Preethi reported that PMTU discovery for UDP/raw applications is not
working in the presence of VRF when the socket is not bound to a device.
The problem is that ip6_sk_update_pmtu does not consider the L3 domain
of the skb device if the socket is not bound. Update the function to
set oif to the L3 master device if relevant.

Fixes: ca254490 ("net: Add VRF support to IPv6 stack")
Reported-by: NPreethi Ramachandra <preethir@juniper.net>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code for reading ancillary data from a received buffer is assuming
the buffer is linear. To make this assumption true we have to linearize
the buffer before message data is read.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We get the following warning:

[   47.926140] 32-bit node address hash set to 2010a0a
[   47.927202]
[   47.927433] ================================
[   47.928050] WARNING: inconsistent lock state
[   47.928661] 4.19.0+ #37 Tainted: G            E
[   47.929346] --------------------------------
[   47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes:
[   47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0
[   47.930116] {SOFTIRQ-ON-W} state was registered at:
[   47.930116]   _raw_spin_lock+0x29/0x60
[   47.930116]   rht_deferred_worker+0x556/0x810
[   47.930116]   process_one_work+0x1f5/0x540
[   47.930116]   worker_thread+0x64/0x3e0
[   47.930116]   kthread+0x112/0x150
[   47.930116]   ret_from_fork+0x3a/0x50
[   47.930116] irq event stamp: 14044
[   47.930116] hardirqs last  enabled at (14044): [<ffffffff9a07fbba>] __local_bh_enable_ip+0x7a/0xf0
[   47.938117] hardirqs last disabled at (14043): [<ffffffff9a07fb81>] __local_bh_enable_ip+0x41/0xf0
[   47.938117] softirqs last  enabled at (14028): [<ffffffff9a0803ee>] irq_enter+0x5e/0x60
[   47.938117] softirqs last disabled at (14029): [<ffffffff9a0804a5>] irq_exit+0xb5/0xc0
[   47.938117]
[   47.938117] other info that might help us debug this:
[   47.938117]  Possible unsafe locking scenario:
[   47.938117]
[   47.938117]        CPU0
[   47.938117]        ----
[   47.938117]   lock(&(&ht->lock)->rlock);
[   47.938117]   <Interrupt>
[   47.938117]     lock(&(&ht->lock)->rlock);
[   47.938117]
[   47.938117]  *** DEADLOCK ***
[   47.938117]
[   47.938117] 2 locks held by swapper/3/0:
[   47.938117]  #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280
[   47.938117]  #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc]
[   47.938117]
[   47.938117] stack backtrace:
[   47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G            E     4.19.0+ #37
[   47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   47.938117] Call Trace:
[   47.938117]  <IRQ>
[   47.938117]  dump_stack+0x5e/0x8b
[   47.938117]  print_usage_bug+0x1ed/0x1ff
[   47.938117]  mark_lock+0x5b5/0x630
[   47.938117]  __lock_acquire+0x4c0/0x18f0
[   47.938117]  ? lock_acquire+0xa6/0x180
[   47.938117]  lock_acquire+0xa6/0x180
[   47.938117]  ? rhashtable_walk_enter+0x36/0xb0
[   47.938117]  _raw_spin_lock+0x29/0x60
[   47.938117]  ? rhashtable_walk_enter+0x36/0xb0
[   47.938117]  rhashtable_walk_enter+0x36/0xb0
[   47.938117]  tipc_sk_reinit+0xb0/0x410 [tipc]
[   47.938117]  ? mark_held_locks+0x6f/0x90
[   47.938117]  ? __local_bh_enable_ip+0x7a/0xf0
[   47.938117]  ? lockdep_hardirqs_on+0x20/0x1a0
[   47.938117]  tipc_net_finalize+0xbf/0x180 [tipc]
[   47.938117]  tipc_disc_timeout+0x509/0x540 [tipc]
[   47.938117]  ? call_timer_fn+0x5/0x280
[   47.938117]  ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[   47.938117]  ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[   47.938117]  call_timer_fn+0xa1/0x280
[   47.938117]  ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[   47.938117]  run_timer_softirq+0x1f2/0x4d0
[   47.938117]  __do_softirq+0xfc/0x413
[   47.938117]  irq_exit+0xb5/0xc0
[   47.938117]  smp_apic_timer_interrupt+0xac/0x210
[   47.938117]  apic_timer_interrupt+0xf/0x20
[   47.938117]  </IRQ>
[   47.938117] RIP: 0010:default_idle+0x1c/0x140
[   47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b
[   47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
[   47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001
[   47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200
[   47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
[   47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[   47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200
[   47.938117]  ? default_idle+0x1a/0x140
[   47.938117]  do_idle+0x1bc/0x280
[   47.938117]  cpu_startup_entry+0x19/0x20
[   47.938117]  start_secondary+0x187/0x1c0
[   47.938117]  secondary_startup_64+0xa4/0xb0

