In an effort to make the vlv/chv wm code look and behave more like the
ilk+ code, let's move the current active wms next to the
corresponding ilk wms.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-4-ville.syrjala@linux.intel.com

Track the plane fifo sizes under intel_crtc instead of under each
intel_plane. Avoids looping over the planes in a bunch of places,
and later we'll move this tracking into the crtc state properly.

v2: Nuke intel_plane_wm_parameters (Maarten)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-3-ville.syrjala@linux.intel.com

In a lot of place we wish to know which planes on the crtc are actually
visible, or how many of them there are. Let's start tracking that in a
bitmask in the crtc state.

We already track enabled planes (ie. ones with an fb and crtc specified by
the user) but that's not quite the same thing as enabled planes may
still end up being invisible due to clipping and whatnot.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-2-ville.syrjala@linux.intel.com

If we manage to tangle errorpaths and get call to callbacks,
it is better to defensively keep them as null until object init is
finished so that we get clean null deref on callsite,
instead of more cryptic wreckage with partly initialized vm objects.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488295691-9404-5-git-send-email-mika.kuoppala@intel.com

The term legacy is subjective. Use 3lvl and 4lvl
where appropriate.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488295691-9404-4-git-send-email-mika.kuoppala@intel.com

If we setup the vm size early, we can use the newly introduced
i915_vm_is_48bit() in majority of callsites wanting to know the vm size.

As we operate either with 3lvl or 4lvl page table structure,
wrap the vm size query inside a function which tells us if
4lvl setup is needed for particular vm, as the following
code uses the function names where level is noted.

v2: use_4lvl (Chris)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488295691-9404-3-git-send-email-mika.kuoppala@intel.com

Don't mark pdps clear if never do the necessary actions
with the hardware to make them clear.

v2: totally get rid of confusing ppgtt bool (Chris)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488295691-9404-2-git-send-email-mika.kuoppala@intel.com

The macro takes a vm pointer at some sites, and dev_priv on others
We were saved as the internal macro never deferences the pointer
given.

As the number of pdpes depend on vm configuration, make it
as a inline function that accepts vm pointer.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wsilon.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1488295691-9404-1-git-send-email-mika.kuoppala@intel.com

The code to check for execlists completion is generic, so move it to
intel_engine_cs.c, where we can reuse the new intel_engine_is_idle().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303121947.20482-2-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

During reset_all_global_seqno() on seqno rollover, we have to update the
HWS. This causes all in flight requests to be completed, so first we
wait. However, we were only waiting for the requests themselves to be
completed and clearing out the waiter rbtrees - what I had missed was
the extra reference in execlists->port[]. Since commit fe9ae7a3
("drm/i915/execlists: Detect an out-of-order context switch") we can
detect when the request is retired before the context switch interrupt
is completed. The impact should be neglible outside of debugging.

Testcase: igt/gem_exec_whisper
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303121947.20482-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

The logic to enable a DDI in intel_mst_pre_enable_dp() is essentially
the same as in intel_ddi_pre_enable_dp(). So reuse the latter function
by calling the post_disable hook on the intel_dig_port instead of
duplicating that code.

v2: Don't oops because of a NULL encoder->crtc. (Ville)
v3: Warn for MST + PORT_E too. (Ville)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-8-ander.conselvan.de.oliveira@intel.com

Remove direct usages of intel_crtc->config from the DDI code. Functions
that didn't yet take a pipe_config as an argument were coverted to do
so.

v2: s/pipe_config/const crtc_state/ (Ville)
  - take crtc from crtc_state. (Ville)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-7-ander.conselvan.de.oliveira@intel.com

Pass intel_crtc to functions intel_ddi_enable_transcoder_func(),
intel_ddi_set_pipe_settings() and intel_ddi_set_vc_payload_alloc(),
instead of the generic crtc type. By changing the functions
intel_ddi_get_crtc_encoder() so that it receives an intel_crtc
parameter, there is no need for the drm_crtc in the callers.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-6-ander.conselvan.de.oliveira@intel.com

