提交 · 7e9b3f95d64165f37c6448fe624d835c5adf17b9 · openeuler / Kernel

28 10月, 2016 13 次提交

drm/i915: Remove two invalid warns · 7e9b3f95

由 Tvrtko Ursulin 提交于 10月 25, 2016

Objects can have multiple VMAs used for display in which
case assertion that objects must not be pinned for display
more times than the current VMA is incorrect.

v2: Commit message update. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 058d88c4 ("drm/i915: Track pinned VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 3299e7e4)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

7e9b3f95

drm/i915: Rotated view does not need a fence · 6d9deb91

由 Tvrtko Ursulin 提交于 10月 25, 2016

We do not need to set up a fence for the rotated view.

Display does not need it and no one can access it.

v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 05a20d09 ("drm/i915: Move map-and-fenceable tracking to the VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 07ee2bce)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

6d9deb91

drm/i915/fbc: fix CFB size calculation for gen8+ · e3b9e6e3

由 Paulo Zanoni 提交于 10月 21, 2016

Broadwell and newer actually compress up to 2560 lines instead of 2048
(as documented in the FBC_CTL page). If we don't take this into
consideration we end up reserving too little stolen memory for the
CFB, so we may allocate something else (such as a ring) right after
what we reserved, and the hardware will overwrite it with the contents
of the CFB when FBC is active, causing GPU hangs. Another possibility
is that the CFB may be allocated at the very end of the available
space, so the CFB will overlap the reserved stolen area, leading to
FIFO underruns.

This bug has always been a problem on BDW (the only affected platform
where FBC is enabled by default), but it's much easier to reproduce
since the following commit:
    commit c58b735f
    Author: Chris Wilson <chris@chris-wilson.co.uk>
    Date:   Thu Aug 18 17:16:57 2016 +0100
        drm/i915: Allocate rings from stolen

Of course, you can only reproduce the bug if your screen is taller
than 2048 lines.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213
Fixes: a98ee793 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 79f2624b)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

e3b9e6e3

drm: i915: Wait for fences on new fb, not old · 1fb3672e

由 Daniel Stone 提交于 10月 21, 2016

The previous code would wait for fences on the framebuffer from the old
plane state to complete, rather than the new, so you would see tearing
everywhere. Fix this to wait on the new state before we make it active.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Fixes: 94f05024 ("drm/i915: nonblocking commit")
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com
(cherry picked from commit 2d2c5ad8)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

1fb3672e

drm/i915: Clean up DDI DDC/AUX CH sanitation · 0ce140d4

由 Ville Syrjälä 提交于 10月 11, 2016

Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.

v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin

Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: NMaarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2)
(cherry picked from commit 9454fa87)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

0ce140d4

drm/i915: Respect alternate_aux_channel for all DDI ports · 198c5ee3

由 Ville Syrjälä 提交于 10月 11, 2016

The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.

For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.

v2: Drop whitespace changes, keep MISSING_CASE() for unknown
    aux ch assignment, include a commit message, include debug
    message during init

Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: NMaarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NJim Bride <jim.bride@linux.intel.com>
(cherry picked from commit 8f7ce038)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

198c5ee3

drm/i915/gen9: fix watermarks when using the pipe scaler · 5e33791e

由 Paulo Zanoni 提交于 10月 07, 2016

Luckily, the necessary adjustments for when we're using the scaler are
exactly the same as the ones needed on ILK+, so just reuse the
function we already have.

v2: Invert the patch order so stable backports get easier.

Cc: stable@vger.kernel.org
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit cfd7e3a2)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

5e33791e

drm/i915: Fix mismatched INIT power domain disabling during suspend · fd58753e

由 Imre Deak 提交于 10月 13, 2016

Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.

Fixes: 85e90679 ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 4c494a57)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

fd58753e

drm/i915: fix a read size argument · be4dd651

由 Dan Carpenter 提交于 10月 13, 2016

We want to read 3 bytes here, but because the parenthesis are in the
wrong place we instead read:

	sizeof(intel_dp->edp_dpcd) == sizeof(intel_dp->edp_dpcd)

which is one byte.

Fixes: fe5a66f9 ("drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP")
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161013085508.GJ16198@mwanda
(cherry picked from commit f7170e2e)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

be4dd651

drm/i915: Use fence_write() from rpm resume · 47ed3248

由 Chris Wilson 提交于 10月 12, 2016

During rpm resume we restore the fences, but we do not have the
protection of struct_mutex. This rules out updating the activity
tracking on the fences, and requires us to rely on the rpm as the
serialisation barrier instead.