The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is
calling the function rhashtable_walk_enter() within a timer interrupt.
We fix this by executing tipc_net_finalize() in work queue context.
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

eth_type_trans() assumes initial value for skb->pkt_type
is PACKET_HOST.

This is indeed the value right after a fresh skb allocation.

However, it is possible that GRO merged a packet with a different
value (like PACKET_OTHERHOST in case macvlan is used), so
we need to make sure napi->skb will have pkt_type set back to
PACKET_HOST.

Otherwise, valid packets might be dropped by the stack because
their pkt_type is not PACKET_HOST.

napi_reuse_skb() was added in commit 96e93eab ("gro: Add
internal interfaces for VLAN"), but this bug always has
been there.

Fixes: 96e93eab ("gro: Add internal interfaces for VLAN")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lucas Bates says:

====================
Prevent uncaught exceptions in tdc

This patch series addresses two potential bugs in tdc that can
cause exceptions to be raised in certain circumstances.  These
exceptions are generally not handled, so instead we will prevent
them from being raised.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add some defensive coding in case one of the subprocesses created by tdc
returns nothing. If no object is returned from exec_cmd, then tdc will
halt with an unhandled exception.
Signed-off-by: NBrenda J. Butler <bjb@mojatatu.com>
Signed-off-by: NLucas Bates <lucasb@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent exceptions from being raised while decoding output
from an executed command. There is no impact on tdc's
execution and the verify command phase would fail the pattern
match.
Signed-off-by: NLucas Bates <lucasb@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The various types of tunnels running over IPv4 can ask to set the DF
bit to do PMTU discovery. However, PMTU discovery is subject to the
threshold set by the net.ipv4.route.min_pmtu sysctl, and is also
disabled on routes with "mtu lock". In those cases, we shouldn't set
the DF bit.

This patch makes setting the DF bit conditional on the route's MTU
locking state.

This issue seems to be older than git history.
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We would like the existing community to be kept in the loop for any new
developments on CAKE; and I certainly plan to keep maintaining it. Reflect
this in MAINTAINERS.
Signed-off-by: NToke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Syzbot reported a use-after-free of the global vlan context on port vlan
destruction. When I added per-port vlan stats I missed the fact that the
global vlan context can be freed before the per-port vlan rcu callback.
There're a few different ways to deal with this, I've chosen to add a
new private flag that is set only when per-port stats are allocated so
we can directly check it on destruction without dereferencing the global
context at all. The new field in net_bridge_vlan uses a hole.

v2: cosmetic change, move the check to br_process_vlan_info where the
    other checks are done
v3: add change log in the patch, add private (in-kernel only) flags in a
    hole in net_bridge_vlan struct and use that instead of mixing
    user-space flags with private flags

Fixes: 9163a0fc ("net: bridge: add support for per-port vlan stats")
Reported-by: syzbot+04681da557a0e49a52e5@syzkaller.appspotmail.com
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

splice(2) fails with -EINVAL when called reading on a socket with no splice_read
set in its proto_ops (such as vsock sockets). Switch this to fallbacks to a
generic_file_splice_read instead.
Signed-off-by: NSlavomir Kaslev <kaslevs@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Up until commit 7e5fbd1e ("net: mdio-gpio: Convert to use gpiod
functions where possible"), the _cansleep variants of the gpio_ API was
used. After that commit and the change to gpiod_ API, the _cansleep()
was dropped. This then results in WARN_ON() when used with GPIO
devices which do sleep. Add back the _cansleep() to avoid this.

Fixes: 7e5fbd1e ("net: mdio-gpio: Convert to use gpiod functions where possible")
Signed-off-by: NMartin Schiller <ms@dev.tdt.de>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit dfa0d55f.