It is preferred to pass pipe_config to functions instead of accessing
crtc->config directly. Follow suit and pass pipe_config to the fdi link
train functions.

v2: Add const; s/pipe_config/crtc_state/ (Ville)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-5-ander.conselvan.de.oliveira@intel.com

Using crtc->config directly is being removed in favor of passing a
pipe_config. Follow the trend and pass pipe_config to pch_enable()
functions.

v2: s/pipe_config/crtc_state/ (Ville)
  - constify crtc_state. (Ville)
  - take crtc from crtc_state. (Ville)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-4-ander.conselvan.de.oliveira@intel.com

The function intel_lpt_pch_enable() needs an intel_crtc so pass that
instead of the generic crtc type.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-3-ander.conselvan.de.oliveira@intel.com

The implementation of the fdi_link_train() hooks need an intel_crtc so
just pass that instead of the generic crtc type.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302125857.14665-2-ander.conselvan.de.oliveira@intel.com

Check timer_pending() as well as work_pending() to see if the timer for
the hangcheck has already expired and the work is pending execution on
some list somewhere.

v2: Use a more compact if-chain
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303090056.19973-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>

Adding to the tail of the client request list as the only other user is
in the throttle ioctl that iterates forwards over the list. It only
needs protection against deletion of a request as it reads it, it simply
won't see a new request added to the end of the list, or it would be too
early and rejected. We can further reduce the number of spinlocks
required when throttling by removing stale requests from the client_list
as we throttle.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302122525.19675-1-chris@chris-wilson.co.uk

Currently ILK-BDW explicitly disable LP1+ watermarks from their
.init_clock_gating() hooks. Unfortunately that hook gets called way too
late since by that time we've already initialized all the watermark
state tracking which then gets out of sync with the hardware state.

We may eventually want to consider killing off the explicit LP1+
disable from .init_clock_gating(). In the meantime however, we can
avoid the problem by reordering the init sequence such that
intel_modeset_init_hw()->intel_init_clock_gating() gets called
prior to the hardware state takeover.

I suppose prior to the two stage watermark programming we were
magically saved by something that forced the watermarks to be
reprogrammed fully after .init_clock_gating() got called. But
now that no longer happens.

Note that the diff might look a bit odd as it kills off one
call of intel_update_cdclk(), but that's fine because
intel_modeset_init_hw() does the exact same thing. Previously
we just did it twice.

Actually even this new init sequence is pretty bogus as
.init_clock_gating() really should be called before any gem
hardware init since it can  configure various clock gating
workarounds and whatnot that affect the GT side as well. Also
intel_modeset_init() really should get split up into better
defined init stages. Another "fun" detail is that
intel_modeset_gem_init() is where RPS/RC6 gets configured.
Why that is done from the display code is beyond me. I've
decided to leave all this be for now, and just try to fix
the init sequence enough for watermarks to work.

Cc: stable@vger.kernel.org
Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: David Purton <dcpurton@marshwiggle.net>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-by: NDavid Purton <dcpurton@marshwiggle.net>
Tested-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96645
Fixes: ed4a6a7c ("drm/i915: Add two-stage ILK-style watermark programming (v11)")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220140443.30891-1-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Useful for double checking that the device is powered up when it hung,
include both the status of the power management and our rpm wakelock.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302151544.16915-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>

Whilst investigating some mysterious failures with hangcheck not running
during gem_busy/basic-hang-default, the question is why did we decide to
cancel the retire_work (which queues the hangcheck)? That decision is
based around GT activity, so include that information in the debug
report.

v2: Include the GT awake status in the error state
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302150356.9713-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>

__i915_guc_submit may be, despite my assertion, called from outside of
an irq-safe spinlock so we need to use a full spin_lock_irqsave and not
cheat using a spin_lock. (The initial notify callback from the completed
fence is called before the spinlock is taken to wake up all waiters and
call their callbacks.)

