qed: Add support for RoCE hw init

This adds the backbone required for the various HW initalizations
which are necessary for the qedr driver - FW notification, resource
initializations, etc.
Signed-off-by: NRam Amrani <Ram.Amrani@caviumnetworks.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/Makefile

@@ -5,3 +5,4 @@ qed-y := qed_cxt.o qed_dev.o qed_hw.o qed_init_fw_funcs.o qed_init_ops.o \
 	 qed_selftest.o qed_dcbx.o qed_debug.o
 qed-$(CONFIG_QED_SRIOV) += qed_sriov.o qed_vf.o
 qed-$(CONFIG_QED_LL2) += qed_ll2.o
+qed-$(CONFIG_INFINIBAND_QEDR) += qed_roce.o

drivers/net/ethernet/qlogic/qed/qed.h

@@ -35,6 +35,9 @@ extern const struct qed_common_ops qed_common_ops_pass;
 
 #define QED_WFQ_UNIT	100
 
+#define QED_WID_SIZE            (1024)
+#define QED_PF_DEMS_SIZE        (4)
+
 /* cau states */
 enum qed_coalescing_mode {
 	QED_COAL_MODE_DISABLE,
@@ -48,6 +51,14 @@ enum qed_mcp_protocol_type;
 
 /* helpers */
 static inline u32 qed_db_addr(u32 cid, u32 DEMS)
+{
+	u32 db_addr = FIELD_VALUE(DB_LEGACY_ADDR_DEMS, DEMS) |
+		      (cid * QED_PF_DEMS_SIZE);
+
+	return db_addr;
+}
+
+static inline u32 qed_db_addr_vf(u32 cid, u32 DEMS)
 {
 	u32 db_addr = FIELD_VALUE(DB_LEGACY_ADDR_DEMS, DEMS) |
 		      FIELD_VALUE(DB_LEGACY_ADDR_ICID, cid);
@@ -152,14 +163,17 @@ enum QED_RESOURCES {
 	QED_RL,
 	QED_MAC,
 	QED_VLAN,
+	QED_RDMA_CNQ_RAM,
 	QED_ILT,
 	QED_LL2_QUEUE,
+	QED_RDMA_STATS_QUEUE,
 	QED_MAX_RESC,
 };
 
 enum QED_FEATURE {
 	QED_PF_L2_QUE,
 	QED_VF,
+	QED_RDMA_CNQ,
 	QED_MAX_FEATURES,
 };
 
@@ -364,6 +378,7 @@ struct qed_hwfn {
 	/* Protocol related */
 	bool				using_ll2;
 	struct qed_ll2_info		*p_ll2_info;
+	struct qed_rdma_info		*p_rdma_info;
 	struct qed_pf_params		pf_params;
 
 	bool b_rdma_enabled_in_prs;
@@ -402,6 +417,17 @@ struct qed_hwfn {
 
 	struct dbg_tools_data		dbg_info;
 
+	/* PWM region specific data */
+	u32				dpi_size;
+	u32				dpi_count;
+
+	/* This is used to calculate the doorbell address */
+	u32 dpi_start_offset;
+
+	/* If one of the following is set then EDPM shouldn't be used */
+	u8 dcbx_no_edpm;
+	u8 db_bar_no_edpm;
+
 	struct qed_simd_fp_handler	simd_proto_handler[64];
 
 #ifdef CONFIG_QED_SRIOV
@@ -435,6 +461,8 @@ struct qed_int_params {
 	bool			fp_initialized;
 	u8			fp_msix_base;
 	u8			fp_msix_cnt;
+	u8			rdma_msix_base;
+	u8			rdma_msix_cnt;
 };
 
 struct qed_dbg_feature {
@@ -541,7 +569,6 @@ struct qed_dev {
 
 	bool				b_is_vf;
 	u32				drv_type;
-
 	struct qed_eth_stats		*reset_stats;
 	struct qed_fw_data		*fw_data;
 
@@ -574,6 +601,10 @@ struct qed_dev {
 #endif
 
 	const struct firmware		*firmware;
+
+	u32 rdma_max_sge;
+	u32 rdma_max_inline;
+	u32 rdma_max_srq_sge;
 };
 
 #define NUM_OF_VFS(dev)         MAX_NUM_VFS_BB

drivers/net/ethernet/qlogic/qed/qed_cxt.c

@@ -48,7 +48,13 @@
 #define TM_ELEM_SIZE    4
 
 /* ILT constants */
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+/* For RoCE we configure to 64K to cover for RoCE max tasks 256K purpose. */
+#define ILT_DEFAULT_HW_P_SIZE		4
+#else
 #define ILT_DEFAULT_HW_P_SIZE		3
+#endif
+
 #define ILT_PAGE_IN_BYTES(hw_p_size)	(1U << ((hw_p_size) + 12))
 #define ILT_CFG_REG(cli, reg)	PSWRQ2_REG_ ## cli ## _ ## reg ## _RT_OFFSET
 

drivers/net/ethernet/qlogic/qed/qed_cxt.h

@@ -170,6 +170,12 @@ int qed_qm_reconf(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
  */
 void qed_cxt_release_cid(struct qed_hwfn *p_hwfn,
 			 u32 cid);
+int qed_cxt_dynamic_ilt_alloc(struct qed_hwfn *p_hwfn,
+			      enum qed_cxt_elem_type elem_type, u32 iid);
+u32 qed_cxt_get_proto_tid_count(struct qed_hwfn *p_hwfn,
+				enum protocol_type type);
+u32 qed_cxt_get_proto_cid_start(struct qed_hwfn *p_hwfn,
+				enum protocol_type type);
 
