于
In case memory is scarce, we now default to oom_cfqq. Once memory is available again, we should allocate a new cfqq and stop using oom_cfqq for a particular io context. Once a new request comes in, check if we are using oom_cfqq, and if yes, try to allocate a new cfqq. Tested the patch by forcing the use of oom_cfqq and upon next request thread realized that it was using oom_cfqq and it allocated a new cfqq. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use the block layer mapping API (2.6.28). Douglas Gilbert explained SG_DXFER_TO_FROM_DEV: http://www.spinics.net/lists/linux-scsi/msg37135.html = The semantics of SG_DXFER_TO_FROM_DEV were: - copy user space buffer to kernel (LLD) buffer - do SCSI command which is assumed to be of the DATA_IN (data from device) variety. This would overwrite some or all of the kernel buffer - copy kernel (LLD) buffer back to the user space. The idea was to detect short reads by filling the original user space buffer with some marker bytes ("0xec" it would seem in this report). The "resid" value is a better way of detecting short reads but that was only added this century and requires co-operation from the LLD. = This patch changes the block layer mapping API to support this semantics. This simply adds another field to struct rq_map_data and enables __bio_copy_iov() to copy data from user space even with READ requests. It's better to add the flags field and kills null_mapped and the new from_user fields in struct rq_map_data but that approach makes it difficult to send this patch to stable trees because st and osst drivers use struct rq_map_data (they were converted to use the block layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer mapping API. zhou sf reported this regiression and tested this patch: http://www.spinics.net/lists/linux-scsi/msg37128.html http://www.spinics.net/lists/linux-scsi/msg37168.htmlReported-by: Nzhou sf <sxzzsf@gmail.com> Tested-by: Nzhou sf <sxzzsf@gmail.com> Cc: stable@kernel.org Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
Currently, blk_scsi_ioctl_init() is not called since it lacks an initcall marking. This causes the command table to be unitialized, hence somce commands are block when they should not have been. This fixes a regression introduced by commit 018e0446Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Commit 1faa16d2 accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 10 7月, 2009 5 次提交
-
-
由 Maynard Johnson 提交于
The bt_lost_no_mapping is not getting reset at the start of a profiling run, thus the oprofiled.log shows erroneous values for this statistic. The attached patch fixes this problem. Signed-off-by: NMaynard Johnson <maynardj@us.ibm.com> Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Takashi Iwai 提交于
* fix/hda: ALSA: hda - targa and targa-2ch fix ALSA: hda - fix beep tone calculation for IDT/STAC codecs ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC) ALSA: hda - Disable AMD SB600 64bit address support only ALSA: hda - Check widget types while parsing capture source in patch_via.c ALSA: hda - Fix capture source selection in patch_via.c ALSA: hda - Add missing EAPD initialization for VIA codecs ALSA: hda - Clean up VT170x dig-in initialization code ALSA: hda - Fix error path in the sanity check in azx_pcm_open() ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section
-
由 Takashi Iwai 提交于
* fix/asoc: ASoC: Fix wm8753 register cache size and initialization ASoC: add locking to mpc5200-psc-ac97 driver ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared ASoC: Fix register cache initialisation for WM8753
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF support [WATCHDOG] SA1100 watchdog maximum timeout [WATCHDOG] w83697ug, fix lock imbalance [WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolons
-
由 Krzysztof Helt 提交于
Remove call to the mx3fb_set_par() and the mx3fb_blank() before the register_framebuffer(). This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-