Discussion still ongoing, I shouldn't have applied this.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here are two batman-adv bugfixes:

 - Explicitly pad short ELP packets with zeros, by Sven Eckelmann

 - Fix packet size calculation when merging fragments,
   by Sven Eckelmann
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit re-enables support for slow GPIO pins. It was initially
introduced by commit 2d6c9091 ("net: mdio-gpio: support access that
may sleep") and got lost by commit 7e5fbd1e ("net: mdio-gpio:
Convert to use gpiod functions where possible").

Also add a warning about slow GPIO pins like it is done in i2c-gpio.
Signed-off-by: NMartin Schiller <ms@dev.tdt.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcf_idr_check_alloc() can return a negative value, on allocation failures
(-ENOMEM) or IDR exhaustion (-ENOSPC): don't leak keys_ex in these cases.

Fixes: 0190c1d4 ("net: sched: atomically check-allocate action")
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return 'err' in the error handling path instead of 0.
Return explicitly 0 in the normal path, instead of 'err', which is known
to be 0 at this point.

Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These is no need to hold dst before calling rt6_remove_exception_rt().
The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(),
which has been removed in Commit 93531c67 ("net/ipv6: separate
handling of FIB entries from dst based routes"). Otherwise, it will
cause a dst leak.

This patch is to simply remove the dst_hold_safe() call before calling
rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt().
It's safe, because the removal of the exception that holds its dst's
refcnt is protected by rt6_exception_lock.

Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes")
Fixes: 23fb93a4 ("net/ipv6: Cleanup exception and cache route handling")
Reported-by: NLi Shuang <shuali@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using 2.5G speed relies on the SerDes lanes being configured
accordingly. The lanes have to be reconfigured to switch between
1G and 2.5G, and for now only the bootloader does this configuration.

In the case we add a Comphy driver to handle switching the lanes
dynamically, it's better for now to stick with supporting only 1G and
add advertisement for 2.5G once we really are capable of handling both
speeds without problem.

Since the interface mode is initialy taken from the DT, we want to make
sure that adding comphy support won't break boards that don't update
their dtb.

Fixes: da58a931 ("net: mvneta: Add support for 2500Mbps SGMII")
Reported-by: NAndrew Lunn <andrew@lunn.ch>
Reported-by: NRussell King <linux@armlinux.org.uk>
Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing semicolon.

Fixes: 291d57f6 ("qed: Fix rdma_info structure allocation")
Cc: Michal Kalderon <michal.kalderon@cavium.com>
Cc: Denis Bolotin <denis.bolotin@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 fixes for 4.20-rc

This patchset includes small fixes for mlx4_core driver.

First patch by Jack zeros a field in a FW communication
command, to match the FW spec.
Please queue it to -stable >= v3.17.

In the second patch I zero-initialize a variable to silence
a compliation warning.
Please queue it to -stable >= v3.19.

Third patch by Aya replaces int fields with unsigned int,
to fix a UBSAN warning.
Please queue it to -stable >= v3.13.

Series generated against net commit:
db8ddde7 Merge branch 'qed-Miscellaneous-bug-fixes'
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative.  Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.

Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialize the uid variable to zero to avoid the compilation warning.

Fixes: 7a89399f ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When EDT conversion happened, fq lost the ability to enfore a maxrate
for all flows. It kept it for non EDT flows.

This commit restores the functionality.

Tested:

tc qd replace dev eth0 root fq maxrate 500Mbit
netperf -P0 -H host -- -O THROUGHPUT
489.75

Fixes: ab408b6d ("tcp: switch tcp and sch_fq to new earliest departure time model")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The life-checking function, which is used by kAFS to make sure that a call
is still live in the event of a pending signal, only samples the received
packet serial number counter; it doesn't actually provoke a change in the
counter, rather relying on the server to happen to give us a packet in the
time window.

Fix this by adding a function to force a ping to be transmitted.

kAFS then keeps track of whether there's been a stall, and if so, uses the
new function to ping the server, resetting the timeout to allow the reply
to come back.

If there's a stall, a ping and the call is *still* stalled in the same
place after another period, then the call will be aborted.

