提交 939a24a6 编写于 作者: P Paul Mundt

sh: Move out the solution engine headers to arch/sh/include/mach-se/

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 e565b518
......@@ -352,253 +352,10 @@ config CPU_SUBTYPE_SH5_103
endchoice
source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu"
menu "Board support"
config SOLUTION_ENGINE
bool
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
config SH_7206_SOLUTION_ENGINE
bool "SolutionEngine7206"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7206
help
Select 7206 SolutionEngine if configuring for a Hitachi SH7206
evaluation board.
config SH_7619_SOLUTION_ENGINE
bool "SolutionEngine7619"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7619
help
Select 7619 SolutionEngine if configuring for a Hitachi SH7619
evaluation board.
config SH_7721_SOLUTION_ENGINE
bool "SolutionEngine7721"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7721
help
Select 7721 SolutionEngine if configuring for a Hitachi SH7721
evaluation board.
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
depends on CPU_SUBTYPE_SH7751R
help
Select SystemH if you are configuring for a Renesas SystemH
7751R evaluation board.
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
select HD6446X_SERIES
depends on CPU_SUBTYPE_SH7709
help
Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
config SH_DREAMCAST
bool "Dreamcast"
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
More information at <http://www.interface.co.jp>
config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
SME product line.
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select IO_TRAPPED
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
config SH_RSK7203
bool "RSK7203"
depends on CPU_SUBTYPE_SH7203
config SH_SDK7780
bool "SDK7780R3"
depends on CPU_SUBTYPE_SH7780
select SYS_SUPPORTS_PCI
help
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
depends on SH_SH7785LCR
default y
help
This board has 2 physical memory maps. It can be changed with
DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
you can access all on-board device in 29bit address mode.
config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723
help
Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
config SH_SH7763RDP
bool "SH7763RDP"
depends on CPU_SUBTYPE_SH7763
help
Select SH7763RDP if configuring for a Renesas SH7763
evaluation board.
config SH_EDOSK7705
bool "EDOSK7705"
depends on CPU_SUBTYPE_SH7705
config SH_SH4202_MICRODEV
bool "SH4-202 MicroDev"
depends on CPU_SUBTYPE_SH4_202
help
Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
with an SH4-202 CPU.
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
config SH_SHMIN
bool "SHMIN"
depends on CPU_SUBTYPE_SH7706
select CPU_HAS_IPR_IRQ
help
Select SHMIN if configuring for the SHMIN board.
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
config SH_X3PROTO
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
help
Select Magic Panel R2 if configuring for Magic Panel R2.
config SH_CAYMAN
bool "Hitachi Cayman"
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
select SYS_SUPPORTS_PCI
endmenu
source "arch/sh/boards/mach-r2d/Kconfig"
source "arch/sh/boards/mach-highlander/Kconfig"
source "arch/sh/boards/mach-sdk7780/Kconfig"
source "arch/sh/boards/mach-migor/Kconfig"
source "arch/sh/boards/mach-magicpanelr2/Kconfig"
source "arch/sh/boards/Kconfig"
menu "Timer and clock configuration"
......
......@@ -101,15 +101,8 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
core-y += arch/sh/kernel/ arch/sh/mm/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
# Boards
machdir-$(CONFIG_SH_SOLUTION_ENGINE) += mach-se/770x
machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += mach-se/7206
machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += mach-se/7619
machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += mach-se/7722
machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += mach-se/7751
machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += mach-se/7780
machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += mach-se/7343
machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += mach-se/7721
# Boards and Mach groups
machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
machdir-$(CONFIG_SH_SH03) += mach-sh03
......@@ -133,8 +126,6 @@ machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2
machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
incdir-y := $(notdir $(machdir-y))
ifneq ($(machdir-y),)
core-y += $(addprefix arch/sh/boards/, \
$(filter-out ., $(patsubst %,%/,$(machdir-y))))
......@@ -159,7 +150,7 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/
boot := arch/sh/boot
cflags-y += -Iarch/sh/include/$(cpuincdir-y)
cflags-y += $(foreach d, $(incdir-y), -Iarch/sh/include/mach-$(d))
cflags-y += $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
KBUILD_CFLAGS += -pipe $(cflags-y)
KBUILD_CPPFLAGS += $(cflags-y)
......
menu "Board support"
config SOLUTION_ENGINE
bool
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
CPU_SUBTYPE_SH7750R
help
Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
config SH_7206_SOLUTION_ENGINE
bool "SolutionEngine7206"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7206
help
Select 7206 SolutionEngine if configuring for a Hitachi SH7206
evaluation board.
config SH_7619_SOLUTION_ENGINE
bool "SolutionEngine7619"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7619
help
Select 7619 SolutionEngine if configuring for a Hitachi SH7619
evaluation board.
config SH_7721_SOLUTION_ENGINE
bool "SolutionEngine7721"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7721
help
Select 7721 SolutionEngine if configuring for a Hitachi SH7721
evaluation board.
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
select CPU_HAS_IPR_IRQ
depends on CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
SH7343 (SH-Mobile 3AS) evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
depends on CPU_SUBTYPE_SH7751R
help
Select SystemH if you are configuring for a Renesas SystemH
7751R evaluation board.