 #define QED_CTX_WORKING_MEM 0
 #define QED_CTX_FL_MEM 1

drivers/net/ethernet/qlogic/qed/qed_dev.c

@@ -35,9 +35,13 @@
 #include "qed_sp.h"
 #include "qed_sriov.h"
 #include "qed_vf.h"
+#include "qed_roce.h"
 
 static DEFINE_SPINLOCK(qm_lock);
 
+#define QED_MIN_DPIS            (4)
+#define QED_MIN_PWM_REGION      (QED_WID_SIZE * QED_MIN_DPIS)
+
 /* API common to all protocols */
 enum BAR_ID {
 	BAR_ID_0,       /* used for GRC */
@@ -787,6 +791,136 @@ static int qed_hw_init_common(struct qed_hwfn *p_hwfn,
 	return rc;
 }
 
+static int
+qed_hw_init_dpi_size(struct qed_hwfn *p_hwfn,
+		     struct qed_ptt *p_ptt, u32 pwm_region_size, u32 n_cpus)
+{
+	u32 dpi_page_size_1, dpi_page_size_2, dpi_page_size;
+	u32 dpi_bit_shift, dpi_count;
+	u32 min_dpis;
+
+	/* Calculate DPI size */
+	dpi_page_size_1 = QED_WID_SIZE * n_cpus;
+	dpi_page_size_2 = max_t(u32, QED_WID_SIZE, PAGE_SIZE);
+	dpi_page_size = max_t(u32, dpi_page_size_1, dpi_page_size_2);
+	dpi_page_size = roundup_pow_of_two(dpi_page_size);
+	dpi_bit_shift = ilog2(dpi_page_size / 4096);
+
+	dpi_count = pwm_region_size / dpi_page_size;
+
+	min_dpis = p_hwfn->pf_params.rdma_pf_params.min_dpis;
+	min_dpis = max_t(u32, QED_MIN_DPIS, min_dpis);
+
+	p_hwfn->dpi_size = dpi_page_size;
+	p_hwfn->dpi_count = dpi_count;
+
+	qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_DPI_BIT_SHIFT, dpi_bit_shift);
+
+	if (dpi_count < min_dpis)
+		return -EINVAL;
+
+	return 0;
+}
+
+enum QED_ROCE_EDPM_MODE {
+	QED_ROCE_EDPM_MODE_ENABLE = 0,
+	QED_ROCE_EDPM_MODE_FORCE_ON = 1,
+	QED_ROCE_EDPM_MODE_DISABLE = 2,
+};
+
+static int
+qed_hw_init_pf_doorbell_bar(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
+{
+	u32 pwm_regsize, norm_regsize;
+	u32 non_pwm_conn, min_addr_reg1;
+	u32 db_bar_size, n_cpus;
+	u32 roce_edpm_mode;
+	u32 pf_dems_shift;
+	int rc = 0;
+	u8 cond;
+
+	db_bar_size = qed_hw_bar_size(p_hwfn, BAR_ID_1);
+	if (p_hwfn->cdev->num_hwfns > 1)
+		db_bar_size /= 2;
+
+	/* Calculate doorbell regions */
+	non_pwm_conn = qed_cxt_get_proto_cid_start(p_hwfn, PROTOCOLID_CORE) +
+		       qed_cxt_get_proto_cid_count(p_hwfn, PROTOCOLID_CORE,
+						   NULL) +
+		       qed_cxt_get_proto_cid_count(p_hwfn, PROTOCOLID_ETH,
+						   NULL);
+	norm_regsize = roundup(QED_PF_DEMS_SIZE * non_pwm_conn, 4096);
+	min_addr_reg1 = norm_regsize / 4096;
+	pwm_regsize = db_bar_size - norm_regsize;
+
+	/* Check that the normal and PWM sizes are valid */
+	if (db_bar_size < norm_regsize) {
+		DP_ERR(p_hwfn->cdev,
+		       "Doorbell BAR size 0x%x is too small (normal region is 0x%0x )\n",
+		       db_bar_size, norm_regsize);
+		return -EINVAL;
+	}
+
+	if (pwm_regsize < QED_MIN_PWM_REGION) {
+		DP_ERR(p_hwfn->cdev,
+		       "PWM region size 0x%0x is too small. Should be at least 0x%0x (Doorbell BAR size is 0x%x and normal region size is 0x%0x)\n",
+		       pwm_regsize,
+		       QED_MIN_PWM_REGION, db_bar_size, norm_regsize);
+		return -EINVAL;
+	}
+
+	/* Calculate number of DPIs */
+	roce_edpm_mode = p_hwfn->pf_params.rdma_pf_params.roce_edpm_mode;
+	if ((roce_edpm_mode == QED_ROCE_EDPM_MODE_ENABLE) ||
+	    ((roce_edpm_mode == QED_ROCE_EDPM_MODE_FORCE_ON))) {
+		/* Either EDPM is mandatory, or we are attempting to allocate a
+		 * WID per CPU.
+		 */
+		n_cpus = num_active_cpus();
+		rc = qed_hw_init_dpi_size(p_hwfn, p_ptt, pwm_regsize, n_cpus);
+	}
+
+	cond = (rc && (roce_edpm_mode == QED_ROCE_EDPM_MODE_ENABLE)) ||
+	       (roce_edpm_mode == QED_ROCE_EDPM_MODE_DISABLE);
+	if (cond || p_hwfn->dcbx_no_edpm) {
+		/* Either EDPM is disabled from user configuration, or it is
+		 * disabled via DCBx, or it is not mandatory and we failed to
+		 * allocated a WID per CPU.
+		 */
+		n_cpus = 1;
+		rc = qed_hw_init_dpi_size(p_hwfn, p_ptt, pwm_regsize, n_cpus);
+
+		if (cond)
+			qed_rdma_dpm_bar(p_hwfn, p_ptt);
+	}
+
+	DP_INFO(p_hwfn,
+		"doorbell bar: normal_region_size=%d, pwm_region_size=%d, dpi_size=%d, dpi_count=%d, roce_edpm=%s\n",
+		norm_regsize,
+		pwm_regsize,
+		p_hwfn->dpi_size,
+		p_hwfn->dpi_count,
+		((p_hwfn->dcbx_no_edpm) || (p_hwfn->db_bar_no_edpm)) ?
+		"disabled" : "enabled");
+
+	if (rc) {
+		DP_ERR(p_hwfn,
+		       "Failed to allocate enough DPIs. Allocated %d but the current minimum is %d.\n",
+		       p_hwfn->dpi_count,
+		       p_hwfn->pf_params.rdma_pf_params.min_dpis);
+		return -EINVAL;
+	}
+
+	p_hwfn->dpi_start_offset = norm_regsize;
+
+	/* DEMS size is configured log2 of DWORDs, hence the division by 4 */
+	pf_dems_shift = ilog2(QED_PF_DEMS_SIZE / 4);
+	qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_ICID_BIT_SHIFT_NORM, pf_dems_shift);
+	qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_MIN_ADDR_REG1, min_addr_reg1);
+
+	return 0;
+}
+
 static int qed_hw_init_port(struct qed_hwfn *p_hwfn,
 			    struct qed_ptt *p_ptt, int hw_mode)
 {
@@ -860,6 +994,10 @@ static int qed_hw_init_pf(struct qed_hwfn *p_hwfn,
 	/* Pure runtime initializations - directly to the HW  */
 	qed_int_igu_init_pure_rt(p_hwfn, p_ptt, true, true);
 