Fixes: bc5e3a54 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Fixes: f4d15fb6 ("rxrpc: Provide functions for allowing cleaner handling of signals")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

with CONFIG_THERMAL=m and cxgb4 as built-in build fails, and
'commit e70a57fa ("cxgb4: fix thermal configuration dependencies")'
tries to fix it but when cxgb4i is made built-in build fails again,
use IS_REACHABLE instead of IS_ENABLED to fix the issue.

Fixes: e70a57fa (cxgb4: fix thermal configuration dependencies)
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vince has moved to a different role. Replace him as Altera
TSE maintainer.
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Acked-by: NVince Bridgers <vince.bridgers@intel.com>
Acked-by: NAlan Tull <atull@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

Most of the bug fixes are related to the new 57500 chips, including some
initialization and counter fixes, disabling RDMA support, and a
workaround for occasional missing interrupts.  The last patch from
Vasundhara fixes the year/month parameters for firmware coredump.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the year and month offset while storing it in
bnxt_fill_coredump_record().

Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To keep track of the number of times the workaround code for 57500 A0
has been triggered.  This is a per NQ counter.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hardware can sometimes not generate NQ MSIX with a single pending
CP ring entry.  This seems to always happen at the last entry of
the CP ring before it wraps.  Add logic to check all the CP rings for
pending entries without the CP ring consumer index advancing.  Calling
HWRM_DBG_RING_INFO_GET to read the context of the CP ring will flush
out the NQ entry and MSIX.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no RDMA support on 57500 chips yet, so prevent bnxt_re from
registering on these chips.  There is intermittent failure if bnxt_re
is allowed to register and proceed with RDMA operations.

Fixes: 1ab968d2 ("bnxt_en: Add PCI ID for BCM57508 device.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The software counter structure is defined in both the CP ring's structure
and the NQ ring's structure on the new devices.  The legacy code adds the
counter to the CP ring's structure and the counter won't get displayed
since the ethtool code is looking at the NQ ring's structure.

Since all other counters are contained in the NQ ring's structure, it
makes more sense to count rx_l4_csum_errors in the NQ.

Fixes: 50e3ab78 ("bnxt_en: Allocate completion ring structures for 57500 series chips.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recent commit has added the reservation of RSS context.  This requires
bnxt_hwrm_vnic_qcaps() to be called before allocating any RSS contexts.
The bnxt_hwrm_vnic_qcaps() call sets up proper flags that will
determine how many RSS contexts to allocate to support NTUPLE.

This causes a regression that too many RSS contexts are being reserved
and causing resource shortage when enabling many VFs.  Fix it by calling
bnxt_hwrm_vnic_qcaps() earlier.

Fixes: 41e8d798 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.")
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This issue happens when trying to add an existent tunnel. It
doesn't call sock_put() before returning -EEXIST to release
the sock refcnt that was held by calling sock_hold() before
the existence check.

This patch is to fix it by holding the sock after doing the
existence check.

Fixes: f6cd651b ("l2tp: fix race in duplicate tunnel detection")
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Reviewed-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SMC-D stress workload showed connection stalls. Since the firmware
decides to skip raising an interrupt if the SBA DMBE mask bit is
still set, this SBA DMBE mask bit should be cleared before the
IRQ handling in the SMC code runs. Otherwise there are small windows
possible with missing interrupts for incoming data.
SMC-D currently does not care about the old value of the SBA DMBE
mask.
Acked-by: NSebastian Ott <sebott@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Denis Bolotin says:

====================
qed: Miscellaneous bug fixes

This patch series fixes several unrelated bugs across the driver.
Please consider applying to net.

V1->V2:
-------
Use dma_rmb() instead of rmb().
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The value of "sb_index" is written by the hardware. Reading its value and
writing it to "index" must finish before checking the loop condition.
Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Certain flows need to access the rdma-info structure, for example dcbx
update flows. In some cases there can be a race between the allocation or
deallocation of the structure which was done in roce start / roce stop and
an asynchrounous dcbx event that tries to access the structure.
For this reason, we move the allocation of the rdma_info structure to be
similar to the iscsi/fcoe info structures which are allocated during device
setup.
We add a new field of "active" to the struct to define whether roce has
already been started or not, and this is checked instead of whether the
pointer to the info structure.

Fixes: 51ff1725 ("qed: Add support for RoCE hw init")
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>