Objects can have multiple VMAs used for display in which
case assertion that objects must not be pinned for display
more times than the current VMA is incorrect.

v2: Commit message update. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 058d88c4 ("drm/i915: Track pinned VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 3299e7e4)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We do not need to set up a fence for the rotated view.

Display does not need it and no one can access it.

v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 05a20d09 ("drm/i915: Move map-and-fenceable tracking to the VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 07ee2bce)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Broadwell and newer actually compress up to 2560 lines instead of 2048
(as documented in the FBC_CTL page). If we don't take this into
consideration we end up reserving too little stolen memory for the
CFB, so we may allocate something else (such as a ring) right after
what we reserved, and the hardware will overwrite it with the contents
of the CFB when FBC is active, causing GPU hangs. Another possibility
is that the CFB may be allocated at the very end of the available
space, so the CFB will overlap the reserved stolen area, leading to
FIFO underruns.

This bug has always been a problem on BDW (the only affected platform
where FBC is enabled by default), but it's much easier to reproduce
since the following commit:
    commit c58b735f
    Author: Chris Wilson <chris@chris-wilson.co.uk>
    Date:   Thu Aug 18 17:16:57 2016 +0100
        drm/i915: Allocate rings from stolen

Of course, you can only reproduce the bug if your screen is taller
than 2048 lines.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213
Fixes: a98ee793 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 79f2624b)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The previous code would wait for fences on the framebuffer from the old
plane state to complete, rather than the new, so you would see tearing
everywhere. Fix this to wait on the new state before we make it active.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Fixes: 94f05024 ("drm/i915: nonblocking commit")
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com
(cherry picked from commit 2d2c5ad8)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.

v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin

Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: NMaarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2)
(cherry picked from commit 9454fa87)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.

For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.

v2: Drop whitespace changes, keep MISSING_CASE() for unknown
    aux ch assignment, include a commit message, include debug
    message during init

Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: NMaarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NJim Bride <jim.bride@linux.intel.com>
(cherry picked from commit 8f7ce038)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Luckily, the necessary adjustments for when we're using the scaler are
exactly the same as the ones needed on ILK+, so just reuse the
function we already have.

v2: Invert the patch order so stable backports get easier.

Cc: stable@vger.kernel.org
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit cfd7e3a2)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.

Fixes: 85e90679 ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 4c494a57)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We want to read 3 bytes here, but because the parenthesis are in the
wrong place we instead read:

	sizeof(intel_dp->edp_dpcd) == sizeof(intel_dp->edp_dpcd)

which is one byte.

Fixes: fe5a66f9 ("drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP")
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161013085508.GJ16198@mwanda
(cherry picked from commit f7170e2e)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

During rpm resume we restore the fences, but we do not have the
protection of struct_mutex. This rules out updating the activity
tracking on the fences, and requires us to rely on the rpm as the
serialisation barrier instead.