+	rc = qed_hw_init_pf_doorbell_bar(p_hwfn, p_ptt);
+	if (rc)
+		return rc;
+
 	if (b_hw_start) {
 		/* enable interrupts */
 		qed_int_igu_enable(p_hwfn, p_ptt, int_mode);
@@ -1284,6 +1422,19 @@ static void qed_hw_set_feat(struct qed_hwfn *p_hwfn)
 	u32 *feat_num = p_hwfn->hw_info.feat_num;
 	int num_features = 1;
 
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+	/* Roce CNQ each requires: 1 status block + 1 CNQ. We divide the
+	 * status blocks equally between L2 / RoCE but with consideration as
+	 * to how many l2 queues / cnqs we have
+	 */
+	if (p_hwfn->hw_info.personality == QED_PCI_ETH_ROCE) {
+		num_features++;
+
+		feat_num[QED_RDMA_CNQ] =
+			min_t(u32, RESC_NUM(p_hwfn, QED_SB) / num_features,
+			      RESC_NUM(p_hwfn, QED_RDMA_CNQ_RAM));
+	}
+#endif
 	feat_num[QED_PF_L2_QUE] = min_t(u32, RESC_NUM(p_hwfn, QED_SB) /
 						num_features,
 					RESC_NUM(p_hwfn, QED_L2_QUEUE));
@@ -1325,6 +1476,9 @@ static int qed_hw_get_resc(struct qed_hwfn *p_hwfn)
 			     num_funcs;
 	resc_num[QED_ILT] = PXP_NUM_ILT_RECORDS_BB / num_funcs;
 	resc_num[QED_LL2_QUEUE] = MAX_NUM_LL2_RX_QUEUES / num_funcs;
+	resc_num[QED_RDMA_CNQ_RAM] = NUM_OF_CMDQS_CQS / num_funcs;
+	resc_num[QED_RDMA_STATS_QUEUE] = RDMA_NUM_STATISTIC_COUNTERS_BB /
+					 num_funcs;
 
 	for (i = 0; i < QED_MAX_RESC; i++)
 		resc_start[i] = resc_num[i] * enabled_func_idx;

drivers/net/ethernet/qlogic/qed/qed_main.c

@@ -33,6 +33,11 @@
 #include "qed_hw.h"
 #include "qed_selftest.h"
 
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+#define QED_ROCE_QPS			(8192)
+#define QED_ROCE_DPIS			(8)
+#endif
+
 static char version[] =
 	"QLogic FastLinQ 4xxxx Core Module qed " DRV_MODULE_VERSION "\n";
 