[   48.166581] kernel BUG at drivers/gpu/drm/i915/i915_guc_submission.c:527!
[   48.166617] invalid opcode: 0000 [#1] PREEMPT SMP
[   48.166644] Modules linked in: i915 prime_numbers x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mei_me mei i2c_i801 netconsole i2c_hid [last unloaded: i915]
[   48.166733] CPU: 2 PID: 5 Comm: kworker/u8:0 Tainted: G     U          4.10.0nightly-170302-guc_scrub+ #19
[   48.166778] Hardware name:                  /NUC6i5SYB, BIOS SYSKLi35.86A.0054.2016.0930.1102 09/30/2016
[   48.166835] Workqueue: i915 __intel_autoenable_gt_powersave [i915]
[   48.166865] task: ffff88084ab7cf40 task.stack: ffffc90000064000
[   48.166921] RIP: 0010:__i915_guc_submit+0x1e6/0x2a0 [i915]
[   48.166953] RSP: 0018:ffffc90000067c80 EFLAGS: 00010202
[   48.166979] RAX: 0000000000000202 RBX: ffff8808465e0c68 RCX: 0000000000000201
[   48.167016] RDX: 0000000080000201 RSI: ffff88084ab7d798 RDI: ffff88082b8a8040
[   48.167054] RBP: ffffc90000067cd8 R08: 0000000000000001 R09: 0000000000000000
[   48.167085] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88082b8a8148
[   48.167126] R13: 0000000000000000 R14: ffff88082f440000 R15: ffff88082e85e660
[   48.167156] FS:  0000000000000000(0000) GS:ffff88086ed00000(0000) knlGS:0000000000000000
[   48.167195] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   48.167226] CR2: 000055862ffcdc2c CR3: 0000000001e0f000 CR4: 00000000003406e0
[   48.167257] Call Trace:
[   48.168112]  ? trace_hardirqs_on+0xd/0x10
[   48.168966]  ? _raw_spin_unlock_irqrestore+0x4a/0x80
[   48.169831]  i915_guc_submit+0x1a/0x20 [i915]
[   48.170680]  submit_notify+0x89/0xc0 [i915]
[   48.171512]  __i915_sw_fence_complete+0x175/0x220 [i915]
[   48.172340]  i915_sw_fence_complete+0x2a/0x50 [i915]
[   48.173158]  i915_sw_fence_commit+0x21/0x30 [i915]
[   48.173968]  __i915_add_request+0x238/0x530 [i915]
[   48.174764]  __intel_autoenable_gt_powersave+0x8b/0xb0 [i915]
[   48.175549]  process_one_work+0x218/0x690
[   48.176318]  ? process_one_work+0x197/0x690
[   48.177183]  worker_thread+0x4e/0x4a0
[   48.178039]  kthread+0x10c/0x140
[   48.178878]  ? process_one_work+0x690/0x690
[   48.179718]  ? kthread_create_on_node+0x40/0x40
[   48.180568]  ret_from_fork+0x31/0x40
[   48.181423] Code: 02 00 00 43 89 84 ae 50 11 00 00 e8 75 01 62 e1 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 c1 e0 20 48 09 c2 49 89 d0 eb 82 <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 49 c1 e8 20 44 89 43 34 4a
[   48.183336] RIP: __i915_guc_submit+0x1e6/0x2a0 [i915] RSP: ffffc90000067c80
Reported-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Fixes: 349ab919 ("drm/i915/guc: Make wq_lock irq-safe")
Fixes: 67b807a8 ("drm/i915: Delay disabling the user interrupt for breadcrumbs")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302145323.12886-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Tested-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>

assert_spin_locked() becomes an unconditionally compiled BUG_ON(),
adding debug code right into the heart of critical routines like
interrupt handlers.

   text	   data	    bss	    dec	    hex
1296480	  19944	   2272	1318696	 141f28	before (lockdep disabled)
1295984	  19944	   2272	1318200	 141d38	after

1336261	  21139	   3208	1360608	 14c2e0	before (lockdep enabled)
1339920	  21139	   3208	1364267	 14d12b	after