[  350.298052] [drm:intel_runtime_resume [i915]] Resuming device
[  350.308606]
[  350.310520] ===============================
[  350.315560] [ INFO: suspicious RCU usage. ]
[  350.320554] 4.8.0-rc8-bsw-rapl+ #3133 Tainted: G     U  W
[  350.327208] -------------------------------
[  350.331977] ../drivers/gpu/drm/i915/i915_gem_request.h:371 suspicious rcu_dereference_protected() usage!
[  350.342619]
[  350.342619] other info that might help us debug this:
[  350.342619]
[  350.351593]
[  350.351593] rcu_scheduler_active = 1, debug_locks = 0
[  350.358952] 3 locks held by Xorg/320:
[  350.363077]  #0:  (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffffa030589c>] drm_modeset_lock_all+0x3c/0xd0 [drm]
[  350.375162]  #1:  (crtc_ww_class_acquire){+.+.+.}, at: [<ffffffffa03058a6>] drm_modeset_lock_all+0x46/0xd0 [drm]
[  350.387022]  #2:  (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffffa0305056>] drm_modeset_lock+0x36/0x110 [drm]
[  350.398236]
[  350.398236] stack backtrace:
[  350.403196] CPU: 1 PID: 320 Comm: Xorg Tainted: G     U  W       4.8.0-rc8-bsw-rapl+ #3133
[  350.412457] Hardware name: Intel Corporation CHERRYVIEW C0 PLATFORM/Braswell CRB, BIOS BRAS.X64.X088.R00.1510270350 10/27/2015
[  350.425212]  0000000000000000 ffff8801680a78c8 ffffffff81332187 ffff88016c5c5000
[  350.433611]  0000000000000001 ffff8801680a78f8 ffffffff810ca6da ffff88016cc8b0f0
[  350.442012]  ffff88016cc80000 ffff88016cc80000 ffff880177ad0000 ffff8801680a7948
[  350.450409] Call Trace:
[  350.453165]  [<ffffffff81332187>] dump_stack+0x67/0x90
[  350.458931]  [<ffffffff810ca6da>] lockdep_rcu_suspicious+0xea/0x120
[  350.466002]  [<ffffffffa039e8dd>] fence_update+0xbd/0x670 [i915]
[  350.472766]  [<ffffffffa039efe2>] i915_gem_restore_fences+0x52/0x70 [i915]
[  350.480496]  [<ffffffffa0368f42>] vlv_resume_prepare+0x72/0x570 [i915]
[  350.487839]  [<ffffffffa0369802>] intel_runtime_resume+0x102/0x210 [i915]
[  350.495442]  [<ffffffff8137f26f>] pci_pm_runtime_resume+0x7f/0xb0
[  350.502274]  [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40
[  350.509883]  [<ffffffff814401c5>] __rpm_callback+0x35/0x70
[  350.516037]  [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40
[  350.523646]  [<ffffffff81440224>] rpm_callback+0x24/0x80
[  350.529604]  [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40
[  350.537212]  [<ffffffff814417bd>] rpm_resume+0x4ad/0x740
[  350.543161]  [<ffffffff81441aa1>] __pm_runtime_resume+0x51/0x80
[  350.549824]  [<ffffffffa03889c8>] intel_runtime_pm_get+0x28/0x90 [i915]
[  350.557265]  [<ffffffffa0388a53>] intel_display_power_get+0x23/0x50 [i915]
[  350.565001]  [<ffffffffa03ef23d>] intel_atomic_commit_tail+0xdfd/0x10b0 [i915]
[  350.573106]  [<ffffffffa034b2e9>] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper]
[  350.582659]  [<ffffffff81615091>] ? _raw_spin_unlock+0x31/0x50
[  350.589205]  [<ffffffffa034b2e9>] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper]
[  350.598787]  [<ffffffffa03ef8a5>] intel_atomic_commit+0x3b5/0x500 [i915]
[  350.606319]  [<ffffffffa03061dc>] ? drm_atomic_set_crtc_for_connector+0xcc/0x100 [drm]
[  350.615209]  [<ffffffffa0306b49>] drm_atomic_commit+0x49/0x50 [drm]
[  350.622242]  [<ffffffffa034dee8>] drm_atomic_helper_set_config+0x88/0xc0 [drm_kms_helper]
[  350.631419]  [<ffffffffa02f94ac>] drm_mode_set_config_internal+0x6c/0x120 [drm]
[  350.639623]  [<ffffffffa02fa94c>] drm_mode_setcrtc+0x22c/0x4d0 [drm]
[  350.646760]  [<ffffffffa02f0f19>] drm_ioctl+0x209/0x460 [drm]
[  350.653217]  [<ffffffffa02fa720>] ? drm_mode_getcrtc+0x150/0x150 [drm]
[  350.660536]  [<ffffffff810c984a>] ? __lock_is_held+0x4a/0x70
[  350.666885]  [<ffffffff81202303>] do_vfs_ioctl+0x93/0x6b0
[  350.672939]  [<ffffffff8120f843>] ? __fget+0x113/0x200
[  350.678797]  [<ffffffff8120f735>] ? __fget+0x5/0x200
[  350.684361]  [<ffffffff81202964>] SyS_ioctl+0x44/0x80
[  350.690030]  [<ffffffff81001deb>] do_syscall_64+0x5b/0x120
[  350.696184]  [<ffffffff81615ada>] entry_SYSCALL64_slow_path+0x25/0x25

