- 22 12月, 2008 11 次提交
-
-
由 Paul Mundt 提交于
There are no more users for this code, and it has been deprecated for some time, so just kill it off. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The sh cpufreq driver is no longer limited to just the SH-3 and SH-4, update the documentation to reflect this fact accordingly. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Now that the rest of the boards that were using cf-enabler "generically" have switched to setting up their mappings on their own, only the mach-se boards were left using it. All of the cf-enabler using mach-se boards use a special initialization of the MRSHPC windows rather than going through the special PTE as other SH-4 platforms do. This consolidates the MRSHPC setup logic, hooks it up on the boards that care, and gets rid of any and all remaining references to cf-enabler. This has been long overdue, as cf-enabler has been the bane of arch/sh/kernel for the last 7 years. Good riddance. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This gets rid of the cf enabler use on mach-sh03 and switches to use pata_platform with the proper address directly. cf_enabler is subsequently disabled for mach-sh03. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Matt Fleming 提交于
After the recent changes to switch SuperH board support over to irq_chip it is now possible to set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards. Signed-off-by: NMatt Fleming <mjf@gentoo.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This migrates from the old bitrotted kgdb stub implementation and moves to the generic stub. In the process support for SH-2/SH-2A is also added, which the old stub never provided. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Allow users to select CONFIG_CPU_IDLE regardless of processor type or board. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Allow users to select CONFIG_PM regardless of processor type or board. Suspend and hibernation are only allowed on supported platforms. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Peter Griffin 提交于
This patch adds support for the SH-2A FPU based SH7201 processor subtype. Signed-off-by: NPeter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Matt Fleming 提交于
First cut at dynamic ftrace support. Signed-off-by: NMatt Fleming <mjf@gentoo.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 16 12月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
Presently limited to Cayman, Dreamcast, Microdev, and SystemH 7751. Re-enable it for everyone once these have been fixed up. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 31 10月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 20 10月, 2008 2 次提交
-
-
由 Matt Helsley 提交于
This patch implements a new freezer subsystem in the control groups framework. It provides a way to stop and resume execution of all tasks in a cgroup by writing in the cgroup filesystem. The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in the cgroup. Reading will return the current state. * Examples of usage : # mkdir /containers/freezer # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks to get status of the freezer subsystem : # cat /containers/0/freezer.state RUNNING to freeze all tasks in the container : # echo FROZEN > /containers/0/freezer.state # cat /containers/0/freezer.state FREEZING # cat /containers/0/freezer.state FROZEN to unfreeze all tasks in the container : # echo RUNNING > /containers/0/freezer.state # cat /containers/0/freezer.state RUNNING This is the basic mechanism which should do the right thing for user space task in a simple scenario. It's important to note that freezing can be incomplete. In that case we return EBUSY. This means that some tasks in the cgroup are busy doing something that prevents us from completely freezing the cgroup at this time. After EBUSY, the cgroup will remain partially frozen -- reflected by freezer.state reporting "FREEZING" when read. The state will remain "FREEZING" until one of these things happens: 1) Userspace cancels the freezing operation by writing "RUNNING" to the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal and returns EIO) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: export thaw_process] Signed-off-by: NCedric Le Goater <clg@fr.ibm.com> Signed-off-by: NMatt Helsley <matthltc@us.ibm.com> Acked-by: NSerge E. Hallyn <serue@us.ibm.com> Tested-by: NMatt Helsley <matthltc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Magnus Damm 提交于
This patch adds gpio code together with the pinmux table parser. In the future we should optimize this and switch back to gpiolib. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 29 9月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 21 9月, 2008 2 次提交
-
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds support for ftrace to SH. This only includes CONFIG_FTRACE, and does not handle dynamic ftrace presently. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 17 9月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
HAVE_IOREMAP_PROT enables an unconditional reference to generic_access_phys(), which remains undefined in the nommu case. As there's no point in supporting this there anyways, simply fix up the dependency. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 9月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 12 9月, 2008 3 次提交
-
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Now that the rest of the support requirements are out of the way, finally enable support for tracehook. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 08 9月, 2008 5 次提交
-
-
由 Paul Mundt 提交于
All CPUs must have a sensible cpu_clk definition these days, which we can safely use for deriving the preset loops_per_jiffy. The only odd one out is SH-5, which hasn't been hammered in to the framework yet. Based on the ST patch. Signed-off-by: NFrancesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: NCarl Shaw <carl.shaw@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This was initially checked in with a stupid default of y, while most everyone is going to want to have this disabled anyways. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Chris Smith 提交于
Initial support for kprobes/kretprobes for 32-bit SH platforms. [ General cleanup and some rework for the kretprobe hash lock. -- PFM ] Signed-off-by: NChris Smith <chris.smith@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Fixes up compile errors with missing timer definitions. It's pointless to have this enabled anyways if CONFIG_SMP=n. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This hooks up GENERIC_CLOCKEVENTS_BROADCAST and a dummy local timer, which we call in to from the timer IPI when no other local timer is provided. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 04 8月, 2008 3 次提交
-
-
由 Paul Mundt 提交于
SH never really supported a.out, so this was all just copied over blindly from x86 way back when. As we don't reference linux/a.out.h anywhere in the tree, these can now safely be killed off. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
We haven't called in to __do_IRQ() in a long time, so it seems like a reasonable time to switch this on by default. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Needed for fixing up the __raw_spin_is_contended() reference which results in a build error. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 02 8月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
This hooks up the seccomp thread flag and associated callback from the syscall tracer. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 29 7月, 2008 3 次提交
-
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This flattens out the board directories in to individual mach groups, we will use this for getting rid of unneeded directories, simplifying the build system, and becoming more coherent with the refactored arch/sh/include topology. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 28 7月, 2008 5 次提交
-
-
由 Magnus Damm 提交于
Add WVGA and QVGA LCD panel support to Migo-R. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshihiro Shimoda 提交于
This adds initial support for the Renesas R0P7785LC0011RL board. This patch supports 29bit address mode only. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
The CPU of AP-325RXA is SH7723, but a CPU becomes selectable. This patch fixes this problem. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
This patch adds basic support for the SH7763RDP board. This supports a basic stuff provided in SH7763, like SCIF, NOR Flash and USB host. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yusuke Goda 提交于
This board is SH7723 base board. This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound, Ether and other. This patch supports SCIF, NOR Flash. Signed-off-by: NYusuke Goda <goda.yusuke@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-