[  350.298052] [drm:intel_runtime_resume [i915]] Resuming device
[  350.308606]
[  350.310520] ===============================
[  350.315560] [ INFO: suspicious RCU usage. ]
[  350.320554] 4.8.0-rc8-bsw-rapl+ #3133 Tainted: G     U  W
[  350.327208] -------------------------------
[  350.331977] ../drivers/gpu/drm/i915/i915_gem_request.h:371 suspicious rcu_dereference_protected() usage!
[  350.342619]
[  350.342619] other info that might help us debug this:
[  350.342619]
[  350.351593]
[  350.351593] rcu_scheduler_active = 1, debug_locks = 0
[  350.358952] 3 locks held by Xorg/320:
[  350.363077]  #0:  (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffffa030589c>] drm_modeset_lock_all+0x3c/0xd0 [drm]
[  350.375162]  #1:  (crtc_ww_class_acquire){+.+.+.}, at: [<ffffffffa03058a6>] drm_modeset_lock_all+0x46/0xd0 [drm]
[  350.387022]  #2:  (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffffa0305056>] drm_modeset_lock+0x36/0x110 [drm]
[  350.398236]
[  350.398236] stack backtrace:
[  350.403196] CPU: 1 PID: 320 Comm: Xorg Tainted: G     U  W       4.8.0-rc8-bsw-rapl+ #3133
[  350.412457] Hardware name: Intel Corporation CHERRYVIEW C0 PLATFORM/Braswell CRB, BIOS BRAS.X64.X088.R00.1510270350 10/27/2015
[  350.425212]  0000000000000000 ffff8801680a78c8 ffffffff81332187 ffff88016c5c5000
[  350.433611]  0000000000000001 ffff8801680a78f8 ffffffff810ca6da ffff88016cc8b0f0
[  350.442012]  ffff88016cc80000 ffff88016cc80000 ffff880177ad0000 ffff8801680a7948
[  350.450409] Call Trace:
[  350.453165]  [<ffffffff81332187>] dump_stack+0x67/0x90
[  350.458931]  [<ffffffff810ca6da>] lockdep_rcu_suspicious+0xea/0x120
[  350.466002]  [<ffffffffa039e8dd>] fence_update+0xbd/0x670 [i915]
[  350.472766]  [<ffffffffa039efe2>] i915_gem_restore_fences+0x52/0x70 [i915]
[  350.480496]  [<ffffffffa0368f42>] vlv_resume_prepare+0x72/0x570 [i915]
[  350.487839]  [<ffffffffa0369802>] intel_runtime_resume+0x102/0x210 [i915]
[  350.495442]  [<ffffffff8137f26f>] pci_pm_runtime_resume+0x7f/0xb0
[  350.502274]  [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40
[  350.509883]  [<ffffffff814401c5>] __rpm_callback+0x35/0x70
[  350.516037]  [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40
[  350.523646]  [<ffffffff81440224>] rpm_callback+0x24/0x80
[  350.529604]  [<ffffffff8137f1f0>] ? pci_restore_standard_config+0x40/0x40
[  350.537212]  [<ffffffff814417bd>] rpm_resume+0x4ad/0x740
[  350.543161]  [<ffffffff81441aa1>] __pm_runtime_resume+0x51/0x80
[  350.549824]  [<ffffffffa03889c8>] intel_runtime_pm_get+0x28/0x90 [i915]
[  350.557265]  [<ffffffffa0388a53>] intel_display_power_get+0x23/0x50 [i915]
[  350.565001]  [<ffffffffa03ef23d>] intel_atomic_commit_tail+0xdfd/0x10b0 [i915]
[  350.573106]  [<ffffffffa034b2e9>] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper]
[  350.582659]  [<ffffffff81615091>] ? _raw_spin_unlock+0x31/0x50
[  350.589205]  [<ffffffffa034b2e9>] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper]
[  350.598787]  [<ffffffffa03ef8a5>] intel_atomic_commit+0x3b5/0x500 [i915]
[  350.606319]  [<ffffffffa03061dc>] ? drm_atomic_set_crtc_for_connector+0xcc/0x100 [drm]
[  350.615209]  [<ffffffffa0306b49>] drm_atomic_commit+0x49/0x50 [drm]
[  350.622242]  [<ffffffffa034dee8>] drm_atomic_helper_set_config+0x88/0xc0 [drm_kms_helper]
[  350.631419]  [<ffffffffa02f94ac>] drm_mode_set_config_internal+0x6c/0x120 [drm]
[  350.639623]  [<ffffffffa02fa94c>] drm_mode_setcrtc+0x22c/0x4d0 [drm]
[  350.646760]  [<ffffffffa02f0f19>] drm_ioctl+0x209/0x460 [drm]
[  350.653217]  [<ffffffffa02fa720>] ? drm_mode_getcrtc+0x150/0x150 [drm]
[  350.660536]  [<ffffffff810c984a>] ? __lock_is_held+0x4a/0x70
[  350.666885]  [<ffffffff81202303>] do_vfs_ioctl+0x93/0x6b0
[  350.672939]  [<ffffffff8120f843>] ? __fget+0x113/0x200
[  350.678797]  [<ffffffff8120f735>] ? __fget+0x5/0x200
[  350.684361]  [<ffffffff81202964>] SyS_ioctl+0x44/0x80
[  350.690030]  [<ffffffff81001deb>] do_syscall_64+0x5b/0x120
[  350.696184]  [<ffffffff81615ada>] entry_SYSCALL64_slow_path+0x25/0x25

Note we also have to remember the lesson from commit 4fc788f5
("drm/i915: Flush delayed fence releases after reset") where we have to
flush any changes to the fence on restore.

v2: Replace call to release user mmaps with an assertion that they have
already been zapped.

Fixes: 49ef5294 ("drm/i915: Move fence tracking from object to vma")
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161012114827.17031-1-chris@chris-wilson.co.uk
(cherry picked from commit 4676dc83)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

With the previous code we were only recomputing the DDB partitioning
for the CRTCs included in the atomic commit, so any other active CRTCs
would end up having their DDB registers zeroed. In this patch we make
sure that the computed state starts as a copy of the current
partitioning, and then we only zero the DDBs that we're actually
going to recompute.