Note we also have to remember the lesson from commit 4fc788f5
("drm/i915: Flush delayed fence releases after reset") where we have to
flush any changes to the fence on restore.

v2: Replace call to release user mmaps with an assertion that they have
already been zapped.

Fixes: 49ef5294 ("drm/i915: Move fence tracking from object to vma")
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161012114827.17031-1-chris@chris-wilson.co.uk
(cherry picked from commit 4676dc83)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

47ed3248

drm/i915/gen9: fix DDB partitioning for multi-screen cases · 01c72d6c

由 Paulo Zanoni 提交于 10月 04, 2016

With the previous code we were only recomputing the DDB partitioning
for the CRTCs included in the atomic commit, so any other active CRTCs
would end up having their DDB registers zeroed. In this patch we make
sure that the computed state starts as a copy of the current
partitioning, and then we only zero the DDBs that we're actually
going to recompute.

How to reproduce the bug:
  1 - Enable the primary plane on pipe A
  2 - Enable the primary plane on pipe B
  3 - Enable the cursor or sprite plane on pipe A

Step 3 will zero the DDB partitioning for pipe B since it's not
included in the commit that enabled the cursor or sprite for pipe A.

I expect this to fix many FIFO underrun problems on gen9+.

v2:
  - Mention the cursor on the steps to reproduce the problem (Paulo).
  - Add Testcase tag provided by Maarten (Maarten).

Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596
Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes
Cc: stable@vger.kernel.org
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 5a920b85)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

01c72d6c

drm/i915: workaround sparse warning on variable length arrays · 7a0e17bd

由 Jani Nikula 提交于 10月 04, 2016

Fix sparse warning:

drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable
length array is used.

In truth the array does have constant length, but sparse is too dumb to
realize. This is a bit ugly, but silence the warning no matter what.

Fixes: 91bedd34 ("drm/i915/bdw: Check for slice, subslice and EU count for BDW")
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit ff64aa1e)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

7a0e17bd

drm/i915: keep declarations in i915_drv.h · 9cccc76b

由 Jani Nikula 提交于 9月 15, 2016

Fix sparse warnings:

drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol
'i915_driver_load' was not declared. Should it be static?

drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol
'i915_driver_unload' was not declared. Should it be static?

drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops'
was not declared. Should it be static?

Fixes: 42f5551d ("drm/i915: Split out the PCI driver interface to i915_pci.c")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com
(cherry picked from commit efab0698)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

9cccc76b

19 10月, 2016 1 次提交

mm: replace get_user_pages_remote() write/force parameters with gup_flags · 9beae1ea

由 Lorenzo Stoakes 提交于 10月 13, 2016

This removes the 'write' and 'force' from get_user_pages_remote() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

9beae1ea

10 10月, 2016 26 次提交

drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next · 105f1a65

由 Chris Wilson 提交于 10月 10, 2016

The conflict resolution of v4.8-rc8 backmerge to drm-next pulled back in
a few lines of dead code due to the code movement around
i915_gem_reset(), fix that up.

Fixes: ca09fb9f ("Merge tag 'v4.8-rc8' into drm-next")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161010125017.23911-1-chris@chris-wilson.co.uk

105f1a65

drm/i915/guc: Unwind GuC workqueue reservation if request construction fails · 449f6615

由 Chris Wilson 提交于 10月 07, 2016

We reserve space in the GuC workqueue for submitting the request in the
future. However, if we fail to construct the request, we need to give
that reserved space back to the system.