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
select HD6446X_SERIES
depends on CPU_SUBTYPE_SH7709
help
Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
config SH_DREAMCAST
bool "Dreamcast"
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
More information at <http://www.interface.co.jp>
config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
SME product line.
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select IO_TRAPPED
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
config SH_RSK7203
bool "RSK7203"
depends on CPU_SUBTYPE_SH7203
config SH_SDK7780
bool "SDK7780R3"
depends on CPU_SUBTYPE_SH7780
select SYS_SUPPORTS_PCI
help
Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
evaluation board.
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
depends on SH_SH7785LCR
default y
help
This board has 2 physical memory maps. It can be changed with
DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
you can access all on-board device in 29bit address mode.
config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723
help
Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
config SH_SH7763RDP
bool "SH7763RDP"
depends on CPU_SUBTYPE_SH7763
help
Select SH7763RDP if configuring for a Renesas SH7763
evaluation board.
config SH_EDOSK7705
bool "EDOSK7705"
depends on CPU_SUBTYPE_SH7705
config SH_SH4202_MICRODEV
bool "SH4-202 MicroDev"
depends on CPU_SUBTYPE_SH4_202
help
Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
with an SH4-202 CPU.
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select CPU_HAS_IPR_IRQ
select SYS_SUPPORTS_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
config SH_SHMIN
bool "SHMIN"
depends on CPU_SUBTYPE_SH7706
select CPU_HAS_IPR_IRQ
help
Select SHMIN if configuring for the SHMIN board.
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
config SH_X3PROTO
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
help
Select Magic Panel R2 if configuring for Magic Panel R2.
config SH_CAYMAN
bool "Hitachi Cayman"
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
select SYS_SUPPORTS_PCI
endmenu
source "arch/sh/boards/mach-r2d/Kconfig"
source "arch/sh/boards/mach-highlander/Kconfig"
source "arch/sh/boards/mach-sdk7780/Kconfig"
source "arch/sh/boards/mach-migor/Kconfig"
source "arch/sh/boards/mach-magicpanelr2/Kconfig"
......@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/se7206.h>
#include <mach-se/mach/se7206.h>
static inline void delay(void)
......
......@@ -10,7 +10,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <asm/se7206.h>
#include <mach-se/mach/se7206.h>
#define INTSTS0 0x31800000
#define INTSTS1 0x31800002
......
......@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
#include <asm/se7206.h>
#include <mach-se/mach/se7206.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/heartbeat.h>
......
......@@ -13,9 +13,9 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/se7343.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach-se/mach/se7343.h>
static void disable_se7343_irq(unsigned int irq)
{
......
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <machvec.h>
#include <mach/se7343.h>
#include <asm/machvec.h>
#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
#include <asm/irq.h>
#include <asm/io.h>
......
......@@ -6,7 +6,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/se.h>
#include <mach-se/mach/se.h>
/* MS7750 requires special versions of in*, out* routines, since
PC-like io ports are located at upper half byte of 16-bit word which
......
......@@ -13,7 +13,7 @@
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/se.h>
#include <mach-se/mach/se.h>
static struct ipr_data ipr_irq_table[] = {
/*
......
......@@ -9,7 +9,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se.h>
#include <mach-se/mach/se.h>
#include <asm/io.h>
#include <asm/smc37c93x.h>
#include <asm/heartbeat.h>
......
......@@ -11,7 +11,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/se7721.h>
#include <mach-se/mach/se7721.h>
enum {
UNUSED = 0,
......
......@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se7721.h>
#include <mach-se/mach/se7721.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
......
......@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/se7722.h>
#include <mach-se/mach/se7722.h>
static void disable_se7722_irq(unsigned int irq)
{
......
......@@ -17,7 +17,7 @@
#include <linux/smc91x.h>
#include <asm/machvec.h>
#include <asm/clock.h>
#include <asm/se7722.h>
#include <mach-se/mach/se7722.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_keysc.h>
......
......@@ -12,7 +12,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/se7751.h>
#include <mach-se/mach/se7751.h>
#include <asm/addrspace.h>
static inline volatile u16 *port2adr(unsigned int port)
......
......@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/se7751.h>
#include <mach-se/mach/se7751.h>
static struct ipr_data ipr_irq_table[] = {
{ 13, 3, 3, 2 },
......
......@@ -11,7 +11,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se7751.h>
#include <mach-se/mach/se7751.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
......
......@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/se7780.h>
#include <mach-se/mach/se7780.h>
/*
* Initialize IRQ setting
......
......@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se7780.h>
#include <mach-se/mach/se7780.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
......
obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/
obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/
obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += 7619/
obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/
obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
......@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <asm/se7780.h>
#include <mach-se/mach/se7780.h>
#include <asm/io.h>
#include "pci-sh4.h"
......
......@@ -80,11 +80,11 @@ static int __init cf_init_default(void)
}
#if defined(CONFIG_SH_SOLUTION_ENGINE)
#include <asm/se.h>
#include <mach-se/mach/se.h>
#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
#include <asm/se7722.h>
#include <mach-se/mach/se7722.h>
#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
#include <asm/se7721.h>
#include <mach-se/mach/se7721.h>
#endif
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册