Small saving for release; hopefully more instructive in debug.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302132801.599-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Everytime we take the fence->lock (aka request->lock), we must do so
with irqs disabled since it may be used from within an hardirq context.
As sometimes we are taking the lock in a nested manner, assert that the
caller did disable the irqs for us.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302115130.28434-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

In order to make cursor updates actually safe wrt. watermark programming
we have to clear the legacy_cursor_update flag in the atomic state. That
will cause the regular atomic update path to do the necessary vblank
wait after the plane update if needed, otherwise the vblank wait would
be skipped and we'd feed the optimal watermarks to the hardware before
the plane update has actually happened.

To make the slow vs. fast path determination in
intel_legacy_cursor_update() a little simpler we can ignore the actual
visibility of the plane (which can only get computed once we've already
chosen out path) and instead we simply check whether the fb is being
set or cleared by the user. This means a fully clipped but logically
visible cursor will be considered visible as far as watermark
programming is concerned. We can do that for the cursor since it's a
fixed size plane and the clipped size doesn't play a role in the
watermark computation.

This should fix underruns that can occur when the cursor gets
enable/disabled or the size gets changed. Hopefully it's good enough
that only pure cursor movement and flips go through unthrottled.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Reported-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Fixes: f79f2692 ("drm/i915: Add a cursor hack to allow converting legacy page flip to atomic, v3.")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170217150159.11683-1-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: NRafael Ristovski <rafael.ristovski@gmail.com>

One of the if statement covers the next line in enable I/O sequence.
This patch correct the same by adding error message.

Fixes: 46448483 ("drm/i915/glk: Add MIPIIO Enable/disable sequence")
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488393082-30660-1-git-send-email-madhav.chauhan@intel.com

Return silently without producing much noise on platforms
that have a HuC but the firmware is absent.

Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@itel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488398335-13121-1-git-send-email-anusha.srivatsa@intel.com

A long time ago we turned off the warning as it was too painful, we had
too much broken code. Turn it back on now as we are mostly clean and
need to prevent returning to such orangeness.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302074157.21631-2-chris@chris-wilson.co.ukReviewed-by: NImre Deak <imre.deak@intel.com>

i915_gem_suspend() tries to access the device to ensure it is idle and
all writes from the device are flushed to memory. It assumed is already
held the runtime pm wakeref, but we should explicitly acquire it for our
access to be safe.