Fixes: dadd481b ("drm/i915/guc: Prepare for nonblocking execbuf submission")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97978Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-4-chris@chris-wilson.co.uk
(cherry picked from commit 5ba89908)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

449f6615

drm/i915: Reset the breadcrumbs IRQ more carefully · 61a05870

由 Chris Wilson 提交于 10月 07, 2016

Along with the interrupt, we want to restore the fake-irq and
wait-timeout detection. If we use the breadcrumbs interface to setup the
interrupt as it wants, the auxiliary timers will also be restored.

v2: Cancel both timers as well, sanitize the IMR.

Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-3-chris@chris-wilson.co.uk
(cherry picked from commit ad07dfcd)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

61a05870

drm/i915: Force relocations via cpu if we run out of idle aperture · c92fa4fe

由 Chris Wilson 提交于 10月 07, 2016

If we run out of enough aperture space to fit the entire object, we
fallback to trying to insert a single page. However, if that also fails,
we currently fail to userspace with an unexpected ENOSPC. (ENOSPC means
to userspace that their batch could not be fitted within the GTT.) Prior
to commit e8cb909a ("drm/i915: Fallback to single page GTT
mmappings for relocations") the approach is to fallback to using the
slow CPU relocation path in case of iomapping failure, and that is the
behaviour we need to restore.

Fixes: e8cb909a ("drm/i915: Fallback to single page GTT mmappings...")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98101Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-2-chris@chris-wilson.co.uk
(cherry picked from commit d7f76335)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

c92fa4fe

drm/i915: Distinguish last emitted request from last submitted request · 9b05a609

由 Chris Wilson 提交于 10月 07, 2016

In order not to trigger hangcheck on a idle-but-waiting engine, we need
to distinguish between the pending request queue and the actual
execution queue. This is done later in "drm/i915: Enable multiple
timelines" but for now we need a temporary fix to prevent blaming the
wrong engine for a GPU hang.

(Note that this causes a temporary subtle change in how we decide when
to allow a waitboost to be re-awarded back to the waiter, the temporary
effect is that if the wait is upon the most current execution the wait
is given for free, instead of checking to see if the client stalled
itself. This will be repaired in "drm/i915: Enable multiple timelines".)

Fixes: 0a046a0e ("drm/i915: Nonblocking request submission")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98104Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-1-chris@chris-wilson.co.uk
(cherry picked from commit 8687b3ec)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

9b05a609

drm/i915: Allow DP to work w/o EDID · 16c83fad

由 Ville Syrjälä 提交于 10月 03, 2016

Allow returning "connected" or "unknown" connector status for DP branch
devices that don't have an EDID. Currently we'd claim the thing as
"disconnected" if there is no EDID.

This stuff used to broken already, I think, but it got more broken by
commit f21a2198 ("drm/i915: Splitting intel_dp_detect")

Cc: Damien Cassou <damien@cassou.me>
Cc: freedesktop.org@gp.mailgun.org
Cc: Arno <blouin.arno@gmail.com>
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: NArno <blouin.arno@gmail.com>
Fixes: f21a2198 ("drm/i915: Splitting intel_dp_detect")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 5cb651a7)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

16c83fad

drm/i915: Move long hpd handling into the hotplug work · 10158116

由 Ville Syrjälä 提交于 10月 03, 2016

We can't rely on connector->status in the detect() hook if the long hpd
was already handled by the dig_port_work as that won't update
connector->status. Thus we have to defer the long hpd handling entirely
until the hotplug work runs to avoid the double long hpd handling
the "detect_done" flag is trying to prevent.

We'll start to depend on connector->status being up to date in a
following patch.

Cc: Damien Cassou <damien@cassou.me>
Cc: freedesktop.org@gp.mailgun.org
Cc: Arno <blouin.arno@gmail.com>
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: NArno <blouin.arno@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 27d4efc5)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

10158116

drm/i915/execlists: Reinitialise context image after GPU hang · c79d7303

由 Chris Wilson 提交于 10月 04, 2016

On Braswell, at least, we observe that the context image is written in
multiple phases. The first phase is to clear the register state, and
subsequently rewrite it. A GPU reset at the right moment can interrupt
the context update leaving it corrupt, and our update of the RING_HEAD
is not sufficient to restart the engine afterwards. To recover, we need
to reset the registers back to their original values. The context state
is lost. What we need is a better mechanism to serialise the reset with
pending flushes from the GPU.

Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-2-chris@chris-wilson.co.uk
(cherry picked from commit a3aabe86)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

c79d7303

drm/i915: Use correct index for backtracking HUNG semaphores · 27399eee

由 Chris Wilson 提交于 10月 03, 2016

When decoding the semaphores inside hangcheck, we need to use the hw-id
and not the local array index.