How to reproduce the bug:
  1 - Enable the primary plane on pipe A
  2 - Enable the primary plane on pipe B
  3 - Enable the cursor or sprite plane on pipe A

Step 3 will zero the DDB partitioning for pipe B since it's not
included in the commit that enabled the cursor or sprite for pipe A.

I expect this to fix many FIFO underrun problems on gen9+.

v2:
  - Mention the cursor on the steps to reproduce the problem (Paulo).
  - Add Testcase tag provided by Maarten (Maarten).

Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596
Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes
Cc: stable@vger.kernel.org
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 5a920b85)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Fix sparse warning:

drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable
length array is used.

In truth the array does have constant length, but sparse is too dumb to
realize. This is a bit ugly, but silence the warning no matter what.

Fixes: 91bedd34 ("drm/i915/bdw: Check for slice, subslice and EU count for BDW")
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit ff64aa1e)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Fix sparse warnings:

drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol
'i915_driver_load' was not declared. Should it be static?

drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol
'i915_driver_unload' was not declared. Should it be static?

drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops'
was not declared. Should it be static?

Fixes: 42f5551d ("drm/i915: Split out the PCI driver interface to i915_pci.c")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com
(cherry picked from commit efab0698)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The pixel clock should not be on if the CRTC is not in use, hence
move clock enable/disable calls into CRTC callbacks.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Tested-By: NMeng Yi <meng.yi@nxp.com>

Do not schedule a transfer of mode settings early. Modes should
get applied on on CRTC enable where we also enable the pixel clock.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Tested-By: NMeng Yi <meng.yi@nxp.com>

There is no need to explicitly initiate a register transfer and
turn off the DCU after initializing the plane registers. In fact,
this is harmful and leads to unnecessary flickers if the DCU has
been left on by the bootloader.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Tested-By: NMeng Yi <meng.yi@nxp.com>

Do not use encoder disable/enable callbacks to control bypass
mode as this seems to mess with the signals not liked by
displays. This also makes more sense since the encoder is
already defined to be parallel RGB/LVDS at creation time.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Tested-By: NMeng Yi <meng.yi@nxp.com>

This removes the 'write' and 'force' from get_user_pages_remote() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.
Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes the 'write' and 'force' from get_vaddr_frames() and
replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in
callers as use of this flag can result in surprising behaviour (and
hence bugs) within the mm subsystem.
Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I was a bit over-eager in my cleanup in

commit 95c081c1
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Jun 21 10:54:12 2016 +0200

    drm: Move master pointer from drm_minor to drm_device

Noticed by Chris Wilson.

Fixes: 95c081c1 ("drm: Move master pointer from drm_minor to drm_device")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Previous code was just a copy/paste from KV.
Reviewed-by: NTom St Denis <tom.stdenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add missing functionality.
Reviewed-by: NTom St Denis <tom.stdenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise, you can't disable dpm.

Tested-by and Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

IP types are not an index.  Each asic may have number and
type of IPs.  Properly check the the type rather than
using the type id as an index.

v2: fix all the IPs to not use IP type as an idx as well.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Limit clocks on a specific HD86xx part to avoid
crashes (while awaiting an appropriate PP fix).
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

debugfs_create_file() returns NULL on error, it only returns error
pointers if debugfs isn't enabled in the config and we checked for that
earlier so it can't happen.

Fixes: 4f4824b5 ('drm/amd/amdgpu: Convert ring debugfs entries to binary')
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

variable dereferenced before check it
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add array length check to avoid buffer overflow.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ported from Rex's amdgpu change.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

UVD and VCE CG are handled specially, however the previous
fix for this skipped late init for those blocks rather than
just CG.  Just protect the CG function call.  No functional
change since UVD and VCE don't currently utilize a late_init
function.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Sometimes during multiple reboots, the system hangs
during bootup. The issue is very random and happens
once in around 50 reboots or so.

It seems if clockgating is enabled before late init,
the GFX engine sometimes does not respond.

This patch changes the ordering a little so that
both powergating and clockgating are enabled only
after late init calls.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NArindam Nath <arindam.nath@amd.com>
Tested-by: NSunil Uttarwar <Sunil.Uttarwar1@amd.com>
Reviewed-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for border colors in compute shaders.
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ensure that we really only report a GPU reset if one has happened since the
creation of the context.
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When setting up the RLC, only disable the CGCG and
CGLS bits rather than clearing the entire register
to avoid losing the golden settings.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The ordering caused problems.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=98200Reviewed-and-Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>