[  619.926287] WARNING: CPU: 3 PID: 9353 at drivers/gpu/drm/i915/intel_drv.h:1750 gen6_write32+0x23e/0x2a0 [i915]
[  619.926300] RPM wakelock ref not held during HW access
[  619.926311] Modules linked in: vgem x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec coretemp snd_hwdep crct10dif_pclmul snd_hda_core crc32_pclmul snd_pcm mei_me mei lpc_ich ghash_clmulni_intel i915(-) sdhci_pci sdhci mmc_core e1000e ptp pps_core prime_numbers [last unloaded: snd_hda_intel]
[  619.926578] CPU: 3 PID: 9353 Comm: drv_module_relo Tainted: G     U          4.10.0-CI-Trybot_609+ #1
[  619.926585] Hardware name: LENOVO 42962WU/42962WU, BIOS 8DET56WW (1.26 ) 12/01/2011
[  619.926592] Call Trace:
[  619.926609]  dump_stack+0x67/0x92
[  619.926625]  __warn+0xc6/0xe0
[  619.926640]  warn_slowpath_fmt+0x4a/0x50
[  619.926726]  gen6_write32+0x23e/0x2a0 [i915]
[  619.926801]  gen6_mm_switch+0x38/0x70 [i915]
[  619.926871]  i915_switch_context+0xec/0xa10 [i915]
[  619.926942]  i915_gem_switch_to_kernel_context+0x13c/0x2b0 [i915]
[  619.927019]  i915_gem_suspend+0x2b/0x180 [i915]
[  619.927079]  i915_driver_unload+0x22/0x200 [i915]
[  619.927093]  ? __this_cpu_preempt_check+0x13/0x20
[  619.927105]  ? trace_hardirqs_on_caller+0xe7/0x200
[  619.927118]  ? trace_hardirqs_on+0xd/0x10
[  619.927128]  ? _raw_spin_unlock_irqrestore+0x3d/0x60
[  619.927192]  i915_pci_remove+0x14/0x20 [i915]
[  619.927205]  pci_device_remove+0x34/0xb0
[  619.927219]  device_release_driver_internal+0x158/0x210
[  619.927234]  driver_detach+0x3b/0x80
[  619.927245]  bus_remove_driver+0x53/0xd0
[  619.927256]  driver_unregister+0x27/0x50
[  619.927267]  pci_unregister_driver+0x25/0xa0
[  619.927351]  i915_exit+0x1a/0xb1a [i915]
[  619.927362]  SyS_delete_module+0x193/0x1e0
[  619.927378]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  619.927386] RIP: 0033:0x7f82b46c5d37
[  619.927393] RSP: 002b:00007ffdb6f610d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
[  619.927408] RAX: ffffffffffffffda RBX: ffffffff81481ff3 RCX: 00007f82b46c5d37
[  619.927415] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 000000000224f558
[  619.927422] RBP: ffffc90001187f88 R08: 0000000000000000 R09: 00007ffdb6f61100
[  619.927428] R10: 000000000224f4e0 R11: 0000000000000246 R12: 0000000000000000
[  619.927435] R13: 00007ffdb6f612b0 R14: 0000000000000000 R15: 0000000000000000
[  619.927451]  ? __this_cpu_preempt_check+0x13/0x20

or

[  641.646590] WARNING: CPU: 1 PID: 8913 at drivers/gpu/drm/i915/intel_drv.h:1750 intel_runtime_pm_get_noresume+0x8b/0x90 [i915]
[  641.646595] RPM wakelock ref not held during HW access
[  641.646600] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec snd_hwdep crct10dif_pclmul snd_hda_core crc32_pclmul ghash_clmulni_intel snd_pcm mei_me mei i915(-) r8169 mii prime_numbers i2c_hid [last unloaded: snd_hda_intel]
[  641.646825] CPU: 1 PID: 8913 Comm: drv_module_relo Tainted: G     U          4.10.0-CI-Trybot_609+ #1
[  641.646836] Hardware name: TOSHIBA SATELLITE P50-C/06F4                            , BIOS 1.20 10/08/2015
[  641.646843] Call Trace:
[  641.646857]  dump_stack+0x67/0x92
[  641.646869]  __warn+0xc6/0xe0
[  641.646880]  warn_slowpath_fmt+0x4a/0x50
[  641.646893]  ? __this_cpu_preempt_check+0x13/0x20
[  641.646904]  ? trace_hardirqs_on_caller+0xe7/0x200
[  641.646957]  intel_runtime_pm_get_noresume+0x8b/0x90 [i915]
[  641.647022]  __i915_add_request+0x423/0x540 [i915]
[  641.647080]  i915_gem_switch_to_kernel_context+0x148/0x2b0 [i915]
[  641.647145]  i915_gem_suspend+0x2b/0x180 [i915]
[  641.647189]  i915_driver_unload+0x22/0x200 [i915]
[  641.647200]  ? __this_cpu_preempt_check+0x13/0x20
[  641.647210]  ? trace_hardirqs_on_caller+0xe7/0x200
[  641.647220]  ? trace_hardirqs_on+0xd/0x10
[  641.647231]  ? _raw_spin_unlock_irqrestore+0x3d/0x60
[  641.647276]  i915_pci_remove+0x14/0x20 [i915]
[  641.647293]  pci_device_remove+0x34/0xb0
[  641.647307]  device_release_driver_internal+0x158/0x210
[  641.647321]  driver_detach+0x3b/0x80
[  641.647330]  bus_remove_driver+0x53/0xd0
[  641.647338]  driver_unregister+0x27/0x50
[  641.647348]  pci_unregister_driver+0x25/0xa0
[  641.647415]  i915_exit+0x1a/0xb1a [i915]
[  641.647429]  SyS_delete_module+0x193/0x1e0
[  641.647444]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  641.647453] RIP: 0033:0x7fc622bd2d37
[  641.647463] RSP: 002b:00007ffff8ffb5c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
[  641.647475] RAX: ffffffffffffffda RBX: ffffffff81481ff3 RCX: 00007fc622bd2d37
[  641.647480] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000000000d49118
[  641.647485] RBP: ffffc90000997f88 R08: 0000000000000000 R09: 00007ffff8ffb5f0
[  641.647491] R10: 0000000000d490a0 R11: 0000000000000246 R12: 0000000000000000
[  641.647498] R13: 00007ffff8ffb7a0 R14: 0000000000000000 R15: 0000000000000000
[  641.647510]  ? __this_cpu_preempt_check+0x13/0x20