Fixes: de1add36 ("drm/i915: Decouple execbuf uAPI ...")
Testcase: igt/gem_exec_whisper/hang # gen6-7
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-3-chris@chris-wilson.co.uk
(cherry picked from commit 348b9b11)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

27399eee

drm/i915: Unalias obj->phys_handle and obj->userptr · ca5732c5

由 Chris Wilson 提交于 10月 03, 2016

We use obj->phys_handle to choose the pread/pwrite path, but as
obj->phys_handle is a union with obj->userptr, we then mistakenly use
the phys_handle path for userptr objects within pread/pwrite.

Testcase: igt/gem_userptr_blits/forbidden-operations
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97519Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-2-chris@chris-wilson.co.uk
(cherry picked from commit 5f12b80a)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

ca5732c5

drm/i915: Just clear the mmiodebug before a register access · f856f847

由 Chris Wilson 提交于 10月 03, 2016

When we enable the per-register access mmiodebug, it is to detect which
access is illegal. Reporting on earlier untraced access outside of the
mmiodebug does not help debugging (as the suspicion is immediately put
upon the current register which is not at fault)!

References: https://bugs.freedesktop.org/show_bug.cgi?id=97985Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-1-chris@chris-wilson.co.uk
(cherry picked from commit dda96033)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

f856f847

drm/i915/gen9: only add the planes actually affected by ddb changes · be5c571b

由 Paulo Zanoni 提交于 9月 29, 2016

We were previously adding all the planes owned by the CRTC even when
the ddb partitioning didn't change for them. As a consequence, a lot
of functions were being called when we were just moving the cursor
around the screen, such as skylake_update_primary_plane().

This was causing flickering on the primary plane when moving the
cursor. I'm not 100% sure which operation caused the flickering, but
we were writing to a lot of registers, so it could be any of these
writes. With this patch, just moving the mouse won't add the primary
plane to the commit since it won't trigger a change in DDB
partitioning.

v2: Use skl_ddb_entry_equal() (Lyude).
v3: Change Reported-and-bisected-by: to Reported-by: for checkpatch

Fixes: 05a76d3d ("drm/i915/skl: Ensure pipes with changed wms get added to the state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888
Cc: Mike Lothian <mike@fireburn.co.uk>
Cc: stable@vger.kernel.org
Reported-by: NMike Lothian <mike@fireburn.co.uk>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NLyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475177808-29955-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 7f60e200)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

be5c571b

drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED · a3fd4c67

由 Ville Syrjälä 提交于 9月 26, 2016

DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it
forbidden to set it for LVDS/CRT as well. So let's also set it on
CRT to make it possible to share the DPLL between HDMI and CRT.

What that bit apparently does is enable the x5 clock to the port,
which then pumps out the bits on both edges of the clock. The DAC
doesn't need that clock since it's not pumping out bits, but I don't
think it hurts to have the DPLL output that clock anyway.

This is fairly important on IVB since it has only two DPLLs with three
pipes. So trying to drive three or more PCH ports with three pipes
is only possible when at least one of the DPLLs gets shared between
two of the pipes.

SNB doesn't really need to do this since it has only two pipes. It could
be done to avoid enabling the second DPLL at all in certain cases, but
I'm not sure that's such a huge win. So let's not do it for SNB, at
least for now. On ILK it never makes sense as the DPLLs can't be shared.

v2: Just always enable the high speed clock to keep things simple (Daniel)
Beef up the commit message a bit (Daniel)

Cc: Nick Yamane <nick.diego@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Tested-by: NNick Yamane <nick.diego@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97204Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474878646-17711-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 7d7f8633)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

a3fd4c67

drm/i915/bxt: Fix HDMI DPLL configuration · 9bf9675c

由 Imre Deak 提交于 9月 26, 2016

a277ca7d should've been a no-functional-change commit, but it
removed the initialization of the dpll_hw_state for HDMI outputs,
resulting in state mismatches and a failed modeset with blank
screen. Fix this by reinstating the dpll_hw_state initialization.

v2:
- Make bxt_ddi_hdmi_set_dpll_hw_state() static.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: a277ca7d ("drm/i915: Split bxt_ddi_pll_select()")
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474901671-22719-1-git-send-email-imre.deak@intel.com
(cherry picked from commit a04139c4)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

9bf9675c

drm/i915/gen9: fix the watermark res_blocks value · 73fed0ef