As VCN related dpm table setup needs VCN be in PG ungate state. Same logics
applies to JPEG.

V2: fix paste typo
V3: code cosmetic
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NMatt Coffin <mcoffin13@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add lock protections and avoid unnecessary actions
if the PG state is already the same as required.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NMatt Coffin <mcoffin13@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The i2c init/fini functions just register the i2c adapter.
There is no need to call them during hw init/fini.  They only
need to be called once per driver init/fini.  The previous
behavior broke runtime pm because we unregistered the i2c
adapter during suspend.
Tested-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. allow asic to handle sensor type by itself.
2. if not, use smu common sensor to handle it.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take back patch:drop unnecessary message support check
Because the gpu reset fail problem on renoir can be fixed by:
drm/amd/powerplay: skip invalid msg when smu set mp1 state
It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear
code layer.
Signed-off-by: Nchangfeng <Changfeng.Zhu@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The below 3 messages are not supported on Renoir
SMU_MSG_PrepareMp1ForShutdown
SMU_MSG_PrepareMp1ForUnload
SMU_MSG_PrepareMp1ForReset

It needs to revert patch:
drm/amd/powerplay: drop unnecessary message support check
to avoid set mp1 state fail during gpu reset on renoir.
Signed-off-by: Nchangfeng <Changfeng.Zhu@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The driver uses it for EEPROM access, but it's just an i2c bus.

v2: change the callback name as well.
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Per designs, the swSMU code is separated into four layers. And the typical
calling flow should be like: amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c
-> smu_cmn.c. Compile errors will come out for any violations. This can
help to prevent cross callings(e.g. amdgpu_smu.c -> ${asic}_ppt.c ->
amdgpu_smu.c -> ${asic}_ppt.c) which were common in our code.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can eliminate the cross callings and maintain clear
code layer.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These messages are known to be supported by all ASICs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Considering they can be shared by all ASICs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As they are shared by all ASICs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Maximum code sharing.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Considering they are shared by all ASICs.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We are moving to centralize all feature enablement/support checking and
setting APIs in smu_cmn.c.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Considering they are shared by all ASICs. And we are moving
to centralize all feature enablement/support checking and
setting APIs in smu_cmn.c.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Considering it is shared by all ASICs and smu_cmn.c should be
the right place.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Considering it is shared by all ASICs and smu_cmn.c should be
the right place.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As those APIs of smu_v11/v12 are more widely called. And they
need this check also.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By this we can drop redundant code.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Considering the data table retrieving can be more widely shared,
amdgpu_atombios.c is the right place.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

 Add interface for SMU12 device, used by UMR.

v2: fix code style
Signed-off-by: NJinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now navy_flounder will reuse the smu11 driver_if header and ppt
functions for sienna_cichlid. Later navy_flounder can maintain
its own version if the compatibility is broken.
Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can help to maintain clear code layer.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can also help to maintain clear code layer.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Leftover of previous performance level setting cleanups.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Preparing for coming code sharing around performance level
setting.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

From PM FW 58.26.0 for sienna cichlid, SMU mode1 reset
is support, driver sends PPSMC_MSG_Mode1Reset message
to PM FW could trigger this reset.

v2: add mode1 reset dpm interface
v3: change maro name
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As designed the common code shared among all smu v11 ASCIs go to
smu_v11_0.c. This helps to maintain clear code layers.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This helps to maintain clear code layers and drop unnecessary
parameter.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This helps to maintain clear code layers and drop unnecessary
parameter.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As designed the common code shared among all smu v11 ASCIs go to
smu_v11_0.c. This helps to maintain clear code layers.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used sparse(make C=1) to find these loose ends.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Ack-by: NMonk.liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the common code to amdgpu_smu.c instead of having one
copy in both smu_v11_0.c and smu_v12_0.c.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update the calling chain from "amdgpu_smu.c -> ${asic}_ppt.c ->
smu_v11/12_0.c -> amdgpu_smu.c (smu_common_read_sensor())" to "
"amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c". This can help
to maintain clear code layers. More similar changes will be coming.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since .populate_smc_tables is just a wrapper of .set_default_dpm_table.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It has exactly the same functionality as .set_deep_sleep_dcefclk.

V2: correct the macro name for better trace
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>