v2: Keep holding rpm until the end to cover i915_gem_sanitize() as well.

Fixes: 5ab57c70 ("drm/i915: Flush logical context image out to memory upon suspend")
Fixes: 1c777c5d ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170302083029.19576-1-chris@chris-wilson.co.ukReviewed-by: NImre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+

Commit 62b69566 ("drm/i915: Only enable DDI IO power domains after
enabling DPLL") changed how the DDI IO power domains get enabled, but
neglected the need to enable those domains when enabling a DP connector
with MST enabled, leading to

    Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler

Fixes: 62b69566 ("drm/i915: Only enable DDI IO power domains after enabling DPLL")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301141318.3607-2-ander.conselvan.de.oliveira@intel.com

The spam of every context initialisation saying the same thing is annoying
me! Move the information to the setup of the engine.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301121131.11588-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Reintroduce a lock around tiling vs framebuffer creation to prevent
modification of the obj->tiling_and_stride whilst the framebuffer is
being created. Rather than use struct_mutex once again, use the
per-object lock - this will also be required in future to prevent
changing the tiling whilst submitting rendering.
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 24dbf51a ("drm/i915: struct_mutex is not required for allocating the framebuffer")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301154128.2841-2-chris@chris-wilson.co.uk

No more direct return -EINVAL as we have to unwind the
obj->framebuffer_references.

Fixes: 24dbf51a ("drm/i915: struct_mutex is not required for allocating the framebuffer")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170301154128.2841-1-chris@chris-wilson.co.uk

For v3 VBTs in vid-mode the delays are part of the VBT sequences, so
we should not also delay ourselves otherwise we get double delays.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-11-git-send-email-jani.nikula@intel.com

According to the spec we should call MIPI_SEQ_TEAR_ON and DISPLAY_ON
on enable for cmd-mode, just like we already call their counterparts
on disable. Note: untested, my panel is a vid-mode panel.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-10-git-send-email-jani.nikula@intel.com

For v3+ VBTs we should call MIPI_SEQ_TEAR_OFF before MIPI_SEQ_DISPLAY_OFF,
v2 VBTs do not have MIPI_SEQ_TEAR_OFF so there this is a nop.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-9-git-send-email-jani.nikula@intel.com

According to the spec for v2 VBTs we should call MIPI_SEQ_DISPLAY_OFF
before sending SHUTDOWN, where as for v3 VBTs we should send SHUTDOWN
first.

Since the v2 order has known issues, we use the v3 order everywhere,
add a comment documenting this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-8-git-send-email-jani.nikula@intel.com

Execute the MIPI_SEQ_BACKLIGHT_ON/OFF VBT sequences at the same time as
we call intel_panel_enable_backlight() / intel_panel_disable_backlight().
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-7-git-send-email-jani.nikula@intel.com

Execute MIPI_SEQ_DEASSERT_RESET before putting the device in ready
state (LP-11), this is the sequence in which things should be done
according to the spec.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-6-git-send-email-jani.nikula@intel.com