@@ -206,8 +211,8 @@ int qed_fill_dev_info(struct qed_dev *cdev,
 	dev_info->pci_mem_start = cdev->pci_params.mem_start;
 	dev_info->pci_mem_end = cdev->pci_params.mem_end;
 	dev_info->pci_irq = cdev->pci_params.irq;
-	dev_info->rdma_supported =
-	    (cdev->hwfns[0].hw_info.personality == QED_PCI_ETH_ROCE);
+	dev_info->rdma_supported = (cdev->hwfns[0].hw_info.personality ==
+				    QED_PCI_ETH_ROCE);
 	dev_info->is_mf_default = IS_MF_DEFAULT(&cdev->hwfns[0]);
 	ether_addr_copy(dev_info->hw_mac, cdev->hwfns[0].hw_info.hw_mac_addr);
 
@@ -677,6 +682,9 @@ static int qed_slowpath_setup_int(struct qed_dev *cdev,
 				  enum qed_int_mode int_mode)
 {
 	struct qed_sb_cnt_info sb_cnt_info;
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+	int num_l2_queues;
+#endif
 	int rc;
 	int i;
 
@@ -707,6 +715,31 @@ static int qed_slowpath_setup_int(struct qed_dev *cdev,
 	cdev->int_params.fp_msix_cnt = cdev->int_params.out.num_vectors -
 				       cdev->num_hwfns;
 
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+	num_l2_queues = 0;
+	for_each_hwfn(cdev, i)
+		num_l2_queues += FEAT_NUM(&cdev->hwfns[i], QED_PF_L2_QUE);
+
+	DP_VERBOSE(cdev, QED_MSG_RDMA,
+		   "cdev->int_params.fp_msix_cnt=%d num_l2_queues=%d\n",
+		   cdev->int_params.fp_msix_cnt, num_l2_queues);
+
+	if (cdev->int_params.fp_msix_cnt > num_l2_queues) {
+		cdev->int_params.rdma_msix_cnt =
+			(cdev->int_params.fp_msix_cnt - num_l2_queues)
+			/ cdev->num_hwfns;
+		cdev->int_params.rdma_msix_base =
+			cdev->int_params.fp_msix_base + num_l2_queues;
+		cdev->int_params.fp_msix_cnt = num_l2_queues;
+	} else {
+		cdev->int_params.rdma_msix_cnt = 0;
+	}
+
+	DP_VERBOSE(cdev, QED_MSG_RDMA, "roce_msix_cnt=%d roce_msix_base=%d\n",
+		   cdev->int_params.rdma_msix_cnt,
+		   cdev->int_params.rdma_msix_base);
+#endif
+
 	return 0;
 }
 
@@ -810,6 +843,13 @@ static void qed_update_pf_params(struct qed_dev *cdev,
 {
 	int i;
 
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+	params->rdma_pf_params.num_qps = QED_ROCE_QPS;
+	params->rdma_pf_params.min_dpis = QED_ROCE_DPIS;
+	/* divide by 3 the MRs to avoid MF ILT overflow */
+	params->rdma_pf_params.num_mrs = RDMA_MAX_TIDS;
+	params->rdma_pf_params.gl_pi = QED_ROCE_PROTOCOL_INDEX;
+#endif
 	for (i = 0; i < cdev->num_hwfns; i++) {
 		struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
 

drivers/net/ethernet/qlogic/qed/qed_reg_addr.h

@@ -1448,5 +1448,11 @@
 	0x620000UL
 #define PHY_PCIE_REG_PHY1 \
 	0x624000UL
-
+#define NIG_REG_ROCE_DUPLICATE_TO_HOST 0x5088f0UL
+#define PRS_REG_LIGHT_L2_ETHERTYPE_EN 0x1f0968UL
+#define NIG_REG_LLH_ENG_CLS_ENG_ID_TBL 0x501b90UL
+#define DORQ_REG_PF_DPM_ENABLE 0x100510UL
+#define DORQ_REG_PF_ICID_BIT_SHIFT_NORM	0x100448UL
+#define DORQ_REG_PF_MIN_ADDR_REG1 0x100400UL
+#define DORQ_REG_PF_DPI_BIT_SHIFT 0x100450UL
 #endif

drivers/net/ethernet/qlogic/qed/qed_roce.h

+/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2016  QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and /or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _QED_ROCE_H
+#define _QED_ROCE_H
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/qed/qed_if.h>
+#include <linux/qed/qed_roce_if.h>
+#include "qed.h"
+#include "qed_dev_api.h"
+#include "qed_hsi.h"
+
+#define QED_RDMA_MAX_FMR                    (RDMA_MAX_TIDS)
+#define QED_RDMA_MAX_P_KEY                  (1)
+#define QED_RDMA_MAX_WQE                    (0x7FFF)
+#define QED_RDMA_MAX_SRQ_WQE_ELEM           (0x7FFF)
+#define QED_RDMA_PAGE_SIZE_CAPS             (0xFFFFF000)
+#define QED_RDMA_ACK_DELAY                  (15)
+#define QED_RDMA_MAX_MR_SIZE                (0x10000000000ULL)
+#define QED_RDMA_MAX_CQS                    (RDMA_MAX_CQS)
+#define QED_RDMA_MAX_MRS                    (RDMA_MAX_TIDS)
+/* Add 1 for header element */
+#define QED_RDMA_MAX_SRQ_ELEM_PER_WQE	    (RDMA_MAX_SGE_PER_RQ_WQE + 1)
+#define QED_RDMA_MAX_SGE_PER_SRQ_WQE        (RDMA_MAX_SGE_PER_RQ_WQE)
+#define QED_RDMA_SRQ_WQE_ELEM_SIZE          (16)
+#define QED_RDMA_MAX_SRQS                   (32 * 1024)
+
+#define QED_RDMA_MAX_CQE_32_BIT             (0x7FFFFFFF - 1)
+#define QED_RDMA_MAX_CQE_16_BIT             (0x7FFF - 1)
+
+enum qed_rdma_toggle_bit {
+	QED_RDMA_TOGGLE_BIT_CLEAR = 0,
+	QED_RDMA_TOGGLE_BIT_SET = 1
+};
+
+struct qed_bmap {
+	unsigned long *bitmap;
+	u32 max_count;
+};
+
+struct qed_rdma_info {
+	/* spin lock to protect bitmaps */
+	spinlock_t lock;
+
+	struct qed_bmap cq_map;
+	struct qed_bmap pd_map;
+	struct qed_bmap tid_map;
+	struct qed_bmap qp_map;
+	struct qed_bmap srq_map;
+	struct qed_bmap cid_map;
+	struct qed_bmap dpi_map;
+	struct qed_bmap toggle_bits;
+	struct qed_rdma_events events;
+	struct qed_rdma_device *dev;
+	struct qed_rdma_port *port;
+	u32 last_tid;
+	u8 num_cnqs;
+	u32 num_qps;
+	u32 num_mrs;
+	u16 queue_zone_base;
+	enum protocol_type proto;
+};
+
+int
+qed_rdma_add_user(void *rdma_cxt,
+		  struct qed_rdma_add_user_out_params *out_params);
+int qed_rdma_alloc_pd(void *rdma_cxt, u16 *pd);
+int qed_rdma_alloc_tid(void *rdma_cxt, u32 *tid);
+int qed_rdma_deregister_tid(void *rdma_cxt, u32 tid);
+void qed_rdma_free_tid(void *rdma_cxt, u32 tid);
+struct qed_rdma_device *qed_rdma_query_device(void *rdma_cxt);
+int
+qed_rdma_register_tid(void *rdma_cxt,
+		      struct qed_rdma_register_tid_in_params *params);
+void qed_rdma_remove_user(void *rdma_cxt, u16 dpi);
+int qed_rdma_start(void *p_hwfn, struct qed_rdma_start_in_params *params);
+int qed_rdma_stop(void *rdma_cxt);
+u32 qed_rdma_get_sb_id(void *p_hwfn, u32 rel_sb_id);
+u32 qed_rdma_query_cau_timer_res(void *p_hwfn);
+void qed_rdma_cnq_prod_update(void *rdma_cxt, u8 cnq_index, u16 prod);
+void qed_rdma_resc_free(struct qed_hwfn *p_hwfn);
+void qed_async_roce_event(struct qed_hwfn *p_hwfn,
+			  struct event_ring_entry *p_eqe);
+
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+void qed_rdma_dpm_bar(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
+#else
+void qed_rdma_dpm_bar(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) {}
+#endif
+#endif

drivers/net/ethernet/qlogic/qed/qed_sp.h

@@ -85,6 +85,7 @@ union ramrod_data {
 	struct rdma_srq_create_ramrod_data rdma_create_srq;
 	struct rdma_srq_destroy_ramrod_data rdma_destroy_srq;
 	struct rdma_srq_modify_ramrod_data rdma_modify_srq;
+	struct roce_init_func_ramrod_data roce_init_func;
 
 	struct iscsi_slow_path_hdr iscsi_empty;
 	struct iscsi_init_ramrod_params iscsi_init;

drivers/net/ethernet/qlogic/qed/qed_spq.c

@@ -28,6 +28,9 @@
 #include "qed_reg_addr.h"
 #include "qed_sp.h"
 #include "qed_sriov.h"
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+#include "qed_roce.h"
+#endif
 
 /***************************************************************************
 * Structures & Definitions
@@ -237,6 +240,11 @@ qed_async_event_completion(struct qed_hwfn *p_hwfn,
 			   struct event_ring_entry *p_eqe)
 {
 	switch (p_eqe->protocol_id) {
+#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
+	case PROTOCOLID_ROCE:
+		qed_async_roce_event(p_hwfn, p_eqe);
+		return 0;
+#endif
 	case PROTOCOLID_COMMON:
 		return qed_sriov_eqe_event(p_hwfn,
 					   p_eqe->opcode,

drivers/net/ethernet/qlogic/qed/qed_sriov.c

@@ -1851,8 +1851,8 @@ static void qed_iov_vf_mbx_start_txq_resp(struct qed_hwfn *p_hwfn,
 	if ((status == PFVF_STATUS_SUCCESS) && !b_legacy) {
 		u16 qid = mbx->req_virt->start_txq.tx_qid;
 
-		p_tlv->offset = qed_db_addr(p_vf->vf_queues[qid].fw_cid,
-					    DQ_DEMS_LEGACY);
+		p_tlv->offset = qed_db_addr_vf(p_vf->vf_queues[qid].fw_cid,
+					       DQ_DEMS_LEGACY);
 	}
 
 	qed_iov_send_response(p_hwfn, p_ptt, p_vf, length, status);

drivers/net/ethernet/qlogic/qed/qed_vf.c

@@ -544,7 +544,7 @@ int qed_vf_pf_txq_start(struct qed_hwfn *p_hwfn,
 			u8 cid = p_iov->acquire_resp.resc.cid[tx_queue_id];
 			u32 db_addr;
 
-			db_addr = qed_db_addr(cid, DQ_DEMS_LEGACY);
+			db_addr = qed_db_addr_vf(cid, DQ_DEMS_LEGACY);
 			*pp_doorbell = (u8 __iomem *)p_hwfn->doorbells +
 						     db_addr;
 		}

include/linux/qed/common_hsi.h

@@ -674,6 +674,7 @@ union event_ring_data {
 	struct iscsi_eqe_data iscsi_info;
 	struct malicious_vf_eqe_data malicious_vf;
 	struct initial_cleanup_eqe_data vf_init_cleanup;
+	struct regpair roce_handle;
 };
 
 /* Event Ring Entry */

include/linux/qed/qed_if.h

@@ -34,6 +34,8 @@ enum dcbx_protocol_type {
 	DCBX_MAX_PROTOCOL_TYPE
 };
 
+#define QED_ROCE_PROTOCOL_INDEX (3)
+
 #ifdef CONFIG_DCB
 #define QED_LLDP_CHASSIS_ID_STAT_LEN 4
 #define QED_LLDP_PORT_ID_STAT_LEN 4
@@ -268,6 +270,7 @@ struct qed_dev_info {
 
 enum qed_sb_type {
 	QED_SB_TYPE_L2_QUEUE,
+	QED_SB_TYPE_CNQ,
 };
 
 enum qed_protocol {
@@ -628,7 +631,7 @@ enum DP_MODULE {
 	QED_MSG_CXT	= 0x800000,
 	QED_MSG_LL2	= 0x1000000,
 	QED_MSG_ILT	= 0x2000000,
-	QED_MSG_ROCE	= 0x4000000,
+	QED_MSG_RDMA	= 0x4000000,
 	QED_MSG_DEBUG	= 0x8000000,
 	/* to be added...up to 0x8000000 */
 };

include/linux/qed/qed_roce_if.h

+/* QLogic qed NIC Driver
+ * Copyright (c) 2015-2016  QLogic Corporation
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and /or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _QED_ROCE_IF_H
+#define _QED_ROCE_IF_H
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/qed/qed_if.h>
+#include <linux/qed/qed_ll2_if.h>
+
+#define QED_RDMA_MAX_CNQ_SIZE               (0xFFFF)
+
+/* rdma interface */
+enum qed_rdma_tid_type {
+	QED_RDMA_TID_REGISTERED_MR,
+	QED_RDMA_TID_FMR,
+	QED_RDMA_TID_MW_TYPE1,
+	QED_RDMA_TID_MW_TYPE2A
+};
+
+struct qed_rdma_events {
+	void *context;
+	void (*affiliated_event)(void *context, u8 fw_event_code,
+				 void *fw_handle);
+	void (*unaffiliated_event)(void *context, u8 event_code);
+};
+
+struct qed_rdma_device {
+	u32 vendor_id;
+	u32 vendor_part_id;
+	u32 hw_ver;
+	u64 fw_ver;
+
+	u64 node_guid;
+	u64 sys_image_guid;
+
+	u8 max_cnq;
+	u8 max_sge;
+	u8 max_srq_sge;
+	u16 max_inline;
+	u32 max_wqe;
+	u32 max_srq_wqe;
+	u8 max_qp_resp_rd_atomic_resc;
+	u8 max_qp_req_rd_atomic_resc;
+	u64 max_dev_resp_rd_atomic_resc;
+	u32 max_cq;
+	u32 max_qp;
+	u32 max_srq;
+	u32 max_mr;
+	u64 max_mr_size;
+	u32 max_cqe;
+	u32 max_mw;
+	u32 max_fmr;
+	u32 max_mr_mw_fmr_pbl;
+	u64 max_mr_mw_fmr_size;
+	u32 max_pd;
+	u32 max_ah;
+	u8 max_pkey;
+	u16 max_srq_wr;
+	u8 max_stats_queues;
+	u32 dev_caps;
+
+	/* Abilty to support RNR-NAK generation */
+
+#define QED_RDMA_DEV_CAP_RNR_NAK_MASK                           0x1
+#define QED_RDMA_DEV_CAP_RNR_NAK_SHIFT                  0
+	/* Abilty to support shutdown port */
+#define QED_RDMA_DEV_CAP_SHUTDOWN_PORT_MASK                     0x1
+#define QED_RDMA_DEV_CAP_SHUTDOWN_PORT_SHIFT                    1
+	/* Abilty to support port active event */
+#define QED_RDMA_DEV_CAP_PORT_ACTIVE_EVENT_MASK         0x1
+#define QED_RDMA_DEV_CAP_PORT_ACTIVE_EVENT_SHIFT                2
+	/* Abilty to support port change event */
+#define QED_RDMA_DEV_CAP_PORT_CHANGE_EVENT_MASK         0x1
+#define QED_RDMA_DEV_CAP_PORT_CHANGE_EVENT_SHIFT                3
+	/* Abilty to support system image GUID */
+#define QED_RDMA_DEV_CAP_SYS_IMAGE_MASK                 0x1
+#define QED_RDMA_DEV_CAP_SYS_IMAGE_SHIFT                        4
+	/* Abilty to support bad P_Key counter support */
+#define QED_RDMA_DEV_CAP_BAD_PKEY_CNT_MASK                      0x1
+#define QED_RDMA_DEV_CAP_BAD_PKEY_CNT_SHIFT                     5
+	/* Abilty to support atomic operations */
+#define QED_RDMA_DEV_CAP_ATOMIC_OP_MASK                 0x1
+#define QED_RDMA_DEV_CAP_ATOMIC_OP_SHIFT                        6
+#define QED_RDMA_DEV_CAP_RESIZE_CQ_MASK                 0x1
+#define QED_RDMA_DEV_CAP_RESIZE_CQ_SHIFT                        7
+	/* Abilty to support modifying the maximum number of
+	 * outstanding work requests per QP
+	 */
+#define QED_RDMA_DEV_CAP_RESIZE_MAX_WR_MASK                     0x1
+#define QED_RDMA_DEV_CAP_RESIZE_MAX_WR_SHIFT                    8
+	/* Abilty to support automatic path migration */
+#define QED_RDMA_DEV_CAP_AUTO_PATH_MIG_MASK                     0x1
+#define QED_RDMA_DEV_CAP_AUTO_PATH_MIG_SHIFT                    9
+	/* Abilty to support the base memory management extensions */
+#define QED_RDMA_DEV_CAP_BASE_MEMORY_EXT_MASK                   0x1
+#define QED_RDMA_DEV_CAP_BASE_MEMORY_EXT_SHIFT          10
+#define QED_RDMA_DEV_CAP_BASE_QUEUE_EXT_MASK                    0x1
+#define QED_RDMA_DEV_CAP_BASE_QUEUE_EXT_SHIFT                   11
+	/* Abilty to support multipile page sizes per memory region */
+#define QED_RDMA_DEV_CAP_MULTI_PAGE_PER_MR_EXT_MASK             0x1
+#define QED_RDMA_DEV_CAP_MULTI_PAGE_PER_MR_EXT_SHIFT            12
+	/* Abilty to support block list physical buffer list */
+#define QED_RDMA_DEV_CAP_BLOCK_MODE_MASK                        0x1
+#define QED_RDMA_DEV_CAP_BLOCK_MODE_SHIFT                       13
+	/* Abilty to support zero based virtual addresses */
+#define QED_RDMA_DEV_CAP_ZBVA_MASK                              0x1
+#define QED_RDMA_DEV_CAP_ZBVA_SHIFT                             14
+	/* Abilty to support local invalidate fencing */
+#define QED_RDMA_DEV_CAP_LOCAL_INV_FENCE_MASK                   0x1
+#define QED_RDMA_DEV_CAP_LOCAL_INV_FENCE_SHIFT          15
+	/* Abilty to support Loopback on QP */
+#define QED_RDMA_DEV_CAP_LB_INDICATOR_MASK                      0x1
+#define QED_RDMA_DEV_CAP_LB_INDICATOR_SHIFT                     16
+	u64 page_size_caps;
+	u8 dev_ack_delay;
+	u32 reserved_lkey;
+	u32 bad_pkey_counter;
+	struct qed_rdma_events events;
+};
+
+enum qed_port_state {
+	QED_RDMA_PORT_UP,
+	QED_RDMA_PORT_DOWN,
+};
+
+enum qed_roce_capability {
+	QED_ROCE_V1 = 1 << 0,
+	QED_ROCE_V2 = 1 << 1,
+};
+
+struct qed_rdma_port {
+	enum qed_port_state port_state;
+	int link_speed;
+	u64 max_msg_size;
+	u8 source_gid_table_len;
+	void *source_gid_table_ptr;
+	u8 pkey_table_len;
+	void *pkey_table_ptr;
+	u32 pkey_bad_counter;
+	enum qed_roce_capability capability;
+};
+
+struct qed_rdma_cnq_params {
+	u8 num_pbl_pages;
+	u64 pbl_ptr;
+};
+
+/* The CQ Mode affects the CQ doorbell transaction size.
+ * 64/32 bit machines should configure to 32/16 bits respectively.
+ */
+enum qed_rdma_cq_mode {
+	QED_RDMA_CQ_MODE_16_BITS,
+	QED_RDMA_CQ_MODE_32_BITS,
+};
+
+struct qed_roce_dcqcn_params {
+	u8 notification_point;
+	u8 reaction_point;
+
+	/* fields for notification point */
+	u32 cnp_send_timeout;
+
+	/* fields for reaction point */
+	u32 rl_bc_rate;
+	u16 rl_max_rate;
+	u16 rl_r_ai;
+	u16 rl_r_hai;
+	u16 dcqcn_g;
+	u32 dcqcn_k_us;
+	u32 dcqcn_timeout_us;
+};
+
+struct qed_rdma_start_in_params {
+	struct qed_rdma_events *events;
+	struct qed_rdma_cnq_params cnq_pbl_list[128];
+	u8 desired_cnq;
+	enum qed_rdma_cq_mode cq_mode;
+	struct qed_roce_dcqcn_params dcqcn_params;
+	u16 max_mtu;
+	u8 mac_addr[ETH_ALEN];
+	u8 iwarp_flags;
+};
+
+struct qed_rdma_add_user_out_params {
+	u16 dpi;
+	u64 dpi_addr;
+	u64 dpi_phys_addr;
+	u32 dpi_size;
+};
+
+enum roce_mode {
+	ROCE_V1,
+	ROCE_V2_IPV4,
+	ROCE_V2_IPV6,
+	MAX_ROCE_MODE
+};
+
+union qed_gid {
+	u8 bytes[16];
+	u16 words[8];
+	u32 dwords[4];
+	u64 qwords[2];
+	u32 ipv4_addr;
+};
+
+struct qed_rdma_register_tid_in_params {
+	u32 itid;
+	enum qed_rdma_tid_type tid_type;
+	u8 key;
+	u16 pd;
+	bool local_read;
+	bool local_write;
+	bool remote_read;
+	bool remote_write;
+	bool remote_atomic;
+	bool mw_bind;
+	u64 pbl_ptr;
+	bool pbl_two_level;
+	u8 pbl_page_size_log;
+	u8 page_size_log;
+	u32 fbo;
+	u64 length;
+	u64 vaddr;
+	bool zbva;
+	bool phy_mr;
+	bool dma_mr;
+
+	bool dif_enabled;
+	u64 dif_error_addr;
+	u64 dif_runt_addr;
+};
+
+struct qed_rdma_create_srq_in_params {
+	u64 pbl_base_addr;
+	u64 prod_pair_addr;
+	u16 num_pages;
+	u16 pd_id;
+	u16 page_size;
+};
+
+struct qed_rdma_create_srq_out_params {
+	u16 srq_id;
+};
+
+struct qed_rdma_destroy_srq_in_params {
+	u16 srq_id;
+};
+
+struct qed_rdma_modify_srq_in_params {
+	u32 wqe_limit;
+	u16 srq_id;
+};
+
+struct qed_rdma_stats_out_params {
+	u64 sent_bytes;
+	u64 sent_pkts;
+	u64 rcv_bytes;
+	u64 rcv_pkts;
+};
+
+struct qed_rdma_counters_out_params {
+	u64 pd_count;
+	u64 max_pd;
+	u64 dpi_count;
+	u64 max_dpi;
+	u64 cq_count;
+	u64 max_cq;
+	u64 qp_count;
+	u64 max_qp;
+	u64 tid_count;
+	u64 max_tid;
+};
+
+#define QED_ROCE_TX_HEAD_FAILURE        (1)
+#define QED_ROCE_TX_FRAG_FAILURE        (2)
+
+enum qed_rdma_type {
+	QED_RDMA_TYPE_ROCE,
+};
+
+struct qed_dev_rdma_info {
+	struct qed_dev_info common;
+	enum qed_rdma_type rdma_type;
+};
+
+struct qed_rdma_ops {
+	const struct qed_common_ops *common;
+
+	int (*fill_dev_info)(struct qed_dev *cdev,
+			     struct qed_dev_rdma_info *info);
+	void *(*rdma_get_rdma_ctx)(struct qed_dev *cdev);
+
+	int (*rdma_init)(struct qed_dev *dev,
+			 struct qed_rdma_start_in_params *iparams);
+
+	int (*rdma_add_user)(void *rdma_cxt,
+			     struct qed_rdma_add_user_out_params *oparams);
+
+	void (*rdma_remove_user)(void *rdma_cxt, u16 dpi);
+	int (*rdma_stop)(void *rdma_cxt);
+	struct qed_rdma_device* (*rdma_query_device)(void *rdma_cxt);
+	int (*rdma_get_start_sb)(struct qed_dev *cdev);
+	int (*rdma_get_min_cnq_msix)(struct qed_dev *cdev);
+	void (*rdma_cnq_prod_update)(void *rdma_cxt, u8 cnq_index, u16 prod);
+	int (*rdma_get_rdma_int)(struct qed_dev *cdev,
+				 struct qed_int_info *info);
+	int (*rdma_set_rdma_int)(struct qed_dev *cdev, u16 cnt);
+};
+
+const struct qed_rdma_ops *qed_get_rdma_ops(void);
+
+#endif

include/linux/qed/rdma_common.h

@@ -28,6 +28,7 @@
 #define RDMA_MAX_PDS                            (64 * 1024)
 
 #define RDMA_NUM_STATISTIC_COUNTERS                     MAX_NUM_VPORTS
+#define RDMA_NUM_STATISTIC_COUNTERS_BB			MAX_NUM_VPORTS_BB
 
 #define RDMA_TASK_TYPE (PROTOCOLID